All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lyude Paul <lyude@redhat.com>
To: intel-gfx@lists.freedesktop.org
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>,
	"Rodrigo Vivi" <rodrigo.vivi@intel.com>,
	"Jani Nikula" <jani.nikula@linux.intel.com>,
	"Joonas Lahtinen" <joonas.lahtinen@linux.intel.com>,
	"David Airlie" <airlied@linux.ie>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 3/5] drm/i915: Fix threshold check in intel_hpd_irq_storm_detect()
Date: Mon,  5 Nov 2018 17:20:09 -0500	[thread overview]
Message-ID: <20181105222011.2913-4-lyude@redhat.com> (raw)
In-Reply-To: <20181105222011.2913-1-lyude@redhat.com>

Currently in intel_hpd_irq_storm_detect() when we detect that the last
recorded hotplug wasn't within the period defined by
HPD_STORM_DETECT_DELAY, we make the mistake of resetting the HPD count
to 0 without incrementing it. This results in us only enabling storm
detection when we go +2 above the threshold, e.g. an HPD threshold of 5
would not trigger a storm until we reach a total of 7 hotplugs.

So: rework the code a bit so we reset the HPD count when
HPD_STORM_DETECT_DELAY has passed, then increment the count afterwards.
Also, clean things up a bit to make it easier to undertand.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
 drivers/gpu/drm/i915/intel_hotplug.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c
index 8326900a311e..c11d73de16f2 100644
--- a/drivers/gpu/drm/i915/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/intel_hotplug.c
@@ -135,24 +135,27 @@ enum hpd_pin intel_hpd_pin_default(struct drm_i915_private *dev_priv,
 static bool intel_hpd_irq_storm_detect(struct drm_i915_private *dev_priv,
 				       enum hpd_pin pin)
 {
-	unsigned long start = dev_priv->hotplug.stats[pin].last_jiffies;
+	struct i915_hotplug *hpd = &dev_priv->hotplug;
+	unsigned long start = hpd->stats[pin].last_jiffies;
 	unsigned long end = start + msecs_to_jiffies(HPD_STORM_DETECT_PERIOD);
-	const int threshold = dev_priv->hotplug.hpd_storm_threshold;
+	const int threshold = hpd->hpd_storm_threshold;
 	bool storm = false;
 
+	if (!threshold)
+		return false;
+
 	if (!time_in_range(jiffies, start, end)) {
-		dev_priv->hotplug.stats[pin].last_jiffies = jiffies;
-		dev_priv->hotplug.stats[pin].count = 0;
-		DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: 0\n", pin);
-	} else if (dev_priv->hotplug.stats[pin].count > threshold &&
-		   threshold) {
-		dev_priv->hotplug.stats[pin].state = HPD_MARK_DISABLED;
+		hpd->stats[pin].last_jiffies = jiffies;
+		hpd->stats[pin].count = 0;
+	}
+
+	if (++hpd->stats[pin].count > threshold) {
+		hpd->stats[pin].state = HPD_MARK_DISABLED;
 		DRM_DEBUG_KMS("HPD interrupt storm detected on PIN %d\n", pin);
 		storm = true;
 	} else {
-		dev_priv->hotplug.stats[pin].count++;
 		DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: %d\n", pin,
-			      dev_priv->hotplug.stats[pin].count);
+			      hpd->stats[pin].count);
 	}
 
 	return storm;
-- 
2.19.1


  parent reply	other threads:[~2018-11-05 22:20 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-05 22:20 [PATCH v4 0/5] drm/i915: HPD IRQ storm detection fixes Lyude Paul
2018-11-05 22:20 ` [PATCH v4 1/5] drm/i915: Fix possible race in intel_dp_add_mst_connector() Lyude Paul
2018-11-05 22:20 ` [PATCH v4 2/5] drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MST Lyude Paul
2018-11-05 22:20 ` Lyude Paul [this message]
2018-11-06 13:43   ` [PATCH v4 3/5] drm/i915: Fix threshold check in intel_hpd_irq_storm_detect() Ville Syrjälä
2018-11-05 22:20 ` [PATCH v4 4/5] drm/i915: Clarify flow for disabling IRQs on storms Lyude Paul
2018-11-06 13:51   ` Ville Syrjälä
2018-11-06 13:51     ` Ville Syrjälä
2018-11-05 22:20 ` [PATCH v4 5/5] drm/i915: Add short HPD IRQ storm detection for non-MST systems Lyude Paul
2018-11-06 13:50   ` Ville Syrjälä
2018-11-05 22:50 ` ✗ Fi.CI.SPARSE: warning for drm/i915: HPD IRQ storm detection fixes (rev4) Patchwork
2018-11-06  8:40 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-06 12:52 ` ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181105222011.2913-4-lyude@redhat.com \
    --to=lyude@redhat.com \
    --cc=airlied@linux.ie \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=joonas.lahtinen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rodrigo.vivi@intel.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.