All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [v6 1/4] i915/dp/fec: Add fec_enable to the crtc state.
Date: Mon, 5 Nov 2018 16:36:45 -0800	[thread overview]
Message-ID: <20181106003645.GA3828@intel.com> (raw)
In-Reply-To: <20181105233150.1972-2-anusha.srivatsa@intel.com>

On Mon, Nov 05, 2018 at 03:31:47PM -0800, Anusha Srivatsa wrote:
> For DP 1.4 and above, Display Stream compression can be
> enabled only if Forward Error Correctin can be performed.
> 
> Add a crtc state for FEC. Currently, the state
> is determined by platform, DP and DSC being
> enabled. Moving forward we can use the state
> to have error correction on other scenarios too
> if needed.
> 
> v2:
> - Control compression_enable with the fec_enable
> parameter in crtc state and with intel_dp_supports_fec()
> (Ville)
> 
> - intel_dp_can_fec()/intel_dp_supports_fec()(manasi)
> 
> v3: Check for FEC support along with setting crtc state.
> 
> v4: add checks to intel_dp_source_supports_dsc.(manasi)
> - Move intel_dp_supports_fec() closer to
> intel_dp_supports_dsc() (Anusha)
> 
> Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Manasi Navare <manasi.d.navare@intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c  | 28 +++++++++++++++++++++++++---
>  drivers/gpu/drm/i915/intel_drv.h |  3 +++
>  2 files changed, 28 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 73c00c5acf14..60e323662eea 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -545,7 +545,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
>  			dsc_slice_count =
>  				drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
>  								true);
> -		} else {
> +		} else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) {
>  			dsc_max_output_bpp =
>  				intel_dp_dsc_get_output_bpp(max_link_clock,
>  							    max_lanes,
> @@ -1710,13 +1710,27 @@ struct link_config_limits {
>  	int min_bpp, max_bpp;
>  };
>  
> +static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp)
> +{
> +	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> +	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
> +	enum port port = dig_port->base.port;
> +
> +	return INTEL_GEN(dev_priv) >= 11 && port != PORT_A;
> +}
> +
> +static bool intel_dp_supports_fec(struct intel_dp *intel_dp)
> +{
> +	return intel_dp_source_supports_fec(intel_dp) &&
> +		drm_dp_sink_supports_fec(intel_dp->fec_capable);
> +}
> +
>  static bool intel_dp_source_supports_dsc(struct intel_dp *intel_dp,
>  					 const struct intel_crtc_state *pipe_config)
>  {
>  	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
>  
> -	/* FIXME: FEC needed for external DP until then reject DSC on DP */
> -	if (!intel_dp_is_edp(intel_dp))
> +	if (!intel_dp_supports_fec(intel_dp) && !intel_dp_is_edp(intel_dp))
>  		return false;
>  
>  	return INTEL_GEN(dev_priv) >= 10 &&
> @@ -1886,9 +1900,17 @@ static bool intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
>  	u16 dsc_max_output_bpp = 0;
>  	u8 dsc_dp_slice_count = 0;
>  
> +	pipe_config->fec_enable = !intel_dp_is_edp(intel_dp);

fec_enable state be set based on !intel_dp_is_edp() && intel_dp_supports_fec()
Because we enable fec in atomic ocmmit just based on this crtc_state->fec_enable so
it should definitely be set based on intel_dp_supports_fec()

> +
>  	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
>  		return false;
>  
> +	/* DSC not supported if external DP sink does not support FEC */
> +	if (pipe_config->fec_enable && !intel_dp_supports_fec(intel_dp)) {

Then here just check for if (pipe_config->fec_enable)

Manasi

> +		DRM_DEBUG_KMS("Sink does not support Forward Error Correction, disabling Display Compression\n");
> +		return false;
> +	}
> +
>  	/* DSC not supported for DSC sink BPC < 8 */
>  	if (limits->max_bpp < 3 * DP_DSC_MIN_SUPPORTED_BPC) {
>  		DRM_DEBUG_KMS("No DSC support for less than 8bpc\n");
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index dd22cdeaa673..997bea5fdf16 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -945,6 +945,9 @@ struct intel_crtc_state {
>  		u8 slice_count;
>  	} dsc_params;
>  	struct drm_dsc_config dp_dsc_cfg;
> +
> +	/* Forward Error correction State */
> +	bool fec_enable;
>  };
>  
>  struct intel_crtc {
> -- 
> 2.19.1
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-11-06  0:36 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-05 23:31 [v6 0/4] Forward Error Correction Anusha Srivatsa
2018-11-05 23:31 ` [v6 1/4] i915/dp/fec: Add fec_enable to the crtc state Anusha Srivatsa
2018-11-06  0:36   ` Manasi Navare [this message]
2018-11-06 14:53   ` Ville Syrjälä
2018-11-05 23:31 ` [v6 2/4] drm/i915/fec: Set FEC_READY in FEC_CONFIGURATION Anusha Srivatsa
2018-11-06  0:48   ` Manasi Navare
2018-11-06 14:51     ` Ville Syrjälä
2018-11-06 16:47       ` Manasi Navare
2018-11-05 23:31 ` [v6 3/4] i915/dp/fec: Configure the Forward Error Correction bits Anusha Srivatsa
2018-11-06 22:41   ` Manasi Navare
2018-11-06 23:37     ` Srivatsa, Anusha
2018-11-05 23:31 ` [v6 4/4] drm/i915/fec: Disable FEC state Anusha Srivatsa
2018-11-06 22:31   ` Manasi Navare
2018-11-05 23:54 ` ✗ Fi.CI.BAT: failure for Forward Error Correction (rev6) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181106003645.GA3828@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=anusha.srivatsa@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.