From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew F. Davis Date: Fri, 30 Nov 2018 11:11:23 -0600 Subject: [U-Boot] [PATCH 7/7] doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI In-Reply-To: <20181130171123.23009-1-afd@ti.com> References: <20181130171123.23009-1-afd@ti.com> Message-ID: <20181130171123.23009-8-afd@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Booting from UART and USB on HS devices is now supported for this platform. Update documentation for the same. Signed-off-by: Andrew F. Davis --- doc/README.ti-secure | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/doc/README.ti-secure b/doc/README.ti-secure index 4b5380c0f3..76950253ac 100644 --- a/doc/README.ti-secure +++ b/doc/README.ti-secure @@ -108,7 +108,8 @@ Booting of U-Boot SPL Invoking the script for DRA7xx/AM57xx Secure Devices ==================================================== - create-boot-image.sh + create-boot-image.sh \ + is a value that specifies the type of the image to generate OR the action the image generation tool will take. Valid @@ -116,7 +117,6 @@ Booting of U-Boot SPL X-LOADER - Generates an image for NOR or QSPI boot modes MLO - Generates an image for SD/MMC/eMMC boot modes ULO - Generates an image for USB/UART peripheral boot modes - Note: ULO is not yet used by the u-boot build process is the full path and filename of the public world boot loader binary file (for this platform, this is always u-boot-spl.bin). @@ -130,9 +130,13 @@ Booting of U-Boot SPL the device ROM bootloader requires for loading from the FAT partition of an SD card (same as on non-secure devices) + u-boot-spl_HS_ULO - boot image for USB/UART peripheral boot modes u-boot-spl_HS_X-LOADER - boot image for all other flash memories including QSPI and NOR flash + is the address at which SOC ROM should load the + + Invoking the script for Keystone2 Secure Devices ============================================= -- 2.19.1