All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut@gmail.com>
To: linux-gpio@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
	Marek Vasut <marek.vasut+renesas@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH 07/14] gpio: pca953x: Factor out common code from device_pca95xx_init()
Date: Sun,  2 Dec 2018 20:35:46 +0100	[thread overview]
Message-ID: <20181202193553.29704-7-marek.vasut+renesas@gmail.com> (raw)
In-Reply-To: <20181202193553.29704-1-marek.vasut+renesas@gmail.com>

The PCA957x and PCA953x init functions are almost the same, except for
the different register mapping and one extra write to BKEN register in
case of PCA957x. Factor out the common code.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/gpio/gpio-pca953x.c | 35 ++++++++++++-----------------------
 1 file changed, 12 insertions(+), 23 deletions(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 09fd8cde9ca9..dc691bd52a79 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -119,18 +119,21 @@ struct pca953x_reg_config {
 	int direction;
 	int output;
 	int input;
+	int invert;
 };
 
 static const struct pca953x_reg_config pca953x_regs = {
 	.direction = PCA953X_DIRECTION,
 	.output = PCA953X_OUTPUT,
 	.input = PCA953X_INPUT,
+	.invert = PCA953X_INVERT,
 };
 
 static const struct pca953x_reg_config pca957x_regs = {
 	.direction = PCA957X_CFG,
 	.output = PCA957X_OUT,
 	.input = PCA957X_IN,
+	.invert = PCA957X_INVRT,
 };
 
 struct pca953x_chip {
@@ -679,13 +682,11 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 }
 #endif
 
-static int device_pca953x_init(struct pca953x_chip *chip, u32 invert)
+static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
 {
 	int ret;
 	u8 val[MAX_BANK];
 
-	chip->regs = &pca953x_regs;
-
 	ret = pca953x_read_regs(chip, chip->regs->output, chip->reg_output);
 	if (ret)
 		goto out;
@@ -701,7 +702,7 @@ static int device_pca953x_init(struct pca953x_chip *chip, u32 invert)
 	else
 		memset(val, 0, NBANK(chip));
 
-	ret = pca953x_write_regs(chip, PCA953X_INVERT, val);
+	ret = pca953x_write_regs(chip, chip->regs->invert, val);
 out:
 	return ret;
 }
@@ -711,22 +712,7 @@ static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
 	int ret;
 	u8 val[MAX_BANK];
 
-	chip->regs = &pca957x_regs;
-
-	ret = pca953x_read_regs(chip, chip->regs->output, chip->reg_output);
-	if (ret)
-		goto out;
-	ret = pca953x_read_regs(chip, chip->regs->direction,
-				chip->reg_direction);
-	if (ret)
-		goto out;
-
-	/* set platform specific polarity inversion */
-	if (invert)
-		memset(val, 0xFF, NBANK(chip));
-	else
-		memset(val, 0, NBANK(chip));
-	ret = pca953x_write_regs(chip, PCA957X_INVRT, val);
+	ret = device_pca95xx_init(chip, invert);
 	if (ret)
 		goto out;
 
@@ -842,10 +828,13 @@ static int pca953x_probe(struct i2c_client *client,
 	 */
 	pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
 
-	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
-		ret = device_pca953x_init(chip, invert);
-	else
+	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
+		chip->regs = &pca953x_regs;
+		ret = device_pca95xx_init(chip, invert);
+	} else {
+		chip->regs = &pca957x_regs;
 		ret = device_pca957x_init(chip, invert);
+	}
 	if (ret)
 		goto err_exit;
 
-- 
2.18.0

  parent reply	other threads:[~2018-12-02 19:36 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-02 19:35 [PATCH 01/14] gpio: pca953x: Deduplicate the bank_size Marek Vasut
2018-12-02 19:35 ` [PATCH 02/14] gpio: pca953x: Fix AI overflow on PCAL6524 Marek Vasut
2018-12-03  9:37   ` Bartosz Golaszewski
2018-12-02 19:35 ` [PATCH 03/14] gpio: pca953x: Repair multi-byte IO address increment on PCA9575 Marek Vasut
2018-12-03 10:09   ` Geert Uytterhoeven
2018-12-02 19:35 ` [PATCH 04/14] gpio: pca953x: Unify pca95{3,7}x_write_regs_16() Marek Vasut
2018-12-02 19:35 ` [PATCH 05/14] gpio: pca953x: Unify pca953x_{read,write}_regs_{16,24}() Marek Vasut
2018-12-02 19:35 ` [PATCH 06/14] gpio: pca953x: Unify pca953x_{read,write}_regs_{8,mul}() Marek Vasut
2018-12-02 19:35 ` Marek Vasut [this message]
2018-12-02 19:35 ` [PATCH 08/14] gpio: pca953x: Zap ad-hoc I2C block write in multi GPIO set Marek Vasut
2018-12-02 19:35 ` [PATCH 09/14] gpio: pca953x: Extract the register address mangling to single function Marek Vasut
2018-12-02 19:35 ` [PATCH 10/14] gpio: pca953x: Perform basic regmap conversion Marek Vasut
2018-12-02 19:35 ` [PATCH 11/14] gpio: pca953x: Zap ad-hoc reg_direction cache Marek Vasut
2018-12-02 19:35 ` [PATCH 12/14] gpio: pca953x: Zap ad-hoc reg_output cache Marek Vasut
2018-12-02 19:35 ` [PATCH 13/14] gpio: pca953x: Zap single use of pca953x_read_single() Marek Vasut
2018-12-02 19:35 ` [PATCH 14/14] gpio: pca953x: Restore registers after suspend/resume cycle Marek Vasut
2018-12-03 17:55   ` Geert Uytterhoeven
2018-12-03 21:42     ` Marek Vasut
2018-12-18 12:57     ` Geert Uytterhoeven
2018-12-18 13:43       ` Geert Uytterhoeven
2018-12-05 14:39   ` Geert Uytterhoeven
2018-12-05 14:45     ` Marek Vasut
2018-12-03  9:36 ` [PATCH 01/14] gpio: pca953x: Deduplicate the bank_size Bartosz Golaszewski
2018-12-03 11:00   ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181202193553.29704-7-marek.vasut+renesas@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=marek.vasut+renesas@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.