All of lore.kernel.org
 help / color / mirror / Atom feed
From: Carlos Maiolino <cmaiolino@redhat.com>
To: linux-fsdevel@vger.kernel.org
Cc: hch@lst.de, adilger@dilger.ca, sandeen@redhat.com, david@fromorbit.com
Subject: [PATCH 01/10] fs: Enable bmap() function to properly return errors
Date: Wed,  5 Dec 2018 10:17:19 +0100	[thread overview]
Message-ID: <20181205091728.29903-2-cmaiolino@redhat.com> (raw)
In-Reply-To: <20181205091728.29903-1-cmaiolino@redhat.com>

By now, bmap() will either return the physical block number related to
the requested file offset or 0 in case of error or the requested offset
maps into a hole.
This patch makes the needed changes to enable bmap() to proper return
errors, using the return value as an error return, and now, a pointer
must be passed to bmap() to be filled with the mapped physical block.

It will change the behavior of bmap() on return:

- negative value in case of error
- zero on success or map fell into a hole

In case of a hole, the *block will be zero too

Since this is a prep patch, by now, the only error return is -EINVAL if
->bmap doesn't exist.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
---
 drivers/md/md-bitmap.c | 16 ++++++++++------
 fs/inode.c             | 30 +++++++++++++++++-------------
 fs/jbd2/journal.c      | 22 +++++++++++++++-------
 include/linux/fs.h     |  2 +-
 mm/page_io.c           | 11 +++++++----
 5 files changed, 50 insertions(+), 31 deletions(-)

diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c
index 1cd4f991792c..0668b2dd290e 100644
--- a/drivers/md/md-bitmap.c
+++ b/drivers/md/md-bitmap.c
@@ -363,7 +363,7 @@ static int read_page(struct file *file, unsigned long index,
 	int ret = 0;
 	struct inode *inode = file_inode(file);
 	struct buffer_head *bh;
-	sector_t block;
+	sector_t block, blk_cur;
 
 	pr_debug("read bitmap file (%dB @ %llu)\n", (int)PAGE_SIZE,
 		 (unsigned long long)index << PAGE_SHIFT);
@@ -374,17 +374,21 @@ static int read_page(struct file *file, unsigned long index,
 		goto out;
 	}
 	attach_page_buffers(page, bh);
-	block = index << (PAGE_SHIFT - inode->i_blkbits);
+	blk_cur = index << (PAGE_SHIFT - inode->i_blkbits);
 	while (bh) {
+		block = blk_cur;
+
 		if (count == 0)
 			bh->b_blocknr = 0;
 		else {
-			bh->b_blocknr = bmap(inode, block);
-			if (bh->b_blocknr == 0) {
-				/* Cannot use this file! */
+			ret = bmap(inode, &block);
+			if (ret || !block) {
 				ret = -EINVAL;
+				bh->b_blocknr = 0;
 				goto out;
 			}
+
+			bh->b_blocknr = block;
 			bh->b_bdev = inode->i_sb->s_bdev;
 			if (count < (1<<inode->i_blkbits))
 				count = 0;
@@ -398,7 +402,7 @@ static int read_page(struct file *file, unsigned long index,
 			set_buffer_mapped(bh);
 			submit_bh(REQ_OP_READ, 0, bh);
 		}
-		block++;
+		blk_cur++;
 		bh = bh->b_this_page;
 	}
 	page->index = index;
diff --git a/fs/inode.c b/fs/inode.c
index 0cd47fe0dbe5..db681d310465 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1580,21 +1580,25 @@ EXPORT_SYMBOL(iput);
 
 /**
  *	bmap	- find a block number in a file
- *	@inode: inode of file
- *	@block: block to find
- *
- *	Returns the block number on the device holding the inode that
- *	is the disk block number for the block of the file requested.
- *	That is, asked for block 4 of inode 1 the function will return the
- *	disk block relative to the disk start that holds that block of the
- *	file.
+ *	@inode:  inode owning the block number being requested
+ *	@*block: pointer containing the block to find
+ *
+ *	Replaces the value in *block with the block number on the device holding
+ *	corresponding to the requested block number in the file.
+ *	That is, asked for block 4 of inode 1 the function will replace the
+ *	4 in *block, with disk block relative to the disk start that holds that
+ *	block of the file.
+ *
+ *	Returns -EINVAL in case of error, 0 otherwise. If mapping falls into a
+ *	hole, returns 0 and *block is also set to 0.
  */
-sector_t bmap(struct inode *inode, sector_t block)
+int bmap(struct inode *inode, sector_t *block)
 {
-	sector_t res = 0;
-	if (inode->i_mapping->a_ops->bmap)
-		res = inode->i_mapping->a_ops->bmap(inode->i_mapping, block);
-	return res;
+	if (!inode->i_mapping->a_ops->bmap)
+		return -EINVAL;
+
+	*block = inode->i_mapping->a_ops->bmap(inode->i_mapping, *block);
+	return 0;
 }
 EXPORT_SYMBOL(bmap);
 
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 8ef6b6daaa7a..7acaf6f55404 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -814,18 +814,23 @@ int jbd2_journal_bmap(journal_t *journal, unsigned long blocknr,
 {
 	int err = 0;
 	unsigned long long ret;
+	sector_t block = 0;
 
 	if (journal->j_inode) {
-		ret = bmap(journal->j_inode, blocknr);
-		if (ret)
-			*retp = ret;
-		else {
+		block = blocknr;
+		ret = bmap(journal->j_inode, &block);
+
+		if (ret || !block) {
 			printk(KERN_ALERT "%s: journal block not found "
 					"at offset %lu on %s\n",
 			       __func__, blocknr, journal->j_devname);
 			err = -EIO;
 			__journal_abort_soft(journal, err);
+
+		} else {
+			*retp = block;
 		}
+
 	} else {
 		*retp = blocknr; /* +journal->j_blk_offset */
 	}
@@ -1251,11 +1256,14 @@ journal_t *jbd2_journal_init_dev(struct block_device *bdev,
 journal_t *jbd2_journal_init_inode(struct inode *inode)
 {
 	journal_t *journal;
+	sector_t blocknr;
 	char *p;
-	unsigned long long blocknr;
+	int err = 0;
+
+	blocknr = 0;
+	err = bmap(inode, &blocknr);
 
-	blocknr = bmap(inode, 0);
-	if (!blocknr) {
+	if (err || !blocknr) {
 		pr_err("%s: Cannot locate journal superblock\n",
 			__func__);
 		return NULL;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 5f7f67bd33a5..71dac6e00e27 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2811,7 +2811,7 @@ static inline ssize_t generic_write_sync(struct kiocb *iocb, ssize_t count)
 extern void emergency_sync(void);
 extern void emergency_remount(void);
 #ifdef CONFIG_BLOCK
-extern sector_t bmap(struct inode *, sector_t);
+extern int bmap(struct inode *, sector_t *);
 #endif
 extern int notify_change(struct dentry *, struct iattr *, struct inode **);
 extern int inode_permission(struct inode *, int);
diff --git a/mm/page_io.c b/mm/page_io.c
index 57572ff46016..b52e3e2ec13c 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -177,8 +177,9 @@ int generic_swapfile_activate(struct swap_info_struct *sis,
 
 		cond_resched();
 
-		first_block = bmap(inode, probe_block);
-		if (first_block == 0)
+		first_block = probe_block;
+		ret = bmap(inode, &first_block);
+		if (ret || !first_block)
 			goto bad_bmap;
 
 		/*
@@ -193,9 +194,11 @@ int generic_swapfile_activate(struct swap_info_struct *sis,
 					block_in_page++) {
 			sector_t block;
 
-			block = bmap(inode, probe_block + block_in_page);
-			if (block == 0)
+			block = probe_block + block_in_page;
+			ret = bmap(inode, &block);
+			if (ret || !block)
 				goto bad_bmap;
+
 			if (block != first_block + block_in_page) {
 				/* Discontiguity */
 				probe_block++;
-- 
2.17.2

  reply	other threads:[~2018-12-05  9:17 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-05  9:17 [PATCH 00/10 V2] New ->fiemap infrastructure and ->bmap removal Carlos Maiolino
2018-12-05  9:17 ` Carlos Maiolino [this message]
2018-12-05  9:17 ` [PATCH 02/10] cachefiles: drop direct usage of ->bmap method Carlos Maiolino
2018-12-05  9:17 ` [PATCH 03/10] ecryptfs: drop direct calls to ->bmap Carlos Maiolino
2018-12-05  9:17 ` [PATCH 04/10 V2] fibmap: Use bmap instead of ->bmap method in ioctl_fibmap Carlos Maiolino
2019-01-14 16:49   ` Christoph Hellwig
2019-02-04 11:34     ` Carlos Maiolino
2018-12-05  9:17 ` [PATCH 05/10] fs: Move start and length fiemap fields into fiemap_extent_info Carlos Maiolino
2019-01-14 16:50   ` Christoph Hellwig
2018-12-05  9:17 ` [PATCH 06/10] iomap: Remove length and start fields from iomap_fiemap Carlos Maiolino
2019-01-14 16:51   ` Christoph Hellwig
2018-12-05  9:17 ` [PATCH 07/10] fs: Use a void pointer to store fiemap_extent Carlos Maiolino
2019-01-14 16:53   ` Christoph Hellwig
2018-12-05  9:17 ` [PATCH 08/10 V2] fiemap: Use a callback to fill fiemap extents Carlos Maiolino
2019-01-14 16:53   ` Christoph Hellwig
2018-12-05  9:17 ` [PATCH 09/10 V2] Use FIEMAP for FIBMAP calls Carlos Maiolino
2018-12-05 17:36   ` Darrick J. Wong
2018-12-07  9:09     ` Carlos Maiolino
2018-12-07 20:14       ` Andreas Dilger
2019-02-04 15:11     ` Carlos Maiolino
2019-02-04 18:27       ` Darrick J. Wong
2019-02-06 13:37         ` Carlos Maiolino
2019-02-06 20:44           ` Darrick J. Wong
2019-02-06 21:13             ` Andreas Dilger
2019-02-07  9:52               ` Carlos Maiolino
2019-02-08  8:43                 ` Christoph Hellwig
2019-02-11 12:57                   ` Christoph Hellwig
2019-02-11 16:21                     ` Carlos Maiolino
2019-02-11 16:48                       ` Christoph Hellwig
2019-02-07 11:59             ` Carlos Maiolino
2019-02-07 17:02               ` Darrick J. Wong
2019-02-07 21:25                 ` Andreas Dilger
2019-02-08  8:46                   ` Christoph Hellwig
2019-02-08 10:36                     ` Carlos Maiolino
2019-02-08 21:03                       ` Andreas Dilger
2019-02-08  9:08                   ` Carlos Maiolino
2019-02-08  9:03                 ` Carlos Maiolino
2019-02-07 12:36             ` Carlos Maiolino
2019-02-07 18:16               ` Darrick J. Wong
2019-02-08  8:58                 ` Carlos Maiolino
2019-02-06 21:04           ` Andreas Dilger
2019-01-14 16:56   ` Christoph Hellwig
2019-02-05  9:56     ` Carlos Maiolino
2019-02-05 18:25       ` Christoph Hellwig
2019-02-06  9:50         ` Carlos Maiolino
2018-12-05  9:17 ` [PATCH 10/10] xfs: Get rid of ->bmap Carlos Maiolino
2018-12-05 17:37   ` Darrick J. Wong
2018-12-06 13:06     ` Carlos Maiolino
2018-12-06 18:56 ` [PATCH 00/10 V2] New ->fiemap infrastructure and ->bmap removal Andreas Grünbacher
2018-12-07  9:34   ` Carlos Maiolino
2019-01-14 16:50     ` Christoph Hellwig
2019-01-14 17:56       ` Andreas Grünbacher
2019-01-14 17:58         ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181205091728.29903-2-cmaiolino@redhat.com \
    --to=cmaiolino@redhat.com \
    --cc=adilger@dilger.ca \
    --cc=david@fromorbit.com \
    --cc=hch@lst.de \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=sandeen@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.