From: Lucas De Marchi <lucas.demarchi@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH v3 1/3] drm/i915: Rename IS_GEN to IS_GEN_RANGE
Date: Wed, 5 Dec 2018 22:11:42 -0800 [thread overview]
Message-ID: <20181206061144.16235-2-lucas.demarchi@intel.com> (raw)
In-Reply-To: <20181206061144.16235-1-lucas.demarchi@intel.com>
RANGE makes it longer, but clearer. We are also going to add a macro to
check an individual gen, so add the _RANGE prefix here.
Diff generated with:
sed 's/IS_GEN(/IS_GEN_RANGE(/g' drivers/gpu/drm/i915/{*/,}*.{c,h} -i
v2: use IS_GEN rather than GT_GEN
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 2 +-
drivers/gpu/drm/i915/i915_perf.c | 4 ++--
drivers/gpu/drm/i915/intel_bios.c | 2 +-
drivers/gpu/drm/i915/intel_engine_cs.c | 2 +-
drivers/gpu/drm/i915/intel_fbc.c | 2 +-
drivers/gpu/drm/i915/intel_hangcheck.c | 2 +-
drivers/gpu/drm/i915/intel_ringbuffer.c | 8 ++++----
drivers/gpu/drm/i915/intel_uncore.c | 12 ++++++------
8 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0689e67c966e..affcb028ff8d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2213,7 +2213,7 @@ intel_info(const struct drm_i915_private *dev_priv)
GENMASK((e) - 1, (s) - 1))
/* Returns true if Gen is in inclusive range [Start, End] */
-#define IS_GEN(dev_priv, s, e) \
+#define IS_GEN_RANGE(dev_priv, s, e) \
(!!((dev_priv)->info.gen_mask & INTEL_GEN_MASK((s), (e))))
/*
diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 4529edfdcfc8..ad0095be435d 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -1796,7 +1796,7 @@ static int gen8_enable_metric_set(struct i915_perf_stream *stream)
* be read back from automatically triggered reports, as part of the
* RPT_ID field.
*/
- if (IS_GEN(dev_priv, 9, 11)) {
+ if (IS_GEN_RANGE(dev_priv, 9, 11)) {
I915_WRITE(GEN8_OA_DEBUG,
_MASKED_BIT_ENABLE(GEN9_OA_DEBUG_DISABLE_CLK_RATIO_REPORTS |
GEN9_OA_DEBUG_INCLUDE_CLK_RATIO));
@@ -3442,7 +3442,7 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<16);
}
- } else if (IS_GEN(dev_priv, 10, 11)) {
+ } else if (IS_GEN_RANGE(dev_priv, 10, 11)) {
dev_priv->perf.oa.ops.is_valid_b_counter_reg =
gen7_is_valid_b_counter_addr;
dev_priv->perf.oa.ops.is_valid_mux_reg =
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 6d3e0260d49c..7b7e7abfa259 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -453,7 +453,7 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv, u8 bdb_version)
* Only parse SDVO mappings on gens that could have SDVO. This isn't
* accurate and doesn't have to be, as long as it's not too strict.
*/
- if (!IS_GEN(dev_priv, 3, 7)) {
+ if (!IS_GEN_RANGE(dev_priv, 3, 7)) {
DRM_DEBUG_KMS("Skipping SDVO device mapping\n");
return;
}
diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c
index af2873403009..fe5e87b6e1af 100644
--- a/drivers/gpu/drm/i915/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/intel_engine_cs.c
@@ -1248,7 +1248,7 @@ static void intel_engine_print_registers(const struct intel_engine_cs *engine,
&engine->execlists;
u64 addr;
- if (engine->id == RCS && IS_GEN(dev_priv, 4, 7))
+ if (engine->id == RCS && IS_GEN_RANGE(dev_priv, 4, 7))
drm_printf(m, "\tCCID: 0x%08x\n", I915_READ(CCID));
drm_printf(m, "\tRING_START: 0x%08x\n",
I915_READ(RING_START(engine->mmio_base)));
diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c
index 78dbacdeaece..b57e31fc0f1e 100644
--- a/drivers/gpu/drm/i915/intel_fbc.c
+++ b/drivers/gpu/drm/i915/intel_fbc.c
@@ -787,7 +787,7 @@ static bool intel_fbc_can_activate(struct intel_crtc *crtc)
* having a Y offset that isn't divisible by 4 causes FIFO underrun
* and screen flicker.
*/
- if (IS_GEN(dev_priv, 9, 10) &&
+ if (IS_GEN_RANGE(dev_priv, 9, 10) &&
(fbc->state_cache.plane.adjusted_y & 3)) {
fbc->no_fbc_reason = "plane Y offset is misaligned";
return false;
diff --git a/drivers/gpu/drm/i915/intel_hangcheck.c b/drivers/gpu/drm/i915/intel_hangcheck.c
index e26d05a46451..41921a843d42 100644
--- a/drivers/gpu/drm/i915/intel_hangcheck.c
+++ b/drivers/gpu/drm/i915/intel_hangcheck.c
@@ -252,7 +252,7 @@ engine_stuck(struct intel_engine_cs *engine, u64 acthd)
return ENGINE_WAIT_KICK;
}
- if (IS_GEN(dev_priv, 6, 7) && tmp & RING_WAIT_SEMAPHORE) {
+ if (IS_GEN_RANGE(dev_priv, 6, 7) && tmp & RING_WAIT_SEMAPHORE) {
switch (semaphore_passed(engine)) {
default:
return ENGINE_DEAD;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index c5eb26a7ee79..a205cc9e60cc 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -436,7 +436,7 @@ static void intel_ring_setup_status_page(struct intel_engine_cs *engine)
POSTING_READ(mmio);
/* Flush the TLB for this page */
- if (IS_GEN(dev_priv, 6, 7)) {
+ if (IS_GEN_RANGE(dev_priv, 6, 7)) {
i915_reg_t reg = RING_INSTPM(engine->mmio_base);
/* ring should be idle before issuing a sync flush*/
@@ -670,7 +670,7 @@ static int init_render_ring(struct intel_engine_cs *engine)
return ret;
/* WaTimedSingleVertexDispatch:cl,bw,ctg,elk,ilk,snb */
- if (IS_GEN(dev_priv, 4, 6))
+ if (IS_GEN_RANGE(dev_priv, 4, 6))
I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(VS_TIMER_DISPATCH));
/* We need to disable the AsyncFlip performance optimisations in order
@@ -679,7 +679,7 @@ static int init_render_ring(struct intel_engine_cs *engine)
*
* WaDisableAsyncFlipPerfMode:snb,ivb,hsw,vlv
*/
- if (IS_GEN(dev_priv, 6, 7))
+ if (IS_GEN_RANGE(dev_priv, 6, 7))
I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE));
/* Required for the hardware to program scanline values for waiting */
@@ -704,7 +704,7 @@ static int init_render_ring(struct intel_engine_cs *engine)
_MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB));
}
- if (IS_GEN(dev_priv, 6, 7))
+ if (IS_GEN_RANGE(dev_priv, 6, 7))
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_FORCE_ORDERING));
if (INTEL_GEN(dev_priv) >= 6)
diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index 9289515108c3..631b4165fe00 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -1567,13 +1567,13 @@ void intel_uncore_init(struct drm_i915_private *dev_priv)
dev_priv->uncore.pmic_bus_access_nb.notifier_call =
i915_pmic_bus_access_notifier;
- if (IS_GEN(dev_priv, 2, 4) || intel_vgpu_active(dev_priv)) {
+ if (IS_GEN_RANGE(dev_priv, 2, 4) || intel_vgpu_active(dev_priv)) {
ASSIGN_WRITE_MMIO_VFUNCS(dev_priv, gen2);
ASSIGN_READ_MMIO_VFUNCS(dev_priv, gen2);
} else if (IS_GEN5(dev_priv)) {
ASSIGN_WRITE_MMIO_VFUNCS(dev_priv, gen5);
ASSIGN_READ_MMIO_VFUNCS(dev_priv, gen5);
- } else if (IS_GEN(dev_priv, 6, 7)) {
+ } else if (IS_GEN_RANGE(dev_priv, 6, 7)) {
ASSIGN_WRITE_MMIO_VFUNCS(dev_priv, gen6);
if (IS_VALLEYVIEW(dev_priv)) {
@@ -1592,7 +1592,7 @@ void intel_uncore_init(struct drm_i915_private *dev_priv)
ASSIGN_WRITE_MMIO_VFUNCS(dev_priv, gen8);
ASSIGN_READ_MMIO_VFUNCS(dev_priv, gen6);
}
- } else if (IS_GEN(dev_priv, 9, 10)) {
+ } else if (IS_GEN_RANGE(dev_priv, 9, 10)) {
ASSIGN_FW_DOMAINS_TABLE(__gen9_fw_ranges);
ASSIGN_WRITE_MMIO_VFUNCS(dev_priv, fwtable);
ASSIGN_READ_MMIO_VFUNCS(dev_priv, fwtable);
@@ -2321,7 +2321,7 @@ intel_uncore_forcewake_for_read(struct drm_i915_private *dev_priv,
} else if (INTEL_GEN(dev_priv) >= 6) {
fw_domains = __gen6_reg_read_fw_domains(offset);
} else {
- WARN_ON(!IS_GEN(dev_priv, 2, 5));
+ WARN_ON(!IS_GEN_RANGE(dev_priv, 2, 5));
fw_domains = 0;
}
@@ -2343,10 +2343,10 @@ intel_uncore_forcewake_for_write(struct drm_i915_private *dev_priv,
fw_domains = __fwtable_reg_write_fw_domains(offset);
} else if (IS_GEN8(dev_priv)) {
fw_domains = __gen8_reg_write_fw_domains(offset);
- } else if (IS_GEN(dev_priv, 6, 7)) {
+ } else if (IS_GEN_RANGE(dev_priv, 6, 7)) {
fw_domains = FORCEWAKE_RENDER;
} else {
- WARN_ON(!IS_GEN(dev_priv, 2, 5));
+ WARN_ON(!IS_GEN_RANGE(dev_priv, 2, 5));
fw_domains = 0;
}
--
2.19.1.1.g56c4683e68
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-12-06 6:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-06 6:11 [PATCH v3 0/3] Make GEN macros more similar Lucas De Marchi
2018-12-06 6:11 ` Lucas De Marchi [this message]
2018-12-06 12:28 ` [PATCH v3 1/3] drm/i915: Rename IS_GEN to IS_GEN_RANGE Tvrtko Ursulin
2018-12-11 14:24 ` Jani Nikula
2018-12-06 6:11 ` [PATCH v3 2/3] drm/i915: replace IS_GEN<N> with IS_GEN(..., N) Lucas De Marchi
2018-12-06 12:37 ` Tvrtko Ursulin
2018-12-07 1:17 ` Lucas De Marchi
2018-12-07 11:30 ` Tvrtko Ursulin
2018-12-07 11:42 ` Tvrtko Ursulin
2018-12-07 20:57 ` Lucas De Marchi
2018-12-10 8:27 ` Tvrtko Ursulin
2018-12-11 14:34 ` Jani Nikula
2018-12-06 6:11 ` [PATCH v3 3/3] drm/i915: merge gen checks to use range Lucas De Marchi
2018-12-11 14:35 ` Jani Nikula
2018-12-13 1:01 ` Rodrigo Vivi
2018-12-06 6:32 ` ✗ Fi.CI.CHECKPATCH: warning for Make GEN macros more similar (rev3) Patchwork
2018-12-06 6:34 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-12-06 6:49 ` ✓ Fi.CI.BAT: success " Patchwork
2018-12-06 20:20 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181206061144.16235-2-lucas.demarchi@intel.com \
--to=lucas.demarchi@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.