All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Ranostay <matt.ranostay@konsulko.com>
To: linux-media@vger.kernel.org
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Subject: [PATCH v4 2/2] media: video-i2c: add Melexis MLX90640 thermal camera
Date: Tue, 11 Dec 2018 07:17:01 -0800	[thread overview]
Message-ID: <20181211151701.10002-3-matt.ranostay@konsulko.com> (raw)
In-Reply-To: <20181211151701.10002-1-matt.ranostay@konsulko.com>

Add initial support for MLX90640 thermal cameras which output an 32x24
greyscale pixel image along with 2 rows of coefficent data.

Because of this the data outputed is really 32x26 and needs the two rows
removed after using the coefficent information to generate processed
images in userspace.

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
---
 drivers/media/i2c/Kconfig     |   1 +
 drivers/media/i2c/video-i2c.c | 110 +++++++++++++++++++++++++++++++++-
 2 files changed, 110 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 4c936e129500..a8819686e078 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1100,6 +1100,7 @@ config VIDEO_I2C
 	  Enable the I2C transport video support which supports the
 	  following:
 	   * Panasonic AMG88xx Grid-Eye Sensors
+	   * Melexis MLX90640 Thermal Cameras
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called video-i2c
diff --git a/drivers/media/i2c/video-i2c.c b/drivers/media/i2c/video-i2c.c
index 01dcf179f203..abd3152df7d0 100644
--- a/drivers/media/i2c/video-i2c.c
+++ b/drivers/media/i2c/video-i2c.c
@@ -6,6 +6,7 @@
  *
  * Supported:
  * - Panasonic AMG88xx Grid-Eye Sensors
+ * - Melexis MLX90640 Thermal Cameras
  */
 
 #include <linux/delay.h>
@@ -18,6 +19,7 @@
 #include <linux/mutex.h>
 #include <linux/of_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/nvmem-provider.h>
 #include <linux/regmap.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -66,12 +68,26 @@ static const struct v4l2_frmsize_discrete amg88xx_size = {
 	.height = 8,
 };
 
+static const struct v4l2_fmtdesc mlx90640_format = {
+	.pixelformat = V4L2_PIX_FMT_Y16_BE,
+};
+
+static const struct v4l2_frmsize_discrete mlx90640_size = {
+	.width = 32,
+	.height = 26, /* 24 lines of pixel data + 2 lines of processing data */
+};
+
 static const struct regmap_config amg88xx_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = 0xff
 };
 
+static const struct regmap_config mlx90640_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 16,
+};
+
 struct video_i2c_chip {
 	/* video dimensions */
 	const struct v4l2_fmtdesc *format;
@@ -88,6 +104,7 @@ struct video_i2c_chip {
 	unsigned int bpp;
 
 	const struct regmap_config *regmap_config;
+	struct nvmem_config *nvmem_config;
 
 	/* setup function */
 	int (*setup)(struct video_i2c_data *data);
@@ -102,6 +119,22 @@ struct video_i2c_chip {
 	int (*hwmon_init)(struct video_i2c_data *data);
 };
 
+static int mlx90640_nvram_read(void *priv, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	struct video_i2c_data *data = priv;
+
+	return regmap_bulk_read(data->regmap, 0x2400 + offset, val, bytes);
+}
+
+static struct nvmem_config mlx90640_nvram_config = {
+	.name = "mlx90640_nvram",
+	.word_size = 2,
+	.stride = 1,
+	.size = 1664,
+	.reg_read = mlx90640_nvram_read,
+};
+
 /* Power control register */
 #define AMG88XX_REG_PCTL	0x00
 #define AMG88XX_PCTL_NORMAL		0x00
@@ -122,12 +155,23 @@ struct video_i2c_chip {
 /* Temperature register */
 #define AMG88XX_REG_T01L	0x80
 
+/* Control register */
+#define MLX90640_REG_CTL1		0x800d
+#define MLX90640_REG_CTL1_MASK		0x0380
+#define MLX90640_REG_CTL1_MASK_SHIFT	7
+
 static int amg88xx_xfer(struct video_i2c_data *data, char *buf)
 {
 	return regmap_bulk_read(data->regmap, AMG88XX_REG_T01L, buf,
 				data->chip->buffer_size);
 }
 
+static int mlx90640_xfer(struct video_i2c_data *data, char *buf)
+{
+	return regmap_bulk_read(data->regmap, 0x400, buf,
+				data->chip->buffer_size);
+}
+
 static int amg88xx_setup(struct video_i2c_data *data)
 {
 	unsigned int mask = AMG88XX_FPSC_1FPS;
@@ -141,6 +185,27 @@ static int amg88xx_setup(struct video_i2c_data *data)
 	return regmap_update_bits(data->regmap, AMG88XX_REG_FPSC, mask, val);
 }
 
+static int mlx90640_setup(struct video_i2c_data *data)
+{
+	unsigned int n, idx;
+
+	for (n = 0; n < data->chip->num_frame_intervals - 1; n++) {
+		if (data->frame_interval.numerator
+				!= data->chip->frame_intervals[n].numerator)
+			continue;
+
+		if (data->frame_interval.denominator
+				== data->chip->frame_intervals[n].denominator)
+			break;
+	}
+
+	idx = data->chip->num_frame_intervals - n - 1;
+
+	return regmap_update_bits(data->regmap, MLX90640_REG_CTL1,
+				  MLX90640_REG_CTL1_MASK,
+				  idx << MLX90640_REG_CTL1_MASK_SHIFT);
+}
+
 static int amg88xx_set_power_on(struct video_i2c_data *data)
 {
 	int ret;
@@ -274,13 +339,27 @@ static int amg88xx_hwmon_init(struct video_i2c_data *data)
 #define	amg88xx_hwmon_init	NULL
 #endif
 
-#define AMG88XX		0
+enum {
+	AMG88XX,
+	MLX90640,
+};
 
 static const struct v4l2_fract amg88xx_frame_intervals[] = {
 	{ 1, 10 },
 	{ 1, 1 },
 };
 
+static const struct v4l2_fract mlx90640_frame_intervals[] = {
+	{ 1, 64 },
+	{ 1, 32 },
+	{ 1, 16 },
+	{ 1, 8 },
+	{ 1, 4 },
+	{ 1, 2 },
+	{ 1, 1 },
+	{ 2, 1 },
+};
+
 static const struct video_i2c_chip video_i2c_chip[] = {
 	[AMG88XX] = {
 		.size		= &amg88xx_size,
@@ -295,6 +374,18 @@ static const struct video_i2c_chip video_i2c_chip[] = {
 		.set_power	= amg88xx_set_power,
 		.hwmon_init	= amg88xx_hwmon_init,
 	},
+	[MLX90640] = {
+		.size		= &mlx90640_size,
+		.format		= &mlx90640_format,
+		.frame_intervals	= mlx90640_frame_intervals,
+		.num_frame_intervals	= ARRAY_SIZE(mlx90640_frame_intervals),
+		.buffer_size	= 1664,
+		.bpp		= 16,
+		.regmap_config	= &mlx90640_regmap_config,
+		.nvmem_config	= &mlx90640_nvram_config,
+		.setup		= mlx90640_setup,
+		.xfer		= mlx90640_xfer,
+	},
 };
 
 static const struct v4l2_file_operations video_i2c_fops = {
@@ -756,6 +847,21 @@ static int video_i2c_probe(struct i2c_client *client,
 		}
 	}
 
+	if (data->chip->nvmem_config) {
+		struct nvmem_config *config = data->chip->nvmem_config;
+		struct nvmem_device *device;
+
+		config->priv = data;
+		config->dev = &client->dev;
+
+		device = devm_nvmem_register(&client->dev, config);
+
+		if (IS_ERR(device)) {
+			dev_warn(&client->dev,
+				 "failed to register nvmem device\n");
+		}
+	}
+
 	ret = video_register_device(&data->vdev, VFL_TYPE_GRABBER, -1);
 	if (ret < 0)
 		goto error_pm_disable;
@@ -835,12 +941,14 @@ static const struct dev_pm_ops video_i2c_pm_ops = {
 
 static const struct i2c_device_id video_i2c_id_table[] = {
 	{ "amg88xx", AMG88XX },
+	{ "mlx90640", MLX90640 },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, video_i2c_id_table);
 
 static const struct of_device_id video_i2c_of_match[] = {
 	{ .compatible = "panasonic,amg88xx", .data = &video_i2c_chip[AMG88XX] },
+	{ .compatible = "melexis,mlx90640", .data = &video_i2c_chip[MLX90640] },
 	{}
 };
 MODULE_DEVICE_TABLE(of, video_i2c_of_match);
-- 
2.17.1


      parent reply	other threads:[~2018-12-11 15:17 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-11 15:16 [PATCH v4 0/2] media: video-i2c: add Melexis MLX90640 thermal camera support Matt Ranostay
2018-12-11 15:17 ` [PATCH v4 1/2] media: dt-bindings: media: video-i2c: add melexis mlx90640 documentation Matt Ranostay
2018-12-17 21:44   ` Rob Herring
2018-12-17 21:44     ` Rob Herring
2019-01-18 10:45   ` Hans Verkuil
2018-12-11 15:17 ` Matt Ranostay [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181211151701.10002-3-matt.ranostay@konsulko.com \
    --to=matt.ranostay@konsulko.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.