All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 04/41] dmg: exchanging hardcoded dmg UDIF block types to enum.
Date: Wed, 12 Dec 2018 14:26:58 +0100	[thread overview]
Message-ID: <20181212132735.16080-5-kwolf@redhat.com> (raw)
In-Reply-To: <20181212132735.16080-1-kwolf@redhat.com>

From: Julio Faracco <jcfaracco@gmail.com>

This change is better to understand what kind of block type is being
handled by the code. Using a syntax similar to the DMG documentation is
easier than tracking all hex values assigned to a block type.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/dmg.c | 43 ++++++++++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 15 deletions(-)

diff --git a/block/dmg.c b/block/dmg.c
index 86bb2344ea..50e91aef6d 100644
--- a/block/dmg.c
+++ b/block/dmg.c
@@ -44,6 +44,19 @@ enum {
     DMG_SECTORCOUNTS_MAX = DMG_LENGTHS_MAX / 512,
 };
 
+enum {
+    /* DMG Block Type */
+    UDZE = 0, /* Zeroes */
+    UDRW,     /* RAW type */
+    UDIG,     /* Ignore */
+    UDCO = 0x80000004,
+    UDZO,
+    UDBZ,
+    ULFO,
+    UDCM = 0x7ffffffe, /* Comments */
+    UDLE               /* Last Entry */
+};
+
 static int dmg_probe(const uint8_t *buf, int buf_size, const char *filename)
 {
     int len;
@@ -108,16 +121,16 @@ static void update_max_chunk_size(BDRVDMGState *s, uint32_t chunk,
     uint32_t uncompressed_sectors = 0;
 
     switch (s->types[chunk]) {
-    case 0x80000005: /* zlib compressed */
-    case 0x80000006: /* bzip2 compressed */
-    case 0x80000007: /* lzfse compressed */
+    case UDZO: /* zlib compressed */
+    case UDBZ: /* bzip2 compressed */
+    case ULFO: /* lzfse compressed */
         compressed_size = s->lengths[chunk];
         uncompressed_sectors = s->sectorcounts[chunk];
         break;
-    case 1: /* copy */
+    case UDRW: /* copy */
         uncompressed_sectors = DIV_ROUND_UP(s->lengths[chunk], 512);
         break;
-    case 2: /* zero */
+    case UDIG: /* zero */
         /* as the all-zeroes block may be large, it is treated specially: the
          * sector is not copied from a large buffer, a simple memset is used
          * instead. Therefore uncompressed_sectors does not need to be set. */
@@ -186,13 +199,13 @@ typedef struct DmgHeaderState {
 static bool dmg_is_known_block_type(uint32_t entry_type)
 {
     switch (entry_type) {
-    case 0x00000001:    /* uncompressed */
-    case 0x00000002:    /* zeroes */
-    case 0x80000005:    /* zlib */
+    case UDRW:    /* uncompressed */
+    case UDIG:    /* zeroes */
+    case UDZO:    /* zlib */
         return true;
-    case 0x80000006:    /* bzip2 */
+    case UDBZ:    /* bzip2 */
         return !!dmg_uncompress_bz2;
-    case 0x80000007:    /* lzfse */
+    case ULFO:    /* lzfse */
         return !!dmg_uncompress_lzfse;
     default:
         return false;
@@ -586,7 +599,7 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
 
         s->current_chunk = s->n_chunks;
         switch (s->types[chunk]) { /* block entry type */
-        case 0x80000005: { /* zlib compressed */
+        case UDZO: { /* zlib compressed */
             /* we need to buffer, because only the chunk as whole can be
              * inflated. */
             ret = bdrv_pread(bs->file, s->offsets[chunk],
@@ -609,7 +622,7 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
                 return -1;
             }
             break; }
-        case 0x80000006: /* bzip2 compressed */
+        case UDBZ: /* bzip2 compressed */
             if (!dmg_uncompress_bz2) {
                 break;
             }
@@ -630,7 +643,7 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
                 return ret;
             }
             break;
-        case 0x80000007:
+        case ULFO:
             if (!dmg_uncompress_lzfse) {
                 break;
             }
@@ -651,14 +664,14 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
                 return ret;
             }
             break;
-        case 1: /* copy */
+        case UDRW: /* copy */
             ret = bdrv_pread(bs->file, s->offsets[chunk],
                              s->uncompressed_chunk, s->lengths[chunk]);
             if (ret != s->lengths[chunk]) {
                 return -1;
             }
             break;
-        case 2: /* zero */
+        case UDIG: /* zero */
             /* see dmg_read, it is treated specially. No buffer needs to be
              * pre-filled, the zeroes can be set directly. */
             break;
-- 
2.19.2

  parent reply	other threads:[~2018-12-12 13:28 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-12 13:26 [Qemu-devel] [PULL 00/41] Block layer patches Kevin Wolf
2018-12-12 13:26 ` [Qemu-devel] [PULL 01/41] block: adding lzfse decompressing support as a module Kevin Wolf
2018-12-12 13:26 ` [Qemu-devel] [PULL 02/41] configure: adding support to lzfse library Kevin Wolf
2018-12-12 13:26 ` [Qemu-devel] [PULL 03/41] dmg: including dmg-lzfse module inside dmg block driver Kevin Wolf
2018-12-12 13:26 ` Kevin Wolf [this message]
2018-12-12 13:26 ` [Qemu-devel] [PULL 05/41] block/replication: drop extra synchronization Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 06/41] block/backup: drop unused synchronization interface Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 07/41] qcow2: use Z_OK instead of 0 for deflateInit2 return code check Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 08/41] qcow2: make more generic interface for qcow2_compress Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 09/41] qcow2: move decompression from qcow2-cluster.c to qcow2.c Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 10/41] qcow2: refactor decompress_buffer Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 11/41] qcow2: use byte-based read in qcow2_decompress_cluster Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 12/41] qcow2: aio support for compressed cluster read Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 13/41] qcow2: do decompression in threads Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 14/41] file-posix: Reorganise RawPosixAIOData Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 15/41] file-posix: Factor out raw_thread_pool_submit() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 16/41] file-posix: Avoid aio_worker() for QEMU_AIO_TRUNCATE Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 17/41] file-posix: Avoid aio_worker() for QEMU_AIO_COPY_RANGE Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 18/41] file-posix: Avoid aio_worker() for QEMU_AIO_WRITE_ZEROES Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 19/41] file-posix: Avoid aio_worker() for QEMU_AIO_DISCARD Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 20/41] file-posix: Avoid aio_worker() for QEMU_AIO_FLUSH Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 21/41] file-posix: Move read/write operation logic out of aio_worker() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 22/41] file-posix: Avoid aio_worker() for QEMU_AIO_READ/WRITE Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 23/41] file-posix: Remove paio_submit_co() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 24/41] file-posix: Switch to .bdrv_co_ioctl Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 25/41] file-posix: Avoid aio_worker() for QEMU_AIO_IOCTL Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 26/41] block: Add bdrv_reopen_set_read_only() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 27/41] block: Use bdrv_reopen_set_read_only() in bdrv_backing_update_filename() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 28/41] block: Use bdrv_reopen_set_read_only() in commit_start/complete() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 29/41] block: Use bdrv_reopen_set_read_only() in bdrv_commit() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 30/41] block: Use bdrv_reopen_set_read_only() in stream_start/complete() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 31/41] block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 32/41] block: Use bdrv_reopen_set_read_only() in external_snapshot_commit() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 33/41] block: Use bdrv_reopen_set_read_only() in the mirror driver Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 34/41] block: Drop bdrv_reopen() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 35/41] qemu-io: Put flag changes in the options QDict in reopen_f() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 36/41] block: Clean up reopen_backing_file() in block/replication.c Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 37/41] block: Remove flags parameter from bdrv_reopen_queue() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 38/41] block: Stop passing flags to bdrv_reopen_queue_child() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 39/41] block: Remove assertions from update_flags_from_options() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 40/41] block: Assert that flags are up-to-date in bdrv_reopen_prepare() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 41/41] iotests: make 235 work on s390 (and others) Kevin Wolf
2018-12-14 10:19 ` [Qemu-devel] [PULL 00/41] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181212132735.16080-5-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.