From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vignesh R Date: Wed, 12 Dec 2018 23:02:15 +0530 Subject: [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM In-Reply-To: <20181212173228.12281-1-vigneshr@ti.com> References: <20181212173228.12281-1-vigneshr@ti.com> Message-ID: <20181212173228.12281-4-vigneshr@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add non DM version of SPI_MEM to support easy migration to new SPI NOR framework. This can be removed once DM_SPI conversion is complete. Signed-off-by: Vignesh R --- drivers/spi/Kconfig | 4 +- drivers/spi/Makefile | 1 + drivers/spi/spi-mem-nodm.c | 89 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 92 insertions(+), 2 deletions(-) create mode 100644 drivers/spi/spi-mem-nodm.c diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a7bb5b35c294..5ee855fc5319 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -16,8 +16,6 @@ config DM_SPI typically use driver-private data instead of extending the spi_slave structure. -if DM_SPI - config SPI_MEM bool "SPI memory extension" help @@ -25,6 +23,8 @@ config SPI_MEM This extension is meant to simplify interaction with SPI memories by providing an high-level interface to send memory-like commands. +if DM_SPI + config ALTERA_SPI bool "Altera SPI driver" help diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 392a92579578..32ba3b61f70d 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_SOFT_SPI) += soft_spi.o obj-$(CONFIG_SPI_MEM) += spi-mem.o else obj-y += spi.o +obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o obj-$(CONFIG_SOFT_SPI) += soft_spi_legacy.o endif diff --git a/drivers/spi/spi-mem-nodm.c b/drivers/spi/spi-mem-nodm.c new file mode 100644 index 000000000000..4d91761f56d3 --- /dev/null +++ b/drivers/spi/spi-mem-nodm.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include +#include + +int spi_mem_exec_op(struct spi_slave *slave, + const struct spi_mem_op *op) +{ + unsigned int pos = 0; + const u8 *tx_buf = NULL; + u8 *rx_buf = NULL; + u8 *op_buf; + int op_len; + u32 flag; + int ret; + int i; + + if (op->data.nbytes) { + if (op->data.dir == SPI_MEM_DATA_IN) + rx_buf = op->data.buf.in; + else + tx_buf = op->data.buf.out; + } + + op_len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes; + op_buf = calloc(1, op_len); + + ret = spi_claim_bus(slave); + if (ret < 0) + return ret; + + op_buf[pos++] = op->cmd.opcode; + + if (op->addr.nbytes) { + for (i = 0; i < op->addr.nbytes; i++) + op_buf[pos + i] = op->addr.val >> + (8 * (op->addr.nbytes - i - 1)); + + pos += op->addr.nbytes; + } + + if (op->dummy.nbytes) + memset(op_buf + pos, 0xff, op->dummy.nbytes); + + /* 1st transfer: opcode + address + dummy cycles */ + flag = SPI_XFER_BEGIN; + /* Make sure to set END bit if no tx or rx data messages follow */ + if (!tx_buf && !rx_buf) + flag |= SPI_XFER_END; + + ret = spi_xfer(slave, op_len * 8, op_buf, NULL, flag); + if (ret) + return ret; + + /* 2nd transfer: rx or tx data path */ + if (tx_buf || rx_buf) { + ret = spi_xfer(slave, op->data.nbytes * 8, tx_buf, + rx_buf, SPI_XFER_END); + if (ret) + return ret; + } + + spi_release_bus(slave); + + for (i = 0; i < pos; i++) + debug("%02x ", op_buf[i]); + debug("| [%dB %s] ", + tx_buf || rx_buf ? op->data.nbytes : 0, + tx_buf || rx_buf ? (tx_buf ? "out" : "in") : "-"); + for (i = 0; i < op->data.nbytes; i++) + debug("%02x ", tx_buf ? tx_buf[i] : rx_buf[i]); + debug("[ret %d]\n", ret); + + free(op_buf); + + if (ret < 0) + return ret; + + return 0; +} + +int spi_mem_adjust_op_size(struct spi_slave *slave, + struct spi_mem_op *op) +{ + return 0; +} -- 2.19.2