All of lore.kernel.org
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Burton <paul.burton@mips.com>,
	James Hogan <jhogan@kernel.org>,
	linux-mips@linux-mips.org,
	Florian Fainelli <f.fainelli@gmail.com>
Subject: [PATCH v4] watchdog: mtx-1: Convert to use GPIO descriptor
Date: Sat, 22 Dec 2018 11:12:31 +0100	[thread overview]
Message-ID: <20181222101231.19092-1-linus.walleij@linaro.org> (raw)

This converts the MTX-1 driver to grab a GPIO descriptor
associated with the device instead of using a resource with
a global GPIO number. Augment the driver and the boardfile.

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v3->v4:
- Collect Florian's Review-tag.
- Cc MIPS maintainers. Please provide an ACK so that Guenther
  can merge this into the watchdog tree!
ChangeLog v2->v3:
- Fix to acces .gpiod rather than .gpio
- Drop resource assignment in boardfile: no resources left
  to pass.
ChangeLog v1->v2:
- Add the correct descriptor table to the board file and
  register it. I missed the existing board file in the
  previous iteration.
---
 arch/mips/alchemy/board-mtx1.c | 18 +++++++++---------
 drivers/watchdog/mtx-1_wdt.c   | 19 +++++++++----------
 2 files changed, 18 insertions(+), 19 deletions(-)

diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index d625e6f99ae7..9d9d4ee31605 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mtd/partitions.h>
@@ -130,20 +131,18 @@ static struct platform_device mtx1_button = {
 	}
 };
 
-static struct resource mtx1_wdt_res[] = {
-	[0] = {
-		.start	= 215,
-		.end	= 215,
-		.name	= "mtx1-wdt-gpio",
-		.flags	= IORESOURCE_IRQ,
-	}
+static struct gpiod_lookup_table mtx1_wdt_gpio_table = {
+	.dev_id = "mtx1-wdt.0",
+	.table = {
+		/* Global number 215 is offset 15 on Alchemy GPIO 2 */
+		GPIO_LOOKUP("alchemy-gpio2", 15, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device mtx1_wdt = {
 	.name = "mtx1-wdt",
 	.id = 0,
-	.num_resources = ARRAY_SIZE(mtx1_wdt_res),
-	.resource = mtx1_wdt_res,
 };
 
 static const struct gpio_led default_leds[] = {
@@ -310,6 +309,7 @@ static int __init mtx1_register_devices(void)
 	}
 	gpio_direction_input(mtx1_gpio_button[0].gpio);
 out:
+	gpiod_add_lookup_table(&mtx1_wdt_gpio_table);
 	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
 }
 arch_initcall(mtx1_register_devices);
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 1fa7d2b32494..e028e0a2eca0 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -39,7 +39,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <asm/mach-au1x00/au1000.h>
 
@@ -55,7 +55,7 @@ static struct {
 	int queue;
 	int default_ticks;
 	unsigned long inuse;
-	unsigned gpio;
+	struct gpio_desc *gpiod;
 	unsigned int gstate;
 } mtx1_wdt_device;
 
@@ -67,7 +67,7 @@ static void mtx1_wdt_trigger(struct timer_list *unused)
 
 	/* toggle wdt gpio */
 	mtx1_wdt_device.gstate = !mtx1_wdt_device.gstate;
-	gpio_set_value(mtx1_wdt_device.gpio, mtx1_wdt_device.gstate);
+	gpiod_set_value(mtx1_wdt_device.gpiod, mtx1_wdt_device.gstate);
 
 	if (mtx1_wdt_device.queue && ticks)
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
@@ -90,7 +90,7 @@ static void mtx1_wdt_start(void)
 	if (!mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 1;
 		mtx1_wdt_device.gstate = 1;
-		gpio_set_value(mtx1_wdt_device.gpio, 1);
+		gpiod_set_value(mtx1_wdt_device.gpiod, 1);
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
 	}
 	mtx1_wdt_device.running++;
@@ -105,7 +105,7 @@ static int mtx1_wdt_stop(void)
 	if (mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 0;
 		mtx1_wdt_device.gstate = 0;
-		gpio_set_value(mtx1_wdt_device.gpio, 0);
+		gpiod_set_value(mtx1_wdt_device.gpiod, 0);
 	}
 	ticks = mtx1_wdt_device.default_ticks;
 	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
@@ -198,12 +198,11 @@ static int mtx1_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	mtx1_wdt_device.gpio = pdev->resource[0].start;
-	ret = devm_gpio_request_one(&pdev->dev, mtx1_wdt_device.gpio,
-				GPIOF_OUT_INIT_HIGH, "mtx1-wdt");
-	if (ret < 0) {
+	mtx1_wdt_device.gpiod = devm_gpiod_get(&pdev->dev,
+					       NULL, GPIOD_OUT_HIGH);
+	if (IS_ERR(mtx1_wdt_device.gpiod)) {
 		dev_err(&pdev->dev, "failed to request gpio");
-		return ret;
+		return PTR_ERR(mtx1_wdt_device.gpiod);
 	}
 
 	spin_lock_init(&mtx1_wdt_device.lock);
-- 
2.19.2

             reply	other threads:[~2018-12-22 10:12 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-22 10:12 Linus Walleij [this message]
2018-12-22 15:04 ` [PATCH v4] watchdog: mtx-1: Convert to use GPIO descriptor Guenter Roeck
2018-12-23 15:26 ` Paul Burton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181222101231.19092-1-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=f.fainelli@gmail.com \
    --cc=jhogan@kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.