All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Jesper Nilsson <jesper.nilsson@axis.com>,
	<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-arm-kernel@axis.com>
Subject: [PATCH 02/24] PCI: keystone: Cleanup error_irq configuration
Date: Mon, 14 Jan 2019 18:54:02 +0530	[thread overview]
Message-ID: <20190114132424.6445-3-kishon@ti.com> (raw)
In-Reply-To: <20190114132424.6445-1-kishon@ti.com>

pci-keystone driver uses irq_of_parse_and_map to get irq number of
error_irq. Use platform_get_irq instead and move platform_get_irq()
and request_irq() of error_irq from ks_pcie_add_pcie_port to ks_pcie_probe
since error_irq is common to both RC mode and EP mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 43 +++++++++--------------
 1 file changed, 17 insertions(+), 26 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 24c38ae570b5..f63268aee2de 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -97,8 +97,6 @@ struct keystone_pcie {
 	struct irq_domain	*legacy_irq_domain;
 	struct device_node	*np;
 
-	int error_irq;
-
 	/* Application register space */
 	void __iomem		*va_app_base;	/* DT 1st resource */
 	struct resource		app;
@@ -726,12 +724,6 @@ static int ks_pcie_config_legacy_irq(struct keystone_pcie *ks_pcie)
 	return ret;
 }
 
-static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
-{
-	if (ks_pcie->error_irq > 0)
-		ks_pcie_enable_error_irq(ks_pcie);
-}
-
 /*
  * When a PCI device does not exist during config cycles, keystone host gets a
  * bus error instead of returning 0xffffffff. This handler always returns 0
@@ -793,7 +785,6 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 
 	ks_pcie_stop_link(pci);
 	ks_pcie_setup_rc_app_regs(ks_pcie);
-	ks_pcie_setup_interrupts(ks_pcie);
 	writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
 			pci->dbi_base + PCI_IO_BASE);
 
@@ -837,23 +828,6 @@ static int __init ks_pcie_add_pcie_port(struct keystone_pcie *ks_pcie,
 	struct device *dev = &pdev->dev;
 	int ret;
 
-	/*
-	 * Index 0 is the platform interrupt for error interrupt
-	 * from RC.  This is optional.
-	 */
-	ks_pcie->error_irq = irq_of_parse_and_map(ks_pcie->np, 0);
-	if (ks_pcie->error_irq <= 0)
-		dev_info(dev, "no error IRQ defined\n");
-	else {
-		ret = request_irq(ks_pcie->error_irq, ks_pcie_err_irq_handler,
-				  IRQF_SHARED, "pcie-error-irq", ks_pcie);
-		if (ret < 0) {
-			dev_err(dev, "failed to request error IRQ %d\n",
-				ks_pcie->error_irq);
-			return ret;
-		}
-	}
-
 	pp->ops = &ks_pcie_host_ops;
 	ret = ks_pcie_dw_host_init(ks_pcie);
 	if (ret) {
@@ -929,6 +903,7 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	u32 num_lanes;
 	char name[10];
 	int ret;
+	int irq;
 	int i;
 
 	ks_pcie = devm_kzalloc(dev, sizeof(*ks_pcie), GFP_KERNEL);
@@ -948,6 +923,20 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "missing IRQ resource: %d\n", irq);
+		return irq;
+	}
+
+	ret = request_irq(irq, ks_pcie_err_irq_handler, IRQF_SHARED,
+			  "ks-pcie-error-irq", ks_pcie);
+	if (ret < 0) {
+		dev_err(dev, "failed to request error IRQ %d\n",
+			irq);
+		return ret;
+	}
+
 	ret = of_property_read_u32(np, "num-lanes", &num_lanes);
 	if (ret)
 		num_lanes = 1;
@@ -1003,6 +992,8 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_get_sync;
 
+	ks_pcie_enable_error_irq(ks_pcie);
+
 	return 0;
 
 err_get_sync:
-- 
2.17.1


WARNING: multiple messages have this Message-ID
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Jesper Nilsson <jesper.nilsson@axis.com>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-arm-kernel@axis.com
Subject: [PATCH 02/24] PCI: keystone: Cleanup error_irq configuration
Date: Mon, 14 Jan 2019 18:54:02 +0530	[thread overview]
Message-ID: <20190114132424.6445-3-kishon@ti.com> (raw)
In-Reply-To: <20190114132424.6445-1-kishon@ti.com>

pci-keystone driver uses irq_of_parse_and_map to get irq number of
error_irq. Use platform_get_irq instead and move platform_get_irq()
and request_irq() of error_irq from ks_pcie_add_pcie_port to ks_pcie_probe
since error_irq is common to both RC mode and EP mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 43 +++++++++--------------
 1 file changed, 17 insertions(+), 26 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 24c38ae570b5..f63268aee2de 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -97,8 +97,6 @@ struct keystone_pcie {
 	struct irq_domain	*legacy_irq_domain;
 	struct device_node	*np;
 
-	int error_irq;
-
 	/* Application register space */
 	void __iomem		*va_app_base;	/* DT 1st resource */
 	struct resource		app;
@@ -726,12 +724,6 @@ static int ks_pcie_config_legacy_irq(struct keystone_pcie *ks_pcie)
 	return ret;
 }
 
-static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
-{
-	if (ks_pcie->error_irq > 0)
-		ks_pcie_enable_error_irq(ks_pcie);
-}
-
 /*
  * When a PCI device does not exist during config cycles, keystone host gets a
  * bus error instead of returning 0xffffffff. This handler always returns 0
@@ -793,7 +785,6 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 
 	ks_pcie_stop_link(pci);
 	ks_pcie_setup_rc_app_regs(ks_pcie);
-	ks_pcie_setup_interrupts(ks_pcie);
 	writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
 			pci->dbi_base + PCI_IO_BASE);
 
@@ -837,23 +828,6 @@ static int __init ks_pcie_add_pcie_port(struct keystone_pcie *ks_pcie,
 	struct device *dev = &pdev->dev;
 	int ret;
 
-	/*
-	 * Index 0 is the platform interrupt for error interrupt
-	 * from RC.  This is optional.
-	 */
-	ks_pcie->error_irq = irq_of_parse_and_map(ks_pcie->np, 0);
-	if (ks_pcie->error_irq <= 0)
-		dev_info(dev, "no error IRQ defined\n");
-	else {
-		ret = request_irq(ks_pcie->error_irq, ks_pcie_err_irq_handler,
-				  IRQF_SHARED, "pcie-error-irq", ks_pcie);
-		if (ret < 0) {
-			dev_err(dev, "failed to request error IRQ %d\n",
-				ks_pcie->error_irq);
-			return ret;
-		}
-	}
-
 	pp->ops = &ks_pcie_host_ops;
 	ret = ks_pcie_dw_host_init(ks_pcie);
 	if (ret) {
@@ -929,6 +903,7 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	u32 num_lanes;
 	char name[10];
 	int ret;
+	int irq;
 	int i;
 
 	ks_pcie = devm_kzalloc(dev, sizeof(*ks_pcie), GFP_KERNEL);
@@ -948,6 +923,20 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "missing IRQ resource: %d\n", irq);
+		return irq;
+	}
+
+	ret = request_irq(irq, ks_pcie_err_irq_handler, IRQF_SHARED,
+			  "ks-pcie-error-irq", ks_pcie);
+	if (ret < 0) {
+		dev_err(dev, "failed to request error IRQ %d\n",
+			irq);
+		return ret;
+	}
+
 	ret = of_property_read_u32(np, "num-lanes", &num_lanes);
 	if (ret)
 		num_lanes = 1;
@@ -1003,6 +992,8 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_get_sync;
 
+	ks_pcie_enable_error_irq(ks_pcie);
+
 	return 0;
 
 err_get_sync:
-- 
2.17.1

WARNING: multiple messages have this Message-ID
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	Jesper Nilsson <jesper.nilsson@axis.com>,
	Arnd Bergmann <arnd@arndb.de>, Jingoo Han <jingoohan1@gmail.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@axis.com, Kishon Vijay Abraham I <kishon@ti.com>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/24] PCI: keystone: Cleanup error_irq configuration
Date: Mon, 14 Jan 2019 18:54:02 +0530	[thread overview]
Message-ID: <20190114132424.6445-3-kishon@ti.com> (raw)
In-Reply-To: <20190114132424.6445-1-kishon@ti.com>

pci-keystone driver uses irq_of_parse_and_map to get irq number of
error_irq. Use platform_get_irq instead and move platform_get_irq()
and request_irq() of error_irq from ks_pcie_add_pcie_port to ks_pcie_probe
since error_irq is common to both RC mode and EP mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 43 +++++++++--------------
 1 file changed, 17 insertions(+), 26 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 24c38ae570b5..f63268aee2de 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -97,8 +97,6 @@ struct keystone_pcie {
 	struct irq_domain	*legacy_irq_domain;
 	struct device_node	*np;
 
-	int error_irq;
-
 	/* Application register space */
 	void __iomem		*va_app_base;	/* DT 1st resource */
 	struct resource		app;
@@ -726,12 +724,6 @@ static int ks_pcie_config_legacy_irq(struct keystone_pcie *ks_pcie)
 	return ret;
 }
 
-static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
-{
-	if (ks_pcie->error_irq > 0)
-		ks_pcie_enable_error_irq(ks_pcie);
-}
-
 /*
  * When a PCI device does not exist during config cycles, keystone host gets a
  * bus error instead of returning 0xffffffff. This handler always returns 0
@@ -793,7 +785,6 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 
 	ks_pcie_stop_link(pci);
 	ks_pcie_setup_rc_app_regs(ks_pcie);
-	ks_pcie_setup_interrupts(ks_pcie);
 	writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
 			pci->dbi_base + PCI_IO_BASE);
 
@@ -837,23 +828,6 @@ static int __init ks_pcie_add_pcie_port(struct keystone_pcie *ks_pcie,
 	struct device *dev = &pdev->dev;
 	int ret;
 
-	/*
-	 * Index 0 is the platform interrupt for error interrupt
-	 * from RC.  This is optional.
-	 */
-	ks_pcie->error_irq = irq_of_parse_and_map(ks_pcie->np, 0);
-	if (ks_pcie->error_irq <= 0)
-		dev_info(dev, "no error IRQ defined\n");
-	else {
-		ret = request_irq(ks_pcie->error_irq, ks_pcie_err_irq_handler,
-				  IRQF_SHARED, "pcie-error-irq", ks_pcie);
-		if (ret < 0) {
-			dev_err(dev, "failed to request error IRQ %d\n",
-				ks_pcie->error_irq);
-			return ret;
-		}
-	}
-
 	pp->ops = &ks_pcie_host_ops;
 	ret = ks_pcie_dw_host_init(ks_pcie);
 	if (ret) {
@@ -929,6 +903,7 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	u32 num_lanes;
 	char name[10];
 	int ret;
+	int irq;
 	int i;
 
 	ks_pcie = devm_kzalloc(dev, sizeof(*ks_pcie), GFP_KERNEL);
@@ -948,6 +923,20 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "missing IRQ resource: %d\n", irq);
+		return irq;
+	}
+
+	ret = request_irq(irq, ks_pcie_err_irq_handler, IRQF_SHARED,
+			  "ks-pcie-error-irq", ks_pcie);
+	if (ret < 0) {
+		dev_err(dev, "failed to request error IRQ %d\n",
+			irq);
+		return ret;
+	}
+
 	ret = of_property_read_u32(np, "num-lanes", &num_lanes);
 	if (ret)
 		num_lanes = 1;
@@ -1003,6 +992,8 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_get_sync;
 
+	ks_pcie_enable_error_irq(ks_pcie);
+
 	return 0;
 
 err_get_sync:
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-01-14 13:25 UTC|newest]

Thread overview: 100+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-14 13:24 [PATCH 00/24] Add support for PCIe RC and EP mode in TI's AM654 SoC Kishon Vijay Abraham I
2019-01-14 13:24 ` Kishon Vijay Abraham I
2019-01-14 13:24 ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 01/24] PCI: keystone: Add start_link/stop_link dw_pcie_ops Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` Kishon Vijay Abraham I [this message]
2019-01-14 13:24   ` [PATCH 02/24] PCI: keystone: Cleanup error_irq configuration Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 03/24] dt-bindings: PCI: keystone: Add "reg-names" binding information Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-22  0:31   ` Rob Herring
2019-01-22  0:31     ` Rob Herring
2019-01-22  0:31     ` Rob Herring
2019-01-14 13:24 ` [PATCH 04/24] PCI: keystone: Perform host initialization in a single function Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 05/24] PCI: keystone: Use platform_get_resource_byname to get memory resources Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 06/24] PCI: keystone: Move initializations to appropriate places Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 07/24] dt-bindings: PCI: Add dt-binding to configure PCIe mode Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-22  0:32   ` Rob Herring
2019-01-22  0:32     ` Rob Herring
2019-01-22  0:32     ` Rob Herring
2019-01-14 13:24 ` [PATCH 08/24] PCI: keystone: Explicitly set the " Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 09/24] dt-bindings: PCI: Document "atu" reg-names Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-22  0:48   ` Rob Herring
2019-01-22  0:48     ` Rob Herring
2019-01-23 10:04     ` Kishon Vijay Abraham I
2019-01-23 10:04       ` Kishon Vijay Abraham I
2019-01-23 10:04       ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 10/24] PCI: dwc: Enable iATU unroll for endpoint too Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 11/24] PCI: dwc: Fix ATU identification for designware version >= 4.80 Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 12/24] PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 13/24] dt-bindings: PCI: Add PCI RC dt binding documentation for AM654 Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-22  0:48   ` Rob Herring
2019-01-22  0:48     ` Rob Herring
2019-01-22  0:48     ` Rob Herring
2019-01-14 13:24 ` [PATCH 14/24] PCI: keystone: Add support for PCIe RC in AM654x Platforms Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 15/24] PCI: keystone: Invoke phy_reset API before enabling PHY Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 16/24] PCI: endpoint: Add support to allocate aligned buffers to be mapped in BARs Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 17/24] PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 18/24] PCI: dwc: Fix dw_pcie_ep_find_capability to return correct capability offset Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-29  9:25   ` Gustavo Pimentel
2019-01-29  9:25     ` Gustavo Pimentel
2019-01-29  9:25     ` Gustavo Pimentel
2019-01-29 10:19     ` Kishon Vijay Abraham I
2019-01-29 10:19       ` Kishon Vijay Abraham I
2019-01-29 10:19       ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 19/24] PCI: dwc: Add callbacks for accessing dbi2 address space Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 20/24] PCI: keystone: Add support for PCIe EP in AM654x Platforms Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 21/24] PCI: designware-ep: Configure RESBAR to advertise the smallest size Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 22/24] PCI: designware-ep: Use aligned ATU window for raising MSI interrupts Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 23/24] misc: pci_endpoint_test: Add support to test PCI EP in AM654x Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 24/24] misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-02-04 16:40 ` [PATCH 00/24] Add support for PCIe RC and EP mode in TI's AM654 SoC Lorenzo Pieralisi
2019-02-04 16:40   ` Lorenzo Pieralisi
2019-02-06 12:50   ` Kishon Vijay Abraham I
2019-02-06 12:50     ` Kishon Vijay Abraham I
2019-02-06 12:50     ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190114132424.6445-3-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jesper.nilsson@axis.com \
    --cc=jingoohan1@gmail.com \
    --cc=linux-arm-kernel@axis.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=m-karicheri2@ti.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.