All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: laurent.pinchart@ideasonboard.com,
	kieran.bingham@ideasonboard.com, linux-media@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Subject: Re: [PATCH v3 4/6] media: adv748x: Store the source subdevice in TX
Date: Wed, 16 Jan 2019 14:33:09 +0100	[thread overview]
Message-ID: <20190116133309.GO7393@bigcity.dyn.berto.se> (raw)
In-Reply-To: <20190110140213.5198-5-jacopo+renesas@jmondi.org>

Hi Jacopo,

Thanks for your patch.

On 2019-01-10 15:02:11 +0100, Jacopo Mondi wrote:
> The power_up_tx() procedure needs to set a few registers conditionally to
> the selected video source, but it currently checks for the provided tx to
> be either TXA or TXB.
> 
> With the introduction of dynamic routing between HDMI and AFE entities to
> TXA, checking which TX the function is operating on is not meaningful anymore.
> 
> To fix this, store the subdevice of the source providing video data to the
> CSI-2 TX in the 'struct adv748x_csi2' representing the TX and check on it.
> 
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/media/i2c/adv748x/adv748x-core.c |  2 +-
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 13 ++++++++++---
>  drivers/media/i2c/adv748x/adv748x.h      |  1 +
>  3 files changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index ad4e6424753a..200e00f93546 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -254,7 +254,7 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
>  	adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
>  
>  	/* ADI Required Write */
> -	if (is_txa(tx)) {
> +	if (tx->src == &state->hdmi.sd) {
>  		adv748x_write_check(state, page, 0xdb, 0x10, &ret);
>  		adv748x_write_check(state, page, 0xd6, 0x07, &ret);
>  	} else {
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 8c3714495e11..353b6b9bf6a7 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -46,9 +46,16 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
>  			return ret;
>  	}
>  
> -	return media_create_pad_link(&src->entity, src_pad,
> -				     &tx->sd.entity, ADV748X_CSI2_SINK,
> -				     enable ? MEDIA_LNK_FL_ENABLED : 0);
> +	ret = media_create_pad_link(&src->entity, src_pad,
> +				    &tx->sd.entity, ADV748X_CSI2_SINK,
> +				    enable ? MEDIA_LNK_FL_ENABLED : 0);
> +	if (ret)
> +		return ret;
> +
> +	if (enable)
> +		tx->src = src;
> +
> +	return 0;
>  }
>  
>  /* -----------------------------------------------------------------------------
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index ab0c84adbea9..d22270f5e2c1 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -84,6 +84,7 @@ struct adv748x_csi2 {
>  	struct media_pad pads[ADV748X_CSI2_NR_PADS];
>  	struct v4l2_ctrl_handler ctrl_hdl;
>  	struct v4l2_ctrl *pixel_rate;
> +	struct v4l2_subdev *src;
>  	struct v4l2_subdev sd;
>  };
>  
> -- 
> 2.20.1
> 

-- 
Regards,
Niklas Söderlund

  reply	other threads:[~2019-01-16 13:33 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-10 14:02 [PATCH v3 0/6] media: adv748x: Implement dynamic routing support Jacopo Mondi
2019-01-10 14:02 ` [PATCH v3 1/6] media: adv748x: Add is_txb() Jacopo Mondi
2019-01-14 14:47   ` Niklas Söderlund
2019-01-10 14:02 ` [PATCH v3 2/6] media: adv748x: Rename reset procedures Jacopo Mondi
2019-01-14 14:49   ` Niklas Söderlund
2019-01-10 14:02 ` [PATCH v3 3/6] media: adv748x: csi2: Link AFE with TXA and TXB Jacopo Mondi
2019-01-14 14:55   ` Niklas Söderlund
2019-01-16  9:10     ` Jacopo Mondi
2019-01-16 12:28       ` Niklas Söderlund
2019-01-16 13:44     ` Niklas Söderlund
2019-01-28 14:47       ` Jacopo Mondi
2019-02-07 15:57         ` Niklas Söderlund
2019-01-10 14:02 ` [PATCH v3 4/6] media: adv748x: Store the source subdevice in TX Jacopo Mondi
2019-01-16 13:33   ` Niklas Söderlund [this message]
2019-01-10 14:02 ` [PATCH v3 5/6] media: adv748x: Store the TX sink in HDMI/AFE Jacopo Mondi
2019-01-16 13:45   ` Niklas Söderlund
2019-01-10 14:02 ` [PATCH v3 6/6] media: adv748x: Implement TX link_setup callback Jacopo Mondi
2019-01-10 14:36   ` Kieran Bingham
2019-01-16 13:46   ` Niklas Söderlund
2019-01-14 14:22 ` [PATCH v3 0/6] media: adv748x: Implement dynamic routing support Kieran Bingham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190116133309.GO7393@bigcity.dyn.berto.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.