From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Thu, 17 Jan 2019 22:39:51 +0530 Subject: [U-Boot] [PATCH v2 7/7] arm: dts: sunxi: Enumerate MMC2 as MMC1 In-Reply-To: <20190117170951.23623-1-jagan@amarulasolutions.com> References: <20190117170951.23623-1-jagan@amarulasolutions.com> Message-ID: <20190117170951.23623-8-jagan@amarulasolutions.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Environment and fastboot MMC devices are configured based number of mmc slots defined on particular board in sunxi platform. If number of slots are not more than 1, it assigns 0 which usually mmc device on SD slot. With DM_MMC it is detected as 0 since mmc0 node always be an mmc device. If number of slots are more than 1, it assigns 1 which assumes 0 is mmc device and 1 is emmc device. But with DM_MMC there is chance of detecting emmc as device 2 since mmc1 is SDIO as per devicetree definition. So override mmc2 to mmc1 in sunxi dtsi, this will eventually detect mmc2 as mmc 1 device even if the board dts has mmc0, mmc1, mmc2. Some platforms like A20 has mmc0...mmc3, but there is no usecases now for enabling all mmc controllers in any of A20 board dts files. Signed-off-by: Jagan Teki --- arch/arm/dts/sunxi-u-boot.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi index 8a9f2a6417..fdd4c80aa4 100644 --- a/arch/arm/dts/sunxi-u-boot.dtsi +++ b/arch/arm/dts/sunxi-u-boot.dtsi @@ -1,6 +1,10 @@ #include / { + aliases { + mmc1 = &mmc2; + }; + binman { filename = "u-boot-sunxi-with-spl.bin"; pad-byte = <0xff>; -- 2.18.0.321.gffc6fa0e3