All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew F. Davis <afd@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 5/7] defconfigs: Add config for DRA7xx High Security EVM with USB Boot support
Date: Thu, 17 Jan 2019 13:43:06 -0600	[thread overview]
Message-ID: <20190117194308.29644-6-afd@ti.com> (raw)
In-Reply-To: <20190117194308.29644-1-afd@ti.com>

Add a new defconfig file for the DRA7xx High Security EVM. This config
is specific for the case of USB booting.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
 MAINTAINERS                         |   1 +
 configs/dra7xx_hs_evm_usb_defconfig | 106 ++++++++++++++++++++++++++++
 2 files changed, 107 insertions(+)
 create mode 100644 configs/dra7xx_hs_evm_usb_defconfig

diff --git a/MAINTAINERS b/MAINTAINERS
index e192db0754..2da1a22e6c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -676,6 +676,7 @@ F:	configs/am335x_hs_evm_uart_defconfig
 F:	configs/am43xx_hs_evm_defconfig
 F:	configs/am57xx_hs_evm_defconfig
 F:	configs/dra7xx_hs_evm_defconfig
+F:	configs/dra7xx_hs_evm_usb_defconfig
 F:	configs/k2hk_hs_evm_defconfig
 F:	configs/k2e_hs_evm_defconfig
 F:	configs/k2g_hs_evm_defconfig
diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig
new file mode 100644
index 0000000000..7842851491
--- /dev/null
+++ b/configs/dra7xx_hs_evm_usb_defconfig
@@ -0,0 +1,106 @@
+CONFIG_ARM=y
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_OMAP54XX=y
+CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
+CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
+CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
+CONFIG_ISW_ENTRY_ADDR=0x40306d50
+CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_ARMV7_LPAE=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_FIT_IMAGE_POST_PROCESS=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard"
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_MISC_INIT_R is not set
+CONFIG_VERSION_VARIABLE=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_DMA_SUPPORT=y
+# CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_USB_GADGET_SUPPORT=y
+CONFIG_SPL_DFU=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
+CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm dra76-evm"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_DWC_AHCI=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_PCF8575_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_MII=y
+CONFIG_DRIVER_TI_CPSW=y
+CONFIG_SPL_PHY=y
+CONFIG_PIPE3_PHY=y
+CONFIG_PMIC_PALMAS=y
+CONFIG_PMIC_LP873X=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_REGULATOR_PALMAS=y
+CONFIG_DM_REGULATOR_LP873X=y
+CONFIG_DM_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_TI_QSPI=y
+CONFIG_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DRA7XX_INDEX=1
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_OMAP=y
+CONFIG_USB_DWC3_PHY_OMAP=y
+CONFIG_OMAP_USB_PHY=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
-- 
2.19.1

  parent reply	other threads:[~2019-01-17 19:43 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-17 19:43 [U-Boot] [PATCH v3 0/7] Add USB boot to HS DRA7xx/AM57xx Andrew F. Davis
2019-01-17 19:43 ` [U-Boot] [PATCH v3 1/7] spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU Andrew F. Davis
2019-01-22 22:40   ` Lukasz Majewski
2019-01-27  3:52   ` [U-Boot] [U-Boot, v3, " Tom Rini
2019-01-17 19:43 ` [U-Boot] [PATCH v3 2/7] dfu: Make DFU support more SPL friendly Andrew F. Davis
2019-01-22 22:41   ` Lukasz Majewski
2019-01-27  3:52   ` [U-Boot] [U-Boot, v3, " Tom Rini
2019-01-17 19:43 ` [U-Boot] [PATCH v3 3/7] dfu: Remove dependency on HUSH parser in SPL Andrew F. Davis
2019-01-22 22:43   ` Lukasz Majewski
2019-01-22 23:41     ` Tom Rini
2019-01-23  6:54       ` Lukasz Majewski
2019-01-23 14:13         ` Andrew F. Davis
2019-01-27  3:52   ` [U-Boot] [U-Boot, v3, " Tom Rini
2019-01-17 19:43 ` [U-Boot] [PATCH v3 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point Andrew F. Davis
2019-01-27  3:52   ` [U-Boot] [U-Boot, v3, " Tom Rini
2019-01-17 19:43 ` Andrew F. Davis [this message]
2019-01-27  3:51   ` [U-Boot] [U-Boot, v3, 5/7] defconfigs: Add config for DRA7xx High Security EVM with USB Boot support Tom Rini
2019-01-28 17:43     ` Andrew F. Davis
2019-01-17 19:43 ` [U-Boot] [PATCH v3 6/7] defconfigs: Add config for AM57xx High Security EVM with USB/UART " Andrew F. Davis
2019-01-17 19:43 ` [U-Boot] [PATCH v3 7/7] doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI Andrew F. Davis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190117194308.29644-6-afd@ti.com \
    --to=afd@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.