From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bartosz Golaszewski <brgl@bgdev.pl>
Subject: [PATCH 01/13] dt-bindings: mfd: add DT bindings for max77650
Date: Fri, 18 Jan 2019 14:42:32 +0100
Message-ID: <20190118134244.22253-2-brgl@bgdev.pl>
References: <20190118134244.22253-1-brgl@bgdev.pl>
Mime-Version: 1.0
Content-Transfer-Encoding: 8bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20190118134244.22253-1-brgl@bgdev.pl>
Sender: linux-kernel-owner@vger.kernel.org
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Linus Walleij <linus.walleij@linaro.org>, Dmitry Torokhov <dmitry.torokhov@gmail.com>, Jacek Anaszewski <jacek.anaszewski@gmail.com>, Pavel Machek <pavel@ucw.cz>, Lee Jones <lee.jones@linaro.org>, Sebastian Reichel <sre@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org, linux-pm@vger.kernel.org, Bartosz Golaszewski <bgolaszewski@baylibre.com>
List-Id: linux-leds@vger.kernel.org

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add a DT binding document for max77650 ultra-low power PMIC. This
describes the core mfd device.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../devicetree/bindings/mfd/max77650.txt      | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/max77650.txt

diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt
new file mode 100644
index 000000000000..84631d3b1e14
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77650.txt
@@ -0,0 +1,28 @@
+MAX77650 ultra low-power PMIC from Maxim Integrated.
+
+Required properties:
+-------------------
+- compatible:		Must be "maxim,max77650"
+- reg:			I2C device address.
+- interrupts:		The interrupt on the parent the controller is
+			connected to.
+- interrupt-parent:	phandle of the parent interrupt controller.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells:	Must be <2>.
+
+For device-tree bindings of sub-modules (regulator, power supply, GPIO, LEDs
+and onkey) refer to the binding documents under the respective sub-system
+directories.
+
+Example:
+--------
+
+	pmic: max77650@48 {
+		compatible = "maxim,max77650";
+		reg = <0x48>;
+
+		interrupt-controller;
+		interrupt-parent = <&gpio2>;
+		#interrupt-cells = <2>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
-- 
2.19.1