From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND] [PATCH v3 2/8] arm: dts: imx7s-warp: Import Linux warp7 dts
Date: Fri, 18 Jan 2019 17:40:08 +0000 [thread overview]
Message-ID: <20190118174014.17860-3-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20190118174014.17860-1-bryan.odonoghue@linaro.org>
This patch imports the Linux kernel warp7 dts as at upstream kernel commit
cf76c364a1e1.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
---
arch/arm/dts/imx7s-warp.dts | 438 ++++++++++++++++++++++++++++++++++++
1 file changed, 438 insertions(+)
create mode 100644 arch/arm/dts/imx7s-warp.dts
diff --git a/arch/arm/dts/imx7s-warp.dts b/arch/arm/dts/imx7s-warp.dts
new file mode 100644
index 0000000000..f7ba2c0a24
--- /dev/null
+++ b/arch/arm/dts/imx7s-warp.dts
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 NXP Semiconductors.
+ * Author: Fabio Estevam <fabio.estevam@nxp.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7s.dtsi"
+
+/ {
+ model = "Warp i.MX7 Board";
+ compatible = "warp,imx7s-warp", "fsl,imx7s";
+
+ memory at 80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pinctrl_gpio>;
+ autorepeat;
+
+ back {
+ label = "Back";
+ gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_BACK>;
+ wakeup-source;
+ };
+ };
+
+ reg_brcm: regulator-brcm {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_brcm_reg>;
+ regulator-name = "brcm_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <200000>;
+ };
+
+ reg_bt: regulator-bt {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt_reg>;
+ enable-active-high;
+ gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ regulator-name = "bt_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx7-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ };
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <884736000>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze3000 at 8 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec: sgtl5000 at a {
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ compatible = "fsl,sgtl5000";
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1_mclk>;
+ VDDA-supply = <&vgen4_reg>;
+ VDDIO-supply = <&vgen4_reg>;
+ VDDD-supply = <&vgen2_reg>;
+ };
+
+ mpl3115 at 60 {
+ compatible = "fsl,mpl3115";
+ reg = <0x60>;
+ };
+};
+
+&sai1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+ <&clks IMX7D_SAI1_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <36864000>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ fsl,dte-mode;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ no-1-8-v;
+ non-removable;
+ vmmc-supply = <®_brcm>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ no-1-8-v;
+ fsl,tuning-step = <2>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_brcm_reg: brcmreggrp {
+ fsl,pins = <
+ MX7D_PAD_SD2_WP__GPIO5_IO10 0x14 /* WL_REG_ON */
+ >;
+ };
+
+ pinctrl_bt_reg: btreggrp {
+ fsl,pins = <
+ MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* BT_REG_ON */
+ >;
+ };
+
+ pinctrl_gpio: gpiogrp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x14
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f
+ MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x30
+ >;
+ };
+
+ pinctrl_sai1_mclk: sai1mclkgrp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79
+ MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79
+ MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x79
+ MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX 0x79
+ MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX 0x79
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x19
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
+ MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1a
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
+ MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1b
+ >;
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
+ >;
+ };
+};
--
2.20.0
next prev parent reply other threads:[~2019-01-18 17:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-18 17:40 [U-Boot] [RESEND] [PATCH v3 0/8] Convert i.MX7 WaRP7 ports to DM Bryan O'Donoghue
2019-01-18 17:40 ` [U-Boot] [RESEND] [PATCH v3 1/8] arm: dts: imx7: Correct spelling mistake in GPIO name Bryan O'Donoghue
2019-01-30 8:57 ` [U-Boot] [U-Boot, RESEND, v3, " sbabic at denx.de
2019-01-18 17:40 ` Bryan O'Donoghue [this message]
2019-01-30 8:57 ` [U-Boot] [U-Boot, RESEND, v3, 2/8] arm: dts: imx7s-warp: Import Linux warp7 dts sbabic at denx.de
2019-01-18 17:40 ` [U-Boot] [RESEND] [PATCH v3 3/8] arm: imx7s-warp: Add DT file hooks Bryan O'Donoghue
2019-01-30 9:05 ` [U-Boot] [U-Boot, RESEND, v3, " sbabic at denx.de
2019-01-18 17:40 ` [U-Boot] [RESEND] [PATCH v3 4/8] arm: imx7s-warp: Convert to DM MMC initialization Bryan O'Donoghue
2019-01-30 8:57 ` [U-Boot] [U-Boot, RESEND, v3, " sbabic at denx.de
2019-01-18 17:40 ` [U-Boot] [RESEND] [PATCH v3 5/8] arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3 Bryan O'Donoghue
2019-01-30 8:57 ` [U-Boot] [U-Boot, RESEND, v3, " sbabic at denx.de
2019-01-18 17:40 ` [U-Boot] [RESEND] [PATCH v3 6/8] warp7: defconfig: Switch on IMX7 GPIO/pinctrl for both ports Bryan O'Donoghue
2019-01-30 9:05 ` [U-Boot] [U-Boot, RESEND, v3, " sbabic at denx.de
2019-01-18 17:40 ` [U-Boot] [RESEND] [PATCH v3 7/8] warp7: defconfig: Switch to DM for I2C Bryan O'Donoghue
2019-01-30 8:57 ` [U-Boot] [U-Boot, RESEND, v3, " sbabic at denx.de
2019-01-18 17:40 ` [U-Boot] [RESEND] [PATCH v3 8/8] arm: imx7s-warp: Convert to DM PMIC Bryan O'Donoghue
2019-01-30 9:15 ` [U-Boot] [U-Boot, RESEND, v3, " sbabic at denx.de
2019-01-18 18:36 ` [U-Boot] [RESEND] [PATCH v3 0/8] Convert i.MX7 WaRP7 ports to DM Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190118174014.17860-3-bryan.odonoghue@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.