[U-Boot] [PATCH v3 17/60] mpc83xx: Make distinct MPC8349EMDS_SDRAM board

[Mario Six <mario.six@gdsys.cc>]

The MPC8349EMDS config file contains config options to enable SDRAM
support. To keep this ability after the Kconfig migration, create a new
MPC8349EMDS_SDRAM board that enables the SDRAM support and remove the
SDRAM support from the original board.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

---

v2 -> v3:
No changes

v1 -> v2:
* Combined config creation and simplification patches

---
 arch/powerpc/cpu/mpc83xx/Kconfig    |   8 +
 board/freescale/mpc8349emds/Kconfig |  13 +
 configs/MPC8349EMDS_SDRAM_defconfig |  27 +
 include/configs/MPC8349EMDS.h       |  76 ---
 include/configs/MPC8349EMDS_SDRAM.h | 731 ++++++++++++++++++++++++++++
 5 files changed, 779 insertions(+), 76 deletions(-)
 create mode 100644 configs/MPC8349EMDS_SDRAM_defconfig
 create mode 100644 include/configs/MPC8349EMDS_SDRAM.h

diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 65f4583ffea..0ce1aad6d03 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -67,6 +67,14 @@ config TARGET_MPC8349EMDS
 	select SYS_FSL_DDR_BE
 	select SYS_FSL_HAS_DDR2
 
+config TARGET_MPC8349EMDS_SDRAM
+	bool "Support MPC8349EMDS_SDRAM"
+	select ARCH_MPC8349
+	select BOARD_EARLY_INIT_F
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_BE
+	select SYS_FSL_HAS_DDR2
+
 config TARGET_MPC8349ITX
 	bool "Support MPC8349ITX"
 	select ARCH_MPC8349
diff --git a/board/freescale/mpc8349emds/Kconfig b/board/freescale/mpc8349emds/Kconfig
index 51f0b34f398..d1541180799 100644
--- a/board/freescale/mpc8349emds/Kconfig
+++ b/board/freescale/mpc8349emds/Kconfig
@@ -10,3 +10,16 @@ config SYS_CONFIG_NAME
 	default "MPC8349EMDS"
 
 endif
+
+if TARGET_MPC8349EMDS_SDRAM
+
+config SYS_BOARD
+	default "mpc8349emds"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_CONFIG_NAME
+	default "MPC8349EMDS_SDRAM"
+
+endif
diff --git a/configs/MPC8349EMDS_SDRAM_defconfig b/configs/MPC8349EMDS_SDRAM_defconfig
new file mode 100644
index 00000000000..2607dfa4f33
--- /dev/null
+++ b/configs/MPC8349EMDS_SDRAM_defconfig
@@ -0,0 +1,27 @@
+CONFIG_PPC=y
+CONFIG_SYS_TEXT_BASE=0xFE000000
+CONFIG_MPC83xx=y
+CONFIG_TARGET_MPC8349EMDS_SDRAM=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=6
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_DATE=y
+# CONFIG_MMC is not set
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_PHY_MARVELL=y
+CONFIG_NETDEVICES=y
+CONFIG_TSEC_ENET=y
+# CONFIG_PCI is not set
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_MPC8XXX_SPI=y
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 93de2cc1c07..fe2b81b905b 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -218,82 +218,6 @@
 #define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_4
 #define CONFIG_SYS_LBC_LBCR	0x00000000
 
-/*
- * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory.
- * if board has SRDAM on local bus, you can define CONFIG_SYS_LB_SDRAM
- */
-#undef CONFIG_SYS_LB_SDRAM
-
-#ifdef CONFIG_SYS_LB_SDRAM
-/* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */
-/*
- * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
- *
- * For BR2, need:
- *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
- *    port-size = 32-bits = BR2[19:20] = 11
- *    no parity checking = BR2[21:22] = 00
- *    SDRAM for MSEL = BR2[24:26] = 011
- *    Valid = BR[31] = 1
- *
- * 0    4    8    12   16   20   24   28
- * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
- */
-
-#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_LBC_SDRAM_BASE \
-					| BR_PS_32	/* 32-bit port */ \
-					| BR_MS_SDRAM	/* MSEL = SDRAM */ \
-					| BR_V)		/* Valid */
-					/* 0xF0001861 */
-#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_LBC_SDRAM_BASE
-#define CONFIG_SYS_LBLAWAR2_PRELIM	(LBLAWAR_EN | LBLAWAR_64MB)
-
-/*
- * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
- *
- * For OR2, need:
- *    64MB mask for AM, OR2[0:7] = 1111 1100
- *                 XAM, OR2[17:18] = 11
- *    9 columns OR2[19-21] = 010
- *    13 rows   OR2[23-25] = 100
- *    EAD set for extra time OR[31] = 1
- *
- * 0    4    8    12   16   20   24   28
- * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
- */
-
-#define CONFIG_SYS_OR2_PRELIM	(OR_AM_64MB \
-			| OR_SDRAM_XAM \
-			| ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \
-			| ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \
-			| OR_SDRAM_EAD)
-			/* 0xFC006901 */
-
-				/* LB sdram refresh timer, about 6us */
-#define CONFIG_SYS_LBC_LSRT	0x32000000
-				/* LB refresh timer prescal, 266MHz/32 */
-#define CONFIG_SYS_LBC_MRTPR	0x20000000
-
-#define CONFIG_SYS_LBC_LSDMR_COMMON    (LSDMR_RFEN	\
-				| LSDMR_BSMA1516	\
-				| LSDMR_RFCR8		\
-				| LSDMR_PRETOACT6	\
-				| LSDMR_ACTTORW3	\
-				| LSDMR_BL8		\
-				| LSDMR_WRC3		\
-				| LSDMR_CL3)
-
-/*
- * SDRAM Controller configuration sequence.
- */
-#define CONFIG_SYS_LBC_LSDMR_1	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
-#define CONFIG_SYS_LBC_LSDMR_2	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_3	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_4	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
-#define CONFIG_SYS_LBC_LSDMR_5	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
-#endif
-
 /*
  * Serial Port
  */
diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h
new file mode 100644
index 00000000000..b610b555a75
--- /dev/null
+++ b/include/configs/MPC8349EMDS_SDRAM.h
@@ -0,0 +1,731 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2010
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ */
+
+/*
+ * mpc8349emds board configuration file
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1	/* E300 Family */
+
+#define CONFIG_PCI_66M
+#ifdef CONFIG_PCI_66M
+#define CONFIG_83XX_CLKIN	66000000	/* in Hz */
+#else
+#define CONFIG_83XX_CLKIN	33000000	/* in Hz */
+#endif
+
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK	66666666	/* in Hz */
+#endif /* CONFIG_PCISLAVE */
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#ifdef CONFIG_PCI_66M
+#define CONFIG_SYS_CLK_FREQ	66000000
+#define HRCWL_CSB_TO_CLKIN	HRCWL_CSB_TO_CLKIN_4X1
+#else
+#define CONFIG_SYS_CLK_FREQ	33000000
+#define HRCWL_CSB_TO_CLKIN	HRCWL_CSB_TO_CLKIN_8X1
+#endif
+#endif
+
+#define CONFIG_SYS_IMMR		0xE0000000
+
+#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00000000      /* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00100000
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_DDR_ECC			/* support DDR ECC function */
+#define CONFIG_DDR_ECC_CMD		/* use DDR ECC user commands */
+#define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
+
+/*
+ * SYS_FSL_DDR2 is selected in Kconfig to use unified DDR driver
+ * unselect it to use old spd_sdram.c
+ */
+#define CONFIG_SYS_SPD_BUS_NUM	0
+#define SPD_EEPROM_ADDRESS1	0x52
+#define SPD_EEPROM_ADDRESS2	0x51
+#define CONFIG_DIMM_SLOTS_PER_CTLR	2
+#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
+
+/*
+ * 32-bit data path mode.
+ *
+ * Please note that using this mode for devices with the real density of 64-bit
+ * effectively reduces the amount of available memory due to the effect of
+ * wrapping around while translating address to row/columns, for example in the
+ * 256MB module the upper 128MB get aliased with contents of the lower
+ * 128MB); normally this define should be used for devices with real 32-bit
+ * data path.
+ */
+#undef CONFIG_DDR_32BIT
+
+#define CONFIG_SYS_DDR_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN \
+					| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#undef  CONFIG_DDR_2T_TIMING
+
+/*
+ * DDRCDR - DDR Control Driver Register
+ */
+#define CONFIG_SYS_DDRCDR_VALUE	0x80080001
+
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+#else
+/*
+ * Manually set up DDR parameters
+ */
+#define CONFIG_SYS_DDR_SIZE		256		/* MB */
+#if defined(CONFIG_DDR_II)
+#define CONFIG_SYS_DDRCDR		0x80080001
+#define CONFIG_SYS_DDR_CS2_BNDS		0x0000000f
+#define CONFIG_SYS_DDR_CS2_CONFIG	0x80330102
+#define CONFIG_SYS_DDR_TIMING_0		0x00220802
+#define CONFIG_SYS_DDR_TIMING_1		0x38357322
+#define CONFIG_SYS_DDR_TIMING_2		0x2f9048c8
+#define CONFIG_SYS_DDR_TIMING_3		0x00000000
+#define CONFIG_SYS_DDR_CLK_CNTL		0x02000000
+#define CONFIG_SYS_DDR_MODE		0x47d00432
+#define CONFIG_SYS_DDR_MODE2		0x8000c000
+#define CONFIG_SYS_DDR_INTERVAL		0x03cf0080
+#define CONFIG_SYS_DDR_SDRAM_CFG	0x43000000
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
+#else
+#define CONFIG_SYS_DDR_CS2_CONFIG	(CSCONFIG_EN \
+				| CSCONFIG_ROW_BIT_13 \
+				| CSCONFIG_COL_BIT_10)
+#define CONFIG_SYS_DDR_TIMING_1	0x36332321
+#define CONFIG_SYS_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
+#define CONFIG_SYS_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
+#define CONFIG_SYS_DDR_INTERVAL	0x04060100	/* autocharge,no open page */
+
+#if defined(CONFIG_DDR_32BIT)
+/* set burst length to 8 for 32-bit data path */
+				/* DLL,normal,seq,4/2.5, 8 burst len */
+#define CONFIG_SYS_DDR_MODE	0x00000023
+#else
+/* the default burst length is 4 - for 64-bit data path */
+				/* DLL,normal,seq,4/2.5, 4 burst len */
+#define CONFIG_SYS_DDR_MODE	0x00000022
+#endif
+#endif
+#endif
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xF0000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CONFIG_SYS_FLASH_SIZE		32	/* max flash size in MB */
+
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE \
+				| BR_PS_16	/* 16 bit port  */ \
+				| BR_MS_GPCM	/* MSEL = GPCM */ \
+				| BR_V)		/* valid */
+#define CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
+				| OR_UPM_XAM \
+				| OR_GPCM_CSNT \
+				| OR_GPCM_ACS_DIV2 \
+				| OR_GPCM_XACS \
+				| OR_GPCM_SCY_15 \
+				| OR_GPCM_TRLX_SET \
+				| OR_GPCM_EHTR_SET \
+				| OR_GPCM_EAD)
+
+					/* window base at flash base */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_32MB)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max sectors per device */
+
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
+
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
+#else
+#undef  CONFIG_SYS_RAMBOOT
+#endif
+
+/*
+ * BCSR register on local bus 32KB, 8-bit wide for MDS config reg
+ */
+#define CONFIG_SYS_BCSR			0xE2400000
+					/* Access window base@BCSR base */
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_BCSR
+#define CONFIG_SYS_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_32KB)
+#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_BCSR \
+					| BR_PS_8 \
+					| BR_MS_GPCM \
+					| BR_V)
+					/* 0x00000801 */
+#define CONFIG_SYS_OR1_PRELIM		(OR_AM_32KB \
+					| OR_GPCM_XAM \
+					| OR_GPCM_CSNT \
+					| OR_GPCM_SCY_15 \
+					| OR_GPCM_TRLX_CLEAR \
+					| OR_GPCM_EHTR_CLEAR)
+					/* 0xFFFFE8F0 */
+
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM addr */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000	/* Size of used area in RAM*/
+
+#define CONFIG_SYS_GBL_DATA_OFFSET	\
+			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)	/* Reserve 512 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)	/* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ *    LCRR:  DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_4
+#define CONFIG_SYS_LBC_LBCR	0x00000000
+
+/*
+ * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory.
+ */
+
+/* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
+ */
+
+#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_LBC_SDRAM_BASE \
+					| BR_PS_32	/* 32-bit port */ \
+					| BR_MS_SDRAM	/* MSEL = SDRAM */ \
+					| BR_V)		/* Valid */
+					/* 0xF0001861 */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_LBC_SDRAM_BASE
+#define CONFIG_SYS_LBLAWAR2_PRELIM	(LBLAWAR_EN | LBLAWAR_64MB)
+
+/*
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *                 XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
+ */
+
+#define CONFIG_SYS_OR2_PRELIM	(OR_AM_64MB \
+			| OR_SDRAM_XAM \
+			| ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \
+			| ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \
+			| OR_SDRAM_EAD)
+			/* 0xFC006901 */
+
+				/* LB sdram refresh timer, about 6us */
+#define CONFIG_SYS_LBC_LSRT	0x32000000
+				/* LB refresh timer prescal, 266MHz/32 */
+#define CONFIG_SYS_LBC_MRTPR	0x20000000
+
+#define CONFIG_SYS_LBC_LSDMR_COMMON    (LSDMR_RFEN	\
+				| LSDMR_BSMA1516	\
+				| LSDMR_RFCR8		\
+				| LSDMR_PRETOACT6	\
+				| LSDMR_ACTTORW3	\
+				| LSDMR_BL8		\
+				| LSDMR_WRC3		\
+				| LSDMR_CL3)
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CONFIG_SYS_LBC_LSDMR_1	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
+#define CONFIG_SYS_LBC_LSDMR_2	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_3	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_4	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
+#define CONFIG_SYS_LBC_LSDMR_5	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
+
+/*
+ * Serial Port
+ */
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
+
+#define CONFIG_SYS_BAUDRATE_TABLE  \
+		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
+
+/* SPI */
+#undef CONFIG_SOFT_SPI			/* SPI bit-banged */
+
+/* GPIOs.  Used as SPI chip selects */
+#define CONFIG_SYS_GPIO1_PRELIM
+#define CONFIG_SYS_GPIO1_DIR		0xC0000000  /* SPI CS on 0, LED on 1 */
+#define CONFIG_SYS_GPIO1_DAT		0xC0000000  /* Both are active LOW */
+
+/* TSEC */
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
+#define CONFIG_SYS_TSEC2_OFFSET 0x25000
+#define CONFIG_SYS_TSEC2	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
+
+/* USB */
+#define CONFIG_SYS_USE_MPC834XSYS_USB_PHY	1 /* Use SYS board PHY */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
+#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS		0xE2000000
+#define CONFIG_SYS_PCI1_IO_SIZE		0x00100000	/* 1M */
+
+#define CONFIG_SYS_PCI2_MEM_BASE	0xA0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI2_MMIO_BASE	0xB0000000
+#define CONFIG_SYS_PCI2_MMIO_PHYS	CONFIG_SYS_PCI2_MMIO_BASE
+#define CONFIG_SYS_PCI2_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI2_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI2_IO_PHYS		0xE2100000
+#define CONFIG_SYS_PCI2_IO_SIZE		0x00100000	/* 1M */
+
+#if defined(CONFIG_PCI)
+
+#define PCI_ONE_PCI1
+#if defined(PCI_64BIT)
+#undef PCI_ALL_PCI1
+#undef PCI_TWO_PCI1
+#undef PCI_ONE_PCI1
+#endif
+
+#define CONFIG_83XX_PCI_STREAMING
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+	#define PCI_ENET0_IOADDR	0xFIXME
+	#define PCI_ENET0_MEMADDR	0xFIXME
+	#define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
+
+#endif	/* CONFIG_PCI */
+
+/*
+ * TSEC configuration
+ */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#define CONFIG_GMII		1	/* MII PHY management */
+#define CONFIG_TSEC1		1
+#define CONFIG_TSEC1_NAME	"TSEC0"
+#define CONFIG_TSEC2		1
+#define CONFIG_TSEC2_NAME	"TSEC1"
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC1_FLAGS		TSEC_GIGABIT
+#define TSEC2_FLAGS		TSEC_GIGABIT
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME		"TSEC0"
+
+#endif	/* CONFIG_TSEC_ENET */
+
+/*
+ * Configure on-board RTC
+ */
+#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* at address 0x68 */
+
+/*
+ * Environment
+ */
+#ifndef CONFIG_SYS_RAMBOOT
+	#define CONFIG_ENV_ADDR		\
+			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
+	#define CONFIG_ENV_SIZE		0x2000
+
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+
+#else
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/*
+ * Command line configuration.
+ */
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 256 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+				/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
+
+#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+
+#if 1 /*528/264*/
+#define CONFIG_SYS_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CORE_TO_CSB_2X1)
+#elif 0 /*396/132*/
+#define CONFIG_SYS_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN |\
+	HRCWL_VCO_1X4 |\
+	HRCWL_CORE_TO_CSB_3X1)
+#elif 0 /*264/132*/
+#define CONFIG_SYS_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN |\
+	HRCWL_VCO_1X4 |\
+	HRCWL_CORE_TO_CSB_2X1)
+#elif 0 /*132/132*/
+#define CONFIG_SYS_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN |\
+	HRCWL_VCO_1X4 |\
+	HRCWL_CORE_TO_CSB_1X1)
+#elif 0 /*264/264 */
+#define CONFIG_SYS_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN |\
+	HRCWL_VCO_1X4 |\
+	HRCWL_CORE_TO_CSB_1X1)
+#endif
+
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_SYS_HRCW_HIGH (\
+	HRCWH_PCI_AGENT |\
+	HRCWH_64_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_DISABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII)
+#else
+#if defined(PCI_64BIT)
+#define CONFIG_SYS_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_64_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII)
+#else
+#define CONFIG_SYS_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_32_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII)
+#endif /* PCI_64BIT */
+#endif /* CONFIG_PCISLAVE */
+
+/*
+ * System performance
+ */
+#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CONFIG_SYS_ACR_RPTCNT	3	/* Arbiter repeat count (0-7) */
+#define CONFIG_SYS_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CONFIG_SYS_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CONFIG_SYS_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
+#define CONFIG_SYS_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
+
+/* System IO Config */
+#define CONFIG_SYS_SICRH 0
+#define CONFIG_SYS_SICRL SICRL_LDP_A
+
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK \
+				| HID0_ENABLE_INSTRUCTION_CACHE)
+
+/* #define CONFIG_SYS_HID0_FINAL	(\
+	HID0_ENABLE_INSTRUCTION_CACHE |\
+	HID0_ENABLE_M_BIT |\
+	HID0_ENABLE_ADDRESS_BROADCAST) */
+
+#define CONFIG_SYS_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
+
+/* DDR @ 0x00000000 */
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE \
+				| BATL_PP_RW \
+				| BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
+
+/* PCI @ 0x80000000 */
+#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_BASE \
+				| BATL_PP_RW \
+				| BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_PCI1_MEM_BASE \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MMIO_BASE \
+				| BATL_PP_RW \
+				| BATL_CACHEINHIBIT \
+				| BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MMIO_BASE \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
+#else
+#define CONFIG_SYS_IBAT1L	(0)
+#define CONFIG_SYS_IBAT1U	(0)
+#define CONFIG_SYS_IBAT2L	(0)
+#define CONFIG_SYS_IBAT2U	(0)
+#endif
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_PCI2_MEM_BASE \
+				| BATL_PP_RW \
+				| BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_PCI2_MEM_BASE \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCI2_MMIO_BASE \
+				| BATL_PP_RW \
+				| BATL_CACHEINHIBIT \
+				| BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_PCI2_MMIO_BASE \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
+#else
+#define CONFIG_SYS_IBAT3L	(0)
+#define CONFIG_SYS_IBAT3U	(0)
+#define CONFIG_SYS_IBAT4L	(0)
+#define CONFIG_SYS_IBAT4U	(0)
+#endif
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR \
+				| BATL_PP_RW \
+				| BATL_CACHEINHIBIT \
+				| BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
+
+/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+#define CONFIG_SYS_IBAT6L	(0xF0000000 \
+				| BATL_PP_RW \
+				| BATL_MEMCOHERENCE \
+				| BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT6U	(0xF0000000 \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
+
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH0
+#endif
+
+#define CONFIG_HOSTNAME		"mpc8349emds"
+#define CONFIG_ROOTPATH		"/nfsroot/rootfs"
+#define CONFIG_BOOTFILE		"uImage"
+
+#define CONFIG_LOADADDR	800000	/* default location for tftp and bootm */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+	"echo"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=mpc8349emds\0"					\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"	\
+		"bootm\0"						\
+	"load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0"		\
+	"update=protect off fe000000 fe03ffff; "			\
+		"era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"\
+	"upd=run load update\0"						\
+	"fdtaddr=780000\0"						\
+	"fdtfile=mpc834x_mds.dtb\0"					\
+	""
+
+#define CONFIG_NFSBOOTCOMMAND						\
+	"setenv bootargs root=/dev/nfs rw "				\
+		"nfsroot=$serverip:$rootpath "				\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"	\
+							"$netdev:off "	\
+		"console=$consoledev,$baudrate $othbootargs;"		\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+	"setenv bootargs root=/dev/ram rw "				\
+		"console=$consoledev,$baudrate $othbootargs;"		\
+	"tftp $ramdiskaddr $ramdiskfile;"				\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#endif	/* __CONFIG_H */
-- 
2.20.1