* [PATCH 1/6] squashfs: add squashfs support
2019-01-22 3:24 [PATCH 0/6] squashfs: introduce squashfs support zhengbin
@ 2019-01-22 3:24 ` zhengbin
2019-01-22 3:24 ` [PATCH 2/6] squashfs: add mount test zhengbin
` (6 subsequent siblings)
7 siblings, 0 replies; 16+ messages in thread
From: zhengbin @ 2019-01-22 3:24 UTC (permalink / raw)
To: david, guaneryu, fstests; +Cc: houtao1, zhaohongjiang, zhengbin13
This patch add squashfs support in xfstests-dev. Add 'readonly'
directory support instead of generic/shard in tests which can
also be used for other readonly filesystems, The reason is:
The step of tests in readonly filesystem(such as squashfs) are
as follows:
1. write data in $SCRATCH_DEV
2. mkfs $SCRATCH_DEV file
3. mount file $SCRATCH_MNT
4. test in $SCRATCH_MNT
While the rw filesystems are as follows:
1. mkfs $SCRATCH_DEV
2. mount $SCRATCH_DEV $SCRATCH_MNT
3. test in $SCRATCH_MNT(just write data in $SCRATCH_MNT)
The tests in generic/shared are set as rw filesystem, it is hard
to use this in readonly filesystem, use 'readonly' dir which can
be easier to read.
PS: As readonly filesystems need to mkfs in every test, do not
use TEST_DEV&TEST_DIR.
Signed-off-by: zhengbin <zhengbin13@huawei.com>
---
README.squashfs | 12 +++++++++++
check | 19 ++++++++++++++---
common/config | 6 ++++++
common/rc | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
4 files changed, 95 insertions(+), 5 deletions(-)
create mode 100644 README.squashfs
diff --git a/README.squashfs b/README.squashfs
new file mode 100644
index 00000000..34b9ade8
--- /dev/null
+++ b/README.squashfs
@@ -0,0 +1,12 @@
+To run xfstest on squashfs, configure the variables of TEST and SCRATCH
+directories to be used as the "base fs" and run './check -squashfs'.
+
+For example, the following config file can be used to run tests on
+xfs test/scratch directories:
+
+ TEST_DEV=/root/test
+ TEST_DIR=/mnt/test
+ SCRATCH_DEV=/root/scratch
+ SCRATCH_MNT=/mnt/scratch
+
+TEST_DEV and SCRATCH_DEV should be directories.
diff --git a/check b/check
index 77a06b00..898ca2d5 100755
--- a/check
+++ b/check
@@ -45,6 +45,7 @@ timestamp=${TIMESTAMP:=false}
rm -f $tmp.list $tmp.tmp $tmp.grep $here/$iam.out $tmp.xlist $tmp.report.*
SRC_GROUPS="generic shared"
+SRC_READONLY_GROUPS="readonly"
export SRC_DIR="tests"
usage()
@@ -60,6 +61,7 @@ check options
-pvfs2 test PVFS2
-tmpfs test TMPFS
-ubifs test ubifs
+ -squashfs test squashfs
-l line mode diff
-udiff show unified diff (default)
-n show me, do not run tests
@@ -111,6 +113,16 @@ examples:
exit 0
}
+# Get Source group, if fstyp is readonly, use tests/readonly dir
+get_src_group()
+{
+ local grp=$SRC_GROUPS
+ if [ "$FSTYP" == "squashfs" ]; then
+ grp=$SRC_READONLY_GROUPS
+ fi
+ echo $grp
+}
+
get_sub_group_list()
{
local d=$1
@@ -138,7 +150,7 @@ get_group_list()
return
fi
- for d in $SRC_GROUPS $FSTYP; do
+ for d in $(get_src_group) $FSTYP; do
if ! test -d "$SRC_DIR/$d" ; then
continue
fi
@@ -152,7 +164,7 @@ get_group_list()
get_all_tests()
{
touch $tmp.list
- for d in $SRC_GROUPS $FSTYP; do
+ for d in $(get_src_group) $FSTYP; do
if ! test -d "$SRC_DIR/$d" ; then
continue
fi
@@ -258,6 +270,7 @@ while [ $# -gt 0 ]; do
-nfs) FSTYP=nfs ;;
-glusterfs) FSTYP=glusterfs ;;
+ -squashfs) FSTYP=squashfs ;;
-cifs) FSTYP=cifs ;;
-9p) FSTYP=9p ;;
-overlay) FSTYP=overlay; export OVERLAY=true ;;
@@ -321,7 +334,7 @@ if ! . ./common/rc; then
fi
if [ -n "$subdir_xfile" ]; then
- for d in $SRC_GROUPS $FSTYP; do
+ for d in $(get_src_group) $FSTYP; do
[ -f $SRC_DIR/$d/$subdir_xfile ] || continue
for f in `sed "s/#.*$//" $SRC_DIR/$d/$subdir_xfile`; do
echo $d/$f >> $tmp.xlist
diff --git a/common/config b/common/config
index 64f87057..ef507d1d 100644
--- a/common/config
+++ b/common/config
@@ -223,6 +223,7 @@ case "$HOSTOS" in
Linux)
export MKFS_XFS_PROG=$(type -P mkfs.xfs)
export MKFS_EXT4_PROG=$(type -P mkfs.ext4)
+ export MKFS_SQUASHFS_PROG=$(type -P mksquashfs)
export MKFS_UDF_PROG=$(type -P mkudffs)
export MKFS_BTRFS_PROG=$(set_mkfs_prog_path_with_opts btrfs)
export MKFS_F2FS_PROG=$(set_mkfs_prog_path_with_opts f2fs)
@@ -474,6 +475,11 @@ _check_device()
_fatal "common/config: $name ($dev) is not a directory for overlay"
fi
;;
+ squashfs)
+ if [ ! -d "$dev" ]; then
+ _fatal "common/config: $name ($dev) is not a directory for squashfs"
+ fi
+ ;;
ubifs)
if [ ! -c "$dev" ]; then
_fatal "common/config: $name ($dev) is not a character device"
diff --git a/common/rc b/common/rc
index b8ed1776..39810342 100644
--- a/common/rc
+++ b/common/rc
@@ -6,6 +6,9 @@
BC=$(which bc 2> /dev/null) || BC=
+# compress file for readonly filesystem(squashfs)
+export SCRATCH_COMPRESS_FILE=$SCRATCH_DEV/scratch_compress_file
+
# Some tests are not relevant or functional when testing XFS realtime
# subvolumes along with the rtinherit=1 mkfs option. In these cases,
# this test will opt-out of the test.
@@ -133,6 +136,9 @@ case "$FSTYP" in
ext4)
[ "$MKFS_EXT4_PROG" = "" ] && _fatal "mkfs.ext4 not found"
;;
+ squashfs)
+ [ "$MKFS_SQUASHFS_PROG" = "" ] && _fatal "mksquashfs not found"
+ ;;
f2fs)
[ "$MKFS_F2FS_PROG" = "" ] && _fatal "mkfs.f2fs not found"
;;
@@ -327,6 +333,9 @@ _try_scratch_mount()
if [ "$FSTYP" == "overlay" ]; then
_overlay_scratch_mount $*
return $?
+ elif [ "$FSTYP" == "squashfs" ]; then
+ _mount -t $FSTYP $SCRATCH_OPTIONS $* $SCRATCH_COMPRESS_FILE $SCRATCH_MNT
+ return $?
fi
_mount -t $FSTYP `_scratch_mount_options $*`
}
@@ -343,7 +352,7 @@ _scratch_unmount()
overlay)
_overlay_scratch_unmount
;;
- btrfs)
+ btrfs|squashfs)
$UMOUNT_PROG $SCRATCH_MNT
;;
*)
@@ -398,6 +407,9 @@ _test_mount()
if [ "$FSTYP" == "overlay" ]; then
_overlay_test_mount $*
return $?
+ elif [ "$FSTYP" == "squashfs" ]; then
+ # squashfs do not use TEST_DEV, TEST_DIR, just return
+ return 0
fi
_test_options mount
_mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR
@@ -407,6 +419,9 @@ _test_unmount()
{
if [ "$FSTYP" == "overlay" ]; then
_overlay_test_unmount
+ elif [ "$FSTYP" == "squashfs" ]; then
+ # squashfs do not use TEST_DEV, TEST_DIR, just return
+ return
else
$UMOUNT_PROG $TEST_DEV
fi
@@ -580,6 +595,28 @@ _scratch_mkfs_ext4()
return $mkfs_status
}
+_scratch_mkfs_squashfs()
+{
+ local mkfs_cmd="$MKFS_SQUASHFS_PROG"
+ local mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \""
+ mkdir -p /tmp
+ rm -f $SCRATCH_COMPRESS_FILE
+ local mkfs_status
+ local tmp=`mktemp -u`
+ local extra_mkfs_options=$*
+
+ eval "$mkfs_cmd $SCRATCH_DEV $SCRATCH_COMPRESS_FILE $MKFS_OPTIONS $extra_mkfs_options" \
+ 2>$tmp.mkfserr 1>$tmp.mkfsstd
+ mkfs_status=$?
+
+ # output stored mkfs output, filtering unnecessary output from stderr
+ cat $tmp.mkfsstd
+ eval "cat $tmp.mkfserr | $mkfs_filter" >&2
+
+ rm -f $tmp.mkfserr $tmp.mkfsstd
+ return $mkfs_status
+}
+
_test_mkfs()
{
case $FSTYP in
@@ -613,6 +650,9 @@ _test_mkfs()
ext2|ext3|ext4)
$MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
;;
+ squashfs)
+ # squashfs do not use TEST_DEV, TEST_DIR, just return
+ ;;
*)
yes | $MKFS_PROG -t $FSTYP -- $MKFS_OPTIONS $* $TEST_DEV
;;
@@ -713,6 +753,10 @@ _scratch_mkfs()
_scratch_mkfs_ext4 $*
return $?
;;
+ squashfs)
+ _scratch_mkfs_squashfs $*
+ return $?
+ ;;
xfs)
_scratch_mkfs_xfs $*
return $?
@@ -1505,6 +1549,18 @@ _require_scratch_nocheck()
_notrun "this test requires a valid \$SCRATCH_MNT and unique $SCRATCH_DEV"
fi
;;
+ squashfs)
+ if [ ! -d "$SCRATCH_DEV" ]; then
+ _notrun "this test requires a valid \$SCRATCH_DEV"
+ fi
+ if [ ! -d "$SCRATCH_MNT" ]; then
+ _notrun "this test requires a valid \$SCRATCH_MNT"
+ fi
+ # umount SCRATCH_MNT
+ _scratch_unmount >/dev/null 2>&1
+ rm -f ${RESULT_DIR}/require_scratch
+ return
+ ;;
ubifs)
# ubifs needs an UBI volume. This will be a char device, not a block device.
if [ ! -c "$SCRATCH_DEV" ]; then
@@ -3599,7 +3655,10 @@ init_rc()
# Sanity check that TEST partition is not mounted at another mount point
# or as another fs type
- _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR $FSTYP || exit 1
+ # if fs type is squashfs, do not check mount on TEST_DEV TEST_DIR
+ if [ "$FSTYP" != "squashfs" ]; then
+ _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR $FSTYP || exit 1
+ fi
if [ -n "$SCRATCH_DEV" ]; then
# Sanity check that SCRATCH partition is not mounted at another
# mount point, because it is about to be unmounted and formatted.
--
2.16.2.dirty
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 2/6] squashfs: add mount test
2019-01-22 3:24 [PATCH 0/6] squashfs: introduce squashfs support zhengbin
2019-01-22 3:24 ` [PATCH 1/6] squashfs: add " zhengbin
@ 2019-01-22 3:24 ` zhengbin
2019-01-22 3:24 ` [PATCH 3/6] squashfs: add metadata test zhengbin
` (5 subsequent siblings)
7 siblings, 0 replies; 16+ messages in thread
From: zhengbin @ 2019-01-22 3:24 UTC (permalink / raw)
To: david, guaneryu, fstests; +Cc: houtao1, zhaohongjiang, zhengbin13
This patch add mount test which is modified from generic/067.
Signed-off-by: zhengbin <zhengbin13@huawei.com>
---
tests/readonly/001 | 97 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/readonly/001.out | 2 +
tests/readonly/Makefile | 20 ++++++++++
tests/readonly/group | 6 +++
4 files changed, 125 insertions(+)
create mode 100755 tests/readonly/001
create mode 100644 tests/readonly/001.out
create mode 100644 tests/readonly/Makefile
create mode 100644 tests/readonly/group
diff --git a/tests/readonly/001 b/tests/readonly/001
new file mode 100755
index 00000000..164722d2
--- /dev/null
+++ b/tests/readonly/001
@@ -0,0 +1,97 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2015 Red Hat Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 001. Modifed from generic/067.
+#
+# Some random mount/umount corner case tests
+#
+# - mount at a nonexistent mount point
+# - mount a free loop device
+# - mount with a wrong fs type specified
+# - umount an symlink to device which is not mounted
+# - umount a path with too long name
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_loop
+
+rm -f $seqres.full
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+
+# kernel should not hang nor oops when mounting fs to nonexistent mount point
+mount_nonexistent_mnt()
+{
+ echo "# mount to nonexistent mount point" >>$seqres.full
+ rm -rf $SCRATCH_DEV/nosuchdir
+ $MOUNT_PROG -t $FSTYP $SCRATCH_COMPRESS_FILE $SCRATCH_DEV/nosuchdir >>$seqres.full 2>&1
+}
+
+# fs driver should be able to handle mounting a free loop device gracefully
+# xfs ever hung, "ec53d1d xfs: don't block on buffer read errors" fixed it
+mount_free_loopdev()
+{
+ echo "# mount a free loop device" >>$seqres.full
+ loopdev=`losetup -f`
+ $MOUNT_PROG -t $FSTYP $loopdev $SCRATCH_MNT >>$seqres.full 2>&1
+}
+
+# mount with wrong fs type specified.
+# This should fail gracefully, no hang no oops are expected
+mount_wrong_fstype()
+{
+ local fs=ext4
+ echo "# mount with wrong fs type" >>$seqres.full
+ $MOUNT_PROG -t $fs $SCRATCH_COMPRESS_FILE $SCRATCH_MNT >>$seqres.full 2>&1
+}
+
+# umount a symlink to device, which is not mounted.
+# This should fail gracefully, no hang no oops are expected
+umount_symlink_device()
+{
+ local symlink=$SCRATCH_DEV/$seq.scratch_dev_symlink
+ rm -f $symlink
+ echo "# umount symlink to device, which is not mounted" >>$seqres.full
+ ln -s $SCRATCH_COMPRESS_FILE $symlink
+ $UMOUNT_PROG $symlink >>$seqres.full 2>&1
+ rm -f $symlink
+}
+
+# umount a path name that is 256 bytes long, this should fail gracefully,
+# and the following umount should not hang nor oops
+umount_toolong_name()
+{
+ local longname=$SCRATCH_MNT/`$PERL_PROG -e 'print "a"x256;'`
+
+ _scratch_mount 2>&1 | tee -a $seqres.full
+
+ echo "# umount a too-long name" >>$seqres.full
+ $UMOUNT_PROG $longname >>$seqres.full 2>&1
+ _scratch_unmount 2>&1 | tee -a $seqres.full
+}
+
+mount_nonexistent_mnt
+mount_free_loopdev
+mount_wrong_fstype
+
+umount_symlink_device
+umount_toolong_name
+
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/readonly/001.out b/tests/readonly/001.out
new file mode 100644
index 00000000..88678b8e
--- /dev/null
+++ b/tests/readonly/001.out
@@ -0,0 +1,2 @@
+QA output created by 001
+Silence is golden
diff --git a/tests/readonly/Makefile b/tests/readonly/Makefile
new file mode 100644
index 00000000..b9a2b641
--- /dev/null
+++ b/tests/readonly/Makefile
@@ -0,0 +1,20 @@
+#
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+
+TOPDIR = ../..
+include $(TOPDIR)/include/builddefs
+
+READONLY_DIR = readonly
+TARGET_DIR = $(PKG_LIB_DIR)/$(TESTS_DIR)/$(READONLY_DIR)
+
+include $(BUILDRULES)
+
+install:
+ $(INSTALL) -m 755 -d $(TARGET_DIR)
+ $(INSTALL) -m 755 $(TESTS) $(TARGET_DIR)
+ $(INSTALL) -m 644 group $(TARGET_DIR)
+ $(INSTALL) -m 644 $(OUTFILES) $(TARGET_DIR)
+
+# Nothing.
+install-dev install-lib:
diff --git a/tests/readonly/group b/tests/readonly/group
new file mode 100644
index 00000000..dc21c93d
--- /dev/null
+++ b/tests/readonly/group
@@ -0,0 +1,6 @@
+# QA groups control file
+# Defines test groups and nominal group owners
+# - do not start group names with a digit
+# - comment line before each group is "new" description
+#
+001 auto
--
2.16.2.dirty
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 3/6] squashfs: add metadata test
2019-01-22 3:24 [PATCH 0/6] squashfs: introduce squashfs support zhengbin
2019-01-22 3:24 ` [PATCH 1/6] squashfs: add " zhengbin
2019-01-22 3:24 ` [PATCH 2/6] squashfs: add mount test zhengbin
@ 2019-01-22 3:24 ` zhengbin
2019-01-22 3:24 ` [PATCH 4/6] squashfs: add data test zhengbin
` (4 subsequent siblings)
7 siblings, 0 replies; 16+ messages in thread
From: zhengbin @ 2019-01-22 3:24 UTC (permalink / raw)
To: david, guaneryu, fstests; +Cc: houtao1, zhaohongjiang, zhengbin13
This patch add metadata test(atime, uid, gid, file mode,
file type, lock, soft link, hard link).
Signed-off-by: zhengbin <zhengbin13@huawei.com>
---
tests/readonly/002 | 48 ++++++++++++
tests/readonly/002.out | 6 ++
tests/readonly/003 | 72 ++++++++++++++++++
tests/readonly/003.out | 5 ++
tests/readonly/004 | 50 +++++++++++++
tests/readonly/004.out | 3 +
tests/readonly/005 | 77 ++++++++++++++++++++
tests/readonly/005.out | 2 +
tests/readonly/006 | 48 ++++++++++++
tests/readonly/006.out | 4 +
tests/readonly/007 | 74 +++++++++++++++++++
tests/readonly/007.out | 9 +++
tests/readonly/008 | 193 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/readonly/008.out | 34 +++++++++
tests/readonly/009 | 50 +++++++++++++
tests/readonly/009.out | 2 +
tests/readonly/010 | 49 +++++++++++++
tests/readonly/010.out | 4 +
tests/readonly/group | 9 +++
19 files changed, 739 insertions(+)
create mode 100755 tests/readonly/002
create mode 100644 tests/readonly/002.out
create mode 100755 tests/readonly/003
create mode 100644 tests/readonly/003.out
create mode 100755 tests/readonly/004
create mode 100644 tests/readonly/004.out
create mode 100755 tests/readonly/005
create mode 100644 tests/readonly/005.out
create mode 100755 tests/readonly/006
create mode 100644 tests/readonly/006.out
create mode 100755 tests/readonly/007
create mode 100644 tests/readonly/007.out
create mode 100755 tests/readonly/008
create mode 100644 tests/readonly/008.out
create mode 100755 tests/readonly/009
create mode 100644 tests/readonly/009.out
create mode 100755 tests/readonly/010
create mode 100644 tests/readonly/010.out
diff --git a/tests/readonly/002 b/tests/readonly/002
new file mode 100755
index 00000000..eb3824d2
--- /dev/null
+++ b/tests/readonly/002
@@ -0,0 +1,48 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Huawei, Inc. All Rights Reserved.
+#
+# FS QA Test No. 002
+#
+# Test metadata write/soft link/hard link on a RO fs
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/testfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+testfile=$SCRATCH_DEV/testfile
+rm -f $testfile
+touch $testfile
+
+_scratch_mkfs > /dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+testfile=$SCRATCH_MNT/testfile
+
+chown 1 $testfile 2>&1 | _filter_scratch
+chgrp 1 $testfile 2>&1 | _filter_scratch
+chmod 777 $testfile 2>&1 | _filter_scratch
+
+ln -s $testfile $SCRATCH_MNT/linkfile 2>&1 | _filter_scratch
+ln $testfile $SCRATCH_MNT/hardfile 2>&1 | _filter_scratch
+
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/002.out b/tests/readonly/002.out
new file mode 100644
index 00000000..3e5132b2
--- /dev/null
+++ b/tests/readonly/002.out
@@ -0,0 +1,6 @@
+QA output created by 002
+chown: changing ownership of 'SCRATCH_MNT/testfile': Read-only file system
+chgrp: changing group of 'SCRATCH_MNT/testfile': Read-only file system
+chmod: changing permissions of 'SCRATCH_MNT/testfile': Read-only file system
+ln: failed to create symbolic link 'SCRATCH_MNT/linkfile': Read-only file system
+ln: failed to create hard link 'SCRATCH_MNT/hardfile': Read-only file system
diff --git a/tests/readonly/003 b/tests/readonly/003
new file mode 100755
index 00000000..fc9577cc
--- /dev/null
+++ b/tests/readonly/003
@@ -0,0 +1,72 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei, Inc. All Rights Reserved.
+#
+# FS QA Test No. 003. Modifed from generic/192.
+#
+# Simple test of atime
+# - ensure it is persistent after unmount
+# - check atime not updated after cat in readonly fs
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/testfile
+}
+
+_access_time()
+{
+ stat -c %X $1
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_atime
+
+delay=2
+testfile=$SCRATCH_DEV/testfile
+rm -f $testfile
+rm -f $seqres.full
+
+echo test >$testfile
+
+_scratch_mkfs > /dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+testfile=$SCRATCH_MNT/testfile
+
+time1=`_access_time $testfile | tee -a $seqres.full`
+
+echo "sleep for $delay seconds"
+sleep $delay # sleep to allow time to move on for access
+cat $testfile
+time2=`_access_time $testfile | tee -a $seqres.full`
+
+cd /
+_scratch_cycle_mount
+time3=`_access_time $testfile | tee -a $seqres.full`
+
+delta1=`expr $time2 - $time1`
+delta2=`expr $time3 - $time1`
+
+# readonly file system do not update atime
+_within_tolerance "delta1" $delta1 0 0 0 -v
+_within_tolerance "delta2" $delta2 $delta1 0 0 -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/003.out b/tests/readonly/003.out
new file mode 100644
index 00000000..ae2fe728
--- /dev/null
+++ b/tests/readonly/003.out
@@ -0,0 +1,5 @@
+QA output created by 003
+sleep for 2 seconds
+test
+delta1 is in range
+delta2 is in range
diff --git a/tests/readonly/004 b/tests/readonly/004
new file mode 100755
index 00000000..352fbff1
--- /dev/null
+++ b/tests/readonly/004
@@ -0,0 +1,50 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2011 Red Hat, Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei, Inc. All Rights Reserved.
+#
+# FS QA Test No. 004. Modifed from generic/258.
+#
+# Test timestamps prior to epoch
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/timestamp-test.txt
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+TESTFILE=$SCRATCH_DEV/timestamp-test.txt
+
+# Create a file with a timestamp prior to the epoch
+echo "Creating file with timestamp of Jan 1, 1960"
+touch -t 196001010101 $TESTFILE
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+TESTFILE=$SCRATCH_MNT/timestamp-test.txt
+
+# Should yield -315593940 (prior to epoch)
+echo "Testing for negative seconds since epoch"
+ts=`stat -c %X $TESTFILE`
+if [ "$ts" -ge 0 ]; then
+ echo "Timestamp wrapped: $ts"
+ _fail "Timestamp wrapped"
+fi
+
+status=0
+exit
diff --git a/tests/readonly/004.out b/tests/readonly/004.out
new file mode 100644
index 00000000..2935bba1
--- /dev/null
+++ b/tests/readonly/004.out
@@ -0,0 +1,3 @@
+QA output created by 004
+Creating file with timestamp of Jan 1, 1960
+Testing for negative seconds since epoch
diff --git a/tests/readonly/005 b/tests/readonly/005
new file mode 100755
index 00000000..2633a742
--- /dev/null
+++ b/tests/readonly/005
@@ -0,0 +1,77 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 005. Modifed from generic/003.
+#
+# Access time should never be updated in readonly fs, despite the
+# strictatime mount option.
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/file1
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+_stat() {
+ stat -c "%x;%y;%z" $1
+}
+
+_compare_stat_times() {
+ updated=$1 # 3 chars indicating if access, modify and
+ # change times should be updated (Y) or not (N)
+ IFS=';' read -a first_stat <<< "$2" # Convert first stat to array
+ IFS=';' read -a second_stat <<< "$3" # Convert second stat to array
+ test_step=$4 # Will be printed to output stream in case of an
+ # error, to make debugging easier
+ types=( access modify change )
+
+ for i in 0 1 2; do
+ if [ "${first_stat[$i]}" == "${second_stat[$i]}" ]; then
+ if [ "${updated:$i:1}" == "N" ]; then
+ continue;
+ fi
+ echo -n "ERROR: ${types[$i]} time has not been updated "
+ echo $test_step
+ elif [ "${updated:$i:1}" == "N" ]; then
+ echo -n "ERROR: ${types[$i]} time has changed "
+ echo $test_step
+ fi
+ done
+}
+
+rm -f $SCRATCH_DEV/file1
+echo "test" >$SCRATCH_DEV/file1
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount "-o strictatime"
+
+file1_stat_before_first_access=`_stat $SCRATCH_MNT/file1`
+
+sleep 2
+
+cat $SCRATCH_MNT/file1 > /dev/null
+file1_stat_after_first_access=`_stat $SCRATCH_MNT/file1`
+_compare_stat_times NNN "$file1_stat_before_first_access" \
+ "$file1_stat_after_first_access" "for file in read-only filesystem"
+
+# success, all done
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/readonly/005.out b/tests/readonly/005.out
new file mode 100644
index 00000000..a5027f12
--- /dev/null
+++ b/tests/readonly/005.out
@@ -0,0 +1,2 @@
+QA output created by 005
+Silence is golden
diff --git a/tests/readonly/006 b/tests/readonly/006
new file mode 100755
index 00000000..05d2fd09
--- /dev/null
+++ b/tests/readonly/006
@@ -0,0 +1,48 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 006
+#
+# uid/gid/access rights/soft link/hard link test
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/testfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+testfile=$SCRATCH_DEV/testfile
+rm -f $testfile
+
+echo "test" >$testfile
+chown 1 $testfile
+chgrp 2 $testfile
+chmod 421 $testfile
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+testfile=$SCRATCH_MNT/testfile
+stat -c %u $testfile
+stat -c %g $testfile
+stat -c %a $testfile
+
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/006.out b/tests/readonly/006.out
new file mode 100644
index 00000000..9f773e99
--- /dev/null
+++ b/tests/readonly/006.out
@@ -0,0 +1,4 @@
+QA output created by 006
+1
+2
+421
diff --git a/tests/readonly/007 b/tests/readonly/007
new file mode 100755
index 00000000..811b44c6
--- /dev/null
+++ b/tests/readonly/007
@@ -0,0 +1,74 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2016 CTERA Networks. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 007. Modifed from generic/401.
+#
+# Test filetype feature
+#
+# This test does NOT require that file system support the d_type feature.
+# It verifies that file types are reported as either DT_UNKNOWN or as
+# the actual file type. For example, special dir entries . and .. MAY be
+# reported as DT_UNKNOWN IF filetype feature is disabled (ext4), but MAY
+# also be reported as DT_DIR in this case (xfs).
+#
+# For fs for which we know how to test the filetype feature (xfs|ext*)
+# verify getting DT_UNKNOWN IFF feature is disabled.
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $SCRATCH_DEV/find-by-type
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_test_program "t_dir_type"
+
+# Create our test files.
+testdir=$SCRATCH_DEV/find-by-type
+mkdir -p $testdir
+mkdir $testdir/d
+touch $testdir/f
+ln -s $testdir/f $testdir/l
+mknod $testdir/c c 1 1
+mknod $testdir/b b 1 1
+mknod $testdir/p p
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+testdir=$SCRATCH_MNT/find-by-type
+
+# Test d_type of test files - it must be the actual file type on fs
+# with filetype support and it could be either the actual file type
+# or DT_UNKNOWN on fs without filetype support
+ftype=
+src/t_dir_type $SCRATCH_MNT u | wc -l > /dev/null && ftype=1
+src/t_dir_type $testdir | \
+while read name type; do
+ if [ "$ftype" != 1 -a "$type" = u ]; then
+ if [ "$name" = "." -o "$name" = ".." ]; then
+ type=d
+ else
+ type=$name
+ fi
+ fi
+ echo $name $type
+done | sort
+
+status=0
+exit
diff --git a/tests/readonly/007.out b/tests/readonly/007.out
new file mode 100644
index 00000000..798401ed
--- /dev/null
+++ b/tests/readonly/007.out
@@ -0,0 +1,9 @@
+QA output created by 007
+. d
+.. d
+b b
+c c
+d d
+f f
+l l
+p p
diff --git a/tests/readonly/008 b/tests/readonly/008
new file mode 100755
index 00000000..09da3215
--- /dev/null
+++ b/tests/readonly/008
@@ -0,0 +1,193 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2018 Red Hat Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test NO. 008. Modifed from generic/478.
+#
+# Test OFD lock. fcntl F_OFD_SETLK to set lock, then F_OFD_GETLK
+# to verify we are being given correct advice by kernel.
+#
+# OFD lock combines POSIX lock and BSD flock:
+# + does not share between threads
+# + byte granularity
+# (both tested by LTP/fcntl3{4,6})
+# + only release automatically after all open fd closed
+#
+# This test target the third one and expand a little bit.
+#
+# The basic idea is one setlk routine setting locks via fcntl
+# *_SETLK, followed by operations like clone, dup then close fd;
+# another routine getlk getting locks via fcntl *_GETLK.
+#
+# Firstly in setlk routine process P0, place a lock L0 on an
+# opened testfile, then
+#
+# + clone() a child P1 to close the fd then tell getlk to go,
+# parent P0 wait getlk done then close fd.
+# or
+# + dup() fd to a newfd then close newfd then tell getlk to go,
+# then wait getlk done then close fd.
+#
+# In getlk process P2, do fcntl *_GETLK with lock L1 after get
+# notified by setlk routine.
+#
+# In the end, getlk routine check the returned struct flock.l_type
+# to see if the lock mechanism works fine.
+#
+# When testing with clone,
+# + CLONE_FILES set, close releases all locks;
+# + CLONE_FILES not set, locks remain in P0;
+#
+# If L0 is a POSIX lock,
+# + it is not inherited into P1
+# + it is released after dup & close
+#
+# If L0 is a OFD lock,
+# + it is inherited into P1
+# + it is not released after dup & close
+#
+# setlk routine: * getlk routine:
+# start * start
+# | * |
+# open file * open file
+# | * |
+# init sem * |
+# | * |
+# wait init sem done * wait init sem done
+# | * |
+# setlk L0 * |
+# | * |
+# |---------clone()--------| * |
+# | | * |
+# |(child P1) (parent P0)| * | (P2)
+# | | * |
+# | close fd * |
+# | | * |
+# | set sem0=0 * wait sem0==0
+# | | * |
+# | | * getlk L1
+# | | * |
+# wait sem1==0 | * set sem1=0
+# | | * |
+# exit wait child * |
+# | * check result
+# cleanup * |
+# | * |
+# exit * exit
+#
+# We can test combainations of:
+# + shared or exclusive lock
+# + these locks are conflicting or not
+# + one OFD lock and one POSIX lock
+# + that open testfile RDONLY or RDWR
+# + clone with CLONE_FILES or not
+# + dup and close newfd
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/testfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+rm -f $SCRATCH_DEV/testfile
+
+# prepare a 4k testfile in TEST_DIR
+$XFS_IO_PROG -f -c "pwrite -S 0xFF 0 4096" \
+ $SCRATCH_DEV/testfile >> $seqres.full 2>&1
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+do_test()
+{
+ local soptions="$1"
+ local goptions="$2"
+ # print options and getlk output for debug
+ echo $* >> $seqres.full 2>&1
+ # -s : do setlk
+ $here/src/t_ofd_locks $soptions $SCRATCH_MNT/testfile &
+ # -g : do getlk
+ $here/src/t_ofd_locks $goptions $SCRATCH_MNT/testfile | \
+ tee -a $seqres.full
+ wait $!
+
+ # add -F to clone with CLONE_FILES
+ soptions="$1 -F"
+ # with -F, new locks are always file to place
+ $here/src/t_ofd_locks $soptions $SCRATCH_MNT/testfile &
+ $here/src/t_ofd_locks $goptions $SCRATCH_MNT/testfile | \
+ tee -a $seqres.full
+ wait $!
+
+ # add -d to dup and close
+ soptions="$1 -d"
+ $here/src/t_ofd_locks $soptions $SCRATCH_MNT/testfile &
+ $here/src/t_ofd_locks $goptions $SCRATCH_MNT/testfile | \
+ tee -a $seqres.full
+ wait $!
+}
+
+# Always setlk at range [0,9], getlk at range [0,9] [5,24] or [20,29].
+# To open file RDONLY should not break the locks.
+# POSIX locks should be released after closed fd, so it wont conflict
+# with other locks in tests
+
+# -P : operate posix lock
+# -w : operate on F_WRLCK
+# -r : operate on F_RDLCK
+# -R : open file RDONLY
+# -W : open file RDWR
+# -o : file offset where the lock starts
+# -l : lock length
+# -F : clone with CLONE_FILES in setlk
+# -d : dup and close in setlk
+
+# setlk rdlck [0,9], getlk wrlck [0,9], open RDONLY
+do_test "-s -r -o 0 -l 10 -R" "-g -w -o 0 -l 10 -R" "rdlck" "unlck" "rdlck"
+# setlk rdlck [0,9], getlk wrlck [5,24], open RDONLY
+do_test "-s -r -o 0 -l 10 -R" "-g -w -o 5 -l 20 -R -P" "rdlck" "unlck" "rdlck"
+# setlk posix rdlck [0,9], getlk wrlck [5,24], open RDONLY
+do_test "-s -r -o 0 -l 10 -R -P" "-g -w -o 5 -l 20 -R" "rdlck" "unlck" "unlck"
+# setlk rdlck [0,9], getlk wrlck [20,29], open RDONLY
+do_test "-s -r -o 0 -l 10 -R" "-g -w -o 20 -l 10 -R" "unlck" "unlck" "unlck"
+# setlk posix rdlck [0,9], getlk wrlck [20,29], open RDONLY
+do_test "-s -r -o 0 -l 10 -R -P" "-g -w -o 20 -l 10 -R" "unlck" "unlck" "unlck"
+
+# setlk rdlck [0,9], getlk rdlck [0,9], open RDONLY
+do_test "-s -r -o 0 -l 10 -R" "-g -r -o 0 -l 10 -R" "unlck" "unlck" "unlck"
+# setlk rdlck [0,9], getlk posix rdlck [0,9], open RDONLY
+do_test "-s -r -o 0 -l 10 -R" "-g -r -o 0 -l 10 -R -P" "unlck" "unlck" "unlck"
+# setlk posix rdlck [0,9], getlk rdlck [0,9], open RDONLY
+do_test "-s -r -o 0 -l 10 -R -P" "-g -r -o 0 -l 10 -R" "unlck" "unlck" "unlck"
+
+# setlk rdlck [0,9], getlk rdlck [20,29], open RDONLY
+do_test "-s -r -o 0 -l 10 -R" "-g -r -o 20 -l 10 -R" "unlck" "unlck" "unlck"
+# setlk rdlck [0,9], getlk posix rdlck [20,29], open RDONLY
+do_test "-s -r -o 0 -l 10 -R" "-g -r -o 20 -l 10 -R -P" "unlck" "unlck" "unlck"
+# setlk posix rdlck [0,9], getlk rdlck [20,29], open RDONLY
+do_test "-s -r -o 0 -l 10 -R -P" "-g -r -o 20 -l 10 -R" "unlck" "unlck" "unlck"
+
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/008.out b/tests/readonly/008.out
new file mode 100644
index 00000000..d3ac560f
--- /dev/null
+++ b/tests/readonly/008.out
@@ -0,0 +1,34 @@
+QA output created by 008
+get rdlck
+lock could be placed
+get rdlck
+get rdlck
+lock could be placed
+get rdlck
+get rdlck
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
+lock could be placed
diff --git a/tests/readonly/009 b/tests/readonly/009
new file mode 100755
index 00000000..215fd136
--- /dev/null
+++ b/tests/readonly/009
@@ -0,0 +1,50 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2018 RedHat Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test NO. 009. Modifed from generic/504.
+#
+# flock test(shared lock, exclusive lock)
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/flock_testfile_$seq
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_command "$FLOCK_PROG" "flock"
+
+testfile=$SCRATCH_DEV/flock_testfile_$seq
+rm -f $testfile
+touch $testfile
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+testfile=$SCRATCH_MNT/flock_testfile_$seq
+
+# test shared lock
+flock -sn $testfile -c "echo 'test' > /dev/null"
+
+# test exclusive lockflock
+flock -xn $testfile -c "echo 'test' > /dev/null"
+
+# success, all done
+status=0
+echo "Silence is golden"
+exit
diff --git a/tests/readonly/009.out b/tests/readonly/009.out
new file mode 100644
index 00000000..7e977155
--- /dev/null
+++ b/tests/readonly/009.out
@@ -0,0 +1,2 @@
+QA output created by 009
+Silence is golden
diff --git a/tests/readonly/010 b/tests/readonly/010
new file mode 100755
index 00000000..9821cec0
--- /dev/null
+++ b/tests/readonly/010
@@ -0,0 +1,49 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 010
+#
+# soft link/hard link test
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/testfile
+ rm -f $SCRATCH_DEV/hardlink
+ rm -f $SCRATCH_DEV/softlink
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+testfile=$SCRATCH_DEV/testfile
+rm -f $testfile
+
+echo "test" >$testfile
+ln -s $testfile $SCRATCH_DEV/softlink
+ln $testfile $SCRATCH_DEV/hardlink
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+testfile=$SCRATCH_MNT/testfile
+cat $SCRATCH_MNT/softlink
+cat $SCRATCH_MNT/hardlink
+stat -c %h $testfile
+
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/010.out b/tests/readonly/010.out
new file mode 100644
index 00000000..c40989d5
--- /dev/null
+++ b/tests/readonly/010.out
@@ -0,0 +1,4 @@
+QA output created by 010
+test
+test
+2
diff --git a/tests/readonly/group b/tests/readonly/group
index dc21c93d..f87b1fc3 100644
--- a/tests/readonly/group
+++ b/tests/readonly/group
@@ -4,3 +4,12 @@
# - comment line before each group is "new" description
#
001 auto
+002 auto
+003 auto
+004 auto
+005 auto
+006 auto
+007 auto
+008 auto
+009 auto
+010 auto
--
2.16.2.dirty
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 4/6] squashfs: add data test
2019-01-22 3:24 [PATCH 0/6] squashfs: introduce squashfs support zhengbin
` (2 preceding siblings ...)
2019-01-22 3:24 ` [PATCH 3/6] squashfs: add metadata test zhengbin
@ 2019-01-22 3:24 ` zhengbin
2019-01-22 3:24 ` [PATCH 5/6] squashfs: add xattr test zhengbin
` (3 subsequent siblings)
7 siblings, 0 replies; 16+ messages in thread
From: zhengbin @ 2019-01-22 3:24 UTC (permalink / raw)
To: david, guaneryu, fstests; +Cc: houtao1, zhaohongjiang, zhengbin13
This patch add data test(write, mmap read, aio read, buffer read,
direct read, dir read, ls). Readonly/015 is modified from
generic/210, but it does not test direct read(squashfs does not
support this), so I add a new file(aio-subblock-eof-read.c).
Signed-off-by: zhengbin <zhengbin13@huawei.com>
---
.gitignore | 1 +
src/aio-dio-regress/aio-subblock-eof-read.c | 84 ++++++++++++++++
tests/readonly/011 | 92 ++++++++++++++++++
tests/readonly/011.out | 30 ++++++
tests/readonly/012 | 56 +++++++++++
tests/readonly/012.out | 5 +
tests/readonly/013 | 47 +++++++++
tests/readonly/013.out | 2 +
tests/readonly/014 | 46 +++++++++
tests/readonly/014.out | 2 +
tests/readonly/015 | 42 ++++++++
tests/readonly/015.out | 2 +
tests/readonly/016 | 145 ++++++++++++++++++++++++++++
tests/readonly/016.out | 8 ++
tests/readonly/017 | 107 ++++++++++++++++++++
tests/readonly/017.out | 2 +
tests/readonly/018 | 49 ++++++++++
tests/readonly/018.out | 2 +
tests/readonly/group | 8 ++
19 files changed, 730 insertions(+)
create mode 100644 src/aio-dio-regress/aio-subblock-eof-read.c
create mode 100755 tests/readonly/011
create mode 100644 tests/readonly/011.out
create mode 100755 tests/readonly/012
create mode 100644 tests/readonly/012.out
create mode 100755 tests/readonly/013
create mode 100644 tests/readonly/013.out
create mode 100755 tests/readonly/014
create mode 100644 tests/readonly/014.out
create mode 100755 tests/readonly/015
create mode 100644 tests/readonly/015.out
create mode 100755 tests/readonly/016
create mode 100644 tests/readonly/016.out
create mode 100755 tests/readonly/017
create mode 100644 tests/readonly/017.out
create mode 100755 tests/readonly/018
create mode 100644 tests/readonly/018.out
diff --git a/.gitignore b/.gitignore
index ea1aac8a..d9886427 100644
--- a/.gitignore
+++ b/.gitignore
@@ -159,6 +159,7 @@
/src/aio-dio-regress/aio-dio-hole-filling-race
/src/aio-dio-regress/aio-dio-invalidate-failure
/src/aio-dio-regress/aio-dio-invalidate-readahead
+/src/aio-dio-regress/aio-subblock-eof-read
/src/aio-dio-regress/aio-dio-subblock-eof-read
/src/aio-dio-regress/aio-free-ring-with-bogus-nr-pages
/src/aio-dio-regress/aio-io-setup-with-nonwritable-context-pointer
diff --git a/src/aio-dio-regress/aio-subblock-eof-read.c b/src/aio-dio-regress/aio-subblock-eof-read.c
new file mode 100644
index 00000000..24f03f93
--- /dev/null
+++ b/src/aio-dio-regress/aio-subblock-eof-read.c
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ * Copyright (C) 2005 Jeff Moyer
+ * Copyright (C) 2019 zhengbin
+ *
+ * Test AIO read of last block of file
+ *
+ * Code taken from aio-dio-subblock-eof-read.c
+ * Munged by zhengbin
+ *
+ * Description: This source code implements a test to ensure that an AIO
+ * read of the last block in a file opened with returns the proper
+ * amount of data.
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <libaio.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <errno.h>
+
+#define fail(fmt, args...) \
+do { \
+ printf(fmt, ##args); \
+ exit(1); \
+} while (0)
+
+static unsigned char buffer[4096] __attribute((aligned(4096)));
+
+int main(int argc, char **argv)
+{
+ int ret;
+ int fd;
+ int filesize;
+ const char *filename;
+ struct iocb myiocb;
+ struct iocb *cb = &myiocb;
+ io_context_t ioctx;
+ struct io_event ie;
+
+ if (argc != 3)
+ fail("Usage: %s filename filesize\n", argv[0]);
+
+ filename = argv[1];
+ fd = open(filename, O_RDONLY, 0600);
+ if (fd < 0)
+ fail("open returned error %d\n", errno);
+
+ filesize = atoi(argv[2]);
+
+ /* <1> use normal disk read, this should be ok */
+ ret = read(fd, buffer, 4096);
+ if (ret != filesize)
+ fail("buffered read returned %d, should be 300\n", ret);
+
+ /* <2> use AIO disk read, it sees error. */
+ memset(&myiocb, 0, sizeof(myiocb));
+ cb->data = 0;
+ cb->key = 0;
+ cb->aio_lio_opcode = IO_CMD_PREAD;
+ cb->aio_reqprio = 0;
+ cb->aio_fildes = fd;
+ cb->u.c.buf = buffer;
+ cb->u.c.nbytes = 4096;
+ cb->u.c.offset = 0;
+
+ ret = io_queue_init(1, &ioctx);
+ if (ret != 0)
+ fail("io_queue_init returned error %d\n", ret);
+
+ ret = io_submit(ioctx, 1, &cb);
+ if (ret != 1)
+ fail("io_submit returned error %d\n", ret);
+
+ ret = io_getevents(ioctx, 1, 1, &ie, NULL);
+ if (ret != 1)
+ fail("io_getevents returned %d\n", ret);
+
+ if (ie.res != filesize)
+ fail("AIO read of last block in file returned %ld bytes, "
+ "expected %d\n", ie.res, filesize);
+
+ printf("AIO read of last block in file succeeded.\n");
+ return 0;
+}
diff --git a/tests/readonly/011 b/tests/readonly/011
new file mode 100755
index 00000000..186d32a9
--- /dev/null
+++ b/tests/readonly/011
@@ -0,0 +1,92 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei, Inc. All Rights Reserved.
+#
+# FS QA Test No. 011. Modifed from generic/306.
+#
+# Test Write, RW open on a RO fs
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ umount $BINDFILE
+ cd /
+ rm -rf $SCRATCH_DEV/$seq.test
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+THIS_TEST_DIR=$SCRATCH_DEV/$seq.test
+rm -rf $THIS_TEST_DIR
+mkdir $THIS_TEST_DIR || _fail "Could not create dir for test"
+
+DEVNULL=$THIS_TEST_DIR/devnull
+DEVZERO=$THIS_TEST_DIR/devzero
+SYMLINK=$THIS_TEST_DIR/symlink
+BINDFILE=$THIS_TEST_DIR/bindfile
+TARGET=$THIS_TEST_DIR/target
+
+mknod $DEVNULL c 1 3 || _fail "Could not create devnull device"
+mknod $DEVZERO c 1 5 || _fail "Could not create devzero device"
+touch $BINDFILE || _fail "Could not create bind mount file"
+touch $TARGET || _fail "Could not create symlink target"
+ln -s $TARGET $SYMLINK
+touch $THIS_TEST_DIR/testfile
+
+_scratch_mkfs > /dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+THIS_TEST_DIR=$SCRATCH_MNT/$seq.test
+DEVNULL=$THIS_TEST_DIR/devnull
+DEVZERO=$THIS_TEST_DIR/devzero
+SYMLINK=$THIS_TEST_DIR/symlink
+BINDFILE=$THIS_TEST_DIR/bindfile
+TESTFILE=$THIS_TEST_DIR/testfile
+
+# We should be able to read & write to/from these devices even on an RO fs
+echo "== try to create new file"
+touch $THIS_TEST_DIR/this_should_fail 2>&1 | _filter_scratch
+echo "== try to do write operation to testfile"
+cp $TESTFILE $THIS_TEST_DIR/newfile 2>&1 | _filter_scratch
+truncate -s 300 $TESTFILE 2>&1 | _filter_scratch
+echo "== try to make new dir"
+mkdir -p $THIS_TEST_DIR/newdir 2>&1 | _filter_scratch
+echo "== pwrite to null device"
+$XFS_IO_PROG -c "pwrite 0 512" $DEVNULL | _filter_xfs_io
+echo "== pread from zero device"
+$XFS_IO_PROG -c "pread 0 512" $DEVZERO | _filter_xfs_io
+
+echo "== truncating write to null device"
+echo foo > $DEVNULL 2>&1 | _filter_scratch
+echo "== appending write to null device"
+echo foo >> $DEVNULL 2>&1 | _filter_scratch
+
+echo "== writing to symlink from ro fs to rw fs"
+# Various combinations of O_CREAT & O_TRUNC
+$XFS_IO_PROG -c "pwrite 0 512" $SYMLINK | _filter_xfs_io
+$XFS_IO_PROG -f -c "pwrite 0 512" $SYMLINK | _filter_xfs_io
+$XFS_IO_PROG -t -c "pwrite 0 512" $SYMLINK | _filter_xfs_io
+
+echo "== write to bind-mounted rw file on ro fs"
+mount --bind $TARGET $BINDFILE
+# with and without -f (adds O_CREAT)
+$XFS_IO_PROG -c "pwrite 0 512" $BINDFILE | _filter_xfs_io
+$XFS_IO_PROG -f -c "pwrite 0 512" $BINDFILE | _filter_xfs_io
+$XFS_IO_PROG -t -c "pwrite 0 512" $BINDFILE | _filter_xfs_io
+
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/011.out b/tests/readonly/011.out
new file mode 100644
index 00000000..1987f7ef
--- /dev/null
+++ b/tests/readonly/011.out
@@ -0,0 +1,30 @@
+QA output created by 011
+== try to create new file
+touch: cannot touch 'SCRATCH_MNT/011.test/this_should_fail': Read-only file system
+== try to do write operation to testfile
+cp: cannot create regular file 'SCRATCH_MNT/011.test/newfile': Read-only file system
+truncate: cannot open 'SCRATCH_MNT/011.test/testfile' for writing: Read-only file system
+== try to make new dir
+mkdir: cannot create directory 'SCRATCH_MNT/011.test/newdir': Read-only file system
+== pwrite to null device
+wrote 512/512 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+== pread from zero device
+read 512/512 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+== truncating write to null device
+== appending write to null device
+== writing to symlink from ro fs to rw fs
+wrote 512/512 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 512/512 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 512/512 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+== write to bind-mounted rw file on ro fs
+wrote 512/512 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 512/512 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 512/512 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/readonly/012 b/tests/readonly/012
new file mode 100755
index 00000000..8263d721
--- /dev/null
+++ b/tests/readonly/012
@@ -0,0 +1,56 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2012 Red Hat, Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei, Inc. All Rights Reserved.
+#
+# FS QA Test No. 012. Modifed from generic/294.
+#
+# Tests for EEXIST (not EROFS) for inode creations, if
+# we ask to create an already-existing entity on an RO filesystem
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $SCRATCH_DEV/$seq.test
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+THIS_TEST_DIR=$SCRATCH_DEV/$seq.test
+
+_create_files()
+{
+ mknod $THIS_TEST_DIR/testnode c 1 3 2>&1 | _filter_mknod
+ mkdir $THIS_TEST_DIR/testdir
+ touch $THIS_TEST_DIR/testtarget
+ ln -s $THIS_TEST_DIR/testtarget $THIS_TEST_DIR/testlink 2>&1 | _filter_ln
+}
+
+rm -rf $THIS_TEST_DIR
+mkdir $THIS_TEST_DIR || _fail "Could not create dir for test"
+
+_create_files 2>&1 | _filter_scratch
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+THIS_TEST_DIR=$SCRATCH_MNT/$seq.test
+
+_create_files 2>&1 | _filter_scratch
+
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/012.out b/tests/readonly/012.out
new file mode 100644
index 00000000..f088f97d
--- /dev/null
+++ b/tests/readonly/012.out
@@ -0,0 +1,5 @@
+QA output created by 012
+mknod: SCRATCH_MNT/012.test/testnode: File exists
+mkdir: cannot create directory 'SCRATCH_MNT/012.test/testdir': File exists
+touch: cannot touch 'SCRATCH_MNT/012.test/testtarget': Read-only file system
+ln: creating symbolic link 'SCRATCH_MNT/012.test/testlink': File exists
diff --git a/tests/readonly/013 b/tests/readonly/013
new file mode 100755
index 00000000..701c9114
--- /dev/null
+++ b/tests/readonly/013
@@ -0,0 +1,47 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 013
+#
+# little file test
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $THIS_TEST_DIR
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+iter=100
+THIS_TEST_DIR=$SCRATCH_DEV/testdir
+
+rm -rf $THIS_TEST_DIR
+mkdir -p $THIS_TEST_DIR
+
+for ((count=1;${count}<=${iter};count++)); do
+ dd if=/dev/urandom of=$THIS_TEST_DIR/file-$count bs=1K count=1K > /dev/null 2>&1
+done
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+diff -r $THIS_TEST_DIR $SCRATCH_MNT/testdir
+
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/readonly/013.out b/tests/readonly/013.out
new file mode 100644
index 00000000..3e66423b
--- /dev/null
+++ b/tests/readonly/013.out
@@ -0,0 +1,2 @@
+QA output created by 013
+Silence is golden
diff --git a/tests/readonly/014 b/tests/readonly/014
new file mode 100755
index 00000000..e0e6f051
--- /dev/null
+++ b/tests/readonly/014
@@ -0,0 +1,46 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2006 Silicon Graphics, Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei, Inc. All Rights Reserved.
+#
+# FSQA Test No. 014. Modifed from generic/141.
+#
+# Test for xfs_io mmap read problem
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/mmap
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+# create file
+file=$SCRATCH_DEV/mmap
+rm -f $file
+$XFS_IO_PROG -f -c "pwrite 0 1024k" $file > /dev/null
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+file=$SCRATCH_MNT/mmap
+
+# mmap a region and mmap read it
+$XFS_IO_PROG -r -c "mmap -r 64k 64k" -c "mread -r" $file > /dev/null
+
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/readonly/014.out b/tests/readonly/014.out
new file mode 100644
index 00000000..db5250b9
--- /dev/null
+++ b/tests/readonly/014.out
@@ -0,0 +1,2 @@
+QA output created by 014
+Silence is golden
diff --git a/tests/readonly/015 b/tests/readonly/015
new file mode 100755
index 00000000..1b4885d3
--- /dev/null
+++ b/tests/readonly/015
@@ -0,0 +1,42 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2009 Eric Sandeen. All Rights Reserved.
+# Copyright (c) 2019 Huawei, Inc. All Rights Reserved.
+#
+# FS QA Test No. 015. Modifed from generic/210.
+#
+# Run aio-subblock-eof-read - test AIO read of last block of file
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/aio-test-file
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+file=$SCRATCH_DEV/aio-test-file
+rm -f $file
+truncate -s 300 $file
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+file=$SCRATCH_MNT/aio-test-file
+src/aio-dio-regress/aio-subblock-eof-read $file 300
+
+status=0
+exit
diff --git a/tests/readonly/015.out b/tests/readonly/015.out
new file mode 100644
index 00000000..47de4ebf
--- /dev/null
+++ b/tests/readonly/015.out
@@ -0,0 +1,2 @@
+QA output created by 015
+AIO read of last block in file succeeded.
diff --git a/tests/readonly/016 b/tests/readonly/016
new file mode 100755
index 00000000..c7d44fd3
--- /dev/null
+++ b/tests/readonly/016
@@ -0,0 +1,145 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2017 Red Hat, Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 016. Modifed from generic/450.
+#
+# Test read around EOF. If the file offset is at or past the end of file,
+# no bytes are read, and read() returns zero.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/testfile_${seq}
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+tfile=$SCRATCH_DEV/testfile_${seq}
+rm -f $tfile
+
+# ssize: sector size
+# bsize: block size
+ssize=512
+bsize=4096
+asize=$((bsize * 2))
+tsize=$((asize - ssize * 2))
+
+$XFS_IO_PROG -ft -c "pwrite 0 ${tsize}" -c "fsync" $tfile >>$seqres.full
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+tfile=$SCRATCH_MNT/testfile_${seq}
+
+# check xfs_io pread result, especially for
+# Param1: expected pread offset
+# Param2: expected pread count
+# Param3: expected pread return
+#
+# If any of above values are not as expected, the output keeps
+# using the real value
+check_xfs_io_read()
+{
+ OFFSET=$1
+ COUNT=$2
+ RETURN=$3
+
+ $AWK_PROG -v ret="$RETURN" -v cnt="$COUNT" -v off="$OFFSET" '
+ /read/{
+ split($2, bytes, "/")
+
+ retval=bytes[1]
+ count=bytes[2]
+ offset=$NF
+
+ if(retval != ret || count != cnt || offset != off)
+ printf("expect [%s,%s,%s], got [%s,%s,%s]\n", \
+ off, cnt, ret, offset, count, retval)
+
+ next
+ }
+ '
+}
+
+# +-------------------------------------------------------+
+# | block | block |
+# +-------------------------------------------------------+
+# | sect | sect | sect | sect | sect | sect | sect | sect |
+# |
+# EOF
+# |<--------------- move EOF -------------->| xxxxxxxxxxx |
+# [pread1]
+# [ pread2 ]
+# [pread3]
+# [pread4] ... [pread5]
+#
+# Run below steps with different $operation and $openflag
+#
+# 1) write 2 blocks (6 sectors) data to move EOF to the penultimate sector
+# 2) read (pread1) the first sector within EOF
+# 3) read (pread2) the second block contain EOF
+# 4) read (pread3) a sector at (after) EOF
+# 5) read (pread4) the last sector past EOF
+# 6) read (pread5) at far away from EOF
+#
+read_test()
+{
+ local of="$1"
+ local op="buffer read"
+
+ if [ "$of" != "" ]; then
+ op="direct read"
+ fi
+
+ echo "$op the first sector within EOF"
+ $XFS_IO_PROG $of -r -c "pread 0 $ssize" $tfile | \
+ check_xfs_io_read 0 "$ssize" "$ssize"
+
+ echo "$op the second block contains EOF"
+ $XFS_IO_PROG $of -r -c "pread $bsize $bsize" $tfile | \
+ check_xfs_io_read "$bsize" "$bsize" "$((tsize - bsize))"
+
+ echo "$op a sector at (after) EOF"
+ $XFS_IO_PROG $of -r -c "pread $tsize $ssize" $tfile | \
+ check_xfs_io_read "$tsize" "$ssize" "0"
+
+ echo "$op the last sector past EOF"
+ $XFS_IO_PROG $of -r -c "pread $((tsize + ssize)) $ssize" $tfile | \
+ check_xfs_io_read "$((tsize + ssize))" "$ssize" "0"
+
+ echo "$op at far away from EOF"
+ $XFS_IO_PROG $of -r -c "pread $((bsize * 100)) $ssize" $tfile | \
+ check_xfs_io_read "$((bsize * 100))" "$ssize" "0"
+}
+
+# Test buffer I/O read
+read_test
+
+# Test direct I/O read(not support)
+rm -f $seqres.full
+echo "direct read the first sector within EOF"
+$XFS_IO_PROG -d -r -c "pread $tsize $ssize" $tfile >>$seqres.full 2>&1
+cat $seqres.full | _filter_scratch
+
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/016.out b/tests/readonly/016.out
new file mode 100644
index 00000000..57eecd9c
--- /dev/null
+++ b/tests/readonly/016.out
@@ -0,0 +1,8 @@
+QA output created by 016
+buffer read the first sector within EOF
+buffer read the second block contains EOF
+buffer read a sector at (after) EOF
+buffer read the last sector past EOF
+buffer read at far away from EOF
+direct read the first sector within EOF
+SCRATCH_MNT/testfile_016: Invalid argument
diff --git a/tests/readonly/017 b/tests/readonly/017
new file mode 100755
index 00000000..f5ac2b92
--- /dev/null
+++ b/tests/readonly/017
@@ -0,0 +1,107 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2013 Huawei. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 017. Modifed from generic/310.
+#
+# Check if there are two threads,one keeps calling read() or lseek(), and
+# the other calling readdir(), both on the same directory fd.
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $SCRATCH_DEV/$seq
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_command "$KILLALL_PROG" killall
+
+dmesg -c > /dev/null
+
+nr_bug=`dmesg | grep -c "kernel BUG"`
+nr_error=`dmesg | grep -c "error"`
+nr_null=`dmesg | grep -c "kernel NULL pointer dereference"`
+nr_warning=`dmesg | grep -c "^WARNING"`
+nr_lockdep=`dmesg | grep -c "possible recursive locking detected"`
+
+#check if some kind of kernel bug happened
+check_kernel_bug()
+{
+ new_bug=`dmesg | grep -c "kernel BUG"`
+ new_error=`dmesg | grep -c "error"`
+ new_null=`dmesg | grep -c "kernel NULL pointer dereference"`
+ new_warning=`dmesg | grep -c "^WARNING"`
+ new_lockdep=`dmesg | grep -c "possible recursive locking detected"`
+
+ # no kernel bug is detected
+ if [ $new_bug -eq $nr_bug -a $new_error -eq $nr_error -a \
+ $new_null -eq $nr_null -a $new_warning -eq $nr_warning -a \
+ $new_lockdep -eq $nr_lockdep ]; then
+ return 0
+ fi
+
+ nr_bug=$new_bug
+ nr_error=$new_error
+ nr_null=$new_null
+ nr_warning=$new_warning
+ nr_lockdep=$new_lockdep
+ return 1
+}
+
+RUN_TIME=$((30 * $TIME_FACTOR))
+
+SEQ_DIR=$SCRATCH_DEV/$seq
+rm -rf $SEQ_DIR
+mkdir -p $SEQ_DIR
+for n in {1..4096}; do
+ touch $SEQ_DIR/$n
+done
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+SEQ_DIR=$SCRATCH_MNT/$seq
+
+_test_read()
+{
+ src/t_readdir_1 $SEQ_DIR &
+ sleep $RUN_TIME
+ $KILLALL_PROG t_readdir_1
+ check_kernel_bug
+ if [ $? -ne 0 ]; then
+ _fatal "kernel bug detected, check dmesg for more information."
+ fi
+}
+
+_test_lseek()
+{
+ src/t_readdir_2 $SEQ_DIR &
+ sleep $RUN_TIME
+ $KILLALL_PROG t_readdir_2
+ check_kernel_bug
+ if [ $? -ne 0 ]; then
+ _fatal "kernel bug detected, check dmesg for more information."
+ fi
+}
+
+_test_read
+_test_lseek
+
+# success, all done
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/readonly/017.out b/tests/readonly/017.out
new file mode 100644
index 00000000..82228448
--- /dev/null
+++ b/tests/readonly/017.out
@@ -0,0 +1,2 @@
+QA output created by 017
+Silence is golden
diff --git a/tests/readonly/018 b/tests/readonly/018
new file mode 100755
index 00000000..40bee5e8
--- /dev/null
+++ b/tests/readonly/018
@@ -0,0 +1,49 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2017 Intel Corporation. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test NO. 018. Modifed from generic/452.
+#
+# This is a regression test for kernel patch:(ls test)
+# commit 42d4a99b09cb ("ext4: fix fault handling when mounted with -o dax,ro")
+# created by Ross Zwisler <ross.zwisler@linux.intel.com>
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/ls_on_scratch
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+# we need to be able to execute binaries on scratch
+_exclude_scratch_mount_option "noexec"
+
+LS=$(which ls --skip-alias --skip-functions)
+SCRATCH_LS=$SCRATCH_DEV/ls_on_scratch
+cp $LS $SCRATCH_LS
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+SCRATCH_LS=$SCRATCH_MNT/ls_on_scratch
+
+$SCRATCH_LS $SCRATCH_LS | _filter_scratch
+
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/018.out b/tests/readonly/018.out
new file mode 100644
index 00000000..f608c03d
--- /dev/null
+++ b/tests/readonly/018.out
@@ -0,0 +1,2 @@
+QA output created by 018
+SCRATCH_MNT/ls_on_scratch
diff --git a/tests/readonly/group b/tests/readonly/group
index f87b1fc3..c5bca62c 100644
--- a/tests/readonly/group
+++ b/tests/readonly/group
@@ -13,3 +13,11 @@
008 auto
009 auto
010 auto
+011 auto
+012 auto
+013 auto
+014 auto
+015 auto
+016 auto
+017 auto
+018 auto
--
2.16.2.dirty
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 5/6] squashfs: add xattr test
2019-01-22 3:24 [PATCH 0/6] squashfs: introduce squashfs support zhengbin
` (3 preceding siblings ...)
2019-01-22 3:24 ` [PATCH 4/6] squashfs: add data test zhengbin
@ 2019-01-22 3:24 ` zhengbin
2019-01-22 3:24 ` [PATCH 6/6] squashfs: add mksquashfs options test zhengbin
` (2 subsequent siblings)
7 siblings, 0 replies; 16+ messages in thread
From: zhengbin @ 2019-01-22 3:24 UTC (permalink / raw)
To: david, guaneryu, fstests; +Cc: houtao1, zhaohongjiang, zhengbin13
This patch add xattr test(set, get, list).
Signed-off-by: zhengbin <zhengbin13@huawei.com>
---
common/attr | 5 +++
tests/readonly/019 | 109 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/readonly/019.out | 45 ++++++++++++++++++++
tests/readonly/020 | 56 +++++++++++++++++++++++++
tests/readonly/020.out | 9 ++++
tests/readonly/021 | 74 +++++++++++++++++++++++++++++++++
tests/readonly/021.out | 11 +++++
tests/readonly/group | 3 ++
8 files changed, 312 insertions(+)
create mode 100755 tests/readonly/019
create mode 100644 tests/readonly/019.out
create mode 100755 tests/readonly/020
create mode 100644 tests/readonly/020.out
create mode 100755 tests/readonly/021
create mode 100644 tests/readonly/021.out
diff --git a/common/attr b/common/attr
index 20049de0..845ed88e 100644
--- a/common/attr
+++ b/common/attr
@@ -179,6 +179,11 @@ _require_attrs()
[ -n "$GETFATTR_PROG" ] || _notrun "getfattr command not found"
[ -n "$SETFATTR_PROG" ] || _notrun "setfattr command not found"
+ if [ "$FSTYP" == "squashfs" ]; then
+ # squashfs is a readonly filesystem, can not touch file
+ return
+ fi
+
#
# Test if chacl is able to write an attribute on the target filesystems.
# On really old kernels the system calls might not be implemented at all,
diff --git a/tests/readonly/019 b/tests/readonly/019
new file mode 100755
index 00000000..69c6c7fd
--- /dev/null
+++ b/tests/readonly/019
@@ -0,0 +1,109 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
+# Copyright (c) 2017 Google, Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 019. Modifed from generic/097.
+#
+# simple attr tests for EAs:
+# - set should return error
+# - get
+# - list
+# Basic testing.
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/fooA
+ rm -f $SCRATCH_DEV/fooB
+ rm -f $SCRATCH_DEV/fooC
+}
+
+getfattr()
+{
+ _getfattr --absolute-names "$@" |& _filter_scratch
+}
+
+setfattr()
+{
+ $SETFATTR_PROG "$@" |& _filter_scratch
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/attr
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+
+_require_scratch
+_require_attrs
+
+file0=$SCRATCH_DEV/foo0
+fileA=$SCRATCH_DEV/fooA
+fileB=$SCRATCH_DEV/fooB
+fileC=$SCRATCH_DEV/fooC
+
+rm -f $file0
+rm -f $fileA
+rm -f $fileB
+rm -f $fileC
+echo -e "\ncreate file fooA"
+touch $fileA
+
+echo -e "\ncreate file fooB"
+touch $fileB
+echo -e "\nset fooB EA <user.noise,woof>:"
+setfattr -n user.noise -v woof $fileB
+
+echo -e "\ncreate file fooC"
+touch $fileC
+echo -e "\nset fooC EA <user.size,small>:"
+setfattr -n user.size -v small $fileC
+echo -e "\nset fooC EA <user.noise,low>:"
+setfattr -n user.noise -v low $fileC
+echo -e "\nset fooC EA <trusted.colour,blue>:"
+setfattr -n trusted.colour -v blue $fileC
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+file0=$SCRATCH_MNT/foo0
+fileA=$SCRATCH_MNT/fooA
+fileB=$SCRATCH_MNT/fooB
+fileC=$SCRATCH_MNT/fooC
+
+echo -e "\nset SCRATCH_MNT fooA EA"
+setfattr -n user.noise -v woof $fileA
+
+echo -e "\nlist non-existent file0 EA"
+getfattr -d $file0
+
+echo -e "\nshould be no EAs for fooA:"
+getfattr -d $fileA
+
+echo -e "\nlist the EAs for fooB: user.noise"
+getfattr -d $fileB
+
+echo -e "\nlist the EAs for fooC: user.size, user.noise"
+getfattr -d $fileC
+
+echo -e "\nget the value of the fooC user.size EA"
+getfattr -n user.size $fileC
+
+echo -e "\nlist fooC trusted EAs"
+getfattr -d -m '^trusted\.' $fileC
+
+echo -e "success"
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/019.out b/tests/readonly/019.out
new file mode 100644
index 00000000..48593890
--- /dev/null
+++ b/tests/readonly/019.out
@@ -0,0 +1,45 @@
+QA output created by 019
+
+create file fooA
+
+create file fooB
+
+set fooB EA <user.noise,woof>:
+
+create file fooC
+
+set fooC EA <user.size,small>:
+
+set fooC EA <user.noise,low>:
+
+set fooC EA <trusted.colour,blue>:
+
+set SCRATCH_MNT fooA EA
+setfattr: SCRATCH_MNT/fooA: Read-only file system
+
+list non-existent file0 EA
+getfattr: SCRATCH_MNT/foo0: No such file or directory
+
+should be no EAs for fooA:
+
+list the EAs for fooB: user.noise
+# file: SCRATCH_MNT/fooB
+user.noise="woof"
+
+
+list the EAs for fooC: user.size, user.noise
+# file: SCRATCH_MNT/fooC
+user.noise="low"
+user.size="small"
+
+
+get the value of the fooC user.size EA
+# file: SCRATCH_MNT/fooC
+user.size="small"
+
+
+list fooC trusted EAs
+# file: SCRATCH_MNT/fooC
+trusted.colour="blue"
+
+success
diff --git a/tests/readonly/020 b/tests/readonly/020
new file mode 100755
index 00000000..c56c4d3f
--- /dev/null
+++ b/tests/readonly/020
@@ -0,0 +1,56 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2016 SUSE Linux Products GmbH. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 020. Modifed from generic/337.
+#
+# Test that the filesystem's implementation of the listxattrs system call lists
+# all the xattrs an inode has.
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/testfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_attrs
+
+rm -f $SCRATCH_DEV/testfile
+touch $SCRATCH_DEV/testfile
+# Create our test file with a few xattrs. The first 3 xattrs have a name that
+# when given as input to a crc32c function result in the same checksum. This
+# made btrfs list only one of the xattrs through listxattrs system call (because
+# it packs xattrs with the same name checksum into the same btree item).
+$SETFATTR_PROG -n user.foobar -v 123 $SCRATCH_DEV/testfile
+$SETFATTR_PROG -n user.WvG1c1Td -v qwerty $SCRATCH_DEV/testfile
+$SETFATTR_PROG -n user.J3__T_Km3dVsW_ -v hello $SCRATCH_DEV/testfile
+$SETFATTR_PROG -n user.something -v pizza $SCRATCH_DEV/testfile
+$SETFATTR_PROG -n user.ping -v pong $SCRATCH_DEV/testfile
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+# Now call getfattr with --dump, which calls the listxattrs system call.
+# It should list all the xattrs we have set before.
+_getfattr --absolute-names --dump $SCRATCH_MNT/testfile | _filter_scratch
+
+echo -e "success"
+# success, all done
+status=0
+exit
diff --git a/tests/readonly/020.out b/tests/readonly/020.out
new file mode 100644
index 00000000..27ca52a9
--- /dev/null
+++ b/tests/readonly/020.out
@@ -0,0 +1,9 @@
+QA output created by 020
+# file: SCRATCH_MNT/testfile
+user.J3__T_Km3dVsW_="hello"
+user.WvG1c1Td="qwerty"
+user.foobar="123"
+user.ping="pong"
+user.something="pizza"
+
+success
diff --git a/tests/readonly/021 b/tests/readonly/021
new file mode 100755
index 00000000..9d46c8e5
--- /dev/null
+++ b/tests/readonly/021
@@ -0,0 +1,74 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2016 Red Hat, Inc. All Rights Reserved.
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 021. Modifed from generic/377.
+#
+# Test listxattr syscall behaviour with different buffer sizes.
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/testfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_attrs
+_require_test_program "listxattr"
+
+listxattr="$here/src/listxattr"
+
+# Create a testfile with three xattrs such that the sum of namelengths of the
+# first two is bigger than the namelength of the third. This is needed for
+# the 5th testcase that tests one of the cornercases.
+testfile=$SCRATCH_DEV/testfile
+rm -f $testfile
+touch $testfile
+$SETFATTR_PROG -n user.foo -v bar $testfile
+$SETFATTR_PROG -n user.ping -v pong $testfile
+$SETFATTR_PROG -n user.hello -v there $testfile
+
+_scratch_mkfs >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+
+testfile=$SCRATCH_MNT/testfile
+
+# 1. Call listxattr without buffer length argument. This should succeed.
+$listxattr $testfile | sort
+
+# 2. Calling listxattr on nonexistant file should fail with -ENOENT.
+$listxattr ""
+
+# 3. Calling listxattr with buffersize not suffecient for even one xattr
+# should fail with -ERANGE.
+$listxattr $testfile 1
+
+# 4. Calling listxattr with buffersize suffecient for one xattr, but not
+# sufficient for the whole list should still fail with -ERANGE.
+$listxattr $testfile 9
+
+# 5. Calling listxattr with buffersize suffecient for the last xattr, but not
+# sufficient for the sum of first two. Should fail with -ERANGE.
+$listxattr $testfile 11
+
+# 6. Calling listxattr with buffersize bigger than needed should succeed.
+$listxattr $testfile 500 | sort
+
+status=0
+exit
diff --git a/tests/readonly/021.out b/tests/readonly/021.out
new file mode 100644
index 00000000..09b2c5ea
--- /dev/null
+++ b/tests/readonly/021.out
@@ -0,0 +1,11 @@
+QA output created by 021
+xattr: user.foo
+xattr: user.hello
+xattr: user.ping
+listxattr: No such file or directory
+listxattr: Numerical result out of range
+listxattr: Numerical result out of range
+listxattr: Numerical result out of range
+xattr: user.foo
+xattr: user.hello
+xattr: user.ping
diff --git a/tests/readonly/group b/tests/readonly/group
index c5bca62c..3953328d 100644
--- a/tests/readonly/group
+++ b/tests/readonly/group
@@ -21,3 +21,6 @@
016 auto
017 auto
018 auto
+019 auto
+020 auto
+021 auto
--
2.16.2.dirty
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 6/6] squashfs: add mksquashfs options test
2019-01-22 3:24 [PATCH 0/6] squashfs: introduce squashfs support zhengbin
` (4 preceding siblings ...)
2019-01-22 3:24 ` [PATCH 5/6] squashfs: add xattr test zhengbin
@ 2019-01-22 3:24 ` zhengbin
2019-01-25 10:49 ` [PATCH 0/6] squashfs: introduce squashfs support zhengbin (A)
2019-02-24 15:39 ` Eryu Guan
7 siblings, 0 replies; 16+ messages in thread
From: zhengbin @ 2019-01-22 3:24 UTC (permalink / raw)
To: david, guaneryu, fstests; +Cc: houtao1, zhaohongjiang, zhengbin13
This patch add mksquashfs options test(compressors, sparse file,
xattr, block size, fragment, compress inode,data,fragment,xattr,
file owner).
Signed-off-by: zhengbin <zhengbin13@huawei.com>
---
tests/squashfs/001 | 60 ++++++++++++++++++++++++++++++++++++++++
tests/squashfs/001.out | 9 ++++++
tests/squashfs/002 | 40 +++++++++++++++++++++++++++
tests/squashfs/002.out | 2 ++
tests/squashfs/003 | 55 +++++++++++++++++++++++++++++++++++++
tests/squashfs/003.out | 12 ++++++++
tests/squashfs/004 | 73 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/squashfs/004.out | 23 ++++++++++++++++
tests/squashfs/005 | 54 ++++++++++++++++++++++++++++++++++++
tests/squashfs/005.out | 13 +++++++++
tests/squashfs/Makefile | 20 ++++++++++++++
tests/squashfs/group | 10 +++++++
12 files changed, 371 insertions(+)
create mode 100755 tests/squashfs/001
create mode 100644 tests/squashfs/001.out
create mode 100755 tests/squashfs/002
create mode 100644 tests/squashfs/002.out
create mode 100755 tests/squashfs/003
create mode 100644 tests/squashfs/003.out
create mode 100755 tests/squashfs/004
create mode 100644 tests/squashfs/004.out
create mode 100755 tests/squashfs/005
create mode 100644 tests/squashfs/005.out
create mode 100644 tests/squashfs/Makefile
create mode 100644 tests/squashfs/group
diff --git a/tests/squashfs/001 b/tests/squashfs/001
new file mode 100755
index 00000000..3f71f122
--- /dev/null
+++ b/tests/squashfs/001
@@ -0,0 +1,60 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 001
+#
+# Compression test
+#
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $THIS_TEST_DIR
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+# rarely use lzma, do not test it
+mcomp=(gzip lz4 lzo xz)
+iter=5
+THIS_TEST_DIR=$SCRATCH_DEV/testdir
+
+rm -rf $THIS_TEST_DIR
+mkdir -p $THIS_TEST_DIR
+
+for ((count=1;${count}<=${iter};count++)); do
+ dd if=/dev/urandom of=$THIS_TEST_DIR/file-$count bs=1K count=1024 > /dev/null 2>&1
+ mkdir -p $THIS_TEST_DIR/dir-$count
+ dd if=/dev/urandom of=$THIS_TEST_DIR/dir-$count/file-$count bs=1K count=1024 > /dev/null 2>&1
+done
+
+# Run tests
+for comp in ${mcomp[*]}; do
+ echo "making squashfs image using $comp compression."
+ _scratch_mkfs "-comp $comp" >/dev/null 2>&1
+ if [ $? != 0 ]; then
+ echo "mksquashfs failed for $comp compression."
+ continue
+ fi
+ echo "Testing mount and diff data."
+ _scratch_mount
+ diff -r $THIS_TEST_DIR $SCRATCH_MNT/testdir
+ _scratch_unmount
+done
+
+status=0
+exit
diff --git a/tests/squashfs/001.out b/tests/squashfs/001.out
new file mode 100644
index 00000000..93cafe6a
--- /dev/null
+++ b/tests/squashfs/001.out
@@ -0,0 +1,9 @@
+QA output created by 001
+making squashfs image using gzip compression.
+Testing mount and diff data.
+making squashfs image using lz4 compression.
+Testing mount and diff data.
+making squashfs image using lzo compression.
+Testing mount and diff data.
+making squashfs image using xz compression.
+Testing mount and diff data.
diff --git a/tests/squashfs/002 b/tests/squashfs/002
new file mode 100755
index 00000000..ae999a38
--- /dev/null
+++ b/tests/squashfs/002
@@ -0,0 +1,40 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 002
+#
+# mksquashfs -no-sparse test, -no-sparse: read all data of sparse files
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/testfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+rm -f $SCRATCH_DEV/testfile
+truncate -s 100M $SCRATCH_DEV/testfile
+
+_scratch_mkfs "-no-sparse" >/dev/null 2>&1 || _fail "Could not mkfs scratch device"
+_scratch_mount
+# If use -no-sparse, du -h will be 100M
+du -h $SCRATCH_MNT/testfile | awk '{print $1}'
+diff -r $SCRATCH_DEV/testfile $SCRATCH_MNT/testfile
+
+status=0
+exit
diff --git a/tests/squashfs/002.out b/tests/squashfs/002.out
new file mode 100644
index 00000000..7ca3f044
--- /dev/null
+++ b/tests/squashfs/002.out
@@ -0,0 +1,2 @@
+QA output created by 002
+100M
diff --git a/tests/squashfs/003 b/tests/squashfs/003
new file mode 100755
index 00000000..4c2ea806
--- /dev/null
+++ b/tests/squashfs/003
@@ -0,0 +1,55 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 003
+#
+# mksquashfs -xattrs, -no-xattrs test
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $SCRATCH_DEV/testfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_attrs
+
+opts=(-xattrs -no-xattrs)
+
+rm -f $SCRATCH_DEV/testfile
+
+touch $SCRATCH_DEV/testfile
+$SETFATTR_PROG -n user.foobar -v 123 $SCRATCH_DEV/testfile
+$SETFATTR_PROG -n user.WvG1c1Td -v qwerty $SCRATCH_DEV/testfile
+$SETFATTR_PROG -n user.J3__T_Km3dVsW_ -v hello $SCRATCH_DEV/testfile
+$SETFATTR_PROG -n user.something -v pizza $SCRATCH_DEV/testfile
+$SETFATTR_PROG -n user.ping -v pong $SCRATCH_DEV/testfile
+
+# Run tests
+for opt in ${opts[*]}; do
+ echo "making squashfs image using $opt"
+ _scratch_mkfs "$opt" >/dev/null 2>&1 || _fail "Could not mkfs scratch device use $opt"
+ _scratch_mount
+ # list all the xattrs we have set before.
+ echo "list all testfile xattr"
+ _getfattr --absolute-names --dump $SCRATCH_MNT/testfile | _filter_scratch
+ _scratch_unmount
+done
+
+status=0
+exit
diff --git a/tests/squashfs/003.out b/tests/squashfs/003.out
new file mode 100644
index 00000000..c55184f8
--- /dev/null
+++ b/tests/squashfs/003.out
@@ -0,0 +1,12 @@
+QA output created by 003
+making squashfs image using -xattrs
+list all testfile xattr
+# file: SCRATCH_MNT/testfile
+user.J3__T_Km3dVsW_="hello"
+user.WvG1c1Td="qwerty"
+user.foobar="123"
+user.ping="pong"
+user.something="pizza"
+
+making squashfs image using -no-xattrs
+list all testfile xattr
diff --git a/tests/squashfs/004 b/tests/squashfs/004
new file mode 100755
index 00000000..bd34b661
--- /dev/null
+++ b/tests/squashfs/004
@@ -0,0 +1,73 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 004
+#
+# mksquashfs -no-fragments -always-use-fragments, -noI -noD -noF -noX, -b test
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $THIS_TEST_DIR
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+mfrag=(-no-fragments -always-use-fragments)
+mcomp=(-noI -noD -noF -noX)
+iter=6
+THIS_TEST_DIR=$SCRATCH_DEV/testdir
+
+rm -rf $THIS_TEST_DIR
+mkdir -p $THIS_TEST_DIR
+
+for ((count=1;${count}<=${iter};count++)); do
+ dd if=/dev/urandom of=$THIS_TEST_DIR/file-$count bs=1M count=1 >/dev/null 2>&1
+ mkdir -p $THIS_TEST_DIR/dir-$count
+ dd if=/dev/urandom of=$THIS_TEST_DIR/dir-$count/file-$count bs=1K count=1 >/dev/null 2>&1
+done
+
+for frag in ${mfrag[*]}; do
+ for comp in ${mcomp[*]}; do
+ echo "making squashfs image using 16384 blocksize, $frag, $comp"
+ _scratch_mkfs "-b 16384 $frag $comp" >/dev/null 2>&1
+ if [ $? != 0 ]; then
+ echo "mksquashfs failed."
+ continue
+ fi
+ echo "Testing mount and diff data."
+ _scratch_mount
+ diff -r $THIS_TEST_DIR $SCRATCH_MNT/testdir
+ _scratch_unmount
+ done
+done
+
+for blocksize in 4096 8192 32768; do
+ echo "making squashfs image using $blocksize blocksize"
+ _scratch_mkfs "-b $blocksize" >/dev/null 2>&1
+ if [ $? != 0 ]; then
+ echo "mksquashfs failed."
+ continue
+ fi
+ echo "Testing mount and diff data."
+ _scratch_mount
+ diff -r $THIS_TEST_DIR $SCRATCH_MNT/testdir
+ _scratch_unmount
+done
+
+status=0
+exit
diff --git a/tests/squashfs/004.out b/tests/squashfs/004.out
new file mode 100644
index 00000000..e6b65559
--- /dev/null
+++ b/tests/squashfs/004.out
@@ -0,0 +1,23 @@
+QA output created by 004
+making squashfs image using 16384 blocksize, -no-fragments, -noI
+Testing mount and diff data.
+making squashfs image using 16384 blocksize, -no-fragments, -noD
+Testing mount and diff data.
+making squashfs image using 16384 blocksize, -no-fragments, -noF
+Testing mount and diff data.
+making squashfs image using 16384 blocksize, -no-fragments, -noX
+Testing mount and diff data.
+making squashfs image using 16384 blocksize, -always-use-fragments, -noI
+Testing mount and diff data.
+making squashfs image using 16384 blocksize, -always-use-fragments, -noD
+Testing mount and diff data.
+making squashfs image using 16384 blocksize, -always-use-fragments, -noF
+Testing mount and diff data.
+making squashfs image using 16384 blocksize, -always-use-fragments, -noX
+Testing mount and diff data.
+making squashfs image using 4096 blocksize
+Testing mount and diff data.
+making squashfs image using 8192 blocksize
+Testing mount and diff data.
+making squashfs image using 32768 blocksize
+Testing mount and diff data.
diff --git a/tests/squashfs/005 b/tests/squashfs/005
new file mode 100755
index 00000000..2935123d
--- /dev/null
+++ b/tests/squashfs/005
@@ -0,0 +1,54 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+# FS QA Test No. 005
+#
+# mksquashfs -all-root, -force-uid uid, -force-gid gid test
+#
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $testfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+
+testfile=$SCRATCH_DEV/testfile
+rm -f $testfile
+
+echo test >$testfile
+chown 1 $testfile
+chgrp 2 $testfile
+chmod 421 $testfile
+
+for ids in "-all-root" "-force-uid 2" "-force-gid 1"; do
+ echo "making squashfs image using $ids"
+ _scratch_mkfs "$ids" >/dev/null 2>&1
+ if [ $? != 0 ]; then
+ echo "mksquashfs failed."
+ continue
+ fi
+ echo "getting uid, gid"
+ _scratch_mount
+ stat -c %u $SCRATCH_MNT/testfile
+ stat -c %g $SCRATCH_MNT/testfile
+ _scratch_unmount
+done
+
+# success, all done
+status=0
+exit
diff --git a/tests/squashfs/005.out b/tests/squashfs/005.out
new file mode 100644
index 00000000..1ee4f9c3
--- /dev/null
+++ b/tests/squashfs/005.out
@@ -0,0 +1,13 @@
+QA output created by 005
+making squashfs image using -all-root
+getting uid, gid
+0
+0
+making squashfs image using -force-uid 2
+getting uid, gid
+2
+2
+making squashfs image using -force-gid 1
+getting uid, gid
+1
+1
diff --git a/tests/squashfs/Makefile b/tests/squashfs/Makefile
new file mode 100644
index 00000000..bbdc91ea
--- /dev/null
+++ b/tests/squashfs/Makefile
@@ -0,0 +1,20 @@
+#
+# Copyright (c) 2019 Huawei. All Rights Reserved.
+#
+
+TOPDIR = ../..
+include $(TOPDIR)/include/builddefs
+
+SQUASHFS_DIR = squashfs
+TARGET_DIR = $(PKG_LIB_DIR)/$(TESTS_DIR)/$(SQUASHFS_DIR)
+
+include $(BUILDRULES)
+
+install:
+ $(INSTALL) -m 755 -d $(TARGET_DIR)
+ $(INSTALL) -m 755 $(TESTS) $(TARGET_DIR)
+ $(INSTALL) -m 644 group $(TARGET_DIR)
+ $(INSTALL) -m 644 $(OUTFILES) $(TARGET_DIR)
+
+# Nothing.
+install-dev install-lib:
diff --git a/tests/squashfs/group b/tests/squashfs/group
new file mode 100644
index 00000000..a3544bc1
--- /dev/null
+++ b/tests/squashfs/group
@@ -0,0 +1,10 @@
+# QA groups control file
+# Defines test groups and nominal group owners
+# - do not start group names with a digit
+# - comment line before each group is "new" description
+#
+001 auto squashfs
+002 auto squashfs
+003 auto squashfs
+004 auto squashfs
+005 auto squashfs
--
2.16.2.dirty
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH 0/6] squashfs: introduce squashfs support
2019-01-22 3:24 [PATCH 0/6] squashfs: introduce squashfs support zhengbin
` (5 preceding siblings ...)
2019-01-22 3:24 ` [PATCH 6/6] squashfs: add mksquashfs options test zhengbin
@ 2019-01-25 10:49 ` zhengbin (A)
2019-01-29 14:44 ` zhengbin (A)
2019-02-24 15:39 ` Eryu Guan
7 siblings, 1 reply; 16+ messages in thread
From: zhengbin (A) @ 2019-01-25 10:49 UTC (permalink / raw)
To: david, guaneryu, fstests; +Cc: houtao1, zhaohongjiang
Ping?
On 2019/1/22 11:24, zhengbin wrote:
> This patch add squashfs support in xfstests-dev. Add two directories
> in tests directory, readonly can also be used for other readonly
> filesystem, squashfs is just used for squashfs filesystem.
> tests/readonly/001 mount test
> tests/readonly/002--010 metadata test
> tests/readonly/011--018 data test
> tests/readonly/019--021 xattr test
> tests/squashfs/001--005 mksquashfs options test
>
> The reason of use 'readonly' directory instead of generic/shard is:
> The step of tests in readonly filesystem(such as squashfs) are
> as follows:
> 1. write data in $SCRATCH_DEV
> 2. mkfs $SCRATCH_DEV file
> 3. mount file $SCRATCH_MNT
> 4. test in $SCRATCH_MNT
>
> While the rw filesystems are as follows:
> 1. mkfs $SCRATCH_DEV
> 2. mount $SCRATCH_DEV $SCRATCH_MNT
> 3. test in $SCRATCH_MNT(just write data in $SCRATCH_MNT)
>
> The tests in generic/shared are set as rw filesystem, it is hard
> to use this in readonly filesystem, use 'readonly' dir which can
> be easier to read.
>
> PS: As readonly filesystems need to mkfs in every test, do not
> use TEST_DEV&TEST_DIR.
>
> zhengbin (6):
> squashfs: add squashfs support
> squashfs: add mount test
> squashfs: add metadata test
> squashfs: add data test
> squashfs: add xattr test
> squashfs: add mksquashfs options test
>
> .gitignore | 1 +
> README.squashfs | 12 ++
> check | 19 ++-
> common/attr | 5 +
> common/config | 6 +
> common/rc | 63 ++++++++-
> src/aio-dio-regress/aio-subblock-eof-read.c | 84 ++++++++++++
> tests/readonly/001 | 97 ++++++++++++++
> tests/readonly/001.out | 2 +
> tests/readonly/002 | 48 +++++++
> tests/readonly/002.out | 6 +
> tests/readonly/003 | 72 +++++++++++
> tests/readonly/003.out | 5 +
> tests/readonly/004 | 50 +++++++
> tests/readonly/004.out | 3 +
> tests/readonly/005 | 77 +++++++++++
> tests/readonly/005.out | 2 +
> tests/readonly/006 | 48 +++++++
> tests/readonly/006.out | 4 +
> tests/readonly/007 | 74 +++++++++++
> tests/readonly/007.out | 9 ++
> tests/readonly/008 | 193 ++++++++++++++++++++++++++++
> tests/readonly/008.out | 34 +++++
> tests/readonly/009 | 50 +++++++
> tests/readonly/009.out | 2 +
> tests/readonly/010 | 49 +++++++
> tests/readonly/010.out | 4 +
> tests/readonly/011 | 92 +++++++++++++
> tests/readonly/011.out | 30 +++++
> tests/readonly/012 | 56 ++++++++
> tests/readonly/012.out | 5 +
> tests/readonly/013 | 47 +++++++
> tests/readonly/013.out | 2 +
> tests/readonly/014 | 46 +++++++
> tests/readonly/014.out | 2 +
> tests/readonly/015 | 42 ++++++
> tests/readonly/015.out | 2 +
> tests/readonly/016 | 145 +++++++++++++++++++++
> tests/readonly/016.out | 8 ++
> tests/readonly/017 | 107 +++++++++++++++
> tests/readonly/017.out | 2 +
> tests/readonly/018 | 49 +++++++
> tests/readonly/018.out | 2 +
> tests/readonly/019 | 109 ++++++++++++++++
> tests/readonly/019.out | 45 +++++++
> tests/readonly/020 | 56 ++++++++
> tests/readonly/020.out | 9 ++
> tests/readonly/021 | 74 +++++++++++
> tests/readonly/021.out | 11 ++
> tests/readonly/Makefile | 20 +++
> tests/readonly/group | 26 ++++
> tests/squashfs/001 | 60 +++++++++
> tests/squashfs/001.out | 9 ++
> tests/squashfs/002 | 40 ++++++
> tests/squashfs/002.out | 2 +
> tests/squashfs/003 | 55 ++++++++
> tests/squashfs/003.out | 12 ++
> tests/squashfs/004 | 73 +++++++++++
> tests/squashfs/004.out | 23 ++++
> tests/squashfs/005 | 54 ++++++++
> tests/squashfs/005.out | 13 ++
> tests/squashfs/Makefile | 20 +++
> tests/squashfs/group | 10 ++
> 63 files changed, 2372 insertions(+), 5 deletions(-)
> create mode 100644 README.squashfs
> create mode 100644 src/aio-dio-regress/aio-subblock-eof-read.c
> create mode 100755 tests/readonly/001
> create mode 100644 tests/readonly/001.out
> create mode 100755 tests/readonly/002
> create mode 100644 tests/readonly/002.out
> create mode 100755 tests/readonly/003
> create mode 100644 tests/readonly/003.out
> create mode 100755 tests/readonly/004
> create mode 100644 tests/readonly/004.out
> create mode 100755 tests/readonly/005
> create mode 100644 tests/readonly/005.out
> create mode 100755 tests/readonly/006
> create mode 100644 tests/readonly/006.out
> create mode 100755 tests/readonly/007
> create mode 100644 tests/readonly/007.out
> create mode 100755 tests/readonly/008
> create mode 100644 tests/readonly/008.out
> create mode 100755 tests/readonly/009
> create mode 100644 tests/readonly/009.out
> create mode 100755 tests/readonly/010
> create mode 100644 tests/readonly/010.out
> create mode 100755 tests/readonly/011
> create mode 100644 tests/readonly/011.out
> create mode 100755 tests/readonly/012
> create mode 100644 tests/readonly/012.out
> create mode 100755 tests/readonly/013
> create mode 100644 tests/readonly/013.out
> create mode 100755 tests/readonly/014
> create mode 100644 tests/readonly/014.out
> create mode 100755 tests/readonly/015
> create mode 100644 tests/readonly/015.out
> create mode 100755 tests/readonly/016
> create mode 100644 tests/readonly/016.out
> create mode 100755 tests/readonly/017
> create mode 100644 tests/readonly/017.out
> create mode 100755 tests/readonly/018
> create mode 100644 tests/readonly/018.out
> create mode 100755 tests/readonly/019
> create mode 100644 tests/readonly/019.out
> create mode 100755 tests/readonly/020
> create mode 100644 tests/readonly/020.out
> create mode 100755 tests/readonly/021
> create mode 100644 tests/readonly/021.out
> create mode 100644 tests/readonly/Makefile
> create mode 100644 tests/readonly/group
> create mode 100755 tests/squashfs/001
> create mode 100644 tests/squashfs/001.out
> create mode 100755 tests/squashfs/002
> create mode 100644 tests/squashfs/002.out
> create mode 100755 tests/squashfs/003
> create mode 100644 tests/squashfs/003.out
> create mode 100755 tests/squashfs/004
> create mode 100644 tests/squashfs/004.out
> create mode 100755 tests/squashfs/005
> create mode 100644 tests/squashfs/005.out
> create mode 100644 tests/squashfs/Makefile
> create mode 100644 tests/squashfs/group
>
> --
> 2.16.2.dirty
>
>
> .
>
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH 0/6] squashfs: introduce squashfs support
2019-01-25 10:49 ` [PATCH 0/6] squashfs: introduce squashfs support zhengbin (A)
@ 2019-01-29 14:44 ` zhengbin (A)
2019-02-03 9:20 ` Eryu Guan
0 siblings, 1 reply; 16+ messages in thread
From: zhengbin (A) @ 2019-01-29 14:44 UTC (permalink / raw)
To: david, guaneryu, fstests; +Cc: houtao1, zhaohongjiang
ping
On 2019/1/25 18:49, zhengbin (A) wrote:
> Ping?
>
> On 2019/1/22 11:24, zhengbin wrote:
>> This patch add squashfs support in xfstests-dev. Add two directories
>> in tests directory, readonly can also be used for other readonly
>> filesystem, squashfs is just used for squashfs filesystem.
>> tests/readonly/001 mount test
>> tests/readonly/002--010 metadata test
>> tests/readonly/011--018 data test
>> tests/readonly/019--021 xattr test
>> tests/squashfs/001--005 mksquashfs options test
>>
>> The reason of use 'readonly' directory instead of generic/shard is:
>> The step of tests in readonly filesystem(such as squashfs) are
>> as follows:
>> 1. write data in $SCRATCH_DEV
>> 2. mkfs $SCRATCH_DEV file
>> 3. mount file $SCRATCH_MNT
>> 4. test in $SCRATCH_MNT
>>
>> While the rw filesystems are as follows:
>> 1. mkfs $SCRATCH_DEV
>> 2. mount $SCRATCH_DEV $SCRATCH_MNT
>> 3. test in $SCRATCH_MNT(just write data in $SCRATCH_MNT)
>>
>> The tests in generic/shared are set as rw filesystem, it is hard
>> to use this in readonly filesystem, use 'readonly' dir which can
>> be easier to read.
>>
>> PS: As readonly filesystems need to mkfs in every test, do not
>> use TEST_DEV&TEST_DIR.
>>
>> zhengbin (6):
>> squashfs: add squashfs support
>> squashfs: add mount test
>> squashfs: add metadata test
>> squashfs: add data test
>> squashfs: add xattr test
>> squashfs: add mksquashfs options test
>>
>> .gitignore | 1 +
>> README.squashfs | 12 ++
>> check | 19 ++-
>> common/attr | 5 +
>> common/config | 6 +
>> common/rc | 63 ++++++++-
>> src/aio-dio-regress/aio-subblock-eof-read.c | 84 ++++++++++++
>> tests/readonly/001 | 97 ++++++++++++++
>> tests/readonly/001.out | 2 +
>> tests/readonly/002 | 48 +++++++
>> tests/readonly/002.out | 6 +
>> tests/readonly/003 | 72 +++++++++++
>> tests/readonly/003.out | 5 +
>> tests/readonly/004 | 50 +++++++
>> tests/readonly/004.out | 3 +
>> tests/readonly/005 | 77 +++++++++++
>> tests/readonly/005.out | 2 +
>> tests/readonly/006 | 48 +++++++
>> tests/readonly/006.out | 4 +
>> tests/readonly/007 | 74 +++++++++++
>> tests/readonly/007.out | 9 ++
>> tests/readonly/008 | 193 ++++++++++++++++++++++++++++
>> tests/readonly/008.out | 34 +++++
>> tests/readonly/009 | 50 +++++++
>> tests/readonly/009.out | 2 +
>> tests/readonly/010 | 49 +++++++
>> tests/readonly/010.out | 4 +
>> tests/readonly/011 | 92 +++++++++++++
>> tests/readonly/011.out | 30 +++++
>> tests/readonly/012 | 56 ++++++++
>> tests/readonly/012.out | 5 +
>> tests/readonly/013 | 47 +++++++
>> tests/readonly/013.out | 2 +
>> tests/readonly/014 | 46 +++++++
>> tests/readonly/014.out | 2 +
>> tests/readonly/015 | 42 ++++++
>> tests/readonly/015.out | 2 +
>> tests/readonly/016 | 145 +++++++++++++++++++++
>> tests/readonly/016.out | 8 ++
>> tests/readonly/017 | 107 +++++++++++++++
>> tests/readonly/017.out | 2 +
>> tests/readonly/018 | 49 +++++++
>> tests/readonly/018.out | 2 +
>> tests/readonly/019 | 109 ++++++++++++++++
>> tests/readonly/019.out | 45 +++++++
>> tests/readonly/020 | 56 ++++++++
>> tests/readonly/020.out | 9 ++
>> tests/readonly/021 | 74 +++++++++++
>> tests/readonly/021.out | 11 ++
>> tests/readonly/Makefile | 20 +++
>> tests/readonly/group | 26 ++++
>> tests/squashfs/001 | 60 +++++++++
>> tests/squashfs/001.out | 9 ++
>> tests/squashfs/002 | 40 ++++++
>> tests/squashfs/002.out | 2 +
>> tests/squashfs/003 | 55 ++++++++
>> tests/squashfs/003.out | 12 ++
>> tests/squashfs/004 | 73 +++++++++++
>> tests/squashfs/004.out | 23 ++++
>> tests/squashfs/005 | 54 ++++++++
>> tests/squashfs/005.out | 13 ++
>> tests/squashfs/Makefile | 20 +++
>> tests/squashfs/group | 10 ++
>> 63 files changed, 2372 insertions(+), 5 deletions(-)
>> create mode 100644 README.squashfs
>> create mode 100644 src/aio-dio-regress/aio-subblock-eof-read.c
>> create mode 100755 tests/readonly/001
>> create mode 100644 tests/readonly/001.out
>> create mode 100755 tests/readonly/002
>> create mode 100644 tests/readonly/002.out
>> create mode 100755 tests/readonly/003
>> create mode 100644 tests/readonly/003.out
>> create mode 100755 tests/readonly/004
>> create mode 100644 tests/readonly/004.out
>> create mode 100755 tests/readonly/005
>> create mode 100644 tests/readonly/005.out
>> create mode 100755 tests/readonly/006
>> create mode 100644 tests/readonly/006.out
>> create mode 100755 tests/readonly/007
>> create mode 100644 tests/readonly/007.out
>> create mode 100755 tests/readonly/008
>> create mode 100644 tests/readonly/008.out
>> create mode 100755 tests/readonly/009
>> create mode 100644 tests/readonly/009.out
>> create mode 100755 tests/readonly/010
>> create mode 100644 tests/readonly/010.out
>> create mode 100755 tests/readonly/011
>> create mode 100644 tests/readonly/011.out
>> create mode 100755 tests/readonly/012
>> create mode 100644 tests/readonly/012.out
>> create mode 100755 tests/readonly/013
>> create mode 100644 tests/readonly/013.out
>> create mode 100755 tests/readonly/014
>> create mode 100644 tests/readonly/014.out
>> create mode 100755 tests/readonly/015
>> create mode 100644 tests/readonly/015.out
>> create mode 100755 tests/readonly/016
>> create mode 100644 tests/readonly/016.out
>> create mode 100755 tests/readonly/017
>> create mode 100644 tests/readonly/017.out
>> create mode 100755 tests/readonly/018
>> create mode 100644 tests/readonly/018.out
>> create mode 100755 tests/readonly/019
>> create mode 100644 tests/readonly/019.out
>> create mode 100755 tests/readonly/020
>> create mode 100644 tests/readonly/020.out
>> create mode 100755 tests/readonly/021
>> create mode 100644 tests/readonly/021.out
>> create mode 100644 tests/readonly/Makefile
>> create mode 100644 tests/readonly/group
>> create mode 100755 tests/squashfs/001
>> create mode 100644 tests/squashfs/001.out
>> create mode 100755 tests/squashfs/002
>> create mode 100644 tests/squashfs/002.out
>> create mode 100755 tests/squashfs/003
>> create mode 100644 tests/squashfs/003.out
>> create mode 100755 tests/squashfs/004
>> create mode 100644 tests/squashfs/004.out
>> create mode 100755 tests/squashfs/005
>> create mode 100644 tests/squashfs/005.out
>> create mode 100644 tests/squashfs/Makefile
>> create mode 100644 tests/squashfs/group
>>
>> --
>> 2.16.2.dirty
>>
>>
>> .
>>
>
>
> .
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 0/6] squashfs: introduce squashfs support
2019-01-29 14:44 ` zhengbin (A)
@ 2019-02-03 9:20 ` Eryu Guan
0 siblings, 0 replies; 16+ messages in thread
From: Eryu Guan @ 2019-02-03 9:20 UTC (permalink / raw)
To: zhengbin (A); +Cc: david, fstests, houtao1, zhaohongjiang
On Tue, Jan 29, 2019 at 10:44:13PM +0800, zhengbin (A) wrote:
> ping
Sorry for the late response! I'm on holiday now and will only check
emails from time to time, and I'll be back on Feb. 11. I may need more
time to check this suqashfs support and new tests.
Thanks,
Eryu
>
> On 2019/1/25 18:49, zhengbin (A) wrote:
> > Ping?
> >
> > On 2019/1/22 11:24, zhengbin wrote:
> >> This patch add squashfs support in xfstests-dev. Add two directories
> >> in tests directory, readonly can also be used for other readonly
> >> filesystem, squashfs is just used for squashfs filesystem.
> >> tests/readonly/001 mount test
> >> tests/readonly/002--010 metadata test
> >> tests/readonly/011--018 data test
> >> tests/readonly/019--021 xattr test
> >> tests/squashfs/001--005 mksquashfs options test
> >>
> >> The reason of use 'readonly' directory instead of generic/shard is:
> >> The step of tests in readonly filesystem(such as squashfs) are
> >> as follows:
> >> 1. write data in $SCRATCH_DEV
> >> 2. mkfs $SCRATCH_DEV file
> >> 3. mount file $SCRATCH_MNT
> >> 4. test in $SCRATCH_MNT
> >>
> >> While the rw filesystems are as follows:
> >> 1. mkfs $SCRATCH_DEV
> >> 2. mount $SCRATCH_DEV $SCRATCH_MNT
> >> 3. test in $SCRATCH_MNT(just write data in $SCRATCH_MNT)
> >>
> >> The tests in generic/shared are set as rw filesystem, it is hard
> >> to use this in readonly filesystem, use 'readonly' dir which can
> >> be easier to read.
> >>
> >> PS: As readonly filesystems need to mkfs in every test, do not
> >> use TEST_DEV&TEST_DIR.
> >>
> >> zhengbin (6):
> >> squashfs: add squashfs support
> >> squashfs: add mount test
> >> squashfs: add metadata test
> >> squashfs: add data test
> >> squashfs: add xattr test
> >> squashfs: add mksquashfs options test
> >>
> >> .gitignore | 1 +
> >> README.squashfs | 12 ++
> >> check | 19 ++-
> >> common/attr | 5 +
> >> common/config | 6 +
> >> common/rc | 63 ++++++++-
> >> src/aio-dio-regress/aio-subblock-eof-read.c | 84 ++++++++++++
> >> tests/readonly/001 | 97 ++++++++++++++
> >> tests/readonly/001.out | 2 +
> >> tests/readonly/002 | 48 +++++++
> >> tests/readonly/002.out | 6 +
> >> tests/readonly/003 | 72 +++++++++++
> >> tests/readonly/003.out | 5 +
> >> tests/readonly/004 | 50 +++++++
> >> tests/readonly/004.out | 3 +
> >> tests/readonly/005 | 77 +++++++++++
> >> tests/readonly/005.out | 2 +
> >> tests/readonly/006 | 48 +++++++
> >> tests/readonly/006.out | 4 +
> >> tests/readonly/007 | 74 +++++++++++
> >> tests/readonly/007.out | 9 ++
> >> tests/readonly/008 | 193 ++++++++++++++++++++++++++++
> >> tests/readonly/008.out | 34 +++++
> >> tests/readonly/009 | 50 +++++++
> >> tests/readonly/009.out | 2 +
> >> tests/readonly/010 | 49 +++++++
> >> tests/readonly/010.out | 4 +
> >> tests/readonly/011 | 92 +++++++++++++
> >> tests/readonly/011.out | 30 +++++
> >> tests/readonly/012 | 56 ++++++++
> >> tests/readonly/012.out | 5 +
> >> tests/readonly/013 | 47 +++++++
> >> tests/readonly/013.out | 2 +
> >> tests/readonly/014 | 46 +++++++
> >> tests/readonly/014.out | 2 +
> >> tests/readonly/015 | 42 ++++++
> >> tests/readonly/015.out | 2 +
> >> tests/readonly/016 | 145 +++++++++++++++++++++
> >> tests/readonly/016.out | 8 ++
> >> tests/readonly/017 | 107 +++++++++++++++
> >> tests/readonly/017.out | 2 +
> >> tests/readonly/018 | 49 +++++++
> >> tests/readonly/018.out | 2 +
> >> tests/readonly/019 | 109 ++++++++++++++++
> >> tests/readonly/019.out | 45 +++++++
> >> tests/readonly/020 | 56 ++++++++
> >> tests/readonly/020.out | 9 ++
> >> tests/readonly/021 | 74 +++++++++++
> >> tests/readonly/021.out | 11 ++
> >> tests/readonly/Makefile | 20 +++
> >> tests/readonly/group | 26 ++++
> >> tests/squashfs/001 | 60 +++++++++
> >> tests/squashfs/001.out | 9 ++
> >> tests/squashfs/002 | 40 ++++++
> >> tests/squashfs/002.out | 2 +
> >> tests/squashfs/003 | 55 ++++++++
> >> tests/squashfs/003.out | 12 ++
> >> tests/squashfs/004 | 73 +++++++++++
> >> tests/squashfs/004.out | 23 ++++
> >> tests/squashfs/005 | 54 ++++++++
> >> tests/squashfs/005.out | 13 ++
> >> tests/squashfs/Makefile | 20 +++
> >> tests/squashfs/group | 10 ++
> >> 63 files changed, 2372 insertions(+), 5 deletions(-)
> >> create mode 100644 README.squashfs
> >> create mode 100644 src/aio-dio-regress/aio-subblock-eof-read.c
> >> create mode 100755 tests/readonly/001
> >> create mode 100644 tests/readonly/001.out
> >> create mode 100755 tests/readonly/002
> >> create mode 100644 tests/readonly/002.out
> >> create mode 100755 tests/readonly/003
> >> create mode 100644 tests/readonly/003.out
> >> create mode 100755 tests/readonly/004
> >> create mode 100644 tests/readonly/004.out
> >> create mode 100755 tests/readonly/005
> >> create mode 100644 tests/readonly/005.out
> >> create mode 100755 tests/readonly/006
> >> create mode 100644 tests/readonly/006.out
> >> create mode 100755 tests/readonly/007
> >> create mode 100644 tests/readonly/007.out
> >> create mode 100755 tests/readonly/008
> >> create mode 100644 tests/readonly/008.out
> >> create mode 100755 tests/readonly/009
> >> create mode 100644 tests/readonly/009.out
> >> create mode 100755 tests/readonly/010
> >> create mode 100644 tests/readonly/010.out
> >> create mode 100755 tests/readonly/011
> >> create mode 100644 tests/readonly/011.out
> >> create mode 100755 tests/readonly/012
> >> create mode 100644 tests/readonly/012.out
> >> create mode 100755 tests/readonly/013
> >> create mode 100644 tests/readonly/013.out
> >> create mode 100755 tests/readonly/014
> >> create mode 100644 tests/readonly/014.out
> >> create mode 100755 tests/readonly/015
> >> create mode 100644 tests/readonly/015.out
> >> create mode 100755 tests/readonly/016
> >> create mode 100644 tests/readonly/016.out
> >> create mode 100755 tests/readonly/017
> >> create mode 100644 tests/readonly/017.out
> >> create mode 100755 tests/readonly/018
> >> create mode 100644 tests/readonly/018.out
> >> create mode 100755 tests/readonly/019
> >> create mode 100644 tests/readonly/019.out
> >> create mode 100755 tests/readonly/020
> >> create mode 100644 tests/readonly/020.out
> >> create mode 100755 tests/readonly/021
> >> create mode 100644 tests/readonly/021.out
> >> create mode 100644 tests/readonly/Makefile
> >> create mode 100644 tests/readonly/group
> >> create mode 100755 tests/squashfs/001
> >> create mode 100644 tests/squashfs/001.out
> >> create mode 100755 tests/squashfs/002
> >> create mode 100644 tests/squashfs/002.out
> >> create mode 100755 tests/squashfs/003
> >> create mode 100644 tests/squashfs/003.out
> >> create mode 100755 tests/squashfs/004
> >> create mode 100644 tests/squashfs/004.out
> >> create mode 100755 tests/squashfs/005
> >> create mode 100644 tests/squashfs/005.out
> >> create mode 100644 tests/squashfs/Makefile
> >> create mode 100644 tests/squashfs/group
> >>
> >> --
> >> 2.16.2.dirty
> >>
> >>
> >> .
> >>
> >
> >
> > .
> >
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 0/6] squashfs: introduce squashfs support
2019-01-22 3:24 [PATCH 0/6] squashfs: introduce squashfs support zhengbin
` (6 preceding siblings ...)
2019-01-25 10:49 ` [PATCH 0/6] squashfs: introduce squashfs support zhengbin (A)
@ 2019-02-24 15:39 ` Eryu Guan
2019-02-25 1:32 ` zhengbin (A)
2019-02-25 7:55 ` Gao Xiang
7 siblings, 2 replies; 16+ messages in thread
From: Eryu Guan @ 2019-02-24 15:39 UTC (permalink / raw)
To: zhengbin; +Cc: david, fstests, houtao1, zhaohongjiang
[Sorry for being so long to review this squashfs support.]
On Tue, Jan 22, 2019 at 11:24:02AM +0800, zhengbin wrote:
> This patch add squashfs support in xfstests-dev. Add two directories
> in tests directory, readonly can also be used for other readonly
> filesystem, squashfs is just used for squashfs filesystem.
> tests/readonly/001 mount test
> tests/readonly/002--010 metadata test
> tests/readonly/011--018 data test
> tests/readonly/019--021 xattr test
> tests/squashfs/001--005 mksquashfs options test
I don't quite like the idea of "forking" random tests from 'generic' to
'readonly'. The biggest benefit of adding new fs support to fstests is
that it shares most of the 'generic' tests and gets good test coverage.
But forking a very small subset of generic tests not only defeats the
benefit but also adding extra maintain burden.
But the problem is that squashfs is a readonly filesystem and sharing
the existing generic tests is not easy. (Actually I've been looking at
this series several times, but couldn't come out with a good solution.)
Because fstests harness assumes the filesystem being tested is writable
by default, various _require rules also write/create files to check if a
functionality is supported by the underlying filesystem. This leads me
to wonder if fstests is suitable for such readonly filesystems?
I'm glad to hear what do others think, any comments are welcomed!
Thanks,
Eryu
>
> The reason of use 'readonly' directory instead of generic/shard is:
> The step of tests in readonly filesystem(such as squashfs) are
> as follows:
> 1. write data in $SCRATCH_DEV
> 2. mkfs $SCRATCH_DEV file
> 3. mount file $SCRATCH_MNT
> 4. test in $SCRATCH_MNT
>
> While the rw filesystems are as follows:
> 1. mkfs $SCRATCH_DEV
> 2. mount $SCRATCH_DEV $SCRATCH_MNT
> 3. test in $SCRATCH_MNT(just write data in $SCRATCH_MNT)
>
> The tests in generic/shared are set as rw filesystem, it is hard
> to use this in readonly filesystem, use 'readonly' dir which can
> be easier to read.
>
> PS: As readonly filesystems need to mkfs in every test, do not
> use TEST_DEV&TEST_DIR.
>
> zhengbin (6):
> squashfs: add squashfs support
> squashfs: add mount test
> squashfs: add metadata test
> squashfs: add data test
> squashfs: add xattr test
> squashfs: add mksquashfs options test
>
> .gitignore | 1 +
> README.squashfs | 12 ++
> check | 19 ++-
> common/attr | 5 +
> common/config | 6 +
> common/rc | 63 ++++++++-
> src/aio-dio-regress/aio-subblock-eof-read.c | 84 ++++++++++++
> tests/readonly/001 | 97 ++++++++++++++
> tests/readonly/001.out | 2 +
> tests/readonly/002 | 48 +++++++
> tests/readonly/002.out | 6 +
> tests/readonly/003 | 72 +++++++++++
> tests/readonly/003.out | 5 +
> tests/readonly/004 | 50 +++++++
> tests/readonly/004.out | 3 +
> tests/readonly/005 | 77 +++++++++++
> tests/readonly/005.out | 2 +
> tests/readonly/006 | 48 +++++++
> tests/readonly/006.out | 4 +
> tests/readonly/007 | 74 +++++++++++
> tests/readonly/007.out | 9 ++
> tests/readonly/008 | 193 ++++++++++++++++++++++++++++
> tests/readonly/008.out | 34 +++++
> tests/readonly/009 | 50 +++++++
> tests/readonly/009.out | 2 +
> tests/readonly/010 | 49 +++++++
> tests/readonly/010.out | 4 +
> tests/readonly/011 | 92 +++++++++++++
> tests/readonly/011.out | 30 +++++
> tests/readonly/012 | 56 ++++++++
> tests/readonly/012.out | 5 +
> tests/readonly/013 | 47 +++++++
> tests/readonly/013.out | 2 +
> tests/readonly/014 | 46 +++++++
> tests/readonly/014.out | 2 +
> tests/readonly/015 | 42 ++++++
> tests/readonly/015.out | 2 +
> tests/readonly/016 | 145 +++++++++++++++++++++
> tests/readonly/016.out | 8 ++
> tests/readonly/017 | 107 +++++++++++++++
> tests/readonly/017.out | 2 +
> tests/readonly/018 | 49 +++++++
> tests/readonly/018.out | 2 +
> tests/readonly/019 | 109 ++++++++++++++++
> tests/readonly/019.out | 45 +++++++
> tests/readonly/020 | 56 ++++++++
> tests/readonly/020.out | 9 ++
> tests/readonly/021 | 74 +++++++++++
> tests/readonly/021.out | 11 ++
> tests/readonly/Makefile | 20 +++
> tests/readonly/group | 26 ++++
> tests/squashfs/001 | 60 +++++++++
> tests/squashfs/001.out | 9 ++
> tests/squashfs/002 | 40 ++++++
> tests/squashfs/002.out | 2 +
> tests/squashfs/003 | 55 ++++++++
> tests/squashfs/003.out | 12 ++
> tests/squashfs/004 | 73 +++++++++++
> tests/squashfs/004.out | 23 ++++
> tests/squashfs/005 | 54 ++++++++
> tests/squashfs/005.out | 13 ++
> tests/squashfs/Makefile | 20 +++
> tests/squashfs/group | 10 ++
> 63 files changed, 2372 insertions(+), 5 deletions(-)
> create mode 100644 README.squashfs
> create mode 100644 src/aio-dio-regress/aio-subblock-eof-read.c
> create mode 100755 tests/readonly/001
> create mode 100644 tests/readonly/001.out
> create mode 100755 tests/readonly/002
> create mode 100644 tests/readonly/002.out
> create mode 100755 tests/readonly/003
> create mode 100644 tests/readonly/003.out
> create mode 100755 tests/readonly/004
> create mode 100644 tests/readonly/004.out
> create mode 100755 tests/readonly/005
> create mode 100644 tests/readonly/005.out
> create mode 100755 tests/readonly/006
> create mode 100644 tests/readonly/006.out
> create mode 100755 tests/readonly/007
> create mode 100644 tests/readonly/007.out
> create mode 100755 tests/readonly/008
> create mode 100644 tests/readonly/008.out
> create mode 100755 tests/readonly/009
> create mode 100644 tests/readonly/009.out
> create mode 100755 tests/readonly/010
> create mode 100644 tests/readonly/010.out
> create mode 100755 tests/readonly/011
> create mode 100644 tests/readonly/011.out
> create mode 100755 tests/readonly/012
> create mode 100644 tests/readonly/012.out
> create mode 100755 tests/readonly/013
> create mode 100644 tests/readonly/013.out
> create mode 100755 tests/readonly/014
> create mode 100644 tests/readonly/014.out
> create mode 100755 tests/readonly/015
> create mode 100644 tests/readonly/015.out
> create mode 100755 tests/readonly/016
> create mode 100644 tests/readonly/016.out
> create mode 100755 tests/readonly/017
> create mode 100644 tests/readonly/017.out
> create mode 100755 tests/readonly/018
> create mode 100644 tests/readonly/018.out
> create mode 100755 tests/readonly/019
> create mode 100644 tests/readonly/019.out
> create mode 100755 tests/readonly/020
> create mode 100644 tests/readonly/020.out
> create mode 100755 tests/readonly/021
> create mode 100644 tests/readonly/021.out
> create mode 100644 tests/readonly/Makefile
> create mode 100644 tests/readonly/group
> create mode 100755 tests/squashfs/001
> create mode 100644 tests/squashfs/001.out
> create mode 100755 tests/squashfs/002
> create mode 100644 tests/squashfs/002.out
> create mode 100755 tests/squashfs/003
> create mode 100644 tests/squashfs/003.out
> create mode 100755 tests/squashfs/004
> create mode 100644 tests/squashfs/004.out
> create mode 100755 tests/squashfs/005
> create mode 100644 tests/squashfs/005.out
> create mode 100644 tests/squashfs/Makefile
> create mode 100644 tests/squashfs/group
>
> --
> 2.16.2.dirty
>
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH 0/6] squashfs: introduce squashfs support
2019-02-24 15:39 ` Eryu Guan
@ 2019-02-25 1:32 ` zhengbin (A)
2019-02-25 5:21 ` Amir Goldstein
2019-02-25 7:55 ` Gao Xiang
1 sibling, 1 reply; 16+ messages in thread
From: zhengbin (A) @ 2019-02-25 1:32 UTC (permalink / raw)
To: Eryu Guan; +Cc: david, fstests, houtao1, zhaohongjiang
Thanks for your reply.
> I don't quite like the idea of "forking" random tests from 'generic' to
> 'readonly'. The biggest benefit of adding new fs support to fstests is
> that it shares most of the 'generic' tests and gets good test coverage.
> But forking a very small subset of generic tests not only defeats the
> benefit but also adding extra maintain burden
--->I agree that, but if we want to add readonly filesystem support in fstests,
maybe it is the best way?I didn't find a better way
On 2019/2/24 23:39, Eryu Guan wrote:
> [Sorry for being so long to review this squashfs support.]
>
> On Tue, Jan 22, 2019 at 11:24:02AM +0800, zhengbin wrote:
>> This patch add squashfs support in xfstests-dev. Add two directories
>> in tests directory, readonly can also be used for other readonly
>> filesystem, squashfs is just used for squashfs filesystem.
>> tests/readonly/001 mount test
>> tests/readonly/002--010 metadata test
>> tests/readonly/011--018 data test
>> tests/readonly/019--021 xattr test
>> tests/squashfs/001--005 mksquashfs options test
>
> I don't quite like the idea of "forking" random tests from 'generic' to
> 'readonly'. The biggest benefit of adding new fs support to fstests is
> that it shares most of the 'generic' tests and gets good test coverage.
> But forking a very small subset of generic tests not only defeats the
> benefit but also adding extra maintain burden.
>
> But the problem is that squashfs is a readonly filesystem and sharing
> the existing generic tests is not easy. (Actually I've been looking at
> this series several times, but couldn't come out with a good solution.)
> Because fstests harness assumes the filesystem being tested is writable
> by default, various _require rules also write/create files to check if a
> functionality is supported by the underlying filesystem. This leads me
> to wonder if fstests is suitable for such readonly filesystems?
>
> I'm glad to hear what do others think, any comments are welcomed!
>
> Thanks,
> Eryu
>
>>
>> The reason of use 'readonly' directory instead of generic/shard is:
>> The step of tests in readonly filesystem(such as squashfs) are
>> as follows:
>> 1. write data in $SCRATCH_DEV
>> 2. mkfs $SCRATCH_DEV file
>> 3. mount file $SCRATCH_MNT
>> 4. test in $SCRATCH_MNT
>>
>> While the rw filesystems are as follows:
>> 1. mkfs $SCRATCH_DEV
>> 2. mount $SCRATCH_DEV $SCRATCH_MNT
>> 3. test in $SCRATCH_MNT(just write data in $SCRATCH_MNT)
>>
>> The tests in generic/shared are set as rw filesystem, it is hard
>> to use this in readonly filesystem, use 'readonly' dir which can
>> be easier to read.
>>
>> PS: As readonly filesystems need to mkfs in every test, do not
>> use TEST_DEV&TEST_DIR.
>>
>> zhengbin (6):
>> squashfs: add squashfs support
>> squashfs: add mount test
>> squashfs: add metadata test
>> squashfs: add data test
>> squashfs: add xattr test
>> squashfs: add mksquashfs options test
>>
>> .gitignore | 1 +
>> README.squashfs | 12 ++
>> check | 19 ++-
>> common/attr | 5 +
>> common/config | 6 +
>> common/rc | 63 ++++++++-
>> src/aio-dio-regress/aio-subblock-eof-read.c | 84 ++++++++++++
>> tests/readonly/001 | 97 ++++++++++++++
>> tests/readonly/001.out | 2 +
>> tests/readonly/002 | 48 +++++++
>> tests/readonly/002.out | 6 +
>> tests/readonly/003 | 72 +++++++++++
>> tests/readonly/003.out | 5 +
>> tests/readonly/004 | 50 +++++++
>> tests/readonly/004.out | 3 +
>> tests/readonly/005 | 77 +++++++++++
>> tests/readonly/005.out | 2 +
>> tests/readonly/006 | 48 +++++++
>> tests/readonly/006.out | 4 +
>> tests/readonly/007 | 74 +++++++++++
>> tests/readonly/007.out | 9 ++
>> tests/readonly/008 | 193 ++++++++++++++++++++++++++++
>> tests/readonly/008.out | 34 +++++
>> tests/readonly/009 | 50 +++++++
>> tests/readonly/009.out | 2 +
>> tests/readonly/010 | 49 +++++++
>> tests/readonly/010.out | 4 +
>> tests/readonly/011 | 92 +++++++++++++
>> tests/readonly/011.out | 30 +++++
>> tests/readonly/012 | 56 ++++++++
>> tests/readonly/012.out | 5 +
>> tests/readonly/013 | 47 +++++++
>> tests/readonly/013.out | 2 +
>> tests/readonly/014 | 46 +++++++
>> tests/readonly/014.out | 2 +
>> tests/readonly/015 | 42 ++++++
>> tests/readonly/015.out | 2 +
>> tests/readonly/016 | 145 +++++++++++++++++++++
>> tests/readonly/016.out | 8 ++
>> tests/readonly/017 | 107 +++++++++++++++
>> tests/readonly/017.out | 2 +
>> tests/readonly/018 | 49 +++++++
>> tests/readonly/018.out | 2 +
>> tests/readonly/019 | 109 ++++++++++++++++
>> tests/readonly/019.out | 45 +++++++
>> tests/readonly/020 | 56 ++++++++
>> tests/readonly/020.out | 9 ++
>> tests/readonly/021 | 74 +++++++++++
>> tests/readonly/021.out | 11 ++
>> tests/readonly/Makefile | 20 +++
>> tests/readonly/group | 26 ++++
>> tests/squashfs/001 | 60 +++++++++
>> tests/squashfs/001.out | 9 ++
>> tests/squashfs/002 | 40 ++++++
>> tests/squashfs/002.out | 2 +
>> tests/squashfs/003 | 55 ++++++++
>> tests/squashfs/003.out | 12 ++
>> tests/squashfs/004 | 73 +++++++++++
>> tests/squashfs/004.out | 23 ++++
>> tests/squashfs/005 | 54 ++++++++
>> tests/squashfs/005.out | 13 ++
>> tests/squashfs/Makefile | 20 +++
>> tests/squashfs/group | 10 ++
>> 63 files changed, 2372 insertions(+), 5 deletions(-)
>> create mode 100644 README.squashfs
>> create mode 100644 src/aio-dio-regress/aio-subblock-eof-read.c
>> create mode 100755 tests/readonly/001
>> create mode 100644 tests/readonly/001.out
>> create mode 100755 tests/readonly/002
>> create mode 100644 tests/readonly/002.out
>> create mode 100755 tests/readonly/003
>> create mode 100644 tests/readonly/003.out
>> create mode 100755 tests/readonly/004
>> create mode 100644 tests/readonly/004.out
>> create mode 100755 tests/readonly/005
>> create mode 100644 tests/readonly/005.out
>> create mode 100755 tests/readonly/006
>> create mode 100644 tests/readonly/006.out
>> create mode 100755 tests/readonly/007
>> create mode 100644 tests/readonly/007.out
>> create mode 100755 tests/readonly/008
>> create mode 100644 tests/readonly/008.out
>> create mode 100755 tests/readonly/009
>> create mode 100644 tests/readonly/009.out
>> create mode 100755 tests/readonly/010
>> create mode 100644 tests/readonly/010.out
>> create mode 100755 tests/readonly/011
>> create mode 100644 tests/readonly/011.out
>> create mode 100755 tests/readonly/012
>> create mode 100644 tests/readonly/012.out
>> create mode 100755 tests/readonly/013
>> create mode 100644 tests/readonly/013.out
>> create mode 100755 tests/readonly/014
>> create mode 100644 tests/readonly/014.out
>> create mode 100755 tests/readonly/015
>> create mode 100644 tests/readonly/015.out
>> create mode 100755 tests/readonly/016
>> create mode 100644 tests/readonly/016.out
>> create mode 100755 tests/readonly/017
>> create mode 100644 tests/readonly/017.out
>> create mode 100755 tests/readonly/018
>> create mode 100644 tests/readonly/018.out
>> create mode 100755 tests/readonly/019
>> create mode 100644 tests/readonly/019.out
>> create mode 100755 tests/readonly/020
>> create mode 100644 tests/readonly/020.out
>> create mode 100755 tests/readonly/021
>> create mode 100644 tests/readonly/021.out
>> create mode 100644 tests/readonly/Makefile
>> create mode 100644 tests/readonly/group
>> create mode 100755 tests/squashfs/001
>> create mode 100644 tests/squashfs/001.out
>> create mode 100755 tests/squashfs/002
>> create mode 100644 tests/squashfs/002.out
>> create mode 100755 tests/squashfs/003
>> create mode 100644 tests/squashfs/003.out
>> create mode 100755 tests/squashfs/004
>> create mode 100644 tests/squashfs/004.out
>> create mode 100755 tests/squashfs/005
>> create mode 100644 tests/squashfs/005.out
>> create mode 100644 tests/squashfs/Makefile
>> create mode 100644 tests/squashfs/group
>>
>> --
>> 2.16.2.dirty
>>
>
> .
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 0/6] squashfs: introduce squashfs support
2019-02-25 1:32 ` zhengbin (A)
@ 2019-02-25 5:21 ` Amir Goldstein
2019-02-25 6:45 ` Amir Goldstein
2019-03-18 12:30 ` zhengbin (A)
0 siblings, 2 replies; 16+ messages in thread
From: Amir Goldstein @ 2019-02-25 5:21 UTC (permalink / raw)
To: zhengbin (A); +Cc: Eryu Guan, Dave Chinner, fstests, Hou Tao, zhaohongjiang
On Mon, Feb 25, 2019 at 3:33 AM zhengbin (A) <zhengbin13@huawei.com> wrote:
>
> Thanks for your reply.
>
> > I don't quite like the idea of "forking" random tests from 'generic' to
> > 'readonly'. The biggest benefit of adding new fs support to fstests is
> > that it shares most of the 'generic' tests and gets good test coverage.
> > But forking a very small subset of generic tests not only defeats the
> > benefit but also adding extra maintain burden
> --->I agree that, but if we want to add readonly filesystem support in fstests,
> maybe it is the best way?I didn't find a better way
>
> On 2019/2/24 23:39, Eryu Guan wrote:
> > [Sorry for being so long to review this squashfs support.]
> >
> > On Tue, Jan 22, 2019 at 11:24:02AM +0800, zhengbin wrote:
> >> This patch add squashfs support in xfstests-dev. Add two directories
> >> in tests directory, readonly can also be used for other readonly
> >> filesystem, squashfs is just used for squashfs filesystem.
> >> tests/readonly/001 mount test
> >> tests/readonly/002--010 metadata test
> >> tests/readonly/011--018 data test
> >> tests/readonly/019--021 xattr test
> >> tests/squashfs/001--005 mksquashfs options test
> >
> > I don't quite like the idea of "forking" random tests from 'generic' to
> > 'readonly'. The biggest benefit of adding new fs support to fstests is
> > that it shares most of the 'generic' tests and gets good test coverage.
> > But forking a very small subset of generic tests not only defeats the
> > benefit but also adding extra maintain burden.
> >
> > But the problem is that squashfs is a readonly filesystem and sharing
> > the existing generic tests is not easy. (Actually I've been looking at
> > this series several times, but couldn't come out with a good solution.)
> > Because fstests harness assumes the filesystem being tested is writable
> > by default, various _require rules also write/create files to check if a
> > functionality is supported by the underlying filesystem. This leads me
> > to wonder if fstests is suitable for such readonly filesystems?
> >
> > I'm glad to hear what do others think, any comments are welcomed!
> >
Maybe the problem is not the forking of readonly tests, but the fact that
these tests cannot be shared as is with other filesystems.
I know I once fixed a bug or two when ext4 was mounted on a readonly
blockdev (i.e. with ext4 snapshots).
readonly tests could be meaningful to other filesystems if constructed as:
_require_scratch_readonly_blkdev
_scratch_blkdev_setrw
_scratch_mkfs
_scratch_mount
setup()
_scratch_umount
_scratch_blkdev_setro
_scratch_mount_readonly_blkdev
test()
Of course for squashfs, _scratch_mount will be "mounting" a
scratch tmpdir and only _scratch_mount_readonly_blkdev
will really be mounting a squashfs.
Thanks,
Amir.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 0/6] squashfs: introduce squashfs support
2019-02-25 5:21 ` Amir Goldstein
@ 2019-02-25 6:45 ` Amir Goldstein
2019-03-18 12:30 ` zhengbin (A)
1 sibling, 0 replies; 16+ messages in thread
From: Amir Goldstein @ 2019-02-25 6:45 UTC (permalink / raw)
To: zhengbin (A); +Cc: Eryu Guan, Dave Chinner, fstests, Hou Tao, zhaohongjiang
On Mon, Feb 25, 2019 at 7:21 AM Amir Goldstein <amir73il@gmail.com> wrote:
>
> On Mon, Feb 25, 2019 at 3:33 AM zhengbin (A) <zhengbin13@huawei.com> wrote:
> >
> > Thanks for your reply.
> >
> > > I don't quite like the idea of "forking" random tests from 'generic' to
> > > 'readonly'. The biggest benefit of adding new fs support to fstests is
> > > that it shares most of the 'generic' tests and gets good test coverage.
> > > But forking a very small subset of generic tests not only defeats the
> > > benefit but also adding extra maintain burden
> > --->I agree that, but if we want to add readonly filesystem support in fstests,
> > maybe it is the best way?I didn't find a better way
> >
> > On 2019/2/24 23:39, Eryu Guan wrote:
> > > [Sorry for being so long to review this squashfs support.]
> > >
> > > On Tue, Jan 22, 2019 at 11:24:02AM +0800, zhengbin wrote:
> > >> This patch add squashfs support in xfstests-dev. Add two directories
> > >> in tests directory, readonly can also be used for other readonly
> > >> filesystem, squashfs is just used for squashfs filesystem.
> > >> tests/readonly/001 mount test
> > >> tests/readonly/002--010 metadata test
> > >> tests/readonly/011--018 data test
> > >> tests/readonly/019--021 xattr test
> > >> tests/squashfs/001--005 mksquashfs options test
> > >
> > > I don't quite like the idea of "forking" random tests from 'generic' to
> > > 'readonly'. The biggest benefit of adding new fs support to fstests is
> > > that it shares most of the 'generic' tests and gets good test coverage.
> > > But forking a very small subset of generic tests not only defeats the
> > > benefit but also adding extra maintain burden.
> > >
> > > But the problem is that squashfs is a readonly filesystem and sharing
> > > the existing generic tests is not easy. (Actually I've been looking at
> > > this series several times, but couldn't come out with a good solution.)
> > > Because fstests harness assumes the filesystem being tested is writable
> > > by default, various _require rules also write/create files to check if a
> > > functionality is supported by the underlying filesystem. This leads me
> > > to wonder if fstests is suitable for such readonly filesystems?
> > >
> > > I'm glad to hear what do others think, any comments are welcomed!
> > >
>
> Maybe the problem is not the forking of readonly tests, but the fact that
> these tests cannot be shared as is with other filesystems.
> I know I once fixed a bug or two when ext4 was mounted on a readonly
> blockdev (i.e. with ext4 snapshots).
>
> readonly tests could be meaningful to other filesystems if constructed as:
> _require_scratch_readonly_blkdev
> _scratch_blkdev_setrw
> _scratch_mkfs
> _scratch_mount
> setup()
> _scratch_umount
> _scratch_blkdev_setro
> _scratch_mount_readonly_blkdev
> test()
>
> Of course for squashfs, _scratch_mount will be "mounting" a
> scratch tmpdir and only _scratch_mount_readonly_blkdev
> will really be mounting a squashfs.
>
Yet another option is to make these tests about filesystems
that require "_scratch_mkfs_from_tmpdir".
I know ext4 has this tool used for creating an Android read-only
and compact system image, not sure if e2fsprogs has a similar
functionality. I remember reading about similar functionality for
mkfs.xfs.
Some overlayfs tests might possibly be generalized with this
format, because preparing the lower layer can be replaced by
copying file from tmpdir to lower layer on _scratch_mkfs_from_tmpdir.
This could also be a direction towards supporting -overlay tests
with squashfs, which is a rather common combination in the wild
(OpenWRT AFAIK).
Thanks,
Amir.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 0/6] squashfs: introduce squashfs support
2019-02-25 5:21 ` Amir Goldstein
2019-02-25 6:45 ` Amir Goldstein
@ 2019-03-18 12:30 ` zhengbin (A)
1 sibling, 0 replies; 16+ messages in thread
From: zhengbin (A) @ 2019-03-18 12:30 UTC (permalink / raw)
To: Amir Goldstein
Cc: Eryu Guan, Dave Chinner, fstests, Hou Tao, zhaohongjiang, gaoxiang25
Hi Eryu, What is the conclusion？
May be we could use Goldstein's advice, but If we use this, all of the testcases need to be rewritten.
On 2019/2/25 13:21, Amir Goldstein wrote:
> On Mon, Feb 25, 2019 at 3:33 AM zhengbin (A) <zhengbin13@huawei.com> wrote:
>>
>> Thanks for your reply.
>>
>>> I don't quite like the idea of "forking" random tests from 'generic' to
>>> 'readonly'. The biggest benefit of adding new fs support to fstests is
>>> that it shares most of the 'generic' tests and gets good test coverage.
>>> But forking a very small subset of generic tests not only defeats the
>>> benefit but also adding extra maintain burden
>> --->I agree that, but if we want to add readonly filesystem support in fstests,
>> maybe it is the best way?I didn't find a better way
>>
>> On 2019/2/24 23:39, Eryu Guan wrote:
>>> [Sorry for being so long to review this squashfs support.]
>>>
>>> On Tue, Jan 22, 2019 at 11:24:02AM +0800, zhengbin wrote:
>>>> This patch add squashfs support in xfstests-dev. Add two directories
>>>> in tests directory, readonly can also be used for other readonly
>>>> filesystem, squashfs is just used for squashfs filesystem.
>>>> tests/readonly/001 mount test
>>>> tests/readonly/002--010 metadata test
>>>> tests/readonly/011--018 data test
>>>> tests/readonly/019--021 xattr test
>>>> tests/squashfs/001--005 mksquashfs options test
>>>
>>> I don't quite like the idea of "forking" random tests from 'generic' to
>>> 'readonly'. The biggest benefit of adding new fs support to fstests is
>>> that it shares most of the 'generic' tests and gets good test coverage.
>>> But forking a very small subset of generic tests not only defeats the
>>> benefit but also adding extra maintain burden.
>>>
>>> But the problem is that squashfs is a readonly filesystem and sharing
>>> the existing generic tests is not easy. (Actually I've been looking at
>>> this series several times, but couldn't come out with a good solution.)
>>> Because fstests harness assumes the filesystem being tested is writable
>>> by default, various _require rules also write/create files to check if a
>>> functionality is supported by the underlying filesystem. This leads me
>>> to wonder if fstests is suitable for such readonly filesystems?
>>>
>>> I'm glad to hear what do others think, any comments are welcomed!
>>>
>
> Maybe the problem is not the forking of readonly tests, but the fact that
> these tests cannot be shared as is with other filesystems.
> I know I once fixed a bug or two when ext4 was mounted on a readonly
> blockdev (i.e. with ext4 snapshots).
>
> readonly tests could be meaningful to other filesystems if constructed as:
> _require_scratch_readonly_blkdev
> _scratch_blkdev_setrw
> _scratch_mkfs
> _scratch_mount
> setup()
> _scratch_umount
> _scratch_blkdev_setro
> _scratch_mount_readonly_blkdev
> test()
>
> Of course for squashfs, _scratch_mount will be "mounting" a
> scratch tmpdir and only _scratch_mount_readonly_blkdev
> will really be mounting a squashfs.
>
> Thanks,
> Amir.
>
> .
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 0/6] squashfs: introduce squashfs support
2019-02-24 15:39 ` Eryu Guan
2019-02-25 1:32 ` zhengbin (A)
@ 2019-02-25 7:55 ` Gao Xiang
1 sibling, 0 replies; 16+ messages in thread
From: Gao Xiang @ 2019-02-25 7:55 UTC (permalink / raw)
To: Eryu Guan
Cc: zhengbin, david, fstests, houtao1, Zhaohongjiang, Chao Yu, fangwei (I)
Hi Eryu,
On 2019/2/24 23:39, Eryu Guan wrote:
> [Sorry for being so long to review this squashfs support.]
>
> On Tue, Jan 22, 2019 at 11:24:02AM +0800, zhengbin wrote:
>> This patch add squashfs support in xfstests-dev. Add two directories
>> in tests directory, readonly can also be used for other readonly
>> filesystem, squashfs is just used for squashfs filesystem.
>> tests/readonly/001 mount test
>> tests/readonly/002--010 metadata test
>> tests/readonly/011--018 data test
>> tests/readonly/019--021 xattr test
>> tests/squashfs/001--005 mksquashfs options test
>
> I don't quite like the idea of "forking" random tests from 'generic' to
> 'readonly'. The biggest benefit of adding new fs support to fstests is
> that it shares most of the 'generic' tests and gets good test coverage.
> But forking a very small subset of generic tests not only defeats the
> benefit but also adding extra maintain burden.
>
> But the problem is that squashfs is a readonly filesystem and sharing
> the existing generic tests is not easy. (Actually I've been looking at
> this series several times, but couldn't come out with a good solution.)
> Because fstests harness assumes the filesystem being tested is writable
> by default, various _require rules also write/create files to check if a
> functionality is supported by the underlying filesystem. This leads me
> to wonder if fstests is suitable for such readonly filesystems?
I'm also interested in integrating erofs support and adding specific
testcases to fstests and hoping the conclusion for read-only fses...
Thanks,
Gao Xiang
>
> I'm glad to hear what do others think, any comments are welcomed!
>
> Thanks,
> Eryu
>
>>
>> The reason of use 'readonly' directory instead of generic/shard is:
>> The step of tests in readonly filesystem(such as squashfs) are
>> as follows:
>> 1. write data in $SCRATCH_DEV
>> 2. mkfs $SCRATCH_DEV file
>> 3. mount file $SCRATCH_MNT
>> 4. test in $SCRATCH_MNT
>>
>> While the rw filesystems are as follows:
>> 1. mkfs $SCRATCH_DEV
>> 2. mount $SCRATCH_DEV $SCRATCH_MNT
>> 3. test in $SCRATCH_MNT(just write data in $SCRATCH_MNT)
>>
>> The tests in generic/shared are set as rw filesystem, it is hard
>> to use this in readonly filesystem, use 'readonly' dir which can
>> be easier to read.
>>
>> PS: As readonly filesystems need to mkfs in every test, do not
>> use TEST_DEV&TEST_DIR.
>>
>> zhengbin (6):
>> squashfs: add squashfs support
>> squashfs: add mount test
>> squashfs: add metadata test
>> squashfs: add data test
>> squashfs: add xattr test
>> squashfs: add mksquashfs options test
>>
>> .gitignore | 1 +
>> README.squashfs | 12 ++
>> check | 19 ++-
>> common/attr | 5 +
>> common/config | 6 +
>> common/rc | 63 ++++++++-
>> src/aio-dio-regress/aio-subblock-eof-read.c | 84 ++++++++++++
>> tests/readonly/001 | 97 ++++++++++++++
>> tests/readonly/001.out | 2 +
>> tests/readonly/002 | 48 +++++++
>> tests/readonly/002.out | 6 +
>> tests/readonly/003 | 72 +++++++++++
>> tests/readonly/003.out | 5 +
>> tests/readonly/004 | 50 +++++++
>> tests/readonly/004.out | 3 +
>> tests/readonly/005 | 77 +++++++++++
>> tests/readonly/005.out | 2 +
>> tests/readonly/006 | 48 +++++++
>> tests/readonly/006.out | 4 +
>> tests/readonly/007 | 74 +++++++++++
>> tests/readonly/007.out | 9 ++
>> tests/readonly/008 | 193 ++++++++++++++++++++++++++++
>> tests/readonly/008.out | 34 +++++
>> tests/readonly/009 | 50 +++++++
>> tests/readonly/009.out | 2 +
>> tests/readonly/010 | 49 +++++++
>> tests/readonly/010.out | 4 +
>> tests/readonly/011 | 92 +++++++++++++
>> tests/readonly/011.out | 30 +++++
>> tests/readonly/012 | 56 ++++++++
>> tests/readonly/012.out | 5 +
>> tests/readonly/013 | 47 +++++++
>> tests/readonly/013.out | 2 +
>> tests/readonly/014 | 46 +++++++
>> tests/readonly/014.out | 2 +
>> tests/readonly/015 | 42 ++++++
>> tests/readonly/015.out | 2 +
>> tests/readonly/016 | 145 +++++++++++++++++++++
>> tests/readonly/016.out | 8 ++
>> tests/readonly/017 | 107 +++++++++++++++
>> tests/readonly/017.out | 2 +
>> tests/readonly/018 | 49 +++++++
>> tests/readonly/018.out | 2 +
>> tests/readonly/019 | 109 ++++++++++++++++
>> tests/readonly/019.out | 45 +++++++
>> tests/readonly/020 | 56 ++++++++
>> tests/readonly/020.out | 9 ++
>> tests/readonly/021 | 74 +++++++++++
>> tests/readonly/021.out | 11 ++
>> tests/readonly/Makefile | 20 +++
>> tests/readonly/group | 26 ++++
>> tests/squashfs/001 | 60 +++++++++
>> tests/squashfs/001.out | 9 ++
>> tests/squashfs/002 | 40 ++++++
>> tests/squashfs/002.out | 2 +
>> tests/squashfs/003 | 55 ++++++++
>> tests/squashfs/003.out | 12 ++
>> tests/squashfs/004 | 73 +++++++++++
>> tests/squashfs/004.out | 23 ++++
>> tests/squashfs/005 | 54 ++++++++
>> tests/squashfs/005.out | 13 ++
>> tests/squashfs/Makefile | 20 +++
>> tests/squashfs/group | 10 ++
>> 63 files changed, 2372 insertions(+), 5 deletions(-)
>> create mode 100644 README.squashfs
>> create mode 100644 src/aio-dio-regress/aio-subblock-eof-read.c
>> create mode 100755 tests/readonly/001
>> create mode 100644 tests/readonly/001.out
>> create mode 100755 tests/readonly/002
>> create mode 100644 tests/readonly/002.out
>> create mode 100755 tests/readonly/003
>> create mode 100644 tests/readonly/003.out
>> create mode 100755 tests/readonly/004
>> create mode 100644 tests/readonly/004.out
>> create mode 100755 tests/readonly/005
>> create mode 100644 tests/readonly/005.out
>> create mode 100755 tests/readonly/006
>> create mode 100644 tests/readonly/006.out
>> create mode 100755 tests/readonly/007
>> create mode 100644 tests/readonly/007.out
>> create mode 100755 tests/readonly/008
>> create mode 100644 tests/readonly/008.out
>> create mode 100755 tests/readonly/009
>> create mode 100644 tests/readonly/009.out
>> create mode 100755 tests/readonly/010
>> create mode 100644 tests/readonly/010.out
>> create mode 100755 tests/readonly/011
>> create mode 100644 tests/readonly/011.out
>> create mode 100755 tests/readonly/012
>> create mode 100644 tests/readonly/012.out
>> create mode 100755 tests/readonly/013
>> create mode 100644 tests/readonly/013.out
>> create mode 100755 tests/readonly/014
>> create mode 100644 tests/readonly/014.out
>> create mode 100755 tests/readonly/015
>> create mode 100644 tests/readonly/015.out
>> create mode 100755 tests/readonly/016
>> create mode 100644 tests/readonly/016.out
>> create mode 100755 tests/readonly/017
>> create mode 100644 tests/readonly/017.out
>> create mode 100755 tests/readonly/018
>> create mode 100644 tests/readonly/018.out
>> create mode 100755 tests/readonly/019
>> create mode 100644 tests/readonly/019.out
>> create mode 100755 tests/readonly/020
>> create mode 100644 tests/readonly/020.out
>> create mode 100755 tests/readonly/021
>> create mode 100644 tests/readonly/021.out
>> create mode 100644 tests/readonly/Makefile
>> create mode 100644 tests/readonly/group
>> create mode 100755 tests/squashfs/001
>> create mode 100644 tests/squashfs/001.out
>> create mode 100755 tests/squashfs/002
>> create mode 100644 tests/squashfs/002.out
>> create mode 100755 tests/squashfs/003
>> create mode 100644 tests/squashfs/003.out
>> create mode 100755 tests/squashfs/004
>> create mode 100644 tests/squashfs/004.out
>> create mode 100755 tests/squashfs/005
>> create mode 100644 tests/squashfs/005.out
>> create mode 100644 tests/squashfs/Makefile
>> create mode 100644 tests/squashfs/group
>>
>> --
>> 2.16.2.dirty
>>
^ permalink raw reply [flat|nested] 16+ messages in thread