[U-Boot] [PATCH v1 0/4] Enable DM USB support (host and gadget) and full RNDIS boot flow

[U-Boot] [PATCH v1 0/4] Enable DM USB support (host and gadget) and full RNDIS boot flow

[Jean-Jacques Hiblot]

The AM335x is able to get its SPL using a RNDIS connection. The goal of
this series is to make this feature available out of the box for the
am335x-evm
There is already a defconfig to handle this use case, but with DM USB
it becomes easy to activate the feature in the main defconfig. So the last
patch of the series actually removes the defconfig specially crafted for
the RNDIS boot flow.

Details on host setup are available there:
http://processors.wiki.ti.com/index.php/Linux_Core_U-Boot_User%27s_Guide#Booting_U-Boot_from_the_network


Jean-Jacques Hiblot (4):
  usb: ether: call _usb_eth_halt() if initialization fails
  ARM: DTS: am335x-evm: Use USB0 in peripheral mode
  configs: am335x_evm: enable DM_USB_GADGET and USB_ETHER in u-boot and
    SPL
  configs: removing am335x_evm_usbspl_defconfig

 arch/arm/dts/am335x-evm-u-boot.dtsi |  4 +++
 configs/am335x_evm_defconfig        |  8 ++++-
 configs/am335x_evm_usbspl_defconfig | 55 -----------------------------
 drivers/usb/gadget/ether.c          |  5 ++-
 4 files changed, 15 insertions(+), 57 deletions(-)
 delete mode 100644 configs/am335x_evm_usbspl_defconfig

-- 
2.17.1

[U-Boot] [PATCH v1 1/4] usb: ether: call _usb_eth_halt() if initialization fails

[Jean-Jacques Hiblot]

If the host does not respond in time, the initialization fails. However
the usb ether driver will still be registered. This will make
usb_gadget_probe_driver() fail the next time the initialization is
attempted because it cannot find an available UDC.

Fixing this by calling _usb_eth_halt() when the init fails.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
---

 drivers/usb/gadget/ether.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 3b3d9af681..57edaa3ac8 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2333,6 +2333,8 @@ fail:
 }
 
 /*-------------------------------------------------------------------------*/
+static void _usb_eth_halt(struct ether_priv *priv);
+
 static int _usb_eth_init(struct ether_priv *priv)
 {
 	struct eth_dev *dev = &priv->ethdev;
@@ -2406,6 +2408,7 @@ static int _usb_eth_init(struct ether_priv *priv)
 	rx_submit(dev, dev->rx_req, 0);
 	return 0;
 fail:
+	_usb_eth_halt(priv);
 	return -1;
 }
 
@@ -2485,7 +2488,7 @@ static int _usb_eth_recv(struct ether_priv *priv)
 	return 0;
 }
 
-void _usb_eth_halt(struct ether_priv *priv)
+static void _usb_eth_halt(struct ether_priv *priv)
 {
 	struct eth_dev *dev = &priv->ethdev;
 
-- 
2.17.1

[U-Boot] [PATCH v1 2/4] ARM: DTS: am335x-evm: Use USB0 in peripheral mode

[Jean-Jacques Hiblot]

This USB port is mainly used for RNDIS and DFU. To be able to use it with
DM_USB and DM_USB_GADGET, we need to provide a dr_mode value in the DTS.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
---

 arch/arm/dts/am335x-evm-u-boot.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/am335x-evm-u-boot.dtsi b/arch/arm/dts/am335x-evm-u-boot.dtsi
index 0341600342..b6b97ed16d 100644
--- a/arch/arm/dts/am335x-evm-u-boot.dtsi
+++ b/arch/arm/dts/am335x-evm-u-boot.dtsi
@@ -7,3 +7,7 @@
 &mmc3 {
 	status = "disabled";
 };
+
+&usb0 {
+	dr_mode = "peripheral";
+};
-- 
2.17.1

[U-Boot] [PATCH v1 3/4] configs: am335x_evm: enable DM_USB_GADGET and USB_ETHER in u-boot and SPL

[Jean-Jacques Hiblot]

The AM335x ROM boot is able to download the SPL from a RNDIS connection
on USB0. To enable a full RNDIS boot flow (romboot -> SPL -> u-boot -> ..),
we can use USB_ETHER in SPL and u-boot.
However this increase the size of the SPL past its limit. So removing the
unused SPL_EXT_SUPPORT.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
---

 configs/am335x_evm_defconfig | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index 21c5bdb83e..4b22c19dfb 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -10,9 +10,14 @@ CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run f
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_ARCH_MISC_INIT=y
+# CONFIG_SPL_EXT_SUPPORT is not set
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_MUSB_NEW_SUPPORT=y
+CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET_VCI_STRING="AM33xx U-Boot SPL"
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_ETHER=y
 CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_NAND_OFS=0x00080000
 # CONFIG_CMD_FLASH is not set
@@ -51,7 +56,8 @@ CONFIG_TIMER=y
 CONFIG_OMAP_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
-# CONFIG_SPL_DM_USB is not set
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
-- 
2.17.1

[U-Boot] [PATCH v1 4/4] configs: removing am335x_evm_usbspl_defconfig

[Jean-Jacques Hiblot]

This feature is now supported by the main config for am335x_evm:
am335x_evm_defconfig

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>

---

 configs/am335x_evm_usbspl_defconfig | 55 -----------------------------
 1 file changed, 55 deletions(-)
 delete mode 100644 configs/am335x_evm_usbspl_defconfig

diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig
deleted file mode 100644
index bda1785e7e..0000000000
--- a/configs/am335x_evm_usbspl_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_AM33XX=y
-CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_ANDROID_BOOT_IMAGE is not set
-CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_SPL_MUSB_NEW_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
-CONFIG_SPL_NET_SUPPORT=y
-CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL"
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_USB_GADGET=y
-CONFIG_SPL_USB_ETHER=y
-# CONFIG_SPL_YMODEM_SUPPORT is not set
-CONFIG_CMD_SPL=y
-CONFIG_CMD_SPL_NAND_OFS=0x00080000
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)"
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_NETCONSOLE=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_NAND=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_MII=y
-CONFIG_DRIVER_TI_CPSW=y
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_GADGET=y
-CONFIG_USB_MUSB_DSPS=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
-CONFIG_USB_ETHER=y
-CONFIG_LZO=y
-CONFIG_OF_LIBFDT=y
-- 
2.17.1

[U-Boot] [PATCH v1 3/4] configs: am335x_evm: enable DM_USB_GADGET and USB_ETHER in u-boot and SPL

[Tom Rini]

On Tue, Jan 22, 2019 at 04:48:18PM +0100, Jean-Jacques Hiblot wrote:

> The AM335x ROM boot is able to download the SPL from a RNDIS connection
> on USB0. To enable a full RNDIS boot flow (romboot -> SPL -> u-boot -> ..),
> we can use USB_ETHER in SPL and u-boot.
> However this increase the size of the SPL past its limit. So removing the
> unused SPL_EXT_SUPPORT.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>

Since I don't _think_ anyone ever ended up making use of extN support in
SPL (even for Falcon mode) I guess this is an OK choice for the "kitchen
sink" config.

Reviewed-by: Tom Rini <trini@konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190122/1f660ab7/attachment.sig>

[U-Boot] [PATCH v1 2/4] ARM: DTS: am335x-evm: Use USB0 in peripheral mode

[Tom Rini]

On Tue, Jan 22, 2019 at 04:48:17PM +0100, Jean-Jacques Hiblot wrote:

> This USB port is mainly used for RNDIS and DFU. To be able to use it with
> DM_USB and DM_USB_GADGET, we need to provide a dr_mode value in the DTS.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190122/1446e91b/attachment.sig>

[U-Boot] [PATCH v1 4/4] configs: removing am335x_evm_usbspl_defconfig

[Tom Rini]

On Tue, Jan 22, 2019 at 04:48:19PM +0100, Jean-Jacques Hiblot wrote:

> This feature is now supported by the main config for am335x_evm:
> am335x_evm_defconfig
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> 

Reviewed-by: Tom Rini <trini@konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190122/efeeaa5d/attachment.sig>

[U-Boot] [PATCH v1 1/4] usb: ether: call _usb_eth_halt() if initialization fails

[Lukasz Majewski]

Hi Jean-Jacques,

> If the host does not respond in time, the initialization fails.
> However the usb ether driver will still be registered. This will make
> usb_gadget_probe_driver() fail the next time the initialization is
> attempted because it cannot find an available UDC.
> 
> Fixing this by calling _usb_eth_halt() when the init fails.

Acked-by: Lukasz Majewski <lukma@denx.de>

> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> ---
> 
>  drivers/usb/gadget/ether.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
> index 3b3d9af681..57edaa3ac8 100644
> --- a/drivers/usb/gadget/ether.c
> +++ b/drivers/usb/gadget/ether.c
> @@ -2333,6 +2333,8 @@ fail:
>  }
>  
>  /*-------------------------------------------------------------------------*/
> +static void _usb_eth_halt(struct ether_priv *priv);
> +
>  static int _usb_eth_init(struct ether_priv *priv)
>  {
>  	struct eth_dev *dev = &priv->ethdev;
> @@ -2406,6 +2408,7 @@ static int _usb_eth_init(struct ether_priv
> *priv) rx_submit(dev, dev->rx_req, 0);
>  	return 0;
>  fail:
> +	_usb_eth_halt(priv);
>  	return -1;
>  }
>  
> @@ -2485,7 +2488,7 @@ static int _usb_eth_recv(struct ether_priv
> *priv) return 0;
>  }
>  
> -void _usb_eth_halt(struct ether_priv *priv)
> +static void _usb_eth_halt(struct ether_priv *priv)
>  {
>  	struct eth_dev *dev = &priv->ethdev;
>  




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190122/db0191c0/attachment.sig>

[U-Boot] [U-Boot, v1, 1/4] usb: ether: call _usb_eth_halt() if initialization fails

[Tom Rini]

On Tue, Jan 22, 2019 at 04:48:16PM +0100, Jean-Jacques Hiblot wrote:

> If the host does not respond in time, the initialization fails. However
> the usb ether driver will still be registered. This will make
> usb_gadget_probe_driver() fail the next time the initialization is
> attempted because it cannot find an available UDC.
> 
> Fixing this by calling _usb_eth_halt() when the init fails.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> Acked-by: Lukasz Majewski <lukma@denx.de>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190202/d7d2abde/attachment.sig>

[U-Boot] [U-Boot, v1, 2/4] ARM: DTS: am335x-evm: Use USB0 in peripheral mode

[Tom Rini]

On Tue, Jan 22, 2019 at 04:48:17PM +0100, Jean-Jacques Hiblot wrote:

> This USB port is mainly used for RNDIS and DFU. To be able to use it with
> DM_USB and DM_USB_GADGET, we need to provide a dr_mode value in the DTS.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190202/3baaecc9/attachment.sig>

[U-Boot] [U-Boot, v1, 3/4] configs: am335x_evm: enable DM_USB_GADGET and USB_ETHER in u-boot and SPL

[Tom Rini]

On Tue, Jan 22, 2019 at 04:48:18PM +0100, Jean-Jacques Hiblot wrote:

> The AM335x ROM boot is able to download the SPL from a RNDIS connection
> on USB0. To enable a full RNDIS boot flow (romboot -> SPL -> u-boot -> ..),
> we can use USB_ETHER in SPL and u-boot.
> However this increase the size of the SPL past its limit. So removing the
> unused SPL_EXT_SUPPORT.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190202/d45e42d6/attachment.sig>

[U-Boot] [U-Boot, v1, 4/4] configs: removing am335x_evm_usbspl_defconfig

[Tom Rini]

On Tue, Jan 22, 2019 at 04:48:19PM +0100, Jean-Jacques Hiblot wrote:

> This feature is now supported by the main config for am335x_evm:
> am335x_evm_defconfig
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190202/0d814c8d/attachment.sig>