From: Anup Patel <Anup.Patel@wdc.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 00/12] SiFive FU540 Support
Date: Wed, 23 Jan 2019 04:25:18 +0000 [thread overview]
Message-ID: <20190123042442.106038-1-anup.patel@wdc.com> (raw)
From: Anup Patel <anup@brainfault.org>
This patchset adds SiFive Freedom Unleashed (FU540) support
to RISC-V U-Boot.
The patches are based upon latest RISC-V U-Boot tree
(git://git.denx.de/u-boot-riscv.git) at commit id
91882c472d8c0aef4db699d3f2de55bf43d4ae4b
All drivers namely: SiFive PRCI, SiFive Serial, and Cadance
MACB Ethernet work fine on actual SiFive Unleashed board and
QEMU sifive_u machine.
Changes since v2:
- Fixed typo in PATCH3 comments
- Removed "#if" from clk_fixed_factor_ofdata_to_platdata() in PATCH7
- Added PATCH12 for SiFive FU540 README guide
Changes since v1:
- Re-ordered SoB in patches with multiple SoB
- Simplified board_get_usable_ram_top() added by PATCH3
Anup Patel (7):
riscv: Rename cpu/qemu to cpu/generic
riscv: Add asm/dma-mapping.h for DMA mappings
riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
net: macb: Fix clk API usage for RISC-V systems
clk: Add SiFive FU540 PRCI clock driver
clk: Add fixed-factor clock driver
riscv: Add SiFive FU540 board support
Atish Patra (5):
net: macb: Fix GEM hardware detection
drivers: serial_sifive: Fix baud rate calculation
drivers: serial_sifive: Skip baudrate config if no input clock
cpu: Bind timer driver for boot hart
doc: Add a readme guide for SiFive FU540
arch/riscv/Kconfig | 6 +-
arch/riscv/cpu/{qemu => generic}/Kconfig | 2 +-
arch/riscv/cpu/{qemu => generic}/Makefile | 0
arch/riscv/cpu/{qemu => generic}/cpu.c | 0
arch/riscv/cpu/generic/dram.c | 37 ++
arch/riscv/cpu/qemu/dram.c | 17 -
arch/riscv/include/asm/dma-mapping.h | 38 ++
board/emulation/qemu-riscv/Kconfig | 4 +-
.../qemu-riscv => sifive/fu540}/Kconfig | 36 +-
board/sifive/fu540/MAINTAINERS | 9 +
board/sifive/fu540/Makefile | 5 +
board/sifive/fu540/fu540.c | 17 +
configs/sifive_fu540_defconfig | 11 +
doc/README.sifive-fu540 | 302 +++++++++
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 5 +-
drivers/clk/clk_fixed_factor.c | 72 +++
drivers/clk/sifive/Kconfig | 19 +
drivers/clk/sifive/Makefile | 5 +
.../clk/sifive/analogbits-wrpll-cln28hpc.h | 101 +++
drivers/clk/sifive/fu540-prci.c | 604 ++++++++++++++++++
drivers/clk/sifive/wrpll-cln28hpc.c | 390 +++++++++++
drivers/cpu/riscv_cpu.c | 7 +-
drivers/net/macb.c | 6 +-
drivers/serial/serial_sifive.c | 60 +-
include/configs/sifive-fu540.h | 43 ++
include/dt-bindings/clk/sifive-fu540-prci.h | 29 +
27 files changed, 1765 insertions(+), 61 deletions(-)
rename arch/riscv/cpu/{qemu => generic}/Kconfig (91%)
rename arch/riscv/cpu/{qemu => generic}/Makefile (100%)
rename arch/riscv/cpu/{qemu => generic}/cpu.c (100%)
create mode 100644 arch/riscv/cpu/generic/dram.c
delete mode 100644 arch/riscv/cpu/qemu/dram.c
create mode 100644 arch/riscv/include/asm/dma-mapping.h
copy board/{emulation/qemu-riscv => sifive/fu540}/Kconfig (57%)
create mode 100644 board/sifive/fu540/MAINTAINERS
create mode 100644 board/sifive/fu540/Makefile
create mode 100644 board/sifive/fu540/fu540.c
create mode 100644 configs/sifive_fu540_defconfig
create mode 100644 doc/README.sifive-fu540
create mode 100644 drivers/clk/clk_fixed_factor.c
create mode 100644 drivers/clk/sifive/Kconfig
create mode 100644 drivers/clk/sifive/Makefile
create mode 100644 drivers/clk/sifive/analogbits-wrpll-cln28hpc.h
create mode 100644 drivers/clk/sifive/fu540-prci.c
create mode 100644 drivers/clk/sifive/wrpll-cln28hpc.c
create mode 100644 include/configs/sifive-fu540.h
create mode 100644 include/dt-bindings/clk/sifive-fu540-prci.h
--
2.17.1
next reply other threads:[~2019-01-23 4:25 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-23 4:25 Anup Patel [this message]
2019-01-23 4:25 ` [U-Boot] [PATCH v3 01/12] riscv: Rename cpu/qemu to cpu/generic Anup Patel
2019-01-23 4:25 ` [U-Boot] [PATCH v3 02/12] riscv: Add asm/dma-mapping.h for DMA mappings Anup Patel
2019-01-23 4:25 ` [U-Boot] [PATCH v3 03/12] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems Anup Patel
2019-01-23 4:25 ` [U-Boot] [PATCH v3 04/12] net: macb: Fix clk API usage for RISC-V systems Anup Patel
2019-01-23 13:57 ` Joe Hershberger
2019-01-23 15:40 ` Anup Patel
2019-01-23 4:25 ` [U-Boot] [PATCH v3 05/12] net: macb: Fix GEM hardware detection Anup Patel
2019-01-23 13:55 ` Joe Hershberger
2019-01-23 4:25 ` [U-Boot] [PATCH v3 06/12] clk: Add SiFive FU540 PRCI clock driver Anup Patel
2019-01-23 4:25 ` [U-Boot] [PATCH v3 07/12] clk: Add fixed-factor " Anup Patel
2019-01-23 4:26 ` [U-Boot] [PATCH v3 08/12] drivers: serial_sifive: Fix baud rate calculation Anup Patel
2019-01-23 4:26 ` [U-Boot] [PATCH v3 09/12] drivers: serial_sifive: Skip baudrate config if no input clock Anup Patel
2019-01-23 4:26 ` [U-Boot] [PATCH v3 10/12] cpu: Bind timer driver for boot hart Anup Patel
2019-01-23 4:26 ` [U-Boot] [PATCH v3 11/12] riscv: Add SiFive FU540 board support Anup Patel
2019-01-23 4:26 ` [U-Boot] [PATCH v3 12/12] doc: Add a readme guide for SiFive FU540 Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190123042442.106038-1-anup.patel@wdc.com \
--to=anup.patel@wdc.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.