From: Andre Przywara <andre.przywara@arm.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 8/9] arm: sunxi: Enable DM_MMC
Date: Tue, 29 Jan 2019 15:54:15 +0000 [thread overview]
Message-ID: <20190129155416.116919-9-andre.przywara@arm.com> (raw)
In-Reply-To: <20190129155416.116919-1-andre.przywara@arm.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Enable DM_MMC for all Allwinner SoCs, this will eventually
enable BLK.
Also removed DM_MMC enablement in few parts of sunxi
configurations.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-sunxi/Kconfig | 1 -
configs/Linksprite_pcDuino3_defconfig | 1 -
3 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cefa8f40d0..f0edb10003 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -851,6 +851,7 @@ config ARCH_SUNXI
select DM_ETH
select DM_GPIO
select DM_KEYBOARD
+ select DM_MMC if MMC
select DM_SERIAL
select DM_USB if DISTRO_DEFAULTS
select OF_BOARD_SETUP
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 3c54f5106d..74e234cded 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -154,7 +154,6 @@ config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7A
select ARM_CORTEX_CPU_IS_UP
- select DM_MMC if MMC
select DM_SCSI if SCSI
select PHY_SUN4I_USB
select DRAM_SUN4I
diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
index 9156f132d1..18f658e96b 100644
--- a/configs/Linksprite_pcDuino3_defconfig
+++ b/configs/Linksprite_pcDuino3_defconfig
@@ -14,7 +14,6 @@ CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
CONFIG_SCSI_AHCI=y
-CONFIG_DM_MMC=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
--
2.17.1
next prev parent reply other threads:[~2019-01-29 15:54 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-29 15:54 [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC Andre Przywara
2019-01-29 15:54 ` [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices Andre Przywara
2019-01-29 18:10 ` Jagan Teki
2019-01-29 18:16 ` Andre Przywara
2019-01-29 18:26 ` Jagan Teki
2019-01-30 10:33 ` Andre Przywara
2019-01-30 10:38 ` Jagan Teki
2019-01-30 10:55 ` Andre Przywara
2019-01-30 12:46 ` Jagan Teki
2019-01-30 13:42 ` Andre Przywara
2019-01-30 14:19 ` Jagan Teki
2019-01-30 14:31 ` Andre Przywara
2019-01-30 14:47 ` Jagan Teki
2019-01-30 16:13 ` Andre Przywara
2019-01-30 16:24 ` Jagan Teki
2019-01-29 15:54 ` [U-Boot] [PATCH v4 2/9] sunxi: clk: add MMC gates/resets Andre Przywara
2019-01-29 18:02 ` Jagan Teki
2019-01-29 15:54 ` [U-Boot] [PATCH v4 3/9] sunxi: clk: A80: add MMC clock support Andre Przywara
2019-01-29 18:04 ` Jagan Teki
2019-01-29 18:13 ` Jagan Teki
2019-01-29 15:54 ` [U-Boot] [PATCH v4 4/9] mmc: sunxi: Add remaining compatible strings Andre Przywara
2019-01-29 18:08 ` Jagan Teki
2019-01-29 15:54 ` [U-Boot] [PATCH v4 5/9] mmc: sunxi: Add DM_MMC support for H6 Andre Przywara
2019-01-29 18:08 ` Jagan Teki
2019-01-29 15:54 ` [U-Boot] [PATCH v4 6/9] mmc: sunxi: Add DM clk and reset support Andre Przywara
2019-01-29 18:14 ` Jagan Teki
2019-01-29 15:54 ` [U-Boot] [PATCH v4 7/9] sunxi: board: do MMC pinmux setup for DM_MMC builds Andre Przywara
2019-01-29 18:17 ` Jagan Teki
2019-01-29 15:54 ` Andre Przywara [this message]
2019-01-29 15:54 ` [U-Boot] [PATCH v4 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1 Andre Przywara
2019-01-29 17:42 ` [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC Jagan Teki
2019-01-29 17:49 ` Andre Przywara
2019-01-29 17:53 ` Jagan Teki
2019-01-30 10:16 ` Tomas Novotny
2019-01-30 11:46 ` Andre Przywara
2019-01-30 12:50 ` Jagan Teki
2019-01-30 13:56 ` Andre Przywara
2019-01-30 13:35 ` Tomas Novotny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190129155416.116919-9-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.