From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Marco Felsch Subject: [PATCH v4 2/7] media: tvp5150: add input source selection of_graph support Date: Tue, 29 Jan 2019 17:07:52 +0100 Message-Id: <20190129160757.2314-3-m.felsch@pengutronix.de> In-Reply-To: <20190129160757.2314-1-m.felsch@pengutronix.de> References: <20190129160757.2314-1-m.felsch@pengutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit To: mchehab@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, sakari.ailus@linux.intel.com Cc: devicetree@vger.kernel.org, p.zabel@pengutronix.de, javierm@redhat.com, afshin.nasser@gmail.com, laurent.pinchart@ideasonboard.com, linux-media@vger.kernel.org, kernel@pengutronix.de List-ID: This patch adds the of_graph support to describe the tvp connections. Physical the TVP5150 has three ports: AIP1A, AIP1B and YOUT. As result of discussion [1],[2] the device-tree maps these ports 1:1. The svideo connector must be conneted to port@0/endpoint@1, look at the Documentation for more information. Since the TVP5150 is a converter the device-tree must contain at least 1-input and 1-output port. The mc-connectors and mc-links are only created if the device-tree contains the corresponding connector nodes. If more than one connector is available the media_entity_operations.link_setup() callback ensures that only one connector is active. [1] https://www.spinics.net/lists/linux-media/msg138545.html [2] https://www.spinics.net/lists/linux-media/msg138546.html Signed-off-by: Marco Felsch --- Changelog: v4: - rebase on top of media_tree/master, fix merge conflict due to commit 60359a28d592 ("media: v4l: fwnode: Initialise the V4L2 fwnode endpoints to zero") v3: - probe(): s/err/err_free_v4l2_ctrls - drop MC dependency for tvp5150_pads v2: - adapt commit message - unify ifdef switches - rename tvp5150_valid_input -> tvp5150_of_valid_input, to be more precise - mc: use 2-input and 1-output pad - mc: link svideo connector to both input pads - mc: enable/disable svideo links in one go - mc: change link_setup() behaviour, switch the input src don't require a explicite disable before. - mc: rename 'local' media_pad param to tvp5150_pad to avoid confusion - mc: enable link to the first available connector and set the corresponding tvp5150 input src per default during registered() - mc/of: factor out oftree connector allocation - of: drop svideo dt port - of: move svideo connector to port@0/endpoint@1 - of: require at least 1-in and 1-out endpoint drivers/media/i2c/tvp5150.c | 481 +++++++++++++++++++++++++++++++++--- 1 file changed, 442 insertions(+), 39 deletions(-) diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c index 89da921c8886..a89b83f69266 100644 --- a/drivers/media/i2c/tvp5150.c +++ b/drivers/media/i2c/tvp5150.c @@ -44,15 +44,38 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)"); #define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg) enum tvp5150_pads { - TVP5150_PAD_IF_INPUT, + TVP5150_PAD_AIP1A = TVP5150_COMPOSITE0, + TVP5150_PAD_AIP1B, TVP5150_PAD_VID_OUT, TVP5150_NUM_PADS }; +#if defined(CONFIG_MEDIA_CONTROLLER) +enum tvp5150_pads_state { + TVP5150_PAD_INACTIVE, + TVP5150_PAD_ACTIVE_COMPOSITE, + TVP5150_PAD_ACTIVE_SVIDEO, +}; + +struct tvp5150_connector { + struct media_entity ent; + struct media_pad pad; + unsigned int port_num; + bool is_svideo; +}; +#endif + struct tvp5150 { struct v4l2_subdev sd; -#ifdef CONFIG_MEDIA_CONTROLLER + /* additional additional endpoint for the svideo connector */ + struct device_node *endpoints[TVP5150_NUM_PADS + 1]; + unsigned int endpoints_num; +#if defined(CONFIG_MEDIA_CONTROLLER) struct media_pad pads[TVP5150_NUM_PADS]; + int pads_state[TVP5150_NUM_PADS]; + struct tvp5150_connector *connectors; + int connectors_num; + bool modify_second_link; #endif struct v4l2_ctrl_handler hdl; struct v4l2_rect rect; @@ -1167,6 +1190,160 @@ static int tvp5150_enum_frame_size(struct v4l2_subdev *sd, return 0; } +/**************************************************************************** + * Media entity ops + ****************************************************************************/ +#if defined(CONFIG_MEDIA_CONTROLLER) +static int tvp5150_active_pad_idx(struct tvp5150 *decoder) +{ + int *pad_state = &decoder->pads_state[0]; + int i, idx = -1; + + for (i = 0; i < TVP5150_NUM_PADS - 1; i++) { + if ((pad_state[i] == TVP5150_PAD_ACTIVE_COMPOSITE) || + (pad_state[i] == TVP5150_PAD_ACTIVE_SVIDEO)) { + idx = i; + break; + } + } + + return idx; +} + +static int tvp5150_active_svideo_links(struct tvp5150 *decoder) +{ + int *pad_state = &decoder->pads_state[0]; + int i, links = 0; + + for (i = 0; i < TVP5150_NUM_PADS - 1; i++) + if (pad_state[i] == TVP5150_PAD_ACTIVE_SVIDEO) + links++; + + return links; +} + +static int tvp5150_modify_link(struct tvp5150 *decoder, unsigned int pad_idx, + struct media_pad *pad, int flags) +{ + struct media_pad *src_pad; + struct media_link *link; + + if (pad) + src_pad = pad; + else + src_pad = media_entity_remote_pad(&decoder->pads[pad_idx]); + + if (!src_pad) + return -1; + + link = media_entity_find_link(src_pad, + &decoder->pads[pad_idx]); + + /* + * Don't use locked version, since we are running already within the + * media_entity_setup_link() context. + */ + return __media_entity_setup_link(link, flags); + +} + +static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, + u32 config); + +static int tvp5150_link_setup(struct media_entity *entity, + const struct media_pad *tvp5150_pad, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct tvp5150 *decoder = to_tvp5150(sd); + int *pad_state = &decoder->pads_state[0]; + int i, active_pad, ret = 0; + bool is_svideo = false; + + /* + * The tvp state is determined by the enabled sink pad link. + * Enabling or disabling the source pad link has no effect. + */ + if (tvp5150_pad->flags & MEDIA_PAD_FL_SOURCE) + return 0; + + /* check if the svideo connector should be enabled */ + for (i = 0; i < decoder->connectors_num; i++) { + if (remote->entity == &decoder->connectors[i].ent) { + is_svideo = decoder->connectors[i].is_svideo; + break; + } + } + + /* check if there is already a enabled svideo link and determine pad */ + active_pad = tvp5150_active_pad_idx(decoder); + + dev_dbg(sd->dev, "link setup '%s':%d->'%s':%d[%d]", + remote->entity->name, remote->index, tvp5150_pad->entity->name, + tvp5150_pad->index, flags & MEDIA_LNK_FL_ENABLED); + + if (flags & MEDIA_LNK_FL_ENABLED) { + if (active_pad >= 0 && !decoder->modify_second_link) + tvp5150_modify_link(decoder, active_pad, NULL, 0); + + dev_dbg(sd->dev, "Setting %d active [%s]\n", tvp5150_pad->index, + is_svideo ? "svideo" : "composite"); + pad_state[tvp5150_pad->index] = + is_svideo ? TVP5150_PAD_ACTIVE_SVIDEO : + TVP5150_PAD_ACTIVE_COMPOSITE; + + if (is_svideo) { + if (tvp5150_active_svideo_links(decoder) < 2) { + unsigned int idx = tvp5150_pad->index ^ 1; + + decoder->modify_second_link = true; + tvp5150_modify_link(decoder, idx, + (struct media_pad *)remote, + MEDIA_LNK_FL_ENABLED); + } else { + decoder->modify_second_link = false; + tvp5150_s_routing(sd, TVP5150_SVIDEO, + TVP5150_NORMAL, 0); + } + } else { + tvp5150_s_routing(sd, tvp5150_pad->index, + TVP5150_NORMAL, 0); + } + } else { + /* + * Svideo streams on two pads and user can request to AIP1A or + * AIP1B pad. In either case both pads gets disabled in in go. + * So check only if user wants to disable a not enabled + * composite pad. + */ + if (!is_svideo && tvp5150_pad->index != active_pad) + goto out; + + dev_dbg(sd->dev, "going inactive\n"); + pad_state[tvp5150_pad->index] = TVP5150_PAD_INACTIVE; + + /* in case of svideo we need to disable the second pad too */ + if (tvp5150_active_svideo_links(decoder) > 0) { + unsigned int idx = tvp5150_pad->index ^ 1; + + decoder->modify_second_link = true; + tvp5150_modify_link(decoder, idx, + (struct media_pad *)remote, 0); + } + + if (!decoder->modify_second_link) + tvp5150_s_routing(sd, is_svideo ? TVP5150_SVIDEO : + active_pad, TVP5150_BLACK_SCREEN, 0); + decoder->modify_second_link = false; + } +out: + return ret; +} + +static const struct media_entity_operations tvp5150_sd_media_ops = { + .link_setup = tvp5150_link_setup, +}; +#endif /**************************************************************************** I2C Command ****************************************************************************/ @@ -1314,6 +1491,76 @@ static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) return 0; } +static int tvp5150_registered(struct v4l2_subdev *sd) +{ +#if defined(CONFIG_MEDIA_CONTROLLER) + struct tvp5150 *decoder = to_tvp5150(sd); + unsigned int i; + int ret; + + /* + * Setup connector pads and links. Enable the link to the first + * available connector per default. + */ + for (i = 0; i < decoder->connectors_num; i++) { + struct media_entity *con = &decoder->connectors[i].ent; + struct media_pad *pad = &decoder->connectors[i].pad; + unsigned int port = decoder->connectors[i].port_num; + bool is_svideo = decoder->connectors[i].is_svideo; + int flags = i ? 0 : MEDIA_LNK_FL_ENABLED; + + pad->flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_pads_init(con, 1, pad); + if (ret < 0) + return ret; + + ret = media_device_register_entity(sd->v4l2_dev->mdev, con); + if (ret < 0) + return ret; + + ret = media_create_pad_link(con, 0, &sd->entity, port, flags); + if (ret < 0) { + media_device_unregister_entity(con); + return ret; + } + + if (is_svideo) { + /* svideo links to both aip1a and aip1b */ + ret = media_create_pad_link(con, 0, &sd->entity, + port + 1, flags); + if (ret < 0) { + media_device_unregister_entity(con); + return ret; + } + } + + /* enable default input */ + if (flags == MEDIA_LNK_FL_ENABLED) { + if (is_svideo) { + decoder->pads_state[TVP5150_PAD_AIP1A] = + decoder->pads_state[TVP5150_PAD_AIP1B] = + TVP5150_PAD_ACTIVE_SVIDEO; + decoder->input = TVP5150_SVIDEO; + } else { + if (port == 0) { + decoder->pads_state[TVP5150_PAD_AIP1A] = + TVP5150_PAD_ACTIVE_COMPOSITE; + decoder->input = TVP5150_COMPOSITE0; + } else { + decoder->pads_state[TVP5150_PAD_AIP1B] = + TVP5150_PAD_ACTIVE_COMPOSITE; + decoder->input = TVP5150_COMPOSITE1; + } + } + tvp5150_selmux(sd); + decoder->modify_second_link = false; + } + } +#endif + return 0; +} + + /* ----------------------------------------------------------------------- */ static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = { @@ -1367,6 +1614,10 @@ static const struct v4l2_subdev_ops tvp5150_ops = { .pad = &tvp5150_pad_ops, }; +static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = { + .registered = tvp5150_registered, +}; + /**************************************************************************** I2C Client & Driver ****************************************************************************/ @@ -1515,38 +1766,197 @@ static int tvp5150_init(struct i2c_client *c) return 0; } -static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np) +#if defined(CONFIG_MEDIA_CONTROLLER) +static int tvp5150_add_of_connectors(struct tvp5150 *decoder) { - struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 }; - struct device_node *ep; - unsigned int flags; - int ret = 0; + struct device *dev = decoder->sd.dev; + struct device_node *rp; + struct of_endpoint ep; + struct tvp5150_connector *connectors; + unsigned int connectors_num = decoder->connectors_num; + int i, ret; + + /* Allocate and initialize all available input connectors */ + connectors = devm_kcalloc(dev, connectors_num, sizeof(*connectors), + GFP_KERNEL); + if (!connectors) + return -ENOMEM; - ep = of_graph_get_next_endpoint(np, NULL); - if (!ep) - return -EINVAL; + for (i = 0; i < connectors_num; i++) { + rp = of_graph_get_remote_port_parent(decoder->endpoints[i]); + of_graph_parse_endpoint(decoder->endpoints[i], &ep); + connectors[i].port_num = ep.port; + connectors[i].is_svideo = !!of_device_is_compatible(rp, + "svideo-connector"); - ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg); - if (ret) - goto err; + if (connectors[i].is_svideo) + connectors[i].ent.function = MEDIA_ENT_F_CONN_SVIDEO; + else + connectors[i].ent.function = MEDIA_ENT_F_CONN_COMPOSITE; + + connectors[i].ent.flags = MEDIA_ENT_FL_CONNECTOR; + ret = of_property_read_string(rp, "label", + &connectors[i].ent.name); + if (ret < 0) + return ret; + } + + decoder->connectors = connectors; + + return 0; +} +#endif + +static int tvp5150_mc_init(struct v4l2_subdev *sd) +{ +#if defined(CONFIG_MEDIA_CONTROLLER) + struct tvp5150 *decoder = to_tvp5150(sd); + unsigned int i; + int ret; + + sd->entity.ops = &tvp5150_sd_media_ops; + sd->entity.function = MEDIA_ENT_F_ATV_DECODER; - flags = bus_cfg.bus.parallel.flags; + /* Initialize all TVP5150 pads */ + for (i = 0; i < TVP5150_NUM_PADS; i++) { + if (i < TVP5150_NUM_PADS - 1) { + decoder->pads[i].flags = MEDIA_PAD_FL_SINK; + decoder->pads[i].sig_type = PAD_SIGNAL_ANALOG; + } else { + decoder->pads[i].flags = MEDIA_PAD_FL_SOURCE; + decoder->pads[i].sig_type = PAD_SIGNAL_DV; + } + } + ret = media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, + decoder->pads); + if (ret < 0) + goto out; - if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL && - !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH && - flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH && - flags & V4L2_MBUS_FIELD_EVEN_LOW)) { + if (IS_ENABLED(CONFIG_OF)) + ret = tvp5150_add_of_connectors(decoder); +#endif +out: + return ret; +} + +static bool tvp5150_of_valid_input(struct device_node *endpoint, + unsigned int port, unsigned int id) +{ + struct device_node *rp = of_graph_get_remote_port_parent(endpoint); + const char *input; + int ret; + + /* perform some basic checks needed for later mc_init */ + switch (port) { + case TVP5150_PAD_AIP1A: + /* svideo must be connected to endpoint@1 */ + ret = id ? of_device_is_compatible(rp, "svideo-connector") : + of_device_is_compatible(rp, + "composite-video-connector"); + if (!ret) + return false; + break; + case TVP5150_PAD_AIP1B: + ret = of_device_is_compatible(rp, "composite-video-connector"); + if (!ret) + return false; + break; + } + + ret = of_property_read_string(rp, "label", &input); + if (ret < 0) + return false; + + return true; +} + +static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np) +{ + struct device *dev = decoder->sd.dev; + struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 }; + struct device_node *ep_np; + unsigned int flags; + int ret, i = 0, in = 0; + bool found = false; + + /* at least 1 output and 1 input */ + decoder->endpoints_num = of_graph_get_endpoint_count(np); + if (decoder->endpoints_num < 2 || decoder->endpoints_num > 4) { ret = -EINVAL; goto err; } - decoder->mbus_type = bus_cfg.bus_type; + for_each_endpoint_of_node(np, ep_np) { + struct of_endpoint ep; + + of_graph_parse_endpoint(ep_np, &ep); + if (decoder->endpoints[i]) { + /* this should never happen */ + dev_err(dev, "Invalid endpoint %pOF on port %d\n", + ep.local_node, ep.port); + ret = -EINVAL; + goto err; + } + switch (ep.port) { + /* fall through */ + case TVP5150_PAD_AIP1A: + case TVP5150_PAD_AIP1B: + if (!tvp5150_of_valid_input(ep_np, ep.port, ep.id)) { + dev_err(dev, + "Invalid endpoint %pOF on port %d\n", + ep.local_node, ep.port); + ret = -EINVAL; + goto err; + } + in++; + break; + case TVP5150_PAD_VID_OUT: + ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np), + &bus_cfg); + if (ret) + goto err; + + flags = bus_cfg.bus.parallel.flags; + + if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL && + !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH && + flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH && + flags & V4L2_MBUS_FIELD_EVEN_LOW)) { + ret = -EINVAL; + goto err; + } + + decoder->mbus_type = bus_cfg.bus_type; + break; + default: + dev_err(dev, "Invalid port %d for endpoint %pOF\n", + ep.port, ep.local_node); + ret = -EINVAL; + goto err; + } + + of_node_get(ep_np); + decoder->endpoints[i] = ep_np; + i++; + + found = true; + } + + decoder->connectors_num = in; + return found ? 0 : -ENODEV; err: - of_node_put(ep); return ret; } +static void tvp5150_dt_cleanup(struct tvp5150 *decoder) +{ + unsigned int i; + + for (i = 0; i < TVP5150_NUM_PADS; i++) + of_node_put(decoder->endpoints[i]); +} + static const char * const tvp5150_test_patterns[2] = { "Disabled", "Black screen" @@ -1585,7 +1995,7 @@ static int tvp5150_probe(struct i2c_client *c, res = tvp5150_parse_dt(core, np); if (res) { dev_err(sd->dev, "DT parsing error: %d\n", res); - return res; + goto err_cleanup_dt; } } else { /* Default to BT.656 embedded sync */ @@ -1593,25 +2003,16 @@ static int tvp5150_probe(struct i2c_client *c, } v4l2_i2c_subdev_init(sd, c, &tvp5150_ops); + sd->internal_ops = &tvp5150_internal_ops; sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; -#if defined(CONFIG_MEDIA_CONTROLLER) - core->pads[TVP5150_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK; - core->pads[TVP5150_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG; - core->pads[TVP5150_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; - core->pads[TVP5150_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV; - - sd->entity.function = MEDIA_ENT_F_ATV_DECODER; - - res = media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, core->pads); - if (res < 0) - return res; - -#endif + res = tvp5150_mc_init(sd); + if (res) + goto err_cleanup_dt; res = tvp5150_detect_version(core); if (res < 0) - return res; + goto err_cleanup_dt; core->norm = V4L2_STD_ALL; /* Default is autodetect */ core->detected_norm = V4L2_STD_UNKNOWN; @@ -1637,7 +2038,7 @@ static int tvp5150_probe(struct i2c_client *c, sd->ctrl_handler = &core->hdl; if (core->hdl.error) { res = core->hdl.error; - goto err; + goto err_free_v4l2_ctrls; } tvp5150_set_default(tvp5150_read_std(sd), &core->rect); @@ -1649,19 +2050,21 @@ static int tvp5150_probe(struct i2c_client *c, tvp5150_isr, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, "tvp5150", core); if (res) - goto err; + goto err_free_v4l2_ctrls; } res = v4l2_async_register_subdev(sd); if (res < 0) - goto err; + goto err_free_v4l2_ctrls; if (debug > 1) tvp5150_log_status(sd); return 0; -err: +err_free_v4l2_ctrls: v4l2_ctrl_handler_free(&core->hdl); +err_cleanup_dt: + tvp5150_dt_cleanup(core); return res; } -- 2.20.1