From mboxrd@z Thu Jan  1 00:00:00 1970
From: sbabic at denx.de <sbabic@denx.de>
Date: Wed, 30 Jan 2019 09:05:14 +0000 (UTC)
Subject: [U-Boot] [U-Boot,v4,2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
In-Reply-To: <20181211113446.16120-2-martyn.welch@collabora.com> Stefan Agner
 <stefan.agner@toradex.com>,
 Martyn Welch <martyn.welch@collabora.com>, Ian
 Ray <ian.ray@ge.com>,  NXP Linux Team <linux-imx@nxp.com>, Michal Simek
 <michal.simek@xilinx.com>,  Breno Lima <breno.lima@nxp.com>, Fabio Estevam
 <fabio.estevam@nxp.com>, Marek Vasut <marek.vasut+renesas@gmail.com>
Message-ID: <20190130090720.722C3C21E1D@lists.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> Port for the PHYTEC phyBOARD-i.MX6UL-Segin single board computer. Based on
> the PHYTEC phyCORE-i.MX6UL SOM (PCL063).
> CPU:   Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz)
> CPU:   Industrial temperature grade (-40C to 105C) at 44C
> Reset cause: POR
> Board: PHYTEC phyCORE-i.MX6UL
> I2C:   ready
> DRAM:  256 MiB
> NAND:  512 MiB
> MMC:   FSL_SDHC: 0
> In:    serial
> Out:   serial
> Err:   serial
> Net:   FEC0
> Working:
>  - Eth0
>  - i2C
>  - MMC/SD
>  - NAND
>  - UART (1 & 5)
>  - USB (host & otg)
> Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================