From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: <> From: Martin Kelly Subject: [PATCH v4 0/6] iio:bmi160: add drdy interrupt support Date: Sat, 2 Feb 2019 13:55:55 -0800 Message-Id: <20190202215601.20275-1-martin@martingkelly.com> To: linux-iio@vger.kernel.org Cc: Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Rob Herring , Daniel Baluta , devicetree@vger.kernel.org, Martin Kelly List-ID: From: Martin Kelly This patch series adds drdy interrupt support to the BMI160 IMU. It also updates the relevant DT bindings and does a little bit of related cleanup. v2: - Drop "BOTH" interrupt setting. - Change to "if (ret)" instead of "if (ret < 0)". - Stylistic changes suggested by Jonathan Cameron. - Fix bogus return check after iio_trigger_get. v3: - More cleanup changes. - Directly get INT1/INT2 by name instead of using I2C/SPI IRQs. Move this code to the probe function. - Fix EDGE/LEVEL #define naming. The code was correct but the names were wrong. v4: - Use standard "drive-open-drain" DT name. Martin Kelly (6): iio:bmi160: add SPDX identifiers iio:bmi160: add drdy interrupt support dt-bindings: fix incorrect bmi160 IRQ note dt-bindings: document open-drain property iio:bmi160: use iio_pollfunc_store_time iio:bmi160: use if (ret) instead of if (ret < 0) .../devicetree/bindings/iio/imu/bmi160.txt | 6 +- drivers/iio/imu/bmi160/bmi160.h | 11 + drivers/iio/imu/bmi160/bmi160_core.c | 317 +++++++++++++++++++-- drivers/iio/imu/bmi160/bmi160_i2c.c | 5 +- drivers/iio/imu/bmi160/bmi160_spi.c | 4 +- 5 files changed, 304 insertions(+), 39 deletions(-) -- 2.11.0