All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-s390x@nongnu.org, Thomas Huth <thuth@redhat.com>,
	Halil Pasic <pasic@linux.ibm.com>,
	Christian Borntraeger <borntraeger@de.ibm.com>,
	Janosch Frank <frankja@linux.ibm.com>,
	Cornelia Huck <cohuck@redhat.com>,
	Richard Henderson <rth@twiddle.net>,
	David Hildenbrand <david@redhat.com>
Subject: [Qemu-devel] [PATCH v1 04/15] s390x/tcg: Fix parts of IEEE exception handling
Date: Tue, 12 Feb 2019 12:02:57 +0100	[thread overview]
Message-ID: <20190212110308.13707-6-david@redhat.com> (raw)
In-Reply-To: <20190212110308.13707-1-david@redhat.com>

Many things are wrong and some parts cannot be fixed yet. Fix what we
can fix easily and add two FIXMEs:

The fpc flags are not updated in case an exception is actually injected.
Inexact exceptions have to be handled separately, as they are the only
exceptions that can coexist with underflows and overflows.

I reread the horribly complicated chapters in the PoP at least 5 times
and hope I got it right.

For references:
- z14 PoP, 9-18, "IEEE Exceptions"
- z14 PoP, 19-9, Figure 19-8

Signed-off-by: David Hildenbrand <david@redhat.com>
---
 target/s390x/fpu_helper.c | 38 ++++++++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 6 deletions(-)

diff --git a/target/s390x/fpu_helper.c b/target/s390x/fpu_helper.c
index 60f589608e..94680053f9 100644
--- a/target/s390x/fpu_helper.c
+++ b/target/s390x/fpu_helper.c
@@ -63,13 +63,39 @@ static void handle_exceptions(CPUS390XState *env, uintptr_t retaddr)
     env->fpu_status.float_exception_flags = 0;
     s390_exc = s390_softfloat_exc_to_ieee(qemu_exc);
 
-    /* Install the exceptions that we raised.  */
-    env->fpc |= s390_exc << 16;
+    /*
+     * FIXME:
+     * 1. Right now, all inexact conditions are inidicated as
+     *    "truncated" (0) and never as "incremented" (1) in the DXC.
+     * 2. Only traps due to invalid/divbyzero are suppressing. Other traps
+     *    are completing, meaning the target register has to be written!
+     *    This, however will mean that we have to write the register before
+     *    triggering the trap - impossible right now.
+     */
+
+    /*
+     * invalid/divbyzero cannot coexist with other conditions.
+     * overflow/underflow however can coexist with inexact, we have to
+     * handle it separatly.
+     */
+    if (s390_exc & ~S390_IEEE_MASK_INEXACT) {
+        if (s390_exc & ~S390_IEEE_MASK_INEXACT & env->fpc >> 24) {
+            /* trap condition - inexact reported along */
+            tcg_s390_data_exception(env, s390_exc, retaddr);
+        }
+        /* nontrap condition - inexact handled differently */
+        env->fpc |= (s390_exc & ~S390_IEEE_MASK_INEXACT) << 16;
+    }
 
-    /* Send signals for enabled exceptions.  */
-    s390_exc &= env->fpc >> 24;
-    if (s390_exc) {
-        tcg_s390_data_exception(env, s390_exc, retaddr);
+    /* inexact handling */
+    if (s390_exc & S390_IEEE_MASK_INEXACT) {
+        /* trap condition - overflow/underflow _not_ reported along */
+        if (s390_exc & S390_IEEE_MASK_INEXACT & env->fpc >> 24) {
+            tcg_s390_data_exception(env, s390_exc & S390_IEEE_MASK_INEXACT,
+                                    retaddr);
+        }
+        /* nontrap condition */
+        env->fpc |= (s390_exc & S390_IEEE_MASK_INEXACT) << 16;
     }
 }
 
-- 
2.17.2

  parent reply	other threads:[~2019-02-12 11:03 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-12 11:02 [Qemu-devel] [PATCH v1] s390x: Add floating-point extension facility to "qemu" cpu model David Hildenbrand
2019-02-12 11:02 ` [Qemu-devel] [PATCH v1 00/15] s390x/tcg: Implement floating-point extension facility David Hildenbrand
2019-02-12 11:02 ` [Qemu-devel] [PATCH v1 01/15] s390x/tcg: Fix TEST DATA CLASS instructions David Hildenbrand
2019-02-12 18:01   ` Richard Henderson
2019-02-12 18:17     ` David Hildenbrand
2019-02-12 11:02 ` [Qemu-devel] [PATCH v1 02/15] s390x/tcg: Fix rounding from float128 to uint64_t/uin32_t David Hildenbrand
2019-02-12 18:03   ` Richard Henderson
2019-02-12 11:02 ` [Qemu-devel] [PATCH v1 03/15] s390x/tcg: Factor out conversion of softfloat exceptions David Hildenbrand
2019-02-12 18:05   ` Richard Henderson
2019-02-12 11:02 ` David Hildenbrand [this message]
2019-02-12 18:13   ` [Qemu-devel] [PATCH v1 04/15] s390x/tcg: Fix parts of IEEE exception handling Richard Henderson
2019-02-12 11:02 ` [Qemu-devel] [PATCH v1 05/15] s390x/tcg: Hide IEEE underflows in some scenarios David Hildenbrand
2019-02-12 18:14   ` Richard Henderson
2019-02-12 11:02 ` [Qemu-devel] [PATCH v1 06/15] s390x/tcg: Refactor SET FPC AND SIGNAL handling David Hildenbrand
2019-02-12 18:55   ` Richard Henderson
2019-02-12 11:03 ` [Qemu-devel] [PATCH v1 07/15] s390x/tcg: Fix simulated-IEEE exceptions David Hildenbrand
2019-02-12 18:56   ` Richard Henderson
2019-02-12 11:03 ` [Qemu-devel] [PATCH v1 08/15] s390x/tcg: Handle SET FPC AND LOAD FPC 3-bit BFP rounding modes David Hildenbrand
2019-02-12 19:07   ` Richard Henderson
2019-02-12 19:32     ` David Hildenbrand
2019-02-12 19:56       ` Richard Henderson
2019-02-13 12:49         ` David Hildenbrand
2019-02-13 19:11           ` Richard Henderson
2019-02-12 11:03 ` [Qemu-devel] [PATCH v1 09/15] s390x/tcg: Check for exceptions in SET BFP ROUNDING MODE David Hildenbrand
2019-02-12 19:58   ` Richard Henderson
2019-02-12 11:03 ` [Qemu-devel] [PATCH v1 10/15] s390x/tcg: Refactor saving/restoring the bfp rounding mode David Hildenbrand
2019-02-12 20:03   ` Richard Henderson
2019-02-12 11:03 ` [Qemu-devel] [PATCH v1 11/15] s390x/tcg: Prepare for IEEE-inexact-exception control (XxC) David Hildenbrand
2019-02-12 20:07   ` Richard Henderson
2019-02-12 11:03 ` [Qemu-devel] [PATCH v1 12/15] s390x/tcg: Implement XxC and checks for most FP instructions David Hildenbrand
2019-02-12 20:23   ` Richard Henderson
2019-02-13 12:52     ` David Hildenbrand
2019-02-12 11:03 ` [Qemu-devel] [PATCH v1 13/15] s390x/tcg: Implement rounding mode and XxC for LOAD ROUNDED David Hildenbrand
2019-02-12 20:25   ` Richard Henderson
2019-02-12 11:03 ` [Qemu-devel] [PATCH v1 14/15] s390x/tcg: Handle all rounding modes overwritten by BFP instructions David Hildenbrand
2019-02-12 20:29   ` Richard Henderson
2019-02-12 11:03 ` [Qemu-devel] [PATCH v1 15/15] s390x: Add floating-point extension facility to "qemu" cpu model David Hildenbrand
2019-02-12 11:04 ` [Qemu-devel] [PATCH v1] " David Hildenbrand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190212110308.13707-6-david@redhat.com \
    --to=david@redhat.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=frankja@linux.ibm.com \
    --cc=pasic@linux.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    --cc=rth@twiddle.net \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.