From: Anup Patel <Anup.Patel@wdc.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v9 00/15] SiFive FU540 Support
Date: Thu, 21 Feb 2019 04:30:08 +0000 [thread overview]
Message-ID: <20190221042936.13441-1-anup.patel@wdc.com> (raw)
This patchset adds SiFive Freedom Unleashed (FU540) support
to RISC-V U-Boot.
The patches are based upon latest U-Boot source tree
(git://git.denx.de/u-boot.git) at v2019.04-rc2 commit id
f14de0014c56093feecf42ca38b8ae5b3878f176
All drivers namely: SiFive PRCI, SiFive Serial, and Cadance
MACB Ethernet work fine on actual SiFive Unleashed board and
QEMU sifive_u machine.
Changes since v8:
- Added bindings document for fixed-factor-clock adapted
from Linux sources in PATCH9
Changes since v7:
- Rebased patches to latest U-Boot source tree
- Rename "ret" to "rate" in clk_fixed_factor_get_rate()
of PATCH9
Changes since v6:
- Rebased patches to latest U-Boot source tree
- Droped PATCH1 and PATCH2. Instead added a PATCH to
select CREATE_ARCH_SYMLINK for RISC-V
- Few typo fixes in SiFive FU540 readme
Changes since v5:
- Added PATCH16 to fix INITRD passing to Linux using bootm
for U-Boot RISC-V
Changes since v4:
- Removed #ifndef from macb_enable_clk() in PATCH7
- Updated test/dm/clk.c in PATCH10 to test fixed factor clock
using sandbox
Changes since v3:
- Added patch to un-ignore arch/riscv/include/asm/arch
- Added patch to fix mrproper make target to only remove
arch/*/include/asm/arch paths which are symlinks
- Added patch to have place-holder asm/arch/clk.h for RISC-V
- Removed "#ifndef CONFIG_RISCV" from macb clk API patch
Changes since v2:
- Fixed typo in PATCH3 comments
- Removed "#if" from clk_fixed_factor_ofdata_to_platdata() in PATCH7
- Added PATCH12 for SiFive FU540 README guide
Changes since v1:
- Re-ordered SoB in patches with multiple SoB
- Simplified board_get_usable_ram_top() added by PATCH3
Anup Patel (10):
riscv: Enable create symlink using kconfig
riscv: Rename cpu/qemu to cpu/generic
riscv: Add asm/dma-mapping.h for DMA mappings
riscv: Add place-holder asm/arch/clk.h for driver compilation
riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
net: macb: Fix clk API usage for RISC-V systems
clk: Add SiFive FU540 PRCI clock driver
clk: Add fixed-factor clock driver
riscv: Add SiFive FU540 board support
riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd
Atish Patra (5):
net: macb: Fix GEM hardware detection
drivers: serial_sifive: Fix baud rate calculation
drivers: serial_sifive: Skip baudrate config if no input clock
cpu: Bind timer driver for boot hart
doc: Add a readme guide for SiFive FU540
arch/Kconfig | 1 +
arch/riscv/Kconfig | 6 +-
arch/riscv/cpu/{qemu => generic}/Kconfig | 2 +-
arch/riscv/cpu/{qemu => generic}/Makefile | 0
arch/riscv/cpu/{qemu => generic}/cpu.c | 0
arch/riscv/cpu/generic/dram.c | 37 ++
arch/riscv/cpu/qemu/dram.c | 17 -
arch/riscv/include/asm/arch-generic/clk.h | 14 +
arch/riscv/include/asm/config.h | 1 +
arch/riscv/include/asm/dma-mapping.h | 38 ++
arch/sandbox/dts/test.dts | 8 +
board/emulation/qemu-riscv/Kconfig | 4 +-
.../qemu-riscv => sifive/fu540}/Kconfig | 36 +-
board/sifive/fu540/MAINTAINERS | 9 +
board/sifive/fu540/Makefile | 5 +
board/sifive/fu540/fu540.c | 17 +
configs/sifive_fu540_defconfig | 11 +
doc/README.sifive-fu540 | 303 +++++++++
.../clock/fixed-factor-clock.txt | 24 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 5 +-
drivers/clk/clk_fixed_factor.c | 72 +++
drivers/clk/sifive/Kconfig | 19 +
drivers/clk/sifive/Makefile | 5 +
.../clk/sifive/analogbits-wrpll-cln28hpc.h | 101 +++
drivers/clk/sifive/fu540-prci.c | 604 ++++++++++++++++++
drivers/clk/sifive/wrpll-cln28hpc.c | 390 +++++++++++
drivers/cpu/riscv_cpu.c | 7 +-
drivers/net/macb.c | 11 +-
drivers/serial/serial_sifive.c | 60 +-
include/configs/sifive-fu540.h | 43 ++
include/dt-bindings/clk/sifive-fu540-prci.h | 29 +
test/dm/clk.c | 5 +-
33 files changed, 1819 insertions(+), 66 deletions(-)
rename arch/riscv/cpu/{qemu => generic}/Kconfig (91%)
rename arch/riscv/cpu/{qemu => generic}/Makefile (100%)
rename arch/riscv/cpu/{qemu => generic}/cpu.c (100%)
create mode 100644 arch/riscv/cpu/generic/dram.c
delete mode 100644 arch/riscv/cpu/qemu/dram.c
create mode 100644 arch/riscv/include/asm/arch-generic/clk.h
create mode 100644 arch/riscv/include/asm/dma-mapping.h
copy board/{emulation/qemu-riscv => sifive/fu540}/Kconfig (57%)
create mode 100644 board/sifive/fu540/MAINTAINERS
create mode 100644 board/sifive/fu540/Makefile
create mode 100644 board/sifive/fu540/fu540.c
create mode 100644 configs/sifive_fu540_defconfig
create mode 100644 doc/README.sifive-fu540
create mode 100644 doc/device-tree-bindings/clock/fixed-factor-clock.txt
create mode 100644 drivers/clk/clk_fixed_factor.c
create mode 100644 drivers/clk/sifive/Kconfig
create mode 100644 drivers/clk/sifive/Makefile
create mode 100644 drivers/clk/sifive/analogbits-wrpll-cln28hpc.h
create mode 100644 drivers/clk/sifive/fu540-prci.c
create mode 100644 drivers/clk/sifive/wrpll-cln28hpc.c
create mode 100644 include/configs/sifive-fu540.h
create mode 100644 include/dt-bindings/clk/sifive-fu540-prci.h
--
2.17.1
next reply other threads:[~2019-02-21 4:30 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-21 4:30 Anup Patel [this message]
2019-02-21 4:30 ` [U-Boot] [PATCH v9 01/15] riscv: Enable create symlink using kconfig Anup Patel
2019-02-21 4:30 ` [U-Boot] [PATCH v9 02/15] riscv: Rename cpu/qemu to cpu/generic Anup Patel
2019-02-21 4:30 ` [U-Boot] [PATCH v9 03/15] riscv: Add asm/dma-mapping.h for DMA mappings Anup Patel
2019-02-21 4:30 ` [U-Boot] [PATCH v9 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation Anup Patel
2019-02-21 4:30 ` [U-Boot] [PATCH v9 05/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems Anup Patel
2019-02-21 4:30 ` [U-Boot] [PATCH v9 06/15] net: macb: Fix clk API usage for RISC-V systems Anup Patel
2019-02-21 18:35 ` Joe Hershberger
2019-02-21 4:30 ` [U-Boot] [PATCH v9 07/15] net: macb: Fix GEM hardware detection Anup Patel
2019-02-21 4:31 ` [U-Boot] [PATCH v9 08/15] clk: Add SiFive FU540 PRCI clock driver Anup Patel
2019-02-21 4:31 ` [U-Boot] [PATCH v9 09/15] clk: Add fixed-factor " Anup Patel
2019-02-21 4:31 ` [U-Boot] [PATCH v9 10/15] drivers: serial_sifive: Fix baud rate calculation Anup Patel
2019-02-21 4:31 ` [U-Boot] [PATCH v9 11/15] drivers: serial_sifive: Skip baudrate config if no input clock Anup Patel
2019-02-21 4:31 ` [U-Boot] [PATCH v9 12/15] cpu: Bind timer driver for boot hart Anup Patel
2019-02-21 4:31 ` [U-Boot] [PATCH v9 13/15] riscv: Add SiFive FU540 board support Anup Patel
2019-02-21 4:31 ` [U-Boot] [PATCH v9 14/15] doc: Add a readme guide for SiFive FU540 Anup Patel
2019-02-21 4:31 ` [U-Boot] [PATCH v9 15/15] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190221042936.13441-1-anup.patel@wdc.com \
--to=anup.patel@wdc.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.