From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heinrich Schuchardt Date: Wed, 27 Feb 2019 20:05:43 +0100 Subject: [U-Boot] [PATCH 1/1] configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT Message-ID: <20190227190543.3325-1-xypron.glpk@gmx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The SPL for the Tinker Board has to fit into 32 KiB. Currently this limit is exceeded. CONFIG_SPL_I2C_SUPPORT is not needed to move to main U-Boot. So let's disable it. Suggested-by: David Wu Signed-off-by: Heinrich Schuchardt --- This solves only one of the problems with the boards in v2019.04. The next problem is that reading the environment from MMC fails. The patch [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB https://lists.denx.de/pipermail/u-boot/2019-February/358883.html makes the problem visibe. --- configs/tinker-rk3288_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig index 68adf7635bf..03a7f81d63d 100644 --- a/configs/tinker-rk3288_defconfig +++ b/configs/tinker-rk3288_defconfig @@ -18,7 +18,6 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 -CONFIG_SPL_I2C_SUPPORT=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y -- 2.20.1