All of lore.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Keerthy <j-keerthy@ti.com>, Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH] regulator: lp87565: Convert to use regulator_set/get_current_limit_regmap
Date: Fri,  1 Mar 2019 14:24:32 +0800	[thread overview]
Message-ID: <20190301062432.2322-1-axel.lin@ingics.com> (raw)

Use regulator_set/get_current_limit_regmap helpers to save some code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/lp87565-regulator.c | 47 ++++-----------------------
 1 file changed, 7 insertions(+), 40 deletions(-)

diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c
index 0418e478c6dc..81eb4b890c0c 100644
--- a/drivers/regulator/lp87565-regulator.c
+++ b/drivers/regulator/lp87565-regulator.c
@@ -34,6 +34,10 @@
 			.ramp_delay		= _delay,		\
 			.linear_ranges		= _lr,			\
 			.n_linear_ranges	= ARRAY_SIZE(_lr),	\
+			.curr_table = lp87565_buck_uA,			\
+			.n_current_limits = ARRAY_SIZE(lp87565_buck_uA),\
+			.csel_reg = (_cr),				\
+			.csel_mask = LP87565_BUCK_CTRL_2_ILIM,		\
 		},							\
 		.ctrl2_reg = _cr,					\
 	}
@@ -102,44 +106,7 @@ static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
 	return 0;
 }
 
-static int lp87565_buck_set_current_limit(struct regulator_dev *rdev,
-					  int min_uA, int max_uA)
-{
-	int id = rdev_get_id(rdev);
-	struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
-	int i;
-
-	for (i = ARRAY_SIZE(lp87565_buck_uA) - 1; i >= 0; i--) {
-		if (lp87565_buck_uA[i] >= min_uA &&
-		    lp87565_buck_uA[i] <= max_uA)
-			return regmap_update_bits(lp87565->regmap,
-						  regulators[id].ctrl2_reg,
-						  LP87565_BUCK_CTRL_2_ILIM,
-						  i << __ffs(LP87565_BUCK_CTRL_2_ILIM));
-	}
-
-	return -EINVAL;
-}
-
-static int lp87565_buck_get_current_limit(struct regulator_dev *rdev)
-{
-	int id = rdev_get_id(rdev);
-	struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
-	int ret;
-	unsigned int val;
-
-	ret = regmap_read(lp87565->regmap, regulators[id].ctrl2_reg, &val);
-	if (ret)
-		return ret;
-
-	val = (val & LP87565_BUCK_CTRL_2_ILIM) >>
-	       __ffs(LP87565_BUCK_CTRL_2_ILIM);
-
-	return (val < ARRAY_SIZE(lp87565_buck_uA)) ?
-			lp87565_buck_uA[val] : -EINVAL;
-}
-
-/* Operations permitted on BUCK0, BUCK1 */
+/* Operations permitted on BUCKs */
 static const struct regulator_ops lp87565_buck_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
@@ -150,8 +117,8 @@ static const struct regulator_ops lp87565_buck_ops = {
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
 	.set_ramp_delay		= lp87565_buck_set_ramp_delay,
-	.set_current_limit	= lp87565_buck_set_current_limit,
-	.get_current_limit	= lp87565_buck_get_current_limit,
+	.set_current_limit	= regulator_set_current_limit_regmap,
+	.get_current_limit	= regulator_get_current_limit_regmap,
 };
 
 static const struct lp87565_regulator regulators[] = {
-- 
2.17.1


             reply	other threads:[~2019-03-01  6:24 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-01  6:24 Axel Lin [this message]
2019-03-01 11:31 ` [PATCH] regulator: lp87565: Convert to use regulator_set/get_current_limit_regmap kbuild test robot
2019-03-01 14:34   ` Axel Lin
2019-03-01 15:31     ` [kbuild-all] " Li, Philip
2019-03-01 12:53 ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190301062432.2322-1-axel.lin@ingics.com \
    --to=axel.lin@ingics.com \
    --cc=broonie@kernel.org \
    --cc=j-keerthy@ti.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.