Hi Sakari and Niklas,

On Thu, Mar 07, 2019 at 11:47:26AM +0200, Sakari Ailus wrote:
> Hi Jacopo,
>
> On Tue, Mar 05, 2019 at 07:51:19PM +0100, Jacopo Mondi wrote:
> > Hello,
> >    third version of multiplexed stream support patch series.
> >
> > V2 sent by Niklas is available at:
> > https://patchwork.kernel.org/cover/10573817/
> >
> > As per v2, most of the core patches are work from Sakari and Laurent, with
> > Niklas' support on top for adv748x and rcar-csi2.
> >
> > The use case of the series remains the same: support for virtual channel
> > selection implemented on R-Car Gen3 and adv748x. Quoting the v2 cover letter:
> >
> > -------------------------------------------------------------------------------
> > I have added driver support for the devices used on the Renesas Gen3
> > platforms, a ADV7482 connected to the R-Car CSI-2 receiver. With these
> > changes I can control which of the analog inputs of the ADV7482 the
> > video source is captured from and on which CSI-2 virtual channel the
> > video is transmitted on to the R-Car CSI-2 receiver.
> >
> > The series adds two new subdev IOCTLs [GS]_ROUTING which allows
> > user-space to get and set routes inside a subdevice. I have added RFC
> > support for these to v4l-utils [2] which can be used to test this
> > series, example:
> >
> >     Check the internal routing of the adv748x csi-2 transmitter:
> >     v4l2-ctl -d /dev/v4l-subdev24 --get-routing
> >     0/0 -> 1/0 [ENABLED]
> >     0/0 -> 1/1 []
> >     0/0 -> 1/2 []
> >     0/0 -> 1/3 []
> >
> >
> >     Select that video should be outputed on VC 2 and check the result:
> >     $ v4l2-ctl -d /dev/v4l-subdev24 --set-routing '0/0 -> 1/2 [1]'
> >
> >     $ v4l2-ctl -d /dev/v4l-subdev24 --get-routing
> >     0/0 -> 1/0 []
> >     0/0 -> 1/1 []
> >     0/0 -> 1/2 [ENABLED]
> >     0/0 -> 1/3 []
> > -------------------------------------------------------------------------------
> >
> > Below is reported the media graph of the system used for testing [1].
> >
> > v4l2-ctl patches to handle the newly introduced IOCTLs are available from
> > Niklas' repository at:
> > git://git.ragnatech.se/v4l-utils routing
>
> Could you send the v4l2-ctl patches out as well, please?
>

Niklas sent them on late 2017... time flies :)
https://patchwork.kernel.org/patch/10113189/

Would you like to have them re-sent?

Thanks
   j

> --
> Sakari Ailus
> sakari.ailus@linux.intel.com