From: Bjorn Helgaas <helgaas@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Subject: [GIT PULL] PCI changes for v5.1
Date: Fri, 8 Mar 2019 11:31:54 -0600 [thread overview]
Message-ID: <20190308173154.GC214730@google.com> (raw)
PCI changes:
- Use match_string() instead of reimplementing it (Andy Shevchenko)
- Enable SERR# forwarding for all bridges (Bharat Kumar Gogada)
- Use Latency Tolerance Reporting if already enabled by platform (Bjorn
Helgaas)
- Save/restore LTR info for suspend/resume (Bjorn Helgaas)
- Fix DPC use of uninitialized data (Dongdong Liu)
- Probe bridge window attributes only once at enumeration-time to fix
device accesses during rescan (Bjorn Helgaas)
- Return BAR size (not "size -1 ") from pci_size() to simplify code (Du
Changbin)
- Use config header type (not class code) identify bridges more reliably
(Honghui Zhang)
- Work around Intel Denverton incorrect Trace Hub BAR size reporting
(Alexander Shishkin)
- Reorder pciehp cached state/hardware state updates to avoid missed
interrupts (Mika Westerberg)
- Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann)
- Mark expected switch fall-through (Mathieu Malaterre)
- Use of_node_name_eq() for node name comparisons (Rob Herring)
- Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang)
- Consolidate Rohm Vendor ID definitions (Andy Shevchenko)
- Use u32 (not __u32) for things not exposed to userspace (Logan
Gunthorpe)
- Fix locking semantics of bus and slot reset interfaces (Alex
Williamson)
- Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang)
- Allow portdrv to claim subtractive decode Ports so PCIe services will
work for them (Honghui Zhang)
- Report PCIe links that become degraded at run-time (Alexandru Gagniuc)
- Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt
hotplug (Mika Westerberg)
- Revert runtime PM suspend/resume callbacks that broke PME on network
cable plug (Mika Westerberg)
- Disable Data Link State Changed interrupts to prevent wakeup
immediately after suspend (Mika Westerberg)
- Extend altera to support Stratix 10 (Ley Foon Tan)
- Allow building altera driver on ARM64 (Ley Foon Tan)
- Replace Douglas with Tom Joseph as Cadence PCI host/endpoint maintainer
(Lorenzo Pieralisi)
- Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro)
- Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay
Abraham I)
- Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay
Abraham I)
- Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I)
- Simplify dwc (remove unnecessary header includes, name variables
consistently, reduce inverted logic, etc) (Gustavo Pimentel)
- Add i.MX8MQ support (Andrey Smirnov)
- Add message to help debug dwc MSI-X mask bit errors (Gustavo Pimentel)
- Work around imx7d PCIe PLL erratum (Trent Piepho)
- Don't assert qcom reset GPIO during probe (Bjorn Andersson)
- Skip dwc MSI init if MSIs have been disabled (Lucas Stach)
- Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI
endpoint framework (Wen Yang)
- Add interface to discover supported endpoint features to replace a
bitfield that wasn't flexible enough (Kishon Vijay Abraham I)
- Implement the new supported-feature interface for designware-plat,
dra7xx, rockchip, cadence (Kishon Vijay Abraham I)
- Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I)
- Add layerscape endpoint mode support (Xiaowei Bao)
- Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya
Nakamura)
- Rework hv_irq_unmask() to use cpumask_to_vpset() instead of open-coded
reimplementation (Maya Nakamura)
- Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura)
- Fix mediatek MMIO size computation to enable full size of available
MMIO space (Honghui Zhang)
- Fix mediatek DMA window size computation to allow endpoint DMA access
to full DRAM address range (Honghui Zhang)
- Fix mvebu prefetchable BAR regression caused by common bridge emulation
that assumed all bridges had prefetchable windows (Thomas Petazzoni)
- Make advk_pci_bridge_emul_ops static (Wei Yongjun)
- Configure MPS settings for VMD root ports (Jon Derrick)
The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v5.1-changes
for you to fetch changes up to dd92b6677e3d0d78e261a7f00f28e753bab41d24:
Merge branch 'remotes/lorenzo/pci/vmd' (2019-03-06 15:30:24 -0600)
----------------------------------------------------------------
pci-v5.1-changes
----------------------------------------------------------------
Alex Williamson (1):
PCI: Fix "try" semantics of bus and slot reset
Alexander Shishkin (1):
x86/PCI: Fixup RTIT_BAR of Intel Denverton Trace Hub
Alexandru Gagniuc (1):
PCI/LINK: Report degraded links via link bandwidth notification
Andrey Smirnov (11):
PCI: imx6: Introduce drvdata
PCI: imx6: Mark PHY functions as i.MX6 specific
PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag
PCI: imx6: Add support for i.MX8MQ
dt-bindings: imx6q-pcie: Add "pcie_aux" clock for imx8mq
PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ
PCI: dwc: Make use of IS_ALIGNED()
PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()
PCI: dwc: Make use of BIT() in constant definitions
PCI: dwc: Make use of GENMASK/FIELD_PREP
PCI: dwc: Remove superfluous shifting in definitions
Andy Shevchenko (2):
PCI/AER: Use match_string() helper to simplify the code
PCI: Move Rohm Vendor ID to generic list
Arnd Bergmann (1):
PCI: ibmphp: Turn semaphores into completions or mutexes
Bharat Kumar Gogada (1):
PCI: Enable SERR# forwarding for all bridges
Bjorn Andersson (1):
PCI: qcom: Don't deassert reset GPIO during probe
Bjorn Helgaas (21):
PCI: Probe bridge window attributes once at enumeration-time
PCI/ASPM: Use LTR if already enabled by platform
PCI/ASPM: Save LTR Capability for suspend/resume
PCI/portdrv: Use conventional Device ID table formatting
Merge branch 'pci/aer'
Merge branch 'pci/aspm'
Merge branch 'pci/dpc'
Merge branch 'pci/enumeration'
Merge branch 'pci/hotplug'
Merge branch 'pci/misc'
Merge branch 'pci/portdrv'
Merge branch 'pci/pm'
Merge branch 'remotes/lorenzo/pci/altera'
Merge branch 'remotes/lorenzo/pci/cadence'
Merge branch 'remotes/lorenzo/pci/dt'
Merge branch 'remotes/lorenzo/pci/dwc'
Merge branch 'remotes/lorenzo/pci/endpoint'
Merge branch 'remotes/lorenzo/pci/hv'
Merge branch 'remotes/lorenzo/pci/mediatek'
Merge branch 'remotes/lorenzo/pci/misc'
Merge branch 'remotes/lorenzo/pci/vmd'
Dongdong Liu (1):
PCI/DPC: Fix print AER status in DPC event handling
Du Changbin (1):
PCI: Make pci_size() return real BAR size
Fabrizio Castro (1):
dt-bindings: PCI: rcar: Add device tree support for r8a774c0
Gustavo Pimentel (9):
PCI: dwc: Remove unnecessary header include (of_gpio.h)
PCI: dwc: Remove unnecessary header include (signal.h)
PCI: dwc: Rename variable name from data to d on dw_pci_bottom_mask/unmask()
PCI: dwc: Rename variable name from data to d on dw_pci_setup_msi_msg()
PCI: dwc: Rename variable name from data to d on dw_pci_msi_set_affinity()
PCI: dwc: Rename variable name from data to d on dw_pcie_irq_domain_free()
PCI: dwc: Improve code readability and simplify mask/unmask operations
PCI: dwc: Replace bit rotation operation (1 << bit) with BIT(bit)
PCI: dwc: Print debug error message when MSI-X entry control mask bit is set
Honghui Zhang (4):
PCI: Rely on config space header type, not class code
PCI/portdrv: Support PCIe services on subtractive decode bridges
PCI: mediatek: Fix memory mapped IO range size computation
PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM
Hou Zhiqiang (1):
PCI: Update PCIEPORTBUS Kconfig help text
Jon Derrick (1):
PCI/VMD: Configure MPS settings before adding devices
Kishon Vijay Abraham I (19):
dt-bindings: PCI: dra7xx: Add SoC specific compatible strings
dt-bindings: PCI: dra7xx: Add properties to enable x2 lane in dra7
PCI: dwc: dra7xx: Enable x2 mode support for dra74x, dra76x and dra72x
PCI: dwc: dra7xx: Invoke phy_set_mode() API to set PHY mode to PHY_MODE_PCIE
PCI: endpoint: Add new pci_epc_ops to get EPC features
PCI: dwc: Add ->get_features() callback function to dw_pcie_ep_ops
PCI: designware-plat: Populate ->get_features() dw_pcie_ep_ops
PCI: pci-dra7xx: Populate ->get_features() dw_pcie_ep_ops
PCI: rockchip: Populate ->get_features() dw_pcie_ep_ops
PCI: cadence: Populate ->get_features() cdns_pcie_epc_ops
PCI: endpoint: Add helper to get first unreserved BAR
PCI: endpoint: Fix pci_epf_alloc_space() to set correct MEM TYPE flags
PCI: pci-epf-test: Remove setting epf_bar flags in function driver
PCI: pci-epf-test: Do not allocate next BARs memory if current BAR is 64Bit
PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features
PCI: cadence: Remove pci_epf_linkup() from Cadence EP driver
PCI: rockchip: Remove pci_epf_linkup() from Rockchip EP driver
PCI: designware-plat: Remove setting epc->features in Designware plat EP driver
PCI: endpoint: Remove features member in struct pci_epc
Ley Foon Tan (3):
PCI: altera: Add Stratix 10 PCIe support
PCI: altera: Enable driver on ARM64
dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
Logan Gunthorpe (2):
genirq/msi: Clean up usage of __u8/__u16 types
PCI: Clean up usage of __u32 type
Lorenzo Pieralisi (1):
MAINTAINERS: Update PCI Cadence maintainer entry
Lucas Stach (1):
PCI: dwc: skip MSI init if MSIs have been explicitly disabled
Mathieu Malaterre (1):
PCI: Mark expected switch fall-through
Maya Nakamura (3):
PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt
PCI: hv: Replace hv_vp_set with hv_vpset
PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
Mika Westerberg (4):
PCI: pciehp: Assign ctrl->slot_ctrl before writing it to hardware
PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
Revert "PCI/PME: Implement runtime PM callbacks"
PCI: pciehp: Disable Data Link Layer State Changed event on suspend
Rafael J. Wysocki (1):
PCI/PME: Fix hotplug/sysfs remove deadlock in pcie_pme_remove()
Rob Herring (1):
PCI: Use of_node_name_eq() for node name comparisons
Shunyong Yang (3):
PCI: Add HXT vendor ID
PCI: Add ACS quirk for HXT SD4800
PCI: pciehp: Add HXT quirk for Command Completed errata
Sven Van Asbroeck (1):
PCI/PME: Fix possible use-after-free on remove
Thomas Petazzoni (2):
PCI: pci-bridge-emul: Create per-bridge copy of register behavior
PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flags
Trent Piepho (3):
dt-bindings: imx6q-pcie: Add description of imx7d pcie phy
ARM: dts: imx7d: Add node for PCIe PHY
PCI: imx: Add workaround for e10728, IMX7d PCIe PLL failure
Wei Yongjun (1):
PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static
Wen Yang (1):
PCI: endpoint: functions: Use memcpy_fromio()/memcpy_toio()
Xiaowei Bao (4):
dt-bindings: add DT binding for the layerscape PCIe controller with EP mode
arm64: dts: Add the PCIE EP node in dts
PCI: layerscape: Add EP mode support
misc: pci_endpoint_test: Add the layerscape EP device support
.../devicetree/bindings/pci/altera-pcie.txt | 4 +-
.../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 18 +-
.../devicetree/bindings/pci/layerscape-pci.txt | 3 +
Documentation/devicetree/bindings/pci/rcar-pci.txt | 4 +-
Documentation/devicetree/bindings/pci/ti-pci.txt | 11 +-
MAINTAINERS | 2 +-
arch/arm/boot/dts/imx7d.dtsi | 9 +
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 34 ++-
arch/x86/hyperv/hv_init.c | 1 +
arch/x86/pci/fixup.c | 16 ++
drivers/dma/pch_dma.c | 1 -
drivers/gpio/gpio-ml-ioh.c | 2 -
drivers/gpio/gpio-pch.c | 1 -
drivers/i2c/busses/i2c-eg20t.c | 1 -
drivers/misc/pch_phub.c | 1 -
drivers/misc/pci_endpoint_test.c | 1 +
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 7 +-
drivers/pci/controller/Kconfig | 2 +-
drivers/pci/controller/dwc/Kconfig | 4 +-
drivers/pci/controller/dwc/Makefile | 2 +-
drivers/pci/controller/dwc/pci-dra7xx.c | 94 +++++++
drivers/pci/controller/dwc/pci-imx6.c | 224 +++++++++++++++--
drivers/pci/controller/dwc/pci-layerscape-ep.c | 156 ++++++++++++
drivers/pci/controller/dwc/pcie-designware-ep.c | 16 +-
drivers/pci/controller/dwc/pcie-designware-host.c | 115 ++++-----
drivers/pci/controller/dwc/pcie-designware-plat.c | 19 +-
drivers/pci/controller/dwc/pcie-designware.c | 6 +-
drivers/pci/controller/dwc/pcie-designware.h | 60 ++---
drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
drivers/pci/controller/pci-aardvark.c | 4 +-
drivers/pci/controller/pci-hyperv.c | 61 +++--
drivers/pci/controller/pci-mvebu.c | 2 +-
drivers/pci/controller/pcie-altera.c | 270 +++++++++++++++++++--
drivers/pci/controller/pcie-cadence-ep.c | 25 +-
drivers/pci/controller/pcie-mediatek.c | 13 +-
drivers/pci/controller/pcie-rockchip-ep.c | 16 +-
drivers/pci/controller/vmd.c | 15 +-
drivers/pci/endpoint/functions/pci-epf-test.c | 97 +++++---
drivers/pci/endpoint/pci-epc-core.c | 53 ++++
drivers/pci/endpoint/pci-epf-core.c | 4 +-
drivers/pci/hotplug/ibmphp.h | 1 -
drivers/pci/hotplug/ibmphp_core.c | 2 -
drivers/pci/hotplug/ibmphp_hpc.c | 47 ++--
drivers/pci/hotplug/pciehp_hpc.c | 21 +-
drivers/pci/of.c | 2 +-
drivers/pci/pci-bridge-emul.c | 86 ++++---
drivers/pci/pci-bridge-emul.h | 13 +-
drivers/pci/pci-driver.c | 4 +-
drivers/pci/pci.c | 136 ++++++++---
drivers/pci/pcie/Kconfig | 7 +-
drivers/pci/pcie/Makefile | 1 +
drivers/pci/pcie/aer.c | 9 +-
drivers/pci/pcie/bw_notification.c | 110 +++++++++
drivers/pci/pcie/dpc.c | 27 ++-
drivers/pci/pcie/pme.c | 48 ++--
drivers/pci/pcie/portdrv.h | 6 +-
drivers/pci/pcie/portdrv_core.c | 17 +-
drivers/pci/pcie/portdrv_pci.c | 9 +-
drivers/pci/probe.c | 120 +++++++--
drivers/pci/quirks.c | 4 +-
drivers/pci/setup-bus.c | 63 +----
drivers/spi/spi-topcliff-pch.c | 1 -
drivers/tty/serial/pch_uart.c | 2 -
drivers/usb/gadget/udc/pch_udc.c | 1 -
include/linux/msi.h | 12 +-
include/linux/pci-epc.h | 31 ++-
include/linux/pci.h | 3 +
include/linux/pci_ids.h | 4 +
68 files changed, 1648 insertions(+), 515 deletions(-)
create mode 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c
create mode 100644 drivers/pci/pcie/bw_notification.c
next reply other threads:[~2019-03-08 17:31 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-08 17:31 Bjorn Helgaas [this message]
2019-03-09 23:15 ` [GIT PULL] PCI changes for v5.1 pr-tracker-bot
2019-03-17 21:18 ` Linus Torvalds
2019-03-18 0:22 ` Alex G
2019-03-18 4:33 ` Lukas Wunner
2019-03-19 1:12 ` [PATCH] PCI/LINK: bw_notification: Do not leave interrupt handler NULL Alexandru Gagniuc
2019-03-19 19:25 ` Lukas Wunner
2019-03-19 20:00 ` Keith Busch
2019-03-20 13:46 ` Bjorn Helgaas
2019-03-20 13:48 ` Alex G.
2019-03-20 19:35 ` Bjorn Helgaas
2019-03-23 0:36 ` [PATCH v2] " Alexandru Gagniuc
2019-03-25 22:25 ` Bjorn Helgaas
2019-03-25 22:26 ` Alex G.
2019-03-25 22:59 ` Bjorn Helgaas
2019-04-19 21:08 ` Alex Williamson
2019-04-19 21:25 ` Bjorn Helgaas
2019-04-22 21:11 ` Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190308173154.GC214730@google.com \
--to=helgaas@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.