[PATCH v2] PCI: pciehp: Fix re-enabling the slot marked for safe removal

[Sergey Miroshnichenko <s.miroshnichenko@yadro.com>]

During the safe removal procedure, a Data Link Layer State Changed event
may occur after pciehp_power_off_slot(), and it is handled when the slot is
already set to OFF_STATE. This results in re-enabling the device and makes
it impossible to actually safely remove it.

Clear out the Presence Detect Changed and Data Link Layer State Changed
events when the disabled slot has settled down.

It is still possible to re-enable the device if it remains in the slot
after pressing the Attention Button by pressing it again.

Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
Cc: Lukas Wunner <lukas@wunner.de>
---
 drivers/pci/hotplug/pciehp_ctrl.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 3f3df4c29f6e..905282a8ddaa 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -115,6 +115,10 @@ static void remove_board(struct controller *ctrl, bool safe_removal)
 		 * removed from the slot/adapter.
 		 */
 		msleep(1000);
+
+		/* Ignore link or presence changes caused by power off */
+		atomic_and(~(PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC),
+			   &ctrl->pending_events);
 	}
 
 	/* turn off Green LED */
-- 
2.20.1