All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff King <peff@peff.net>
To: Eric Wong <e@80x24.org>
Cc: git@vger.kernel.org, "Ævar Arnfjörð Bjarmason" <avarab@gmail.com>
Subject: [PATCH 0/2] enable bitmap hash-cache by default
Date: Fri, 15 Mar 2019 02:21:33 -0400	[thread overview]
Message-ID: <20190315062133.GA13385@sigill.intra.peff.net> (raw)
In-Reply-To: <20190314160256.GA1573@sigill.intra.peff.net>

On Thu, Mar 14, 2019 at 12:02:56PM -0400, Jeff King wrote:

> On Thu, Mar 14, 2019 at 09:12:54AM +0000, Eric Wong wrote:
> 
> > > The reason it defaults to off is for on-disk compatibility with JGit.
> > 
> > Right.  Our documentation seems to indicate JGit just warns (but
> > doesn't fall over), so maybe that can be considered separately.
> 
> I think it was a hard error in the beginning, but they changed it pretty
> soon after we added more flags. So it might be reasonable to just enable
> it by default (but it wouldn't hurt to double check the behavior).
> 
> I tried running t5310 (which does a back-and-forth with jgit) using this
> patch:

I dug up the actual JGit change, and it was indeed from 2014. So here's
a more complete series to handle that. There's a minor performance
mystery in the second patch, but I think it might be OK to proceed even
without solving it.

Conceptually these go on top of your patch, but they could be applied
separately.

  [1/2]: t5310: correctly remove bitmaps for jgit test
  [2/2]: pack-objects: default to writing bitmap hash-cache

 Documentation/config/pack.txt      | 4 +---
 builtin/pack-objects.c             | 2 +-
 t/perf/p5310-pack-bitmaps.sh       | 3 +--
 t/perf/p5311-pack-bitmaps-fetch.sh | 1 -
 t/t5310-pack-bitmaps.sh            | 5 ++---
 5 files changed, 5 insertions(+), 10 deletions(-)

-Peff

  reply	other threads:[~2019-03-15  6:22 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-14  4:31 [PATCH 0/3] some prune optimizations Jeff King
2019-02-14  4:35 ` [PATCH 1/3] prune: lazily perform reachability traversal Jeff King
2019-02-14 10:54   ` Eric Sunshine
2019-02-14 11:07     ` Jeff King
2019-02-14  4:37 ` [PATCH 2/3] prune: use bitmaps for " Jeff King
2019-03-09  2:49   ` bitmaps by default? [was: prune: use bitmaps for reachability traversal] Eric Wong
2019-03-10 23:39     ` Jeff King
2019-03-12  3:13       ` [PATCH] repack: enable bitmaps by default on bare repos Eric Wong
2019-03-12  9:07         ` Ævar Arnfjörð Bjarmason
2019-03-12 10:49         ` Jeff King
2019-03-12 12:05           ` Jeff King
2019-03-13  1:51           ` Eric Wong
2019-03-13 14:54             ` Jeff King
2019-03-14  9:12               ` [PATCH v3] " Eric Wong
2019-03-14 16:02                 ` Jeff King
2019-03-15  6:21                   ` Jeff King [this message]
2019-03-15  6:22                     ` [PATCH 1/2] t5310: correctly remove bitmaps for jgit test Jeff King
2019-03-15 13:25                       ` SZEDER Gábor
2019-03-15 18:36                         ` Jeff King
2019-03-15  6:25                     ` [PATCH 2/2] pack-objects: default to writing bitmap hash-cache Jeff King
2019-04-09 15:10                 ` [PATCH v3] repack: enable bitmaps by default on bare repos Ævar Arnfjörð Bjarmason
2019-04-10 22:57                   ` Jeff King
2019-04-25  7:16                     ` Junio C Hamano
2019-05-04  1:37                       ` Jeff King
2019-05-04  6:52                         ` Ævar Arnfjörð Bjarmason
2019-05-04 13:23                           ` SZEDER Gábor
2019-05-08 20:17                             ` Ævar Arnfjörð Bjarmason
2019-05-09  4:24                               ` Junio C Hamano
2019-05-07  7:45                           ` Jeff King
2019-05-07  8:12                             ` Ævar Arnfjörð Bjarmason
2019-05-08  7:11                               ` Jeff King
2019-05-08 14:20                                 ` Derrick Stolee
2019-05-08 16:13                                 ` Ævar Arnfjörð Bjarmason
2019-05-08 22:25                                   ` Jeff King
2019-05-23 11:30                     ` Jeff King
2019-05-23 12:53                       ` Derrick Stolee
2019-05-24  7:24                         ` Jeff King
2019-05-24 10:33                           ` Derrick Stolee
2019-05-23 19:26                       ` Ævar Arnfjörð Bjarmason
2019-05-24  7:27                         ` Jeff King
2019-05-24  7:55                           ` Ævar Arnfjörð Bjarmason
2019-05-24  8:26                             ` Jeff King
2019-05-24  9:01                               ` Ævar Arnfjörð Bjarmason
2019-05-24  9:29                                 ` SZEDER Gábor
2019-05-24 11:17                                   ` Ævar Arnfjörð Bjarmason
2019-05-24 11:41                                     ` SZEDER Gábor
2019-05-24 11:58                                       ` Ævar Arnfjörð Bjarmason
2019-05-24 12:34                                         ` SZEDER Gábor
2019-05-24 13:41                                           ` Ævar Arnfjörð Bjarmason
2019-05-24 11:31                       ` [PATCH] pack-bitmap: look for an uninteresting bitmap Derrick Stolee
2019-04-15 15:00   ` [PATCH 2/3] prune: use bitmaps for reachability traversal Derrick Stolee
2019-04-18 19:49     ` Jeff King
2019-04-18 20:08       ` [PATCH] t5304: add a test for pruning with bitmaps Jeff King
2019-04-20  1:01         ` Derrick Stolee
2019-04-20  3:24           ` Jeff King
2019-04-20 21:01             ` Derrick Stolee
2019-02-14  4:38 ` [PATCH 3/3] prune: check SEEN flag for reachability Jeff King

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190315062133.GA13385@sigill.intra.peff.net \
    --to=peff@peff.net \
    --cc=avarab@gmail.com \
    --cc=e@80x24.org \
    --cc=git@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.