From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartosz Golaszewski Subject: [RESEND PATCH v6 03/11] dt-bindings: leds: add DT bindings for max77650 Date: Mon, 18 Mar 2019 18:42:20 +0100 Message-ID: <20190318174228.18194-4-brgl@bgdev.pl> References: <20190318174228.18194-1-brgl@bgdev.pl> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190318174228.18194-1-brgl@bgdev.pl> Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring , Mark Rutland , Linus Walleij , Dmitry Torokhov , Jacek Anaszewski , Pavel Machek , Lee Jones , Sebastian Reichel , Liam Girdwood , Greg Kroah-Hartman Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org, linux-pm@vger.kernel.org, Bartosz Golaszewski , Rob Herring List-Id: linux-leds@vger.kernel.org From: Bartosz Golaszewski Add the DT binding document for the LEDs module of max77650. Signed-off-by: Bartosz Golaszewski Reviewed-by: Rob Herring --- .../bindings/leds/leds-max77650.txt | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-max77650.txt diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.txt b/Documentation/devicetree/bindings/leds/leds-max77650.txt new file mode 100644 index 000000000000..3a67115cc1da --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-max77650.txt @@ -0,0 +1,57 @@ +LED driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The LED controller is represented as a sub-node of the PMIC node on +the device tree. + +This device has three current sinks. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-led" +- #address-cells: Must be <1>. +- #size-cells: Must be <0>. + +Each LED is represented as a sub-node of the LED-controller node. Up to +three sub-nodes can be defined. + +Required properties of the sub-node: +------------------------------------ + +- reg: Must be <0>, <1> or <2>. + +Optional properties of the sub-node: +------------------------------------ + +- label: See Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger: See Documentation/devicetree/bindings/leds/common.txt + +For more details, please refer to the generic GPIO DT binding document +. + +Example: +-------- + + leds { + compatible = "maxim,max77650-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "blue:usr0"; + }; + + led@1 { + reg = <1>; + label = "red:usr1"; + linux,default-trigger = "heartbeat"; + }; + + led@2 { + reg = <2>; + label = "green:usr2"; + }; + }; -- 2.20.1