All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@kernel.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
	Lee Jones <lee.jones@linaro.org>,
	Sebastian Reichel <sre@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sunxi@googlegroups.com, Hans de Goede <hdegoede@redhat.com>
Subject: [PATCH v3 9/9] ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards
Date: Thu, 21 Mar 2019 16:48:50 +0800	[thread overview]
Message-ID: <20190321084850.20769-10-wens@kernel.org> (raw)
In-Reply-To: <20190321084850.20769-1-wens@kernel.org>

From: Chen-Yu Tsai <wens@csie.org>

The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the
SoC and PMIC in the same way, with the N_VBUSEN pin on the PMIC
controlling VBUS output, the PMIC's VBUS input for sensing VBUS, and
PH11 on the SoC for sensing the ID pin.

Enable OTG on both boards.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts     | 12 ++++++++++++
 arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 12 ++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 838be7b3715f..9d34eabba121 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -389,7 +389,19 @@
 	};
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index fcbec3d7ccd7..ea299d3d84d0 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -420,7 +420,19 @@
 	};
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Maxime Ripard
	<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
	Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v3 9/9] ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards
Date: Thu, 21 Mar 2019 16:48:50 +0800	[thread overview]
Message-ID: <20190321084850.20769-10-wens@kernel.org> (raw)
In-Reply-To: <20190321084850.20769-1-wens-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>

The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the
SoC and PMIC in the same way, with the N_VBUSEN pin on the PMIC
controlling VBUS output, the PMIC's VBUS input for sensing VBUS, and
PH11 on the SoC for sensing the ID pin.

Enable OTG on both boards.

Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts     | 12 ++++++++++++
 arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 12 ++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 838be7b3715f..9d34eabba121 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -389,7 +389,19 @@
 	};
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index fcbec3d7ccd7..ea299d3d84d0 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -420,7 +420,19 @@
 	};
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
-- 
2.20.1

WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@kernel.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
	Lee Jones <lee.jones@linaro.org>,
	Sebastian Reichel <sre@kernel.org>
Cc: devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org,
	Hans de Goede <hdegoede@redhat.com>, Chen-Yu Tsai <wens@csie.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 9/9] ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards
Date: Thu, 21 Mar 2019 16:48:50 +0800	[thread overview]
Message-ID: <20190321084850.20769-10-wens@kernel.org> (raw)
In-Reply-To: <20190321084850.20769-1-wens@kernel.org>

From: Chen-Yu Tsai <wens@csie.org>

The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the
SoC and PMIC in the same way, with the N_VBUSEN pin on the PMIC
controlling VBUS output, the PMIC's VBUS input for sensing VBUS, and
PH11 on the SoC for sensing the ID pin.

Enable OTG on both boards.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts     | 12 ++++++++++++
 arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 12 ++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 838be7b3715f..9d34eabba121 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -389,7 +389,19 @@
 	};
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index fcbec3d7ccd7..ea299d3d84d0 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -420,7 +420,19 @@
 	};
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-03-21  8:49 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-21  8:48 [PATCH v3 0/9] ARM: sun8i: a83t: Enable USB OTG Chen-Yu Tsai
2019-03-21  8:48 ` Chen-Yu Tsai
2019-03-21  8:48 ` Chen-Yu Tsai
2019-03-21  8:48 ` [PATCH v3 1/9] dt-bindings: power: supply: axp20x_usb_power: add axp813 compatible Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48 ` [PATCH v3 2/9] power: supply: axp20x_usb_power: Fix typo in VBUS current limit macros Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48 ` [PATCH v3 3/9] power: supply: axp20x_usb_power: allow disabling input current limiting Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  9:30   ` Maxime Ripard
2019-03-21  9:30     ` Maxime Ripard
2019-03-21  9:30     ` Maxime Ripard
2019-03-25  2:45     ` [linux-sunxi] " Chen-Yu Tsai
2019-03-25  2:45       ` Chen-Yu Tsai
2019-03-25  2:45       ` Chen-Yu Tsai
2019-03-25  8:58       ` [linux-sunxi] " Hans de Goede
2019-03-25  8:58         ` Hans de Goede
2019-03-25  8:58         ` Hans de Goede
2019-03-25 10:12         ` [linux-sunxi] " Chen-Yu Tsai
2019-03-25 10:12           ` Chen-Yu Tsai
2019-03-21  8:48 ` [PATCH v3 4/9] power: supply: axp20x_usb_power: use polling to detect vbus status change Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48 ` [PATCH v3 5/9] power: supply: axp20x_usb_power: add function to get max current Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48 ` [PATCH v3 6/9] power: supply: axp20x_usb_power: add support for AXP813 Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48 ` [PATCH v3 7/9] mfd: axp20x: add USB power supply mfd cell to AXP813 Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-04-02  3:15   ` Lee Jones
2019-04-02  3:15     ` Lee Jones
2019-04-02  3:15     ` Lee Jones
2019-03-21  8:48 ` [PATCH v3 8/9] ARM: dtsi: axp81x: add USB power supply node Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai
2019-03-21  8:48 ` Chen-Yu Tsai [this message]
2019-03-21  8:48   ` [PATCH v3 9/9] ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards Chen-Yu Tsai
2019-03-21  8:48   ` Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190321084850.20769-10-wens@kernel.org \
    --to=wens@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hdegoede@redhat.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=sre@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.