[PATCH v5 0/8] PCI: DWC/Keystone: MSI configuration cleanup

[PATCH v5 0/8] PCI: DWC/Keystone: MSI configuration cleanup

[Kishon Vijay Abraham I]

This series tries to address the comments discussed in [1] w.r.t
removing Keystone specific callbacks defined in dw_pcie_host_ops.

This series also tries to cleanup the Keystone interrupt handling
part.

Changes from v4:
*) Removed legacy interrupt cleanup patch which uses hierarchy IRQ
   domain since TI platform uses edge interrupt for legacy interrupt.
   This will be deferred till I get more details from HW team.

Changes from v3:
*) Uses hierarchy IRQ domain for legacy interrupts since there is 1:1
   mapping between legacy interrupt and GIC IRQ.
   (MSI still depends on the order of IRQs populated in dt).

Changes from v2:
*) Removed patch that modifies ks_pcie_legacy_irq_handler() to check the
   IRQ_STATUS of INTA/B/C/D. Lorenzo's comment to create a matrix
   LinuxIRQ x INTx will be added in AM654x PCIe support series
*) ks_pcie_legacy_irq_handler() is made to use hwirq to get IRQ offset
   instead of virq.
*) default msi_irq_chip is assigned in dw_pcie_host_init() once keystone
   assigns its msi_irq_chip
*) Fixed other minor comments from Lorenzo and Bjorn

Changes from v1:
*) Removed "PCI: keystone: Use "dummy_irq_chip" instead of new irqchip
for legacy interrupt handling" from the patch series. It should be
handled differently.

*) Added Gustavo's ACKed by and fixed a commit message.

[1] -> https://patchwork.kernel.org/patch/10681587/

Kishon Vijay Abraham I (8):
  PCI: keystone: Cleanup interrupt related macros
  PCI: keystone: Add separate functions for configuring MSI and legacy
    interrupt
  PCI: keystone: Use hwirq to get the MSI IRQ number offset
  PCI: keystone: Cleanup ks_pcie_msi_irq_handler
  PCI: dwc: Add support to use non default msi_irq_chip
  PCI: keystone: Use Keystone specific msi_irq_chip
  PCI: dwc: Remove Keystone specific dw_pcie_host_ops
  PCI: dwc: Do not write to MSI control registers if the platform
    doesn't use it

 drivers/pci/controller/dwc/pci-keystone.c     | 365 ++++++++++--------
 .../pci/controller/dwc/pcie-designware-host.c |  78 ++--
 drivers/pci/controller/dwc/pcie-designware.h  |   6 +-
 3 files changed, 233 insertions(+), 216 deletions(-)

-- 
2.17.1

[PATCH v5 0/8] PCI: DWC/Keystone: MSI configuration cleanup

[Kishon Vijay Abraham I]

This series tries to address the comments discussed in [1] w.r.t
removing Keystone specific callbacks defined in dw_pcie_host_ops.

This series also tries to cleanup the Keystone interrupt handling
part.

Changes from v4:
*) Removed legacy interrupt cleanup patch which uses hierarchy IRQ
   domain since TI platform uses edge interrupt for legacy interrupt.
   This will be deferred till I get more details from HW team.

Changes from v3:
*) Uses hierarchy IRQ domain for legacy interrupts since there is 1:1
   mapping between legacy interrupt and GIC IRQ.
   (MSI still depends on the order of IRQs populated in dt).

Changes from v2:
*) Removed patch that modifies ks_pcie_legacy_irq_handler() to check the
   IRQ_STATUS of INTA/B/C/D. Lorenzo's comment to create a matrix
   LinuxIRQ x INTx will be added in AM654x PCIe support series
*) ks_pcie_legacy_irq_handler() is made to use hwirq to get IRQ offset
   instead of virq.
*) default msi_irq_chip is assigned in dw_pcie_host_init() once keystone
   assigns its msi_irq_chip
*) Fixed other minor comments from Lorenzo and Bjorn

Changes from v1:
*) Removed "PCI: keystone: Use "dummy_irq_chip" instead of new irqchip
for legacy interrupt handling" from the patch series. It should be
handled differently.

*) Added Gustavo's ACKed by and fixed a commit message.

[1] -> https://patchwork.kernel.org/patch/10681587/

Kishon Vijay Abraham I (8):
  PCI: keystone: Cleanup interrupt related macros
  PCI: keystone: Add separate functions for configuring MSI and legacy
    interrupt
  PCI: keystone: Use hwirq to get the MSI IRQ number offset
  PCI: keystone: Cleanup ks_pcie_msi_irq_handler
  PCI: dwc: Add support to use non default msi_irq_chip
  PCI: keystone: Use Keystone specific msi_irq_chip
  PCI: dwc: Remove Keystone specific dw_pcie_host_ops
  PCI: dwc: Do not write to MSI control registers if the platform
    doesn't use it

 drivers/pci/controller/dwc/pci-keystone.c     | 365 ++++++++++--------
 .../pci/controller/dwc/pcie-designware-host.c |  78 ++--
 drivers/pci/controller/dwc/pcie-designware.h  |   6 +-
 3 files changed, 233 insertions(+), 216 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 1/8] PCI: keystone: Cleanup interrupt related macros

[Kishon Vijay Abraham I]

No functional change. Change both MSI interrupt and legacy interrupt
related macros to take an additional argument in order to return the
correct register offset.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 26 +++++++++++------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 14f2b0b4ed5e..5286a480f76b 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -52,17 +52,17 @@
 
 /* IRQ register defines */
 #define IRQ_EOI				0x050
-#define IRQ_STATUS			0x184
-#define IRQ_ENABLE_SET			0x188
-#define IRQ_ENABLE_CLR			0x18c
 
 #define MSI_IRQ				0x054
-#define MSI0_IRQ_STATUS			0x104
-#define MSI0_IRQ_ENABLE_SET		0x108
-#define MSI0_IRQ_ENABLE_CLR		0x10c
-#define IRQ_STATUS			0x184
+#define MSI_IRQ_STATUS(n)		(0x104 + ((n) << 4))
+#define MSI_IRQ_ENABLE_SET(n)		(0x108 + ((n) << 4))
+#define MSI_IRQ_ENABLE_CLR(n)		(0x10c + ((n) << 4))
 #define MSI_IRQ_OFFSET			4
 
+#define IRQ_STATUS(n)			(0x184 + ((n) << 4))
+#define IRQ_ENABLE_SET(n)		(0x188 + ((n) << 4))
+#define INTx_EN				BIT(0)
+
 #define ERR_IRQ_STATUS			0x1c4
 #define ERR_IRQ_ENABLE_SET		0x1c8
 #define ERR_AER				BIT(5)	/* ECRC error */
@@ -142,7 +142,7 @@ static void ks_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset)
 	u32 pending, vector;
 	int src, virq;
 
-	pending = ks_pcie_app_readl(ks_pcie, MSI0_IRQ_STATUS + (offset << 4));
+	pending = ks_pcie_app_readl(ks_pcie, MSI_IRQ_STATUS(offset));
 
 	/*
 	 * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit
@@ -169,7 +169,7 @@ static void ks_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
 	ks_pcie = to_keystone_pcie(pci);
 	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
 
-	ks_pcie_app_writel(ks_pcie, MSI0_IRQ_STATUS + (reg_offset << 4),
+	ks_pcie_app_writel(ks_pcie, MSI_IRQ_STATUS(reg_offset),
 			   BIT(bit_pos));
 	ks_pcie_app_writel(ks_pcie, IRQ_EOI, reg_offset + MSI_IRQ_OFFSET);
 }
@@ -181,7 +181,7 @@ static void ks_pcie_msi_set_irq(struct pcie_port *pp, int irq)
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
 
 	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
-	ks_pcie_app_writel(ks_pcie, MSI0_IRQ_ENABLE_SET + (reg_offset << 4),
+	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_SET(reg_offset),
 			   BIT(bit_pos));
 }
 
@@ -192,7 +192,7 @@ static void ks_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
 
 	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
-	ks_pcie_app_writel(ks_pcie, MSI0_IRQ_ENABLE_CLR + (reg_offset << 4),
+	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_CLR(reg_offset),
 			   BIT(bit_pos));
 }
 
@@ -206,7 +206,7 @@ static void ks_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie)
 	int i;
 
 	for (i = 0; i < PCI_NUM_INTX; i++)
-		ks_pcie_app_writel(ks_pcie, IRQ_ENABLE_SET + (i << 4), 0x1);
+		ks_pcie_app_writel(ks_pcie, IRQ_ENABLE_SET(i), 0x1);
 }
 
 static void ks_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie,
@@ -217,7 +217,7 @@ static void ks_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie,
 	u32 pending;
 	int virq;
 
-	pending = ks_pcie_app_readl(ks_pcie, IRQ_STATUS + (offset << 4));
+	pending = ks_pcie_app_readl(ks_pcie, IRQ_STATUS(offset));
 
 	if (BIT(0) & pending) {
 		virq = irq_linear_revmap(ks_pcie->legacy_irq_domain, offset);
-- 
2.17.1

[PATCH v5 1/8] PCI: keystone: Cleanup interrupt related macros

[Kishon Vijay Abraham I]

No functional change. Change both MSI interrupt and legacy interrupt
related macros to take an additional argument in order to return the
correct register offset.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 26 +++++++++++------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 14f2b0b4ed5e..5286a480f76b 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -52,17 +52,17 @@
 
 /* IRQ register defines */
 #define IRQ_EOI				0x050
-#define IRQ_STATUS			0x184
-#define IRQ_ENABLE_SET			0x188
-#define IRQ_ENABLE_CLR			0x18c
 
 #define MSI_IRQ				0x054
-#define MSI0_IRQ_STATUS			0x104
-#define MSI0_IRQ_ENABLE_SET		0x108
-#define MSI0_IRQ_ENABLE_CLR		0x10c
-#define IRQ_STATUS			0x184
+#define MSI_IRQ_STATUS(n)		(0x104 + ((n) << 4))
+#define MSI_IRQ_ENABLE_SET(n)		(0x108 + ((n) << 4))
+#define MSI_IRQ_ENABLE_CLR(n)		(0x10c + ((n) << 4))
 #define MSI_IRQ_OFFSET			4
 
+#define IRQ_STATUS(n)			(0x184 + ((n) << 4))
+#define IRQ_ENABLE_SET(n)		(0x188 + ((n) << 4))
+#define INTx_EN				BIT(0)
+
 #define ERR_IRQ_STATUS			0x1c4
 #define ERR_IRQ_ENABLE_SET		0x1c8
 #define ERR_AER				BIT(5)	/* ECRC error */
@@ -142,7 +142,7 @@ static void ks_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset)
 	u32 pending, vector;
 	int src, virq;
 
-	pending = ks_pcie_app_readl(ks_pcie, MSI0_IRQ_STATUS + (offset << 4));
+	pending = ks_pcie_app_readl(ks_pcie, MSI_IRQ_STATUS(offset));
 
 	/*
 	 * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit
@@ -169,7 +169,7 @@ static void ks_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
 	ks_pcie = to_keystone_pcie(pci);
 	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
 
-	ks_pcie_app_writel(ks_pcie, MSI0_IRQ_STATUS + (reg_offset << 4),
+	ks_pcie_app_writel(ks_pcie, MSI_IRQ_STATUS(reg_offset),
 			   BIT(bit_pos));
 	ks_pcie_app_writel(ks_pcie, IRQ_EOI, reg_offset + MSI_IRQ_OFFSET);
 }
@@ -181,7 +181,7 @@ static void ks_pcie_msi_set_irq(struct pcie_port *pp, int irq)
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
 
 	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
-	ks_pcie_app_writel(ks_pcie, MSI0_IRQ_ENABLE_SET + (reg_offset << 4),
+	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_SET(reg_offset),
 			   BIT(bit_pos));
 }
 
@@ -192,7 +192,7 @@ static void ks_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
 
 	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
-	ks_pcie_app_writel(ks_pcie, MSI0_IRQ_ENABLE_CLR + (reg_offset << 4),
+	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_CLR(reg_offset),
 			   BIT(bit_pos));
 }
 
@@ -206,7 +206,7 @@ static void ks_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie)
 	int i;
 
 	for (i = 0; i < PCI_NUM_INTX; i++)
-		ks_pcie_app_writel(ks_pcie, IRQ_ENABLE_SET + (i << 4), 0x1);
+		ks_pcie_app_writel(ks_pcie, IRQ_ENABLE_SET(i), 0x1);
 }
 
 static void ks_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie,
@@ -217,7 +217,7 @@ static void ks_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie,
 	u32 pending;
 	int virq;
 
-	pending = ks_pcie_app_readl(ks_pcie, IRQ_STATUS + (offset << 4));
+	pending = ks_pcie_app_readl(ks_pcie, IRQ_STATUS(offset));
 
 	if (BIT(0) & pending) {
 		virq = irq_linear_revmap(ks_pcie->legacy_irq_domain, offset);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 2/8] PCI: keystone: Add separate functions for configuring MSI and legacy interrupt

[Kishon Vijay Abraham I]

ks_pcie_get_irq_controller_info() is used to configure both MSI and
legacy interrupt. This will prevent MSI or legacy interrupt specific
intializations. Add separate functions to configure MSI and legacy
interrupts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 181 +++++++++++-----------
 1 file changed, 89 insertions(+), 92 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 5286a480f76b..47f0dcf638f2 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -87,11 +87,9 @@ struct keystone_pcie {
 	struct dw_pcie		*pci;
 	/* PCI Device ID */
 	u32			device_id;
-	int			num_legacy_host_irqs;
 	int			legacy_host_irqs[PCI_NUM_INTX];
 	struct			device_node *legacy_intc_np;
 
-	int			num_msi_host_irqs;
 	int			msi_host_irqs[MAX_MSI_HOST_IRQS];
 	int			num_lanes;
 	u32			num_viewport;
@@ -201,14 +199,6 @@ static int ks_pcie_msi_host_init(struct pcie_port *pp)
 	return dw_pcie_allocate_domains(pp);
 }
 
-static void ks_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie)
-{
-	int i;
-
-	for (i = 0; i < PCI_NUM_INTX; i++)
-		ks_pcie_app_writel(ks_pcie, IRQ_ENABLE_SET(i), 0x1);
-}
-
 static void ks_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie,
 				      int offset)
 {
@@ -495,17 +485,6 @@ static int __init ks_pcie_dw_host_init(struct keystone_pcie *ks_pcie)
 
 	ks_pcie->app = *res;
 
-	/* Create legacy IRQ domain */
-	ks_pcie->legacy_irq_domain =
-			irq_domain_add_linear(ks_pcie->legacy_intc_np,
-					      PCI_NUM_INTX,
-					      &ks_pcie_legacy_irq_domain_ops,
-					      NULL);
-	if (!ks_pcie->legacy_irq_domain) {
-		dev_err(dev, "Failed to add irq domain for legacy irqs\n");
-		return -EINVAL;
-	}
-
 	return dw_pcie_host_init(pp);
 }
 
@@ -622,85 +601,109 @@ static void ks_pcie_legacy_irq_handler(struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static int ks_pcie_get_irq_controller_info(struct keystone_pcie *ks_pcie,
-					   char *controller, int *num_irqs)
+static int ks_pcie_config_msi_irq(struct keystone_pcie *ks_pcie)
 {
-	int temp, max_host_irqs, legacy = 1, *host_irqs;
 	struct device *dev = ks_pcie->pci->dev;
-	struct device_node *np_pcie = dev->of_node, **np_temp;
-
-	if (!strcmp(controller, "msi-interrupt-controller"))
-		legacy = 0;
-
-	if (legacy) {
-		np_temp = &ks_pcie->legacy_intc_np;
-		max_host_irqs = PCI_NUM_INTX;
-		host_irqs = &ks_pcie->legacy_host_irqs[0];
-	} else {
-		np_temp = &ks_pcie->msi_intc_np;
-		max_host_irqs = MAX_MSI_HOST_IRQS;
-		host_irqs =  &ks_pcie->msi_host_irqs[0];
-	}
+	struct device_node *np = ks_pcie->np;
+	struct device_node *intc_np;
+	int irq_count, irq, ret, i;
 
-	/* interrupt controller is in a child node */
-	*np_temp = of_get_child_by_name(np_pcie, controller);
-	if (!(*np_temp)) {
-		dev_err(dev, "Node for %s is absent\n", controller);
-		return -EINVAL;
-	}
+	if (!IS_ENABLED(CONFIG_PCI_MSI))
+		return 0;
 
-	temp = of_irq_count(*np_temp);
-	if (!temp) {
-		dev_err(dev, "No IRQ entries in %s\n", controller);
-		of_node_put(*np_temp);
+	intc_np = of_get_child_by_name(np, "msi-interrupt-controller");
+	if (!intc_np) {
+		dev_warn(dev, "msi-interrupt-controller node is absent\n");
 		return -EINVAL;
 	}
 
-	if (temp > max_host_irqs)
-		dev_warn(dev, "Too many %s interrupts defined %u\n",
-			(legacy ? "legacy" : "MSI"), temp);
+	irq_count = of_irq_count(intc_np);
+	if (!irq_count) {
+		dev_err(dev, "No IRQ entries in msi-interrupt-controller\n");
+		ret = -EINVAL;
+		goto err;
+	}
 
-	/*
-	 * support upto max_host_irqs. In dt from index 0 to 3 (legacy) or 0 to
-	 * 7 (MSI)
-	 */
-	for (temp = 0; temp < max_host_irqs; temp++) {
-		host_irqs[temp] = irq_of_parse_and_map(*np_temp, temp);
-		if (!host_irqs[temp])
-			break;
+	if (irq_count > MAX_MSI_HOST_IRQS) {
+		dev_warn(dev, "Too many MSI interrupt lines defined %u\n",
+			 irq_count);
+		irq_count = MAX_MSI_HOST_IRQS;
 	}
 
-	of_node_put(*np_temp);
+	for (i = 0; i < irq_count; i++) {
+		irq = irq_of_parse_and_map(intc_np, i);
+		if (!irq) {
+			ret = -EINVAL;
+			goto err;
+		}
+		ks_pcie->msi_host_irqs[i] = irq;
 
-	if (temp) {
-		*num_irqs = temp;
-		return 0;
+		irq_set_chained_handler_and_data(irq, ks_pcie_msi_irq_handler,
+						 ks_pcie);
 	}
 
-	return -EINVAL;
+	of_node_put(intc_np);
+	return 0;
+
+err:
+	of_node_put(intc_np);
+	return ret;
 }
 
-static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
+static int ks_pcie_config_legacy_irq(struct keystone_pcie *ks_pcie)
 {
-	int i;
+	struct device *dev = ks_pcie->pci->dev;
+	struct irq_domain *legacy_irq_domain;
+	struct device_node *np = ks_pcie->np;
+	struct device_node *intc_np;
+	int irq_count, irq, ret = 0, i;
+
+	intc_np = of_get_child_by_name(np, "legacy-interrupt-controller");
+	if (!intc_np) {
+		dev_warn(dev, "legacy-interrupt-controller node is absent\n");
+		return -EINVAL;
+	}
+
+	irq_count = of_irq_count(intc_np);
+	if (!irq_count) {
+		dev_err(dev, "No IRQ entries in legacy-interrupt-controller\n");
+		ret = -EINVAL;
+		goto err;
+	}
 
-	/* Legacy IRQ */
-	for (i = 0; i < ks_pcie->num_legacy_host_irqs; i++) {
-		irq_set_chained_handler_and_data(ks_pcie->legacy_host_irqs[i],
+	for (i = 0; i < irq_count; i++) {
+		irq = irq_of_parse_and_map(intc_np, i);
+		if (!irq) {
+			ret = -EINVAL;
+			goto err;
+		}
+		ks_pcie->legacy_host_irqs[i] = irq;
+
+		irq_set_chained_handler_and_data(irq,
 						 ks_pcie_legacy_irq_handler,
 						 ks_pcie);
 	}
-	ks_pcie_enable_legacy_irqs(ks_pcie);
-
-	/* MSI IRQ */
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		for (i = 0; i < ks_pcie->num_msi_host_irqs; i++) {
-			irq_set_chained_handler_and_data(ks_pcie->msi_host_irqs[i],
-							 ks_pcie_msi_irq_handler,
-							 ks_pcie);
-		}
+
+	legacy_irq_domain =
+		irq_domain_add_linear(intc_np, PCI_NUM_INTX,
+				      &ks_pcie_legacy_irq_domain_ops, NULL);
+	if (!legacy_irq_domain) {
+		dev_err(dev, "Failed to add irq domain for legacy irqs\n");
+		ret = -EINVAL;
+		goto err;
 	}
+	ks_pcie->legacy_irq_domain = legacy_irq_domain;
+
+	for (i = 0; i < PCI_NUM_INTX; i++)
+		ks_pcie_app_writel(ks_pcie, IRQ_ENABLE_SET(i), INTx_EN);
+
+err:
+	of_node_put(intc_np);
+	return ret;
+}
 
+static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
+{
 	if (ks_pcie->error_irq > 0)
 		ks_pcie_enable_error_irq(ks_pcie);
 }
@@ -754,6 +757,14 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
 	int ret;
 
+	ret = ks_pcie_config_legacy_irq(ks_pcie);
+	if (ret)
+		return ret;
+
+	ret = ks_pcie_config_msi_irq(ks_pcie);
+	if (ret)
+		return ret;
+
 	dw_pcie_setup_rc(pp);
 
 	ks_pcie_establish_link(ks_pcie);
@@ -803,20 +814,6 @@ static int __init ks_pcie_add_pcie_port(struct keystone_pcie *ks_pcie,
 	struct device *dev = &pdev->dev;
 	int ret;
 
-	ret = ks_pcie_get_irq_controller_info(ks_pcie,
-					"legacy-interrupt-controller",
-					&ks_pcie->num_legacy_host_irqs);
-	if (ret)
-		return ret;
-
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		ret = ks_pcie_get_irq_controller_info(ks_pcie,
-						"msi-interrupt-controller",
-						&ks_pcie->num_msi_host_irqs);
-		if (ret)
-			return ret;
-	}
-
 	/*
 	 * Index 0 is the platform interrupt for error interrupt
 	 * from RC.  This is optional.
-- 
2.17.1

[PATCH v5 2/8] PCI: keystone: Add separate functions for configuring MSI and legacy interrupt

[Kishon Vijay Abraham I]

ks_pcie_get_irq_controller_info() is used to configure both MSI and
legacy interrupt. This will prevent MSI or legacy interrupt specific
intializations. Add separate functions to configure MSI and legacy
interrupts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 181 +++++++++++-----------
 1 file changed, 89 insertions(+), 92 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 5286a480f76b..47f0dcf638f2 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -87,11 +87,9 @@ struct keystone_pcie {
 	struct dw_pcie		*pci;
 	/* PCI Device ID */
 	u32			device_id;
-	int			num_legacy_host_irqs;
 	int			legacy_host_irqs[PCI_NUM_INTX];
 	struct			device_node *legacy_intc_np;
 
-	int			num_msi_host_irqs;
 	int			msi_host_irqs[MAX_MSI_HOST_IRQS];
 	int			num_lanes;
 	u32			num_viewport;
@@ -201,14 +199,6 @@ static int ks_pcie_msi_host_init(struct pcie_port *pp)
 	return dw_pcie_allocate_domains(pp);
 }
 
-static void ks_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie)
-{
-	int i;
-
-	for (i = 0; i < PCI_NUM_INTX; i++)
-		ks_pcie_app_writel(ks_pcie, IRQ_ENABLE_SET(i), 0x1);
-}
-
 static void ks_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie,
 				      int offset)
 {
@@ -495,17 +485,6 @@ static int __init ks_pcie_dw_host_init(struct keystone_pcie *ks_pcie)
 
 	ks_pcie->app = *res;
 
-	/* Create legacy IRQ domain */
-	ks_pcie->legacy_irq_domain =
-			irq_domain_add_linear(ks_pcie->legacy_intc_np,
-					      PCI_NUM_INTX,
-					      &ks_pcie_legacy_irq_domain_ops,
-					      NULL);
-	if (!ks_pcie->legacy_irq_domain) {
-		dev_err(dev, "Failed to add irq domain for legacy irqs\n");
-		return -EINVAL;
-	}
-
 	return dw_pcie_host_init(pp);
 }
 
@@ -622,85 +601,109 @@ static void ks_pcie_legacy_irq_handler(struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static int ks_pcie_get_irq_controller_info(struct keystone_pcie *ks_pcie,
-					   char *controller, int *num_irqs)
+static int ks_pcie_config_msi_irq(struct keystone_pcie *ks_pcie)
 {
-	int temp, max_host_irqs, legacy = 1, *host_irqs;
 	struct device *dev = ks_pcie->pci->dev;
-	struct device_node *np_pcie = dev->of_node, **np_temp;
-
-	if (!strcmp(controller, "msi-interrupt-controller"))
-		legacy = 0;
-
-	if (legacy) {
-		np_temp = &ks_pcie->legacy_intc_np;
-		max_host_irqs = PCI_NUM_INTX;
-		host_irqs = &ks_pcie->legacy_host_irqs[0];
-	} else {
-		np_temp = &ks_pcie->msi_intc_np;
-		max_host_irqs = MAX_MSI_HOST_IRQS;
-		host_irqs =  &ks_pcie->msi_host_irqs[0];
-	}
+	struct device_node *np = ks_pcie->np;
+	struct device_node *intc_np;
+	int irq_count, irq, ret, i;
 
-	/* interrupt controller is in a child node */
-	*np_temp = of_get_child_by_name(np_pcie, controller);
-	if (!(*np_temp)) {
-		dev_err(dev, "Node for %s is absent\n", controller);
-		return -EINVAL;
-	}
+	if (!IS_ENABLED(CONFIG_PCI_MSI))
+		return 0;
 
-	temp = of_irq_count(*np_temp);
-	if (!temp) {
-		dev_err(dev, "No IRQ entries in %s\n", controller);
-		of_node_put(*np_temp);
+	intc_np = of_get_child_by_name(np, "msi-interrupt-controller");
+	if (!intc_np) {
+		dev_warn(dev, "msi-interrupt-controller node is absent\n");
 		return -EINVAL;
 	}
 
-	if (temp > max_host_irqs)
-		dev_warn(dev, "Too many %s interrupts defined %u\n",
-			(legacy ? "legacy" : "MSI"), temp);
+	irq_count = of_irq_count(intc_np);
+	if (!irq_count) {
+		dev_err(dev, "No IRQ entries in msi-interrupt-controller\n");
+		ret = -EINVAL;
+		goto err;
+	}
 
-	/*
-	 * support upto max_host_irqs. In dt from index 0 to 3 (legacy) or 0 to
-	 * 7 (MSI)
-	 */
-	for (temp = 0; temp < max_host_irqs; temp++) {
-		host_irqs[temp] = irq_of_parse_and_map(*np_temp, temp);
-		if (!host_irqs[temp])
-			break;
+	if (irq_count > MAX_MSI_HOST_IRQS) {
+		dev_warn(dev, "Too many MSI interrupt lines defined %u\n",
+			 irq_count);
+		irq_count = MAX_MSI_HOST_IRQS;
 	}
 
-	of_node_put(*np_temp);
+	for (i = 0; i < irq_count; i++) {
+		irq = irq_of_parse_and_map(intc_np, i);
+		if (!irq) {
+			ret = -EINVAL;
+			goto err;
+		}
+		ks_pcie->msi_host_irqs[i] = irq;
 
-	if (temp) {
-		*num_irqs = temp;
-		return 0;
+		irq_set_chained_handler_and_data(irq, ks_pcie_msi_irq_handler,
+						 ks_pcie);
 	}
 
-	return -EINVAL;
+	of_node_put(intc_np);
+	return 0;
+
+err:
+	of_node_put(intc_np);
+	return ret;
 }
 
-static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
+static int ks_pcie_config_legacy_irq(struct keystone_pcie *ks_pcie)
 {
-	int i;
+	struct device *dev = ks_pcie->pci->dev;
+	struct irq_domain *legacy_irq_domain;
+	struct device_node *np = ks_pcie->np;
+	struct device_node *intc_np;
+	int irq_count, irq, ret = 0, i;
+
+	intc_np = of_get_child_by_name(np, "legacy-interrupt-controller");
+	if (!intc_np) {
+		dev_warn(dev, "legacy-interrupt-controller node is absent\n");
+		return -EINVAL;
+	}
+
+	irq_count = of_irq_count(intc_np);
+	if (!irq_count) {
+		dev_err(dev, "No IRQ entries in legacy-interrupt-controller\n");
+		ret = -EINVAL;
+		goto err;
+	}
 
-	/* Legacy IRQ */
-	for (i = 0; i < ks_pcie->num_legacy_host_irqs; i++) {
-		irq_set_chained_handler_and_data(ks_pcie->legacy_host_irqs[i],
+	for (i = 0; i < irq_count; i++) {
+		irq = irq_of_parse_and_map(intc_np, i);
+		if (!irq) {
+			ret = -EINVAL;
+			goto err;
+		}
+		ks_pcie->legacy_host_irqs[i] = irq;
+
+		irq_set_chained_handler_and_data(irq,
 						 ks_pcie_legacy_irq_handler,
 						 ks_pcie);
 	}
-	ks_pcie_enable_legacy_irqs(ks_pcie);
-
-	/* MSI IRQ */
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		for (i = 0; i < ks_pcie->num_msi_host_irqs; i++) {
-			irq_set_chained_handler_and_data(ks_pcie->msi_host_irqs[i],
-							 ks_pcie_msi_irq_handler,
-							 ks_pcie);
-		}
+
+	legacy_irq_domain =
+		irq_domain_add_linear(intc_np, PCI_NUM_INTX,
+				      &ks_pcie_legacy_irq_domain_ops, NULL);
+	if (!legacy_irq_domain) {
+		dev_err(dev, "Failed to add irq domain for legacy irqs\n");
+		ret = -EINVAL;
+		goto err;
 	}
+	ks_pcie->legacy_irq_domain = legacy_irq_domain;
+
+	for (i = 0; i < PCI_NUM_INTX; i++)
+		ks_pcie_app_writel(ks_pcie, IRQ_ENABLE_SET(i), INTx_EN);
+
+err:
+	of_node_put(intc_np);
+	return ret;
+}
 
+static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
+{
 	if (ks_pcie->error_irq > 0)
 		ks_pcie_enable_error_irq(ks_pcie);
 }
@@ -754,6 +757,14 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
 	int ret;
 
+	ret = ks_pcie_config_legacy_irq(ks_pcie);
+	if (ret)
+		return ret;
+
+	ret = ks_pcie_config_msi_irq(ks_pcie);
+	if (ret)
+		return ret;
+
 	dw_pcie_setup_rc(pp);
 
 	ks_pcie_establish_link(ks_pcie);
@@ -803,20 +814,6 @@ static int __init ks_pcie_add_pcie_port(struct keystone_pcie *ks_pcie,
 	struct device *dev = &pdev->dev;
 	int ret;
 
-	ret = ks_pcie_get_irq_controller_info(ks_pcie,
-					"legacy-interrupt-controller",
-					&ks_pcie->num_legacy_host_irqs);
-	if (ret)
-		return ret;
-
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		ret = ks_pcie_get_irq_controller_info(ks_pcie,
-						"msi-interrupt-controller",
-						&ks_pcie->num_msi_host_irqs);
-		if (ret)
-			return ret;
-	}
-
 	/*
 	 * Index 0 is the platform interrupt for error interrupt
 	 * from RC.  This is optional.
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 3/8] PCI: keystone: Use hwirq to get the MSI IRQ number offset

[Kishon Vijay Abraham I]

ks_pcie_msi_irq_handler() uses 'virq' to get the IRQ number offset.
This offset is used to get the correct MSI_IRQ_STATUS register
corresponding to the IRQ line that raised the interrupt.
There is no guarantee that 'virq' assigned for consecutive hardware
IRQ will be contiguous. And this might get us an incorrect IRQ number
offset.

Fix it here by using 'hwirq' to get the IRQ number offset. Since we
don't store the 'virq' numbers of all the IRQ numbers, stop checking
if irq count is greater than MAX_MSI_HOST_IRQS and remove
MAX_MSI_HOST_IRQS.

Link: https://lkml.kernel.org/r/bb081d21-7c03-0357-4294-7e92d95d838c@arm.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 24 ++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 47f0dcf638f2..fce25a0dcd08 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -74,7 +74,6 @@
 #define ERR_IRQ_ALL			(ERR_AER | ERR_AXI | ERR_CORR | \
 					 ERR_NONFATAL | ERR_FATAL | ERR_SYS)
 
-#define MAX_MSI_HOST_IRQS		8
 /* PCIE controller device IDs */
 #define PCIE_RC_K2HK			0xb008
 #define PCIE_RC_K2E			0xb009
@@ -90,7 +89,7 @@ struct keystone_pcie {
 	int			legacy_host_irqs[PCI_NUM_INTX];
 	struct			device_node *legacy_intc_np;
 
-	int			msi_host_irqs[MAX_MSI_HOST_IRQS];
+	int			msi_host_irq;
 	int			num_lanes;
 	u32			num_viewport;
 	struct phy		**phy;
@@ -553,9 +552,9 @@ static int ks_pcie_establish_link(struct keystone_pcie *ks_pcie)
 
 static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
 {
-	unsigned int irq = irq_desc_get_irq(desc);
+	unsigned int irq = desc->irq_data.hwirq;
 	struct keystone_pcie *ks_pcie = irq_desc_get_handler_data(desc);
-	u32 offset = irq - ks_pcie->msi_host_irqs[0];
+	u32 offset = irq - ks_pcie->msi_host_irq;
 	struct dw_pcie *pci = ks_pcie->pci;
 	struct device *dev = pci->dev;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -606,6 +605,7 @@ static int ks_pcie_config_msi_irq(struct keystone_pcie *ks_pcie)
 	struct device *dev = ks_pcie->pci->dev;
 	struct device_node *np = ks_pcie->np;
 	struct device_node *intc_np;
+	struct irq_data *irq_data;
 	int irq_count, irq, ret, i;
 
 	if (!IS_ENABLED(CONFIG_PCI_MSI))
@@ -624,19 +624,21 @@ static int ks_pcie_config_msi_irq(struct keystone_pcie *ks_pcie)
 		goto err;
 	}
 
-	if (irq_count > MAX_MSI_HOST_IRQS) {
-		dev_warn(dev, "Too many MSI interrupt lines defined %u\n",
-			 irq_count);
-		irq_count = MAX_MSI_HOST_IRQS;
-	}
-
 	for (i = 0; i < irq_count; i++) {
 		irq = irq_of_parse_and_map(intc_np, i);
 		if (!irq) {
 			ret = -EINVAL;
 			goto err;
 		}
-		ks_pcie->msi_host_irqs[i] = irq;
+
+		if (!ks_pcie->msi_host_irq) {
+			irq_data = irq_get_irq_data(irq);
+			if (!irq_data) {
+				ret = -EINVAL;
+				goto err;
+			}
+			ks_pcie->msi_host_irq = irq_data->hwirq;
+		}
 
 		irq_set_chained_handler_and_data(irq, ks_pcie_msi_irq_handler,
 						 ks_pcie);
-- 
2.17.1

[PATCH v5 3/8] PCI: keystone: Use hwirq to get the MSI IRQ number offset

[Kishon Vijay Abraham I]

ks_pcie_msi_irq_handler() uses 'virq' to get the IRQ number offset.
This offset is used to get the correct MSI_IRQ_STATUS register
corresponding to the IRQ line that raised the interrupt.
There is no guarantee that 'virq' assigned for consecutive hardware
IRQ will be contiguous. And this might get us an incorrect IRQ number
offset.

Fix it here by using 'hwirq' to get the IRQ number offset. Since we
don't store the 'virq' numbers of all the IRQ numbers, stop checking
if irq count is greater than MAX_MSI_HOST_IRQS and remove
MAX_MSI_HOST_IRQS.

Link: https://lkml.kernel.org/r/bb081d21-7c03-0357-4294-7e92d95d838c@arm.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 24 ++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 47f0dcf638f2..fce25a0dcd08 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -74,7 +74,6 @@
 #define ERR_IRQ_ALL			(ERR_AER | ERR_AXI | ERR_CORR | \
 					 ERR_NONFATAL | ERR_FATAL | ERR_SYS)
 
-#define MAX_MSI_HOST_IRQS		8
 /* PCIE controller device IDs */
 #define PCIE_RC_K2HK			0xb008
 #define PCIE_RC_K2E			0xb009
@@ -90,7 +89,7 @@ struct keystone_pcie {
 	int			legacy_host_irqs[PCI_NUM_INTX];
 	struct			device_node *legacy_intc_np;
 
-	int			msi_host_irqs[MAX_MSI_HOST_IRQS];
+	int			msi_host_irq;
 	int			num_lanes;
 	u32			num_viewport;
 	struct phy		**phy;
@@ -553,9 +552,9 @@ static int ks_pcie_establish_link(struct keystone_pcie *ks_pcie)
 
 static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
 {
-	unsigned int irq = irq_desc_get_irq(desc);
+	unsigned int irq = desc->irq_data.hwirq;
 	struct keystone_pcie *ks_pcie = irq_desc_get_handler_data(desc);
-	u32 offset = irq - ks_pcie->msi_host_irqs[0];
+	u32 offset = irq - ks_pcie->msi_host_irq;
 	struct dw_pcie *pci = ks_pcie->pci;
 	struct device *dev = pci->dev;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -606,6 +605,7 @@ static int ks_pcie_config_msi_irq(struct keystone_pcie *ks_pcie)
 	struct device *dev = ks_pcie->pci->dev;
 	struct device_node *np = ks_pcie->np;
 	struct device_node *intc_np;
+	struct irq_data *irq_data;
 	int irq_count, irq, ret, i;
 
 	if (!IS_ENABLED(CONFIG_PCI_MSI))
@@ -624,19 +624,21 @@ static int ks_pcie_config_msi_irq(struct keystone_pcie *ks_pcie)
 		goto err;
 	}
 
-	if (irq_count > MAX_MSI_HOST_IRQS) {
-		dev_warn(dev, "Too many MSI interrupt lines defined %u\n",
-			 irq_count);
-		irq_count = MAX_MSI_HOST_IRQS;
-	}
-
 	for (i = 0; i < irq_count; i++) {
 		irq = irq_of_parse_and_map(intc_np, i);
 		if (!irq) {
 			ret = -EINVAL;
 			goto err;
 		}
-		ks_pcie->msi_host_irqs[i] = irq;
+
+		if (!ks_pcie->msi_host_irq) {
+			irq_data = irq_get_irq_data(irq);
+			if (!irq_data) {
+				ret = -EINVAL;
+				goto err;
+			}
+			ks_pcie->msi_host_irq = irq_data->hwirq;
+		}
 
 		irq_set_chained_handler_and_data(irq, ks_pcie_msi_irq_handler,
 						 ks_pcie);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 4/8] PCI: keystone: Cleanup ks_pcie_msi_irq_handler

[Kishon Vijay Abraham I]

ks_pcie_msi_irq_handler() invokes ks_pcie_handle_msi_irq() for handling
the interrupts.

Having two functions for handling the interrupt was used when keystone
PCIe driver was implemented using two files. But with
commit b492aca35c982011500377797d2 ("PCI: keystone: Merge
pci-keystone-dw.c and pci-keystone.c"), which merged the keystone PCIe
driver to use a single file, two functions for handling the
interrupt handler is not required.

Handle MSI interrupt in a single interrupt handler here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 64 ++++++++++-------------
 1 file changed, 28 insertions(+), 36 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index fce25a0dcd08..39542f2c312b 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -105,13 +105,6 @@ struct keystone_pcie {
 	struct resource		app;
 };
 
-static inline void update_reg_offset_bit_pos(u32 offset, u32 *reg_offset,
-					     u32 *bit_pos)
-{
-	*reg_offset = offset % 8;
-	*bit_pos = offset >> 3;
-}
-
 static phys_addr_t ks_pcie_get_msi_addr(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -131,31 +124,6 @@ static void ks_pcie_app_writel(struct keystone_pcie *ks_pcie, u32 offset,
 	writel(val, ks_pcie->va_app_base + offset);
 }
 
-static void ks_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset)
-{
-	struct dw_pcie *pci = ks_pcie->pci;
-	struct pcie_port *pp = &pci->pp;
-	struct device *dev = pci->dev;
-	u32 pending, vector;
-	int src, virq;
-
-	pending = ks_pcie_app_readl(ks_pcie, MSI_IRQ_STATUS(offset));
-
-	/*
-	 * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit
-	 * shows 1, 9, 17, 25 and so forth
-	 */
-	for (src = 0; src < 4; src++) {
-		if (BIT(src) & pending) {
-			vector = offset + (src << 3);
-			virq = irq_linear_revmap(pp->irq_domain, vector);
-			dev_dbg(dev, "irq: bit %d, vector %d, virq %d\n",
-				src, vector, virq);
-			generic_handle_irq(virq);
-		}
-	}
-}
-
 static void ks_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
 {
 	u32 reg_offset, bit_pos;
@@ -164,7 +132,9 @@ static void ks_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
 
 	pci = to_dw_pcie_from_pp(pp);
 	ks_pcie = to_keystone_pcie(pci);
-	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
+
+	reg_offset = irq % 8;
+	bit_pos = irq >> 3;
 
 	ks_pcie_app_writel(ks_pcie, MSI_IRQ_STATUS(reg_offset),
 			   BIT(bit_pos));
@@ -177,7 +147,9 @@ static void ks_pcie_msi_set_irq(struct pcie_port *pp, int irq)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
 
-	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
+	reg_offset = irq % 8;
+	bit_pos = irq >> 3;
+
 	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_SET(reg_offset),
 			   BIT(bit_pos));
 }
@@ -188,7 +160,9 @@ static void ks_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
 
-	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
+	reg_offset = irq % 8;
+	bit_pos = irq >> 3;
+
 	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_CLR(reg_offset),
 			   BIT(bit_pos));
 }
@@ -556,8 +530,10 @@ static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
 	struct keystone_pcie *ks_pcie = irq_desc_get_handler_data(desc);
 	u32 offset = irq - ks_pcie->msi_host_irq;
 	struct dw_pcie *pci = ks_pcie->pci;
+	struct pcie_port *pp = &pci->pp;
 	struct device *dev = pci->dev;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
+	u32 vector, virq, reg, pos;
 
 	dev_dbg(dev, "%s, irq %d\n", __func__, irq);
 
@@ -567,7 +543,23 @@ static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
 	 * ack operation.
 	 */
 	chained_irq_enter(chip, desc);
-	ks_pcie_handle_msi_irq(ks_pcie, offset);
+
+	reg = ks_pcie_app_readl(ks_pcie, MSI_IRQ_STATUS(offset));
+	/*
+	 * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit
+	 * shows 1, 9, 17, 25 and so forth
+	 */
+	for (pos = 0; pos < 4; pos++) {
+		if (!(reg & BIT(pos)))
+			continue;
+
+		vector = offset + (pos << 3);
+		virq = irq_linear_revmap(pp->irq_domain, vector);
+		dev_dbg(dev, "irq: bit %d, vector %d, virq %d\n", pos, vector,
+			virq);
+		generic_handle_irq(virq);
+	}
+
 	chained_irq_exit(chip, desc);
 }
 
-- 
2.17.1

[PATCH v5 4/8] PCI: keystone: Cleanup ks_pcie_msi_irq_handler

[Kishon Vijay Abraham I]

ks_pcie_msi_irq_handler() invokes ks_pcie_handle_msi_irq() for handling
the interrupts.

Having two functions for handling the interrupt was used when keystone
PCIe driver was implemented using two files. But with
commit b492aca35c982011500377797d2 ("PCI: keystone: Merge
pci-keystone-dw.c and pci-keystone.c"), which merged the keystone PCIe
driver to use a single file, two functions for handling the
interrupt handler is not required.

Handle MSI interrupt in a single interrupt handler here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 64 ++++++++++-------------
 1 file changed, 28 insertions(+), 36 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index fce25a0dcd08..39542f2c312b 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -105,13 +105,6 @@ struct keystone_pcie {
 	struct resource		app;
 };
 
-static inline void update_reg_offset_bit_pos(u32 offset, u32 *reg_offset,
-					     u32 *bit_pos)
-{
-	*reg_offset = offset % 8;
-	*bit_pos = offset >> 3;
-}
-
 static phys_addr_t ks_pcie_get_msi_addr(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -131,31 +124,6 @@ static void ks_pcie_app_writel(struct keystone_pcie *ks_pcie, u32 offset,
 	writel(val, ks_pcie->va_app_base + offset);
 }
 
-static void ks_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset)
-{
-	struct dw_pcie *pci = ks_pcie->pci;
-	struct pcie_port *pp = &pci->pp;
-	struct device *dev = pci->dev;
-	u32 pending, vector;
-	int src, virq;
-
-	pending = ks_pcie_app_readl(ks_pcie, MSI_IRQ_STATUS(offset));
-
-	/*
-	 * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit
-	 * shows 1, 9, 17, 25 and so forth
-	 */
-	for (src = 0; src < 4; src++) {
-		if (BIT(src) & pending) {
-			vector = offset + (src << 3);
-			virq = irq_linear_revmap(pp->irq_domain, vector);
-			dev_dbg(dev, "irq: bit %d, vector %d, virq %d\n",
-				src, vector, virq);
-			generic_handle_irq(virq);
-		}
-	}
-}
-
 static void ks_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
 {
 	u32 reg_offset, bit_pos;
@@ -164,7 +132,9 @@ static void ks_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
 
 	pci = to_dw_pcie_from_pp(pp);
 	ks_pcie = to_keystone_pcie(pci);
-	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
+
+	reg_offset = irq % 8;
+	bit_pos = irq >> 3;
 
 	ks_pcie_app_writel(ks_pcie, MSI_IRQ_STATUS(reg_offset),
 			   BIT(bit_pos));
@@ -177,7 +147,9 @@ static void ks_pcie_msi_set_irq(struct pcie_port *pp, int irq)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
 
-	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
+	reg_offset = irq % 8;
+	bit_pos = irq >> 3;
+
 	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_SET(reg_offset),
 			   BIT(bit_pos));
 }
@@ -188,7 +160,9 @@ static void ks_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
 
-	update_reg_offset_bit_pos(irq, &reg_offset, &bit_pos);
+	reg_offset = irq % 8;
+	bit_pos = irq >> 3;
+
 	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_CLR(reg_offset),
 			   BIT(bit_pos));
 }
@@ -556,8 +530,10 @@ static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
 	struct keystone_pcie *ks_pcie = irq_desc_get_handler_data(desc);
 	u32 offset = irq - ks_pcie->msi_host_irq;
 	struct dw_pcie *pci = ks_pcie->pci;
+	struct pcie_port *pp = &pci->pp;
 	struct device *dev = pci->dev;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
+	u32 vector, virq, reg, pos;
 
 	dev_dbg(dev, "%s, irq %d\n", __func__, irq);
 
@@ -567,7 +543,23 @@ static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
 	 * ack operation.
 	 */
 	chained_irq_enter(chip, desc);
-	ks_pcie_handle_msi_irq(ks_pcie, offset);
+
+	reg = ks_pcie_app_readl(ks_pcie, MSI_IRQ_STATUS(offset));
+	/*
+	 * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit
+	 * shows 1, 9, 17, 25 and so forth
+	 */
+	for (pos = 0; pos < 4; pos++) {
+		if (!(reg & BIT(pos)))
+			continue;
+
+		vector = offset + (pos << 3);
+		virq = irq_linear_revmap(pp->irq_domain, vector);
+		dev_dbg(dev, "irq: bit %d, vector %d, virq %d\n", pos, vector,
+			virq);
+		generic_handle_irq(virq);
+	}
+
 	chained_irq_exit(chip, desc);
 }
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 5/8] PCI: dwc: Add support to use non default msi_irq_chip

[Kishon Vijay Abraham I]

Platforms using DesignWare IP use dw_pci_msi_bottom_irq_chip for
configuring the MSI controller logic within the DesignWare IP. However
certain platforms like Keystone (K2G) which uses DesignWare IP have
their own MSI controller logic. For handling such platforms,
the irqchip ops use msi_irq_ack(), msi_set_irq(), msi_clear_irq()
callback functions.

Add support to use different msi_irq_chip with default as
dw_pci_msi_bottom_irq_chip. This is in preparation to get rid of
msi_irq_ack(), msi_set_irq(), msi_clear_irq() and other Keystone
specific dw_pcie_host_ops.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 5 ++++-
 drivers/pci/controller/dwc/pcie-designware.h      | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 25087d3c9a82..e28cb082f50d 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -245,7 +245,7 @@ static int dw_pcie_irq_domain_alloc(struct irq_domain *domain,
 
 	for (i = 0; i < nr_irqs; i++)
 		irq_domain_set_info(domain, virq + i, bit + i,
-				    &dw_pci_msi_bottom_irq_chip,
+				    pp->msi_irq_chip,
 				    pp, handle_edge_irq,
 				    NULL, NULL);
 
@@ -277,6 +277,9 @@ int dw_pcie_allocate_domains(struct pcie_port *pp)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct fwnode_handle *fwnode = of_node_to_fwnode(pci->dev->of_node);
 
+	if (!pp->msi_irq_chip)
+		pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
+
 	pp->irq_domain = irq_domain_create_linear(fwnode, pp->num_vectors,
 					       &dw_pcie_msi_domain_ops, pp);
 	if (!pp->irq_domain) {
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 377f4c0b52da..6b0cea473ee7 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -179,6 +179,7 @@ struct pcie_port {
 	struct irq_domain	*irq_domain;
 	struct irq_domain	*msi_domain;
 	dma_addr_t		msi_data;
+	struct irq_chip		*msi_irq_chip;
 	u32			num_vectors;
 	u32			irq_mask[MAX_MSI_CTRLS];
 	raw_spinlock_t		lock;
-- 
2.17.1

[PATCH v5 5/8] PCI: dwc: Add support to use non default msi_irq_chip

[Kishon Vijay Abraham I]

Platforms using DesignWare IP use dw_pci_msi_bottom_irq_chip for
configuring the MSI controller logic within the DesignWare IP. However
certain platforms like Keystone (K2G) which uses DesignWare IP have
their own MSI controller logic. For handling such platforms,
the irqchip ops use msi_irq_ack(), msi_set_irq(), msi_clear_irq()
callback functions.

Add support to use different msi_irq_chip with default as
dw_pci_msi_bottom_irq_chip. This is in preparation to get rid of
msi_irq_ack(), msi_set_irq(), msi_clear_irq() and other Keystone
specific dw_pcie_host_ops.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 5 ++++-
 drivers/pci/controller/dwc/pcie-designware.h      | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 25087d3c9a82..e28cb082f50d 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -245,7 +245,7 @@ static int dw_pcie_irq_domain_alloc(struct irq_domain *domain,
 
 	for (i = 0; i < nr_irqs; i++)
 		irq_domain_set_info(domain, virq + i, bit + i,
-				    &dw_pci_msi_bottom_irq_chip,
+				    pp->msi_irq_chip,
 				    pp, handle_edge_irq,
 				    NULL, NULL);
 
@@ -277,6 +277,9 @@ int dw_pcie_allocate_domains(struct pcie_port *pp)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct fwnode_handle *fwnode = of_node_to_fwnode(pci->dev->of_node);
 
+	if (!pp->msi_irq_chip)
+		pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
+
 	pp->irq_domain = irq_domain_create_linear(fwnode, pp->num_vectors,
 					       &dw_pcie_msi_domain_ops, pp);
 	if (!pp->irq_domain) {
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 377f4c0b52da..6b0cea473ee7 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -179,6 +179,7 @@ struct pcie_port {
 	struct irq_domain	*irq_domain;
 	struct irq_domain	*msi_domain;
 	dma_addr_t		msi_data;
+	struct irq_chip		*msi_irq_chip;
 	u32			num_vectors;
 	u32			irq_mask[MAX_MSI_CTRLS];
 	raw_spinlock_t		lock;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 6/8] PCI: keystone: Use Keystone specific msi_irq_chip

[Kishon Vijay Abraham I]

Use Keystone specific msi_irq_chip to configure the MSI controller
logic in the PCIe keystone wrapper instead of using the default
Designware msi_irq chip (dw_pci_msi_bottom_irq_chip) with
callback functions for configuring the Keystone MSI controller.
This will help to remove Keystone specific callback functions
added in dw_pcie_host_ops.

Move the default msi_irq_chip assignment to dw_pcie_host_init since
platforms that doesn't use the default msi_irq_chip will assign
msi_irq_chip in msi_host_init() callback.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c     | 96 ++++++++++++++-----
 .../pci/controller/dwc/pcie-designware-host.c |  5 +-
 2 files changed, 74 insertions(+), 27 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 39542f2c312b..b757692e2848 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -105,14 +105,6 @@ struct keystone_pcie {
 	struct resource		app;
 };
 
-static phys_addr_t ks_pcie_get_msi_addr(struct pcie_port *pp)
-{
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
-
-	return ks_pcie->app.start + MSI_IRQ;
-}
-
 static u32 ks_pcie_app_readl(struct keystone_pcie *ks_pcie, u32 offset)
 {
 	return readl(ks_pcie->va_app_base + offset);
@@ -124,11 +116,14 @@ static void ks_pcie_app_writel(struct keystone_pcie *ks_pcie, u32 offset,
 	writel(val, ks_pcie->va_app_base + offset);
 }
 
-static void ks_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
+static void ks_pcie_msi_irq_ack(struct irq_data *data)
 {
-	u32 reg_offset, bit_pos;
+	struct pcie_port *pp  = irq_data_get_irq_chip_data(data);
 	struct keystone_pcie *ks_pcie;
+	u32 irq = data->hwirq;
 	struct dw_pcie *pci;
+	u32 reg_offset;
+	u32 bit_pos;
 
 	pci = to_dw_pcie_from_pp(pp);
 	ks_pcie = to_keystone_pcie(pci);
@@ -141,34 +136,91 @@ static void ks_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
 	ks_pcie_app_writel(ks_pcie, IRQ_EOI, reg_offset + MSI_IRQ_OFFSET);
 }
 
-static void ks_pcie_msi_set_irq(struct pcie_port *pp, int irq)
+static void ks_pcie_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 {
-	u32 reg_offset, bit_pos;
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+	struct pcie_port *pp = irq_data_get_irq_chip_data(data);
+	struct keystone_pcie *ks_pcie;
+	struct dw_pcie *pci;
+	u64 msi_target;
+
+	pci = to_dw_pcie_from_pp(pp);
+	ks_pcie = to_keystone_pcie(pci);
+
+	msi_target = ks_pcie->app.start + MSI_IRQ;
+	msg->address_lo = lower_32_bits(msi_target);
+	msg->address_hi = upper_32_bits(msi_target);
+	msg->data = data->hwirq;
+
+	dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
+		(int)data->hwirq, msg->address_hi, msg->address_lo);
+}
+
+static int ks_pcie_msi_set_affinity(struct irq_data *irq_data,
+				    const struct cpumask *mask, bool force)
+{
+	return -EINVAL;
+}
+
+static void ks_pcie_msi_mask(struct irq_data *data)
+{
+	struct pcie_port *pp = irq_data_get_irq_chip_data(data);
+	struct keystone_pcie *ks_pcie;
+	u32 irq = data->hwirq;
+	struct dw_pcie *pci;
+	unsigned long flags;
+	u32 reg_offset;
+	u32 bit_pos;
+
+	raw_spin_lock_irqsave(&pp->lock, flags);
+
+	pci = to_dw_pcie_from_pp(pp);
+	ks_pcie = to_keystone_pcie(pci);
 
 	reg_offset = irq % 8;
 	bit_pos = irq >> 3;
 
-	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_SET(reg_offset),
+	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_CLR(reg_offset),
 			   BIT(bit_pos));
+
+	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
 
-static void ks_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
+static void ks_pcie_msi_unmask(struct irq_data *data)
 {
-	u32 reg_offset, bit_pos;
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+	struct pcie_port *pp = irq_data_get_irq_chip_data(data);
+	struct keystone_pcie *ks_pcie;
+	u32 irq = data->hwirq;
+	struct dw_pcie *pci;
+	unsigned long flags;
+	u32 reg_offset;
+	u32 bit_pos;
+
+	raw_spin_lock_irqsave(&pp->lock, flags);
+
+	pci = to_dw_pcie_from_pp(pp);
+	ks_pcie = to_keystone_pcie(pci);
 
 	reg_offset = irq % 8;
 	bit_pos = irq >> 3;
 
-	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_CLR(reg_offset),
+	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_SET(reg_offset),
 			   BIT(bit_pos));
+
+	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
 
+static struct irq_chip ks_pcie_msi_irq_chip = {
+	.name = "KEYSTONE-PCI-MSI",
+	.irq_ack = ks_pcie_msi_irq_ack,
+	.irq_compose_msi_msg = ks_pcie_compose_msi_msg,
+	.irq_set_affinity = ks_pcie_msi_set_affinity,
+	.irq_mask = ks_pcie_msi_mask,
+	.irq_unmask = ks_pcie_msi_unmask,
+};
+
 static int ks_pcie_msi_host_init(struct pcie_port *pp)
 {
+	pp->msi_irq_chip = &ks_pcie_msi_irq_chip;
 	return dw_pcie_allocate_domains(pp);
 }
 
@@ -785,11 +837,7 @@ static const struct dw_pcie_host_ops ks_pcie_host_ops = {
 	.rd_other_conf = ks_pcie_rd_other_conf,
 	.wr_other_conf = ks_pcie_wr_other_conf,
 	.host_init = ks_pcie_host_init,
-	.msi_set_irq = ks_pcie_msi_set_irq,
-	.msi_clear_irq = ks_pcie_msi_clear_irq,
-	.get_msi_addr = ks_pcie_get_msi_addr,
 	.msi_host_init = ks_pcie_msi_host_init,
-	.msi_irq_ack = ks_pcie_msi_irq_ack,
 	.scan_bus = ks_pcie_v3_65_scan_bus,
 };
 
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index e28cb082f50d..9e47bad82bbc 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -277,9 +277,6 @@ int dw_pcie_allocate_domains(struct pcie_port *pp)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct fwnode_handle *fwnode = of_node_to_fwnode(pci->dev->of_node);
 
-	if (!pp->msi_irq_chip)
-		pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
-
 	pp->irq_domain = irq_domain_create_linear(fwnode, pp->num_vectors,
 					       &dw_pcie_msi_domain_ops, pp);
 	if (!pp->irq_domain) {
@@ -462,6 +459,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
 		}
 
 		if (!pp->ops->msi_host_init) {
+			pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
+
 			ret = dw_pcie_allocate_domains(pp);
 			if (ret)
 				goto error;
-- 
2.17.1

[PATCH v5 6/8] PCI: keystone: Use Keystone specific msi_irq_chip

[Kishon Vijay Abraham I]

Use Keystone specific msi_irq_chip to configure the MSI controller
logic in the PCIe keystone wrapper instead of using the default
Designware msi_irq chip (dw_pci_msi_bottom_irq_chip) with
callback functions for configuring the Keystone MSI controller.
This will help to remove Keystone specific callback functions
added in dw_pcie_host_ops.

Move the default msi_irq_chip assignment to dw_pcie_host_init since
platforms that doesn't use the default msi_irq_chip will assign
msi_irq_chip in msi_host_init() callback.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c     | 96 ++++++++++++++-----
 .../pci/controller/dwc/pcie-designware-host.c |  5 +-
 2 files changed, 74 insertions(+), 27 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 39542f2c312b..b757692e2848 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -105,14 +105,6 @@ struct keystone_pcie {
 	struct resource		app;
 };
 
-static phys_addr_t ks_pcie_get_msi_addr(struct pcie_port *pp)
-{
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
-
-	return ks_pcie->app.start + MSI_IRQ;
-}
-
 static u32 ks_pcie_app_readl(struct keystone_pcie *ks_pcie, u32 offset)
 {
 	return readl(ks_pcie->va_app_base + offset);
@@ -124,11 +116,14 @@ static void ks_pcie_app_writel(struct keystone_pcie *ks_pcie, u32 offset,
 	writel(val, ks_pcie->va_app_base + offset);
 }
 
-static void ks_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
+static void ks_pcie_msi_irq_ack(struct irq_data *data)
 {
-	u32 reg_offset, bit_pos;
+	struct pcie_port *pp  = irq_data_get_irq_chip_data(data);
 	struct keystone_pcie *ks_pcie;
+	u32 irq = data->hwirq;
 	struct dw_pcie *pci;
+	u32 reg_offset;
+	u32 bit_pos;
 
 	pci = to_dw_pcie_from_pp(pp);
 	ks_pcie = to_keystone_pcie(pci);
@@ -141,34 +136,91 @@ static void ks_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
 	ks_pcie_app_writel(ks_pcie, IRQ_EOI, reg_offset + MSI_IRQ_OFFSET);
 }
 
-static void ks_pcie_msi_set_irq(struct pcie_port *pp, int irq)
+static void ks_pcie_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 {
-	u32 reg_offset, bit_pos;
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+	struct pcie_port *pp = irq_data_get_irq_chip_data(data);
+	struct keystone_pcie *ks_pcie;
+	struct dw_pcie *pci;
+	u64 msi_target;
+
+	pci = to_dw_pcie_from_pp(pp);
+	ks_pcie = to_keystone_pcie(pci);
+
+	msi_target = ks_pcie->app.start + MSI_IRQ;
+	msg->address_lo = lower_32_bits(msi_target);
+	msg->address_hi = upper_32_bits(msi_target);
+	msg->data = data->hwirq;
+
+	dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
+		(int)data->hwirq, msg->address_hi, msg->address_lo);
+}
+
+static int ks_pcie_msi_set_affinity(struct irq_data *irq_data,
+				    const struct cpumask *mask, bool force)
+{
+	return -EINVAL;
+}
+
+static void ks_pcie_msi_mask(struct irq_data *data)
+{
+	struct pcie_port *pp = irq_data_get_irq_chip_data(data);
+	struct keystone_pcie *ks_pcie;
+	u32 irq = data->hwirq;
+	struct dw_pcie *pci;
+	unsigned long flags;
+	u32 reg_offset;
+	u32 bit_pos;
+
+	raw_spin_lock_irqsave(&pp->lock, flags);
+
+	pci = to_dw_pcie_from_pp(pp);
+	ks_pcie = to_keystone_pcie(pci);
 
 	reg_offset = irq % 8;
 	bit_pos = irq >> 3;
 
-	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_SET(reg_offset),
+	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_CLR(reg_offset),
 			   BIT(bit_pos));
+
+	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
 
-static void ks_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
+static void ks_pcie_msi_unmask(struct irq_data *data)
 {
-	u32 reg_offset, bit_pos;
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+	struct pcie_port *pp = irq_data_get_irq_chip_data(data);
+	struct keystone_pcie *ks_pcie;
+	u32 irq = data->hwirq;
+	struct dw_pcie *pci;
+	unsigned long flags;
+	u32 reg_offset;
+	u32 bit_pos;
+
+	raw_spin_lock_irqsave(&pp->lock, flags);
+
+	pci = to_dw_pcie_from_pp(pp);
+	ks_pcie = to_keystone_pcie(pci);
 
 	reg_offset = irq % 8;
 	bit_pos = irq >> 3;
 
-	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_CLR(reg_offset),
+	ks_pcie_app_writel(ks_pcie, MSI_IRQ_ENABLE_SET(reg_offset),
 			   BIT(bit_pos));
+
+	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
 
+static struct irq_chip ks_pcie_msi_irq_chip = {
+	.name = "KEYSTONE-PCI-MSI",
+	.irq_ack = ks_pcie_msi_irq_ack,
+	.irq_compose_msi_msg = ks_pcie_compose_msi_msg,
+	.irq_set_affinity = ks_pcie_msi_set_affinity,
+	.irq_mask = ks_pcie_msi_mask,
+	.irq_unmask = ks_pcie_msi_unmask,
+};
+
 static int ks_pcie_msi_host_init(struct pcie_port *pp)
 {
+	pp->msi_irq_chip = &ks_pcie_msi_irq_chip;
 	return dw_pcie_allocate_domains(pp);
 }
 
@@ -785,11 +837,7 @@ static const struct dw_pcie_host_ops ks_pcie_host_ops = {
 	.rd_other_conf = ks_pcie_rd_other_conf,
 	.wr_other_conf = ks_pcie_wr_other_conf,
 	.host_init = ks_pcie_host_init,
-	.msi_set_irq = ks_pcie_msi_set_irq,
-	.msi_clear_irq = ks_pcie_msi_clear_irq,
-	.get_msi_addr = ks_pcie_get_msi_addr,
 	.msi_host_init = ks_pcie_msi_host_init,
-	.msi_irq_ack = ks_pcie_msi_irq_ack,
 	.scan_bus = ks_pcie_v3_65_scan_bus,
 };
 
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index e28cb082f50d..9e47bad82bbc 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -277,9 +277,6 @@ int dw_pcie_allocate_domains(struct pcie_port *pp)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct fwnode_handle *fwnode = of_node_to_fwnode(pci->dev->of_node);
 
-	if (!pp->msi_irq_chip)
-		pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
-
 	pp->irq_domain = irq_domain_create_linear(fwnode, pp->num_vectors,
 					       &dw_pcie_msi_domain_ops, pp);
 	if (!pp->irq_domain) {
@@ -462,6 +459,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
 		}
 
 		if (!pp->ops->msi_host_init) {
+			pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
+
 			ret = dw_pcie_allocate_domains(pp);
 			if (ret)
 				goto error;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 7/8] PCI: dwc: Remove Keystone specific dw_pcie_host_ops

[Kishon Vijay Abraham I]

Now that Keystone started using its own msi_irq_chip, remove
Keystone specific callback functions defined in dw_pcie_host_ops.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/dwc/pcie-designware-host.c | 50 ++++++-------------
 drivers/pci/controller/dwc/pcie-designware.h  |  5 --
 2 files changed, 14 insertions(+), 41 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 9e47bad82bbc..498422397609 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -126,18 +126,12 @@ static void dw_pci_setup_msi_msg(struct irq_data *d, struct msi_msg *msg)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	u64 msi_target;
 
-	if (pp->ops->get_msi_addr)
-		msi_target = pp->ops->get_msi_addr(pp);
-	else
-		msi_target = (u64)pp->msi_data;
+	msi_target = (u64)pp->msi_data;
 
 	msg->address_lo = lower_32_bits(msi_target);
 	msg->address_hi = upper_32_bits(msi_target);
 
-	if (pp->ops->get_msi_data)
-		msg->data = pp->ops->get_msi_data(pp, d->hwirq);
-	else
-		msg->data = d->hwirq;
+	msg->data = d->hwirq;
 
 	dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
 		(int)d->hwirq, msg->address_hi, msg->address_lo);
@@ -157,17 +151,13 @@ static void dw_pci_bottom_mask(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&pp->lock, flags);
 
-	if (pp->ops->msi_clear_irq) {
-		pp->ops->msi_clear_irq(pp, d->hwirq);
-	} else {
-		ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
-		res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
-		bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
+	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-		pp->irq_mask[ctrl] |= BIT(bit);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
-				    pp->irq_mask[ctrl]);
-	}
+	pp->irq_mask[ctrl] |= BIT(bit);
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+			    pp->irq_mask[ctrl]);
 
 	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
@@ -180,17 +170,13 @@ static void dw_pci_bottom_unmask(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&pp->lock, flags);
 
-	if (pp->ops->msi_set_irq) {
-		pp->ops->msi_set_irq(pp, d->hwirq);
-	} else {
-		ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
-		res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
-		bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
+	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-		pp->irq_mask[ctrl] &= ~BIT(bit);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
-				    pp->irq_mask[ctrl]);
-	}
+	pp->irq_mask[ctrl] &= ~BIT(bit);
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+			    pp->irq_mask[ctrl]);
 
 	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
@@ -199,20 +185,12 @@ static void dw_pci_bottom_ack(struct irq_data *d)
 {
 	struct pcie_port *pp  = irq_data_get_irq_chip_data(d);
 	unsigned int res, bit, ctrl;
-	unsigned long flags;
 
 	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
 	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
 	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-	raw_spin_lock_irqsave(&pp->lock, flags);
-
 	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + res, 4, BIT(bit));
-
-	if (pp->ops->msi_irq_ack)
-		pp->ops->msi_irq_ack(d->hwirq, pp);
-
-	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
 
 static struct irq_chip dw_pci_msi_bottom_irq_chip = {
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 6b0cea473ee7..ca3a3190a6f5 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -145,14 +145,9 @@ struct dw_pcie_host_ops {
 	int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
 			     unsigned int devfn, int where, int size, u32 val);
 	int (*host_init)(struct pcie_port *pp);
-	void (*msi_set_irq)(struct pcie_port *pp, int irq);
-	void (*msi_clear_irq)(struct pcie_port *pp, int irq);
-	phys_addr_t (*get_msi_addr)(struct pcie_port *pp);
-	u32 (*get_msi_data)(struct pcie_port *pp, int pos);
 	void (*scan_bus)(struct pcie_port *pp);
 	void (*set_num_vectors)(struct pcie_port *pp);
 	int (*msi_host_init)(struct pcie_port *pp);
-	void (*msi_irq_ack)(int irq, struct pcie_port *pp);
 };
 
 struct pcie_port {
-- 
2.17.1

[PATCH v5 7/8] PCI: dwc: Remove Keystone specific dw_pcie_host_ops

[Kishon Vijay Abraham I]

Now that Keystone started using its own msi_irq_chip, remove
Keystone specific callback functions defined in dw_pcie_host_ops.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/dwc/pcie-designware-host.c | 50 ++++++-------------
 drivers/pci/controller/dwc/pcie-designware.h  |  5 --
 2 files changed, 14 insertions(+), 41 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 9e47bad82bbc..498422397609 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -126,18 +126,12 @@ static void dw_pci_setup_msi_msg(struct irq_data *d, struct msi_msg *msg)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	u64 msi_target;
 
-	if (pp->ops->get_msi_addr)
-		msi_target = pp->ops->get_msi_addr(pp);
-	else
-		msi_target = (u64)pp->msi_data;
+	msi_target = (u64)pp->msi_data;
 
 	msg->address_lo = lower_32_bits(msi_target);
 	msg->address_hi = upper_32_bits(msi_target);
 
-	if (pp->ops->get_msi_data)
-		msg->data = pp->ops->get_msi_data(pp, d->hwirq);
-	else
-		msg->data = d->hwirq;
+	msg->data = d->hwirq;
 
 	dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
 		(int)d->hwirq, msg->address_hi, msg->address_lo);
@@ -157,17 +151,13 @@ static void dw_pci_bottom_mask(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&pp->lock, flags);
 
-	if (pp->ops->msi_clear_irq) {
-		pp->ops->msi_clear_irq(pp, d->hwirq);
-	} else {
-		ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
-		res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
-		bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
+	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-		pp->irq_mask[ctrl] |= BIT(bit);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
-				    pp->irq_mask[ctrl]);
-	}
+	pp->irq_mask[ctrl] |= BIT(bit);
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+			    pp->irq_mask[ctrl]);
 
 	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
@@ -180,17 +170,13 @@ static void dw_pci_bottom_unmask(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&pp->lock, flags);
 
-	if (pp->ops->msi_set_irq) {
-		pp->ops->msi_set_irq(pp, d->hwirq);
-	} else {
-		ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
-		res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
-		bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
+	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-		pp->irq_mask[ctrl] &= ~BIT(bit);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
-				    pp->irq_mask[ctrl]);
-	}
+	pp->irq_mask[ctrl] &= ~BIT(bit);
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+			    pp->irq_mask[ctrl]);
 
 	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
@@ -199,20 +185,12 @@ static void dw_pci_bottom_ack(struct irq_data *d)
 {
 	struct pcie_port *pp  = irq_data_get_irq_chip_data(d);
 	unsigned int res, bit, ctrl;
-	unsigned long flags;
 
 	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
 	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
 	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-	raw_spin_lock_irqsave(&pp->lock, flags);
-
 	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + res, 4, BIT(bit));
-
-	if (pp->ops->msi_irq_ack)
-		pp->ops->msi_irq_ack(d->hwirq, pp);
-
-	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
 
 static struct irq_chip dw_pci_msi_bottom_irq_chip = {
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 6b0cea473ee7..ca3a3190a6f5 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -145,14 +145,9 @@ struct dw_pcie_host_ops {
 	int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
 			     unsigned int devfn, int where, int size, u32 val);
 	int (*host_init)(struct pcie_port *pp);
-	void (*msi_set_irq)(struct pcie_port *pp, int irq);
-	void (*msi_clear_irq)(struct pcie_port *pp, int irq);
-	phys_addr_t (*get_msi_addr)(struct pcie_port *pp);
-	u32 (*get_msi_data)(struct pcie_port *pp, int pos);
 	void (*scan_bus)(struct pcie_port *pp);
 	void (*set_num_vectors)(struct pcie_port *pp);
 	int (*msi_host_init)(struct pcie_port *pp);
-	void (*msi_irq_ack)(int irq, struct pcie_port *pp);
 };
 
 struct pcie_port {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 8/8] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it

[Kishon Vijay Abraham I]

Platforms which populate msi_host_init, has it's own MSI controller
logic. Writing to MSI control registers on platforms which doesn't use
Designware's MSI controller logic might have side effects. To
be safe, do not write to MSI control registers if the platform uses
it's own MSI controller logic instead of Designware's MSI controller
logic.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/dwc/pcie-designware-host.c | 24 ++++++++++---------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 498422397609..7e0ff7d428a9 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -626,17 +626,19 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 
 	dw_pcie_setup(pci);
 
-	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
-
-	/* Initialize IRQ Status array */
-	for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
-		pp->irq_mask[ctrl] = ~0;
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
-					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
-				    4, pp->irq_mask[ctrl]);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
-					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
-				    4, ~0);
+	if (!pp->ops->msi_host_init) {
+		num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
+
+		/* Initialize IRQ Status array */
+		for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
+			pp->irq_mask[ctrl] = ~0;
+			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
+					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
+					    4, pp->irq_mask[ctrl]);
+			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
+					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
+					    4, ~0);
+		}
 	}
 
 	/* Setup RC BARs */
-- 
2.17.1

[PATCH v5 8/8] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it

[Kishon Vijay Abraham I]

Platforms which populate msi_host_init, has it's own MSI controller
logic. Writing to MSI control registers on platforms which doesn't use
Designware's MSI controller logic might have side effects. To
be safe, do not write to MSI control registers if the platform uses
it's own MSI controller logic instead of Designware's MSI controller
logic.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/dwc/pcie-designware-host.c | 24 ++++++++++---------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 498422397609..7e0ff7d428a9 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -626,17 +626,19 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 
 	dw_pcie_setup(pci);
 
-	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
-
-	/* Initialize IRQ Status array */
-	for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
-		pp->irq_mask[ctrl] = ~0;
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
-					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
-				    4, pp->irq_mask[ctrl]);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
-					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
-				    4, ~0);
+	if (!pp->ops->msi_host_init) {
+		num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
+
+		/* Initialize IRQ Status array */
+		for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
+			pp->irq_mask[ctrl] = ~0;
+			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
+					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
+					    4, pp->irq_mask[ctrl]);
+			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
+					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
+					    4, ~0);
+		}
 	}
 
 	/* Setup RC BARs */
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 0/8] PCI: DWC/Keystone: MSI configuration cleanup

[Lorenzo Pieralisi]

On Thu, Mar 21, 2019 at 03:29:19PM +0530, Kishon Vijay Abraham I wrote:
> This series tries to address the comments discussed in [1] w.r.t
> removing Keystone specific callbacks defined in dw_pcie_host_ops.
> 
> This series also tries to cleanup the Keystone interrupt handling
> part.
> 
> Changes from v4:
> *) Removed legacy interrupt cleanup patch which uses hierarchy IRQ
>    domain since TI platform uses edge interrupt for legacy interrupt.
>    This will be deferred till I get more details from HW team.
> 
> Changes from v3:
> *) Uses hierarchy IRQ domain for legacy interrupts since there is 1:1
>    mapping between legacy interrupt and GIC IRQ.
>    (MSI still depends on the order of IRQs populated in dt).
> 
> Changes from v2:
> *) Removed patch that modifies ks_pcie_legacy_irq_handler() to check the
>    IRQ_STATUS of INTA/B/C/D. Lorenzo's comment to create a matrix
>    LinuxIRQ x INTx will be added in AM654x PCIe support series
> *) ks_pcie_legacy_irq_handler() is made to use hwirq to get IRQ offset
>    instead of virq.
> *) default msi_irq_chip is assigned in dw_pcie_host_init() once keystone
>    assigns its msi_irq_chip
> *) Fixed other minor comments from Lorenzo and Bjorn
> 
> Changes from v1:
> *) Removed "PCI: keystone: Use "dummy_irq_chip" instead of new irqchip
> for legacy interrupt handling" from the patch series. It should be
> handled differently.
> 
> *) Added Gustavo's ACKed by and fixed a commit message.
> 
> [1] -> https://patchwork.kernel.org/patch/10681587/
> 
> Kishon Vijay Abraham I (8):
>   PCI: keystone: Cleanup interrupt related macros
>   PCI: keystone: Add separate functions for configuring MSI and legacy
>     interrupt
>   PCI: keystone: Use hwirq to get the MSI IRQ number offset
>   PCI: keystone: Cleanup ks_pcie_msi_irq_handler
>   PCI: dwc: Add support to use non default msi_irq_chip
>   PCI: keystone: Use Keystone specific msi_irq_chip
>   PCI: dwc: Remove Keystone specific dw_pcie_host_ops
>   PCI: dwc: Do not write to MSI control registers if the platform
>     doesn't use it
> 
>  drivers/pci/controller/dwc/pci-keystone.c     | 365 ++++++++++--------
>  .../pci/controller/dwc/pcie-designware-host.c |  78 ++--
>  drivers/pci/controller/dwc/pcie-designware.h  |   6 +-
>  3 files changed, 233 insertions(+), 216 deletions(-)

I would need Gustavo's ACKs on dwc patches, I will queue the
series then.

Lorenzo

Re: [PATCH v5 0/8] PCI: DWC/Keystone: MSI configuration cleanup

[Lorenzo Pieralisi]

On Thu, Mar 21, 2019 at 03:29:19PM +0530, Kishon Vijay Abraham I wrote:
> This series tries to address the comments discussed in [1] w.r.t
> removing Keystone specific callbacks defined in dw_pcie_host_ops.
> 
> This series also tries to cleanup the Keystone interrupt handling
> part.
> 
> Changes from v4:
> *) Removed legacy interrupt cleanup patch which uses hierarchy IRQ
>    domain since TI platform uses edge interrupt for legacy interrupt.
>    This will be deferred till I get more details from HW team.
> 
> Changes from v3:
> *) Uses hierarchy IRQ domain for legacy interrupts since there is 1:1
>    mapping between legacy interrupt and GIC IRQ.
>    (MSI still depends on the order of IRQs populated in dt).
> 
> Changes from v2:
> *) Removed patch that modifies ks_pcie_legacy_irq_handler() to check the
>    IRQ_STATUS of INTA/B/C/D. Lorenzo's comment to create a matrix
>    LinuxIRQ x INTx will be added in AM654x PCIe support series
> *) ks_pcie_legacy_irq_handler() is made to use hwirq to get IRQ offset
>    instead of virq.
> *) default msi_irq_chip is assigned in dw_pcie_host_init() once keystone
>    assigns its msi_irq_chip
> *) Fixed other minor comments from Lorenzo and Bjorn
> 
> Changes from v1:
> *) Removed "PCI: keystone: Use "dummy_irq_chip" instead of new irqchip
> for legacy interrupt handling" from the patch series. It should be
> handled differently.
> 
> *) Added Gustavo's ACKed by and fixed a commit message.
> 
> [1] -> https://patchwork.kernel.org/patch/10681587/
> 
> Kishon Vijay Abraham I (8):
>   PCI: keystone: Cleanup interrupt related macros
>   PCI: keystone: Add separate functions for configuring MSI and legacy
>     interrupt
>   PCI: keystone: Use hwirq to get the MSI IRQ number offset
>   PCI: keystone: Cleanup ks_pcie_msi_irq_handler
>   PCI: dwc: Add support to use non default msi_irq_chip
>   PCI: keystone: Use Keystone specific msi_irq_chip
>   PCI: dwc: Remove Keystone specific dw_pcie_host_ops
>   PCI: dwc: Do not write to MSI control registers if the platform
>     doesn't use it
> 
>  drivers/pci/controller/dwc/pci-keystone.c     | 365 ++++++++++--------
>  .../pci/controller/dwc/pcie-designware-host.c |  78 ++--
>  drivers/pci/controller/dwc/pcie-designware.h  |   6 +-
>  3 files changed, 233 insertions(+), 216 deletions(-)

I would need Gustavo's ACKs on dwc patches, I will queue the
series then.

Lorenzo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 8/8] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it

[Lorenzo Pieralisi]

On Thu, Mar 21, 2019 at 03:29:27PM +0530, Kishon Vijay Abraham I wrote:
> Platforms which populate msi_host_init, has it's own MSI controller
> logic. Writing to MSI control registers on platforms which doesn't use
> Designware's MSI controller logic might have side effects. To
> be safe, do not write to MSI control registers if the platform uses
> it's own MSI controller logic instead of Designware's MSI controller
> logic.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  .../pci/controller/dwc/pcie-designware-host.c | 24 ++++++++++---------
>  1 file changed, 13 insertions(+), 11 deletions(-)

This patch is needed regardless of the rest of the series, correct ?
A.k.a. it is fixing an issue already in the mainline.

Just to make sure we are not _introducing_ a bisection issue with this
series up to this patch, in which case I will squash this patch into one
of the previous ones, please let me know.

Thanks,
Lorenzo

> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 498422397609..7e0ff7d428a9 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -626,17 +626,19 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
>  
>  	dw_pcie_setup(pci);
>  
> -	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
> -
> -	/* Initialize IRQ Status array */
> -	for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
> -		pp->irq_mask[ctrl] = ~0;
> -		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
> -					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
> -				    4, pp->irq_mask[ctrl]);
> -		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
> -					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
> -				    4, ~0);
> +	if (!pp->ops->msi_host_init) {
> +		num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
> +
> +		/* Initialize IRQ Status array */
> +		for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
> +			pp->irq_mask[ctrl] = ~0;
> +			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
> +					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
> +					    4, pp->irq_mask[ctrl]);
> +			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
> +					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
> +					    4, ~0);
> +		}
>  	}
>  
>  	/* Setup RC BARs */
> -- 
> 2.17.1
> 

Re: [PATCH v5 8/8] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it

[Lorenzo Pieralisi]

On Thu, Mar 21, 2019 at 03:29:27PM +0530, Kishon Vijay Abraham I wrote:
> Platforms which populate msi_host_init, has it's own MSI controller
> logic. Writing to MSI control registers on platforms which doesn't use
> Designware's MSI controller logic might have side effects. To
> be safe, do not write to MSI control registers if the platform uses
> it's own MSI controller logic instead of Designware's MSI controller
> logic.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  .../pci/controller/dwc/pcie-designware-host.c | 24 ++++++++++---------
>  1 file changed, 13 insertions(+), 11 deletions(-)

This patch is needed regardless of the rest of the series, correct ?
A.k.a. it is fixing an issue already in the mainline.

Just to make sure we are not _introducing_ a bisection issue with this
series up to this patch, in which case I will squash this patch into one
of the previous ones, please let me know.

Thanks,
Lorenzo

> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 498422397609..7e0ff7d428a9 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -626,17 +626,19 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
>  
>  	dw_pcie_setup(pci);
>  
> -	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
> -
> -	/* Initialize IRQ Status array */
> -	for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
> -		pp->irq_mask[ctrl] = ~0;
> -		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
> -					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
> -				    4, pp->irq_mask[ctrl]);
> -		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
> -					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
> -				    4, ~0);
> +	if (!pp->ops->msi_host_init) {
> +		num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
> +
> +		/* Initialize IRQ Status array */
> +		for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
> +			pp->irq_mask[ctrl] = ~0;
> +			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
> +					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
> +					    4, pp->irq_mask[ctrl]);
> +			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
> +					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
> +					    4, ~0);
> +		}
>  	}
>  
>  	/* Setup RC BARs */
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 8/8] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it

[Kishon Vijay Abraham I]

Hi Lorenzo,

On 03/04/19 10:49 PM, Lorenzo Pieralisi wrote:
> On Thu, Mar 21, 2019 at 03:29:27PM +0530, Kishon Vijay Abraham I wrote:
>> Platforms which populate msi_host_init, has it's own MSI controller
>> logic. Writing to MSI control registers on platforms which doesn't use
>> Designware's MSI controller logic might have side effects. To
>> be safe, do not write to MSI control registers if the platform uses
>> it's own MSI controller logic instead of Designware's MSI controller
>> logic.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  .../pci/controller/dwc/pcie-designware-host.c | 24 ++++++++++---------
>>  1 file changed, 13 insertions(+), 11 deletions(-)
> 
> This patch is needed regardless of the rest of the series, correct ?
> A.k.a. it is fixing an issue already in the mainline.

That's correct.

Thanks
Kishon

Re: [PATCH v5 8/8] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it

[Kishon Vijay Abraham I]

Hi Lorenzo,

On 03/04/19 10:49 PM, Lorenzo Pieralisi wrote:
> On Thu, Mar 21, 2019 at 03:29:27PM +0530, Kishon Vijay Abraham I wrote:
>> Platforms which populate msi_host_init, has it's own MSI controller
>> logic. Writing to MSI control registers on platforms which doesn't use
>> Designware's MSI controller logic might have side effects. To
>> be safe, do not write to MSI control registers if the platform uses
>> it's own MSI controller logic instead of Designware's MSI controller
>> logic.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  .../pci/controller/dwc/pcie-designware-host.c | 24 ++++++++++---------
>>  1 file changed, 13 insertions(+), 11 deletions(-)
> 
> This patch is needed regardless of the rest of the series, correct ?
> A.k.a. it is fixing an issue already in the mainline.

That's correct.

Thanks
Kishon

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 0/8] PCI: DWC/Keystone: MSI configuration cleanup

[Lorenzo Pieralisi]

On Thu, Mar 21, 2019 at 03:29:19PM +0530, Kishon Vijay Abraham I wrote:
> This series tries to address the comments discussed in [1] w.r.t
> removing Keystone specific callbacks defined in dw_pcie_host_ops.
> 
> This series also tries to cleanup the Keystone interrupt handling
> part.
> 
> Changes from v4:
> *) Removed legacy interrupt cleanup patch which uses hierarchy IRQ
>    domain since TI platform uses edge interrupt for legacy interrupt.
>    This will be deferred till I get more details from HW team.
> 
> Changes from v3:
> *) Uses hierarchy IRQ domain for legacy interrupts since there is 1:1
>    mapping between legacy interrupt and GIC IRQ.
>    (MSI still depends on the order of IRQs populated in dt).
> 
> Changes from v2:
> *) Removed patch that modifies ks_pcie_legacy_irq_handler() to check the
>    IRQ_STATUS of INTA/B/C/D. Lorenzo's comment to create a matrix
>    LinuxIRQ x INTx will be added in AM654x PCIe support series
> *) ks_pcie_legacy_irq_handler() is made to use hwirq to get IRQ offset
>    instead of virq.
> *) default msi_irq_chip is assigned in dw_pcie_host_init() once keystone
>    assigns its msi_irq_chip
> *) Fixed other minor comments from Lorenzo and Bjorn
> 
> Changes from v1:
> *) Removed "PCI: keystone: Use "dummy_irq_chip" instead of new irqchip
> for legacy interrupt handling" from the patch series. It should be
> handled differently.
> 
> *) Added Gustavo's ACKed by and fixed a commit message.
> 
> [1] -> https://patchwork.kernel.org/patch/10681587/
> 
> Kishon Vijay Abraham I (8):
>   PCI: keystone: Cleanup interrupt related macros
>   PCI: keystone: Add separate functions for configuring MSI and legacy
>     interrupt
>   PCI: keystone: Use hwirq to get the MSI IRQ number offset
>   PCI: keystone: Cleanup ks_pcie_msi_irq_handler
>   PCI: dwc: Add support to use non default msi_irq_chip
>   PCI: keystone: Use Keystone specific msi_irq_chip
>   PCI: dwc: Remove Keystone specific dw_pcie_host_ops
>   PCI: dwc: Do not write to MSI control registers if the platform
>     doesn't use it
> 
>  drivers/pci/controller/dwc/pci-keystone.c     | 365 ++++++++++--------
>  .../pci/controller/dwc/pcie-designware-host.c |  78 ++--
>  drivers/pci/controller/dwc/pcie-designware.h  |   6 +-
>  3 files changed, 233 insertions(+), 216 deletions(-)

Applied to pci/keystone, aiming for v5.2 unless something goes
wrong with testing.

Lorenzo

Re: [PATCH v5 0/8] PCI: DWC/Keystone: MSI configuration cleanup

[Lorenzo Pieralisi]

On Thu, Mar 21, 2019 at 03:29:19PM +0530, Kishon Vijay Abraham I wrote:
> This series tries to address the comments discussed in [1] w.r.t
> removing Keystone specific callbacks defined in dw_pcie_host_ops.
> 
> This series also tries to cleanup the Keystone interrupt handling
> part.
> 
> Changes from v4:
> *) Removed legacy interrupt cleanup patch which uses hierarchy IRQ
>    domain since TI platform uses edge interrupt for legacy interrupt.
>    This will be deferred till I get more details from HW team.
> 
> Changes from v3:
> *) Uses hierarchy IRQ domain for legacy interrupts since there is 1:1
>    mapping between legacy interrupt and GIC IRQ.
>    (MSI still depends on the order of IRQs populated in dt).
> 
> Changes from v2:
> *) Removed patch that modifies ks_pcie_legacy_irq_handler() to check the
>    IRQ_STATUS of INTA/B/C/D. Lorenzo's comment to create a matrix
>    LinuxIRQ x INTx will be added in AM654x PCIe support series
> *) ks_pcie_legacy_irq_handler() is made to use hwirq to get IRQ offset
>    instead of virq.
> *) default msi_irq_chip is assigned in dw_pcie_host_init() once keystone
>    assigns its msi_irq_chip
> *) Fixed other minor comments from Lorenzo and Bjorn
> 
> Changes from v1:
> *) Removed "PCI: keystone: Use "dummy_irq_chip" instead of new irqchip
> for legacy interrupt handling" from the patch series. It should be
> handled differently.
> 
> *) Added Gustavo's ACKed by and fixed a commit message.
> 
> [1] -> https://patchwork.kernel.org/patch/10681587/
> 
> Kishon Vijay Abraham I (8):
>   PCI: keystone: Cleanup interrupt related macros
>   PCI: keystone: Add separate functions for configuring MSI and legacy
>     interrupt
>   PCI: keystone: Use hwirq to get the MSI IRQ number offset
>   PCI: keystone: Cleanup ks_pcie_msi_irq_handler
>   PCI: dwc: Add support to use non default msi_irq_chip
>   PCI: keystone: Use Keystone specific msi_irq_chip
>   PCI: dwc: Remove Keystone specific dw_pcie_host_ops
>   PCI: dwc: Do not write to MSI control registers if the platform
>     doesn't use it
> 
>  drivers/pci/controller/dwc/pci-keystone.c     | 365 ++++++++++--------
>  .../pci/controller/dwc/pcie-designware-host.c |  78 ++--
>  drivers/pci/controller/dwc/pcie-designware.h  |   6 +-
>  3 files changed, 233 insertions(+), 216 deletions(-)

Applied to pci/keystone, aiming for v5.2 unless something goes
wrong with testing.

Lorenzo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel