All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v8] x86: load FPU registers on return to userland
@ 2019-03-21 20:26 Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 01/24] x86/fpu: Remove fpu->initialized usage in __fpu__restore_sig() Sebastian Andrzej Siewior
                   ` (23 more replies)
  0 siblings, 24 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen

This is a refurbished series originally started by by Rik van Riel. The
goal is load the FPU registers on return to userland and not on every
context switch. By this optimisation we can:
- avoid loading the registers if the task stays in kernel and does
  not return to userland
- make kernel_fpu_begin() cheaper: it only saves the registers on the
  first invocation. The second invocation does not need save them again.

To access the FPU registers in kernel we need:
- disable preemption to avoid that the scheduler switches tasks. By
  doing so it would set TIF_NEED_FPU_LOAD and the FPU registers would be
  not valid.
- disable BH because the softirq might use kernel_fpu_begin() and then
  set TIF_NEED_FPU_LOAD instead loading the FPU registers on completion.

v7…v8:
Rebased on top of v5.1-rc1. And then:
- Remove a WARN_ON() in switch_fpu_finish. Turns out it can trigger
  during a preemption while the xstate is initialized.

- Provide __read_pkru_ins() and __write_pkru_ins which are symmetrical.
  __write_pkru() does the "write only if the value is different from
  current" check.

- The kernel threads now load `init_pkru_value' instead of `0' for the
  PKRU value.

- The PKRU value is also written into its xsave area of init_fpstate.

v6…v7:
Rebased on top of v5.0-rc7 and addressed Borislav Petkov's review.

v5…v6:
Rebased on top of v5.0-rc1. Integrated a few fixes which I noticed while
looking over the patches, dropped the first few patches which were
already applied.

v4…v5:
Rebased on top of a fix, noticed a problem with XSAVES and then redid
the restore on sig return (patch #26 to #28).

I don't like very much the sig save+restore thing that we are doing. It
has been always like that. I *think* that this is just because we have
nowhere to stash the FPU state while we are handling the signal. We
could add another fpu->state for the signal handler and avoid the thing.
Debian code-search revealed that `criu' is using it (and I didn't
figure out why). Nothing else (that is packaged in Debian). Maybe we
could get rid of this and if `criu' would then use a dedicated interface
for its needs rather the signal interface that happen to do what it
wants :)

v3…v4:
It has been suggested to remove the `initialized' member of the struct
fpu because it should not required be needed with lazy-FPU-restore and
would make the review easier. This is the first part of the series, the
second is basically the rebase of the v3 queue. As a result, the
diffstat became negative (which wasn't the case in previous version) :)
I tried to incorporate all the review comments that came up, some of
them were "outdated" after the removal of the `initialized' member. I'm
sorry should I missed any.

v1…v3:
v2 was never posted. I followed the idea to completely decouple PKRU
from xstate. This didn't quite work and made a few things complicated. 
One obvious required fixup is copy_fpstate_to_sigframe() where the PKRU
state needs to be fiddled into xstate. This required another
xfeatures_mask so that the sanity checks were performed and
xstate_offsets would be computed. Additionally ptrace also reads/sets
xstate in order to get/set the register and PKRU is one of them. So this
would need some fiddle, too.
In v3 I dropped that decouple idea. I also learned that the wrpkru
instruction is not privileged and so caching it in kernel does not work.
Instead I keep PKRU in xstate area and load it at context switch time
while the remaining registers are deferred (until return to userland).
The offset of PKRU within xstate is enumerated at boot time so why not
use it.

The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:

  Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/bigeasy/staging.git x86_fpu_rtu_v8

for you to fetch changes up to 7c9f11507fce5906ae0b475240fdba80b3c76a0a:

  x86/pkeys: add PKRU value to init_fpstate (2019-03-21 21:22:45 +0100)

----------------------------------------------------------------
Rik van Riel (5):
      x86/fpu: Add (__)make_fpregs_active helpers
      x86/fpu: Eager switch PKRU state
      x86/fpu: Always store the registers in copy_fpstate_to_sigframe()
      x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD
      x86/fpu: Defer FPU state load until return to userspace

Sebastian Andrzej Siewior (19):
      x86/fpu: Remove fpu->initialized usage in __fpu__restore_sig()
      x86/fpu: Remove fpu__restore()
      x86/fpu: Remove preempt_disable() in fpu__clear()
      x86/fpu: Always init the `state' in fpu__clear()
      x86/fpu: Remove fpu->initialized usage in copy_fpstate_to_sigframe()
      x86/fpu: Don't save fxregs for ia32 frames in copy_fpstate_to_sigframe()
      x86/fpu: Remove fpu->initialized
      x86/fpu: Remove user_fpu_begin()
      x86/fpu: Make __raw_xsave_addr() use feature number instead of mask
      x86/fpu: Make get_xsave_field_ptr() and get_xsave_addr() use feature number instead of mask
      x86/pkru: Provide .*_pkru_ins() functions
      x86/fpu: Only write PKRU if it is different from current
      x86/pkeys: Don't check if PKRU is zero before writting it
      x86/entry: Add TIF_NEED_FPU_LOAD
      x86/fpu: Update xstate's PKRU value on write_pkru()
      x86/fpu: Inline copy_user_to_fpregs_zeroing()
      x86/fpu: Let __fpu__restore_sig() restore the !32bit+fxsr frame from kernel memory
      x86/fpu: Merge the two code paths in __fpu__restore_sig()
      x86/pkeys: add PKRU value to init_fpstate

 Documentation/preempt-locking.txt    |   1 -
 arch/x86/entry/common.c              |   8 ++
 arch/x86/ia32/ia32_signal.c          |  17 ++-
 arch/x86/include/asm/fpu/api.h       |  31 ++++++
 arch/x86/include/asm/fpu/internal.h  | 163 ++++++++++++++---------------
 arch/x86/include/asm/fpu/signal.h    |   2 +-
 arch/x86/include/asm/fpu/types.h     |   9 --
 arch/x86/include/asm/fpu/xstate.h    |   5 +-
 arch/x86/include/asm/pgtable.h       |  28 ++++-
 arch/x86/include/asm/special_insns.h |  18 +++-
 arch/x86/include/asm/thread_info.h   |   2 +
 arch/x86/include/asm/trace/fpu.h     |   8 +-
 arch/x86/kernel/cpu/common.c         |   5 +
 arch/x86/kernel/fpu/core.c           | 194 +++++++++++++++++------------------
 arch/x86/kernel/fpu/init.c           |   2 -
 arch/x86/kernel/fpu/regset.c         |  24 ++---
 arch/x86/kernel/fpu/signal.c         | 191 +++++++++++++++-------------------
 arch/x86/kernel/fpu/xstate.c         |  42 ++++----
 arch/x86/kernel/process.c            |   2 +-
 arch/x86/kernel/process_32.c         |  11 +-
 arch/x86/kernel/process_64.c         |  11 +-
 arch/x86/kernel/signal.c             |  17 ++-
 arch/x86/kernel/traps.c              |   2 +-
 arch/x86/kvm/vmx/vmx.c               |   2 +-
 arch/x86/kvm/x86.c                   |  48 +++++----
 arch/x86/math-emu/fpu_entry.c        |   3 -
 arch/x86/mm/mpx.c                    |   6 +-
 arch/x86/mm/pkeys.c                  |  21 ++--
 28 files changed, 439 insertions(+), 434 deletions(-)

Sebastian


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 01/24] x86/fpu: Remove fpu->initialized usage in __fpu__restore_sig()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 02/24] x86/fpu: Remove fpu__restore() Sebastian Andrzej Siewior
                   ` (22 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior, Borislav Petkov

This is a preparation for the removal of the ->initialized member in the
fpu struct.
__fpu__restore_sig() is deactivating the FPU via fpu__drop() and then
setting manually ->initialized followed by fpu__restore(). The result is
that it is possible to manipulate fpu->state and the state of registers
won't be saved/restored on a context switch which would overwrite
fpu->state.

Don't access the fpu->state while the content is read from user space
and examined / sanitized. Use a temporary kmalloc() buffer for the
preparation of the FPU registers and once the state is considered okay,
load it. Should something go wrong, return with an error and without
altering the original FPU registers.

The removal of "fpu__initialize()" is a nop because fpu->initialized is
already set for the user task.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Borislav Petkov <bp@suse.de>
---
 arch/x86/include/asm/fpu/signal.h |  2 +-
 arch/x86/kernel/fpu/regset.c      |  5 ++--
 arch/x86/kernel/fpu/signal.c      | 40 ++++++++++++-------------------
 3 files changed, 18 insertions(+), 29 deletions(-)

diff --git a/arch/x86/include/asm/fpu/signal.h b/arch/x86/include/asm/fpu/signal.h
index 44bbc39a57b30..7fb516b6893a8 100644
--- a/arch/x86/include/asm/fpu/signal.h
+++ b/arch/x86/include/asm/fpu/signal.h
@@ -22,7 +22,7 @@ int ia32_setup_frame(int sig, struct ksignal *ksig,
 
 extern void convert_from_fxsr(struct user_i387_ia32_struct *env,
 			      struct task_struct *tsk);
-extern void convert_to_fxsr(struct task_struct *tsk,
+extern void convert_to_fxsr(struct fxregs_state *fxsave,
 			    const struct user_i387_ia32_struct *env);
 
 unsigned long
diff --git a/arch/x86/kernel/fpu/regset.c b/arch/x86/kernel/fpu/regset.c
index bc02f5144b958..5dbc099178a88 100644
--- a/arch/x86/kernel/fpu/regset.c
+++ b/arch/x86/kernel/fpu/regset.c
@@ -269,11 +269,10 @@ convert_from_fxsr(struct user_i387_ia32_struct *env, struct task_struct *tsk)
 		memcpy(&to[i], &from[i], sizeof(to[0]));
 }
 
-void convert_to_fxsr(struct task_struct *tsk,
+void convert_to_fxsr(struct fxregs_state *fxsave,
 		     const struct user_i387_ia32_struct *env)
 
 {
-	struct fxregs_state *fxsave = &tsk->thread.fpu.state.fxsave;
 	struct _fpreg *from = (struct _fpreg *) &env->st_space[0];
 	struct _fpxreg *to = (struct _fpxreg *) &fxsave->st_space[0];
 	int i;
@@ -350,7 +349,7 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &env, 0, -1);
 	if (!ret)
-		convert_to_fxsr(target, &env);
+		convert_to_fxsr(&target->thread.fpu.state.fxsave, &env);
 
 	/*
 	 * update the header bit in the xsave header, indicating the
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index f6a1d299627c5..a874931edf6a9 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -207,11 +207,11 @@ int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 }
 
 static inline void
-sanitize_restored_xstate(struct task_struct *tsk,
+sanitize_restored_xstate(union fpregs_state *state,
 			 struct user_i387_ia32_struct *ia32_env,
 			 u64 xfeatures, int fx_only)
 {
-	struct xregs_state *xsave = &tsk->thread.fpu.state.xsave;
+	struct xregs_state *xsave = &state->xsave;
 	struct xstate_header *header = &xsave->header;
 
 	if (use_xsave()) {
@@ -238,7 +238,7 @@ sanitize_restored_xstate(struct task_struct *tsk,
 		 */
 		xsave->i387.mxcsr &= mxcsr_feature_mask;
 
-		convert_to_fxsr(tsk, ia32_env);
+		convert_to_fxsr(&state->fxsave, ia32_env);
 	}
 }
 
@@ -284,8 +284,6 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 	if (!access_ok(buf, size))
 		return -EACCES;
 
-	fpu__initialize(fpu);
-
 	if (!static_cpu_has(X86_FEATURE_FPU))
 		return fpregs_soft_set(current, NULL,
 				       0, sizeof(struct user_i387_ia32_struct),
@@ -315,40 +313,32 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		 * header. Validate and sanitize the copied state.
 		 */
 		struct user_i387_ia32_struct env;
+		union fpregs_state *state;
 		int err = 0;
+		void *tmp;
 
-		/*
-		 * Drop the current fpu which clears fpu->initialized. This ensures
-		 * that any context-switch during the copy of the new state,
-		 * avoids the intermediate state from getting restored/saved.
-		 * Thus avoiding the new restored state from getting corrupted.
-		 * We will be ready to restore/save the state only after
-		 * fpu->initialized is again set.
-		 */
-		fpu__drop(fpu);
+		tmp = kzalloc(sizeof(*state) + fpu_kernel_xstate_size + 64, GFP_KERNEL);
+		if (!tmp)
+			return -ENOMEM;
+		state = PTR_ALIGN(tmp, 64);
 
 		if (using_compacted_format()) {
-			err = copy_user_to_xstate(&fpu->state.xsave, buf_fx);
+			err = copy_user_to_xstate(&state->xsave, buf_fx);
 		} else {
-			err = __copy_from_user(&fpu->state.xsave, buf_fx, state_size);
+			err = __copy_from_user(&state->xsave, buf_fx, state_size);
 
 			if (!err && state_size > offsetof(struct xregs_state, header))
-				err = validate_xstate_header(&fpu->state.xsave.header);
+				err = validate_xstate_header(&state->xsave.header);
 		}
 
 		if (err || __copy_from_user(&env, buf, sizeof(env))) {
-			fpstate_init(&fpu->state);
-			trace_x86_fpu_init_state(fpu);
 			err = -1;
 		} else {
-			sanitize_restored_xstate(tsk, &env, xfeatures, fx_only);
+			sanitize_restored_xstate(state, &env, xfeatures, fx_only);
+			copy_kernel_to_fpregs(state);
 		}
 
-		local_bh_disable();
-		fpu->initialized = 1;
-		fpu__restore(fpu);
-		local_bh_enable();
-
+		kfree(tmp);
 		return err;
 	} else {
 		/*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 02/24] x86/fpu: Remove fpu__restore()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 01/24] x86/fpu: Remove fpu->initialized usage in __fpu__restore_sig() Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 03/24] x86/fpu: Remove preempt_disable() in fpu__clear() Sebastian Andrzej Siewior
                   ` (21 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

There are no users of fpu__restore() so it is time to remove it.
The comment regarding fpu__restore() and TS bit is stale since commit
  b3b0870ef3ffe ("i387: do not preload FPU state at task switch time")
and has no meaning since.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 Documentation/preempt-locking.txt   |  1 -
 arch/x86/include/asm/fpu/internal.h |  1 -
 arch/x86/kernel/fpu/core.c          | 24 ------------------------
 arch/x86/kernel/process_32.c        |  4 +---
 arch/x86/kernel/process_64.c        |  4 +---
 5 files changed, 2 insertions(+), 32 deletions(-)

diff --git a/Documentation/preempt-locking.txt b/Documentation/preempt-locking.txt
index 509f5a422d571..dce336134e54a 100644
--- a/Documentation/preempt-locking.txt
+++ b/Documentation/preempt-locking.txt
@@ -52,7 +52,6 @@ preemption must be disabled around such regions.
 
 Note, some FPU functions are already explicitly preempt safe.  For example,
 kernel_fpu_begin and kernel_fpu_end will disable and enable preemption.
-However, fpu__restore() must be called with preemption disabled.
 
 
 RULE #3: Lock acquire and release must be performed by same task
diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index fb04a3ded7ddb..75a1d5f712ee7 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -28,7 +28,6 @@ extern void fpu__initialize(struct fpu *fpu);
 extern void fpu__prepare_read(struct fpu *fpu);
 extern void fpu__prepare_write(struct fpu *fpu);
 extern void fpu__save(struct fpu *fpu);
-extern void fpu__restore(struct fpu *fpu);
 extern int  fpu__restore_sig(void __user *buf, int ia32_frame);
 extern void fpu__drop(struct fpu *fpu);
 extern int  fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu);
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 2e5003fef51a9..1d3ae7988f7f2 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -303,30 +303,6 @@ void fpu__prepare_write(struct fpu *fpu)
 	}
 }
 
-/*
- * 'fpu__restore()' is called to copy FPU registers from
- * the FPU fpstate to the live hw registers and to activate
- * access to the hardware registers, so that FPU instructions
- * can be used afterwards.
- *
- * Must be called with kernel preemption disabled (for example
- * with local interrupts disabled, as it is in the case of
- * do_device_not_available()).
- */
-void fpu__restore(struct fpu *fpu)
-{
-	fpu__initialize(fpu);
-
-	/* Avoid __kernel_fpu_begin() right after fpregs_activate() */
-	kernel_fpu_disable();
-	trace_x86_fpu_before_restore(fpu);
-	fpregs_activate(fpu);
-	copy_kernel_to_fpregs(&fpu->state);
-	trace_x86_fpu_after_restore(fpu);
-	kernel_fpu_enable();
-}
-EXPORT_SYMBOL_GPL(fpu__restore);
-
 /*
  * Drops current FPU state: deactivates the fpregs and
  * the fpstate. NOTE: it still leaves previous contents
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index e471d8e6f0b24..7888a41a03cdb 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -267,9 +267,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
-	 * the GDT and LDT are properly updated, and must be
-	 * done before fpu__restore(), so the TS bit is up
-	 * to date.
+	 * the GDT and LDT are properly updated.
 	 */
 	arch_end_context_switch(next_p);
 
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 6a62f4af9fcf7..e1983b3a16c43 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -538,9 +538,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.  This
 	 * must be done after loading TLS entries in the GDT but before
-	 * loading segments that might reference them, and and it must
-	 * be done before fpu__restore(), so the TS bit is up to
-	 * date.
+	 * loading segments that might reference them.
 	 */
 	arch_end_context_switch(next_p);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 03/24] x86/fpu: Remove preempt_disable() in fpu__clear()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 01/24] x86/fpu: Remove fpu->initialized usage in __fpu__restore_sig() Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 02/24] x86/fpu: Remove fpu__restore() Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 04/24] x86/fpu: Always init the `state' " Sebastian Andrzej Siewior
                   ` (20 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior, Borislav Petkov

The preempt_disable() section was introduced in commit

  a10b6a16cdad8 ("x86/fpu: Make the fpu state change in fpu__clear() scheduler-atomic")

and it was said to be temporary.

fpu__initialize() initializes the FPU struct to its "init" value and
then sets ->initialized to 1. The last part is the important one.
The content of the `state' does not matter because it gets set via
copy_init_fpstate_to_fpregs().
A preemption here has little meaning because the registers will always be
set to the same content after copy_init_fpstate_to_fpregs(). A softirq
with a kernel_fpu_begin() could also force to save FPU's registers after
fpu__initialize() without changing the outcome here.

Remove the preempt_disable() section in fpu__clear(), preemption here
does not hurt.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
---
 arch/x86/kernel/fpu/core.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 1d3ae7988f7f2..1940319268aef 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -366,11 +366,9 @@ void fpu__clear(struct fpu *fpu)
 	 * Make sure fpstate is cleared and initialized.
 	 */
 	if (static_cpu_has(X86_FEATURE_FPU)) {
-		preempt_disable();
 		fpu__initialize(fpu);
 		user_fpu_begin();
 		copy_init_fpstate_to_fpregs();
-		preempt_enable();
 	}
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 04/24] x86/fpu: Always init the `state' in fpu__clear()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (2 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 03/24] x86/fpu: Remove preempt_disable() in fpu__clear() Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 05/24] x86/fpu: Remove fpu->initialized usage in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
                   ` (19 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior, Borislav Petkov

fpu__clear() only initializes the `state' if the FPU is present. This
initialisation is also required for the FPU-less system and takes place
in math_emulate(). Since fpu__initialize() only performs the
initialization if ->initialized is zero it does not matter that it is
invoked each time an opcode is emulated. It makes the removal of
->initialized easier if the struct is also initialized in the FPU-less
case at the same time.

Move fpu__initialize() before the FPU check so it is also performed in
the FPU-less case.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
---
 arch/x86/include/asm/fpu/internal.h | 1 -
 arch/x86/kernel/fpu/core.c          | 5 ++---
 arch/x86/math-emu/fpu_entry.c       | 3 ---
 3 files changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 75a1d5f712ee7..70ecb7c032cb4 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -24,7 +24,6 @@
 /*
  * High level FPU state handling functions:
  */
-extern void fpu__initialize(struct fpu *fpu);
 extern void fpu__prepare_read(struct fpu *fpu);
 extern void fpu__prepare_write(struct fpu *fpu);
 extern void fpu__save(struct fpu *fpu);
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 1940319268aef..e43296854e379 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -223,7 +223,7 @@ int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu)
  * Activate the current task's in-memory FPU context,
  * if it has not been used before:
  */
-void fpu__initialize(struct fpu *fpu)
+static void fpu__initialize(struct fpu *fpu)
 {
 	WARN_ON_FPU(fpu != &current->thread.fpu);
 
@@ -236,7 +236,6 @@ void fpu__initialize(struct fpu *fpu)
 		fpu->initialized = 1;
 	}
 }
-EXPORT_SYMBOL_GPL(fpu__initialize);
 
 /*
  * This function must be called before we read a task's fpstate.
@@ -365,8 +364,8 @@ void fpu__clear(struct fpu *fpu)
 	/*
 	 * Make sure fpstate is cleared and initialized.
 	 */
+	fpu__initialize(fpu);
 	if (static_cpu_has(X86_FEATURE_FPU)) {
-		fpu__initialize(fpu);
 		user_fpu_begin();
 		copy_init_fpstate_to_fpregs();
 	}
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 9e2ba7e667f61..a873da6b46d6b 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -113,9 +113,6 @@ void math_emulate(struct math_emu_info *info)
 	unsigned long code_base = 0;
 	unsigned long code_limit = 0;	/* Initialized to stop compiler warnings */
 	struct desc_struct code_descriptor;
-	struct fpu *fpu = &current->thread.fpu;
-
-	fpu__initialize(fpu);
 
 #ifdef RE_ENTRANT_CHECKING
 	if (emulating) {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 05/24] x86/fpu: Remove fpu->initialized usage in copy_fpstate_to_sigframe()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (3 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 04/24] x86/fpu: Always init the `state' " Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 06/24] x86/fpu: Don't save fxregs for ia32 frames " Sebastian Andrzej Siewior
                   ` (18 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

With lazy-FPU support the (now named variable) ->initialized was set to true if
the CPU's FPU registers were holding the a valid state of the FPU registers for
the active process. If it was set to false then the FPU state was saved in
fpu->state and the FPU was deactivated.
With lazy-FPU gone, ->initialized is always true for user threads and kernel
threads never this function so ->initialized is always true in
copy_fpstate_to_sigframe().
The using_compacted_format() check is also a leftover from the lazy-FPU time.
In the `->initialized == false' case copy_to_user() would copy the compacted
buffer while userland would expect the non-compacted format instead. So in
order to save the FPU state in the non-compacted form it issues the xsave
opcode to save the *current* FPU state.
The FPU is not enabled so the attempt raises the FPU trap, the trap restores
the FPU content and re-enables the FPU and the xsave opcode is invoked again and
succeeds. *This* does not longer work since commit

  bef8b6da9522 ("x86/fpu: Handle #NM without FPU emulation as an error")

Remove check for ->initialized because it is always true and remove the
false condition. Update the comment to reflect that the "state is always live".

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/kernel/fpu/signal.c | 35 ++++++++---------------------------
 1 file changed, 8 insertions(+), 27 deletions(-)

diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index a874931edf6a9..de83d0ed9e14e 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -144,9 +144,8 @@ static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf)
  *	buf == buf_fx for 64-bit frames and 32-bit fsave frame.
  *	buf != buf_fx for 32-bit frames with fxstate.
  *
- * If the fpu, extended register state is live, save the state directly
- * to the user frame pointed by the aligned pointer 'buf_fx'. Otherwise,
- * copy the thread's fpu state to the user frame starting at 'buf_fx'.
+ * Save the state directly to the user frame pointed by the aligned pointer
+ * 'buf_fx'.
  *
  * If this is a 32-bit frame with fxstate, put a fsave header before
  * the aligned state at 'buf_fx'.
@@ -157,7 +156,6 @@ static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf)
 int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 {
 	struct fpu *fpu = &current->thread.fpu;
-	struct xregs_state *xsave = &fpu->state.xsave;
 	struct task_struct *tsk = current;
 	int ia32_fxstate = (buf != buf_fx);
 
@@ -172,29 +170,12 @@ int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 			sizeof(struct user_i387_ia32_struct), NULL,
 			(struct _fpstate_32 __user *) buf) ? -1 : 1;
 
-	if (fpu->initialized || using_compacted_format()) {
-		/* Save the live register state to the user directly. */
-		if (copy_fpregs_to_sigframe(buf_fx))
-			return -1;
-		/* Update the thread's fxstate to save the fsave header. */
-		if (ia32_fxstate)
-			copy_fxregs_to_kernel(fpu);
-	} else {
-		/*
-		 * It is a *bug* if kernel uses compacted-format for xsave
-		 * area and we copy it out directly to a signal frame. It
-		 * should have been handled above by saving the registers
-		 * directly.
-		 */
-		if (boot_cpu_has(X86_FEATURE_XSAVES)) {
-			WARN_ONCE(1, "x86/fpu: saving compacted-format xsave area to a signal frame!\n");
-			return -1;
-		}
-
-		fpstate_sanitize_xstate(fpu);
-		if (__copy_to_user(buf_fx, xsave, fpu_user_xstate_size))
-			return -1;
-	}
+	/* Save the live register state to the user directly. */
+	if (copy_fpregs_to_sigframe(buf_fx))
+		return -1;
+	/* Update the thread's fxstate to save the fsave header. */
+	if (ia32_fxstate)
+		copy_fxregs_to_kernel(fpu);
 
 	/* Save the fsave header for the 32-bit frames. */
 	if ((ia32_fxstate || !use_fxsr()) && save_fsave_header(tsk, buf))
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 06/24] x86/fpu: Don't save fxregs for ia32 frames in copy_fpstate_to_sigframe()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (4 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 05/24] x86/fpu: Remove fpu->initialized usage in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 07/24] x86/fpu: Remove fpu->initialized Sebastian Andrzej Siewior
                   ` (17 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

In commit

  72a671ced66db ("x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels")

the 32bit and 64bit path of the signal delivery code were merged. The 32bit version:
|int save_i387_xstate_ia32(void __user *buf)
|…
|       if (cpu_has_xsave)
|               return save_i387_xsave(fp);
|       if (cpu_has_fxsr)
|               return save_i387_fxsave(fp);

The 64bit version:
|int save_i387_xstate(void __user *buf)
|…
|       if (user_has_fpu()) {
|               if (use_xsave())
|                       err = xsave_user(buf);
|               else
|                       err = fxsave_user(buf);
|
|               if (unlikely(err)) {
|                       __clear_user(buf, xstate_size);
|                       return err;

The merge:
|int save_xstate_sig(void __user *buf, void __user *buf_fx, int size)
|…
|       if (user_has_fpu()) {
|               /* Save the live register state to the user directly. */
|               if (save_user_xstate(buf_fx))
|                       return -1;
|               /* Update the thread's fxstate to save the fsave header. */
|               if (ia32_fxstate)
|                       fpu_fxsave(&tsk->thread.fpu);

I don't think that we needed to save the FPU registers to ->thread.fpu because
the registers were stored in `buf_fx'. Today the state will be restored from
`buf_fx' after the signal was handled (I assume that this was also the case
with lazy-FPU). Since commit

  66463db4fc560 ("x86, fpu: shift drop_init_fpu() from save_xstate_sig() to handle_signal()")

it is ensured that the signal handler starts with clear/fresh set of FPU
registers which means that the previous store is futile.

Remove copy_fxregs_to_kernel() because task's FPU state is cleared later in
handle_signal() via fpu__clear().

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/kernel/fpu/signal.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index de83d0ed9e14e..2f044021fde2b 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -155,7 +155,6 @@ static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf)
  */
 int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 {
-	struct fpu *fpu = &current->thread.fpu;
 	struct task_struct *tsk = current;
 	int ia32_fxstate = (buf != buf_fx);
 
@@ -173,9 +172,6 @@ int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 	/* Save the live register state to the user directly. */
 	if (copy_fpregs_to_sigframe(buf_fx))
 		return -1;
-	/* Update the thread's fxstate to save the fsave header. */
-	if (ia32_fxstate)
-		copy_fxregs_to_kernel(fpu);
 
 	/* Save the fsave header for the 32-bit frames. */
 	if ((ia32_fxstate || !use_fxsr()) && save_fsave_header(tsk, buf))
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 07/24] x86/fpu: Remove fpu->initialized
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (5 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 06/24] x86/fpu: Don't save fxregs for ia32 frames " Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 08/24] x86/fpu: Remove user_fpu_begin() Sebastian Andrzej Siewior
                   ` (16 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

The `initialized' member of the fpu struct is always set to one for user
tasks and zero for kernel tasks. This avoids saving/restoring the FPU
registers for kernel threads.

The ->initialized = 0 case for user tasks has been removed in previous changes
for instance by always an explicit init at fork() time for FPU-less system which
was otherwise delayed until the emulated opcode.

The context switch code (switch_fpu_prepare() + switch_fpu_finish())
can't unconditionally save/restore registers for kernel threads. Not only would
it slow down switch but also load a zeroed xcomp_bv for the XSAVES.

For kernel_fpu_begin() (+end) the situation is similar: EFI with runtime
services uses this before alternatives_patched is true. Which means that this
function is used too early and it wasn't the case before.

For those two cases current->mm is used to determine between user &
kernel thread. For kernel_fpu_begin() we skip save/restore of the FPU
registers.
During the context switch into a kernel thread we don't do anything.
There is no reason to save the FPU state of a kernel thread.
The reordering in __switch_to() is important because the current() pointer
needs to be valid before switch_fpu_finish() is invoked so ->mm is seen of the
new task instead the old one.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/ia32/ia32_signal.c         | 17 +++----
 arch/x86/include/asm/fpu/internal.h | 18 ++++----
 arch/x86/include/asm/fpu/types.h    |  9 ----
 arch/x86/include/asm/trace/fpu.h    |  5 +--
 arch/x86/kernel/fpu/core.c          | 70 +++++++++--------------------
 arch/x86/kernel/fpu/init.c          |  2 -
 arch/x86/kernel/fpu/regset.c        | 19 ++------
 arch/x86/kernel/fpu/xstate.c        |  2 -
 arch/x86/kernel/process_32.c        |  4 +-
 arch/x86/kernel/process_64.c        |  4 +-
 arch/x86/kernel/signal.c            | 17 +++----
 arch/x86/mm/pkeys.c                 |  7 +--
 12 files changed, 53 insertions(+), 121 deletions(-)

diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 321fe5f5d0e96..6eeb3249f22ff 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -216,8 +216,7 @@ static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 				 size_t frame_size,
 				 void __user **fpstate)
 {
-	struct fpu *fpu = &current->thread.fpu;
-	unsigned long sp;
+	unsigned long sp, fx_aligned, math_size;
 
 	/* Default to using normal stack */
 	sp = regs->sp;
@@ -231,15 +230,11 @@ static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 		 ksig->ka.sa.sa_restorer)
 		sp = (unsigned long) ksig->ka.sa.sa_restorer;
 
-	if (fpu->initialized) {
-		unsigned long fx_aligned, math_size;
-
-		sp = fpu__alloc_mathframe(sp, 1, &fx_aligned, &math_size);
-		*fpstate = (struct _fpstate_32 __user *) sp;
-		if (copy_fpstate_to_sigframe(*fpstate, (void __user *)fx_aligned,
-				    math_size) < 0)
-			return (void __user *) -1L;
-	}
+	sp = fpu__alloc_mathframe(sp, 1, &fx_aligned, &math_size);
+	*fpstate = (struct _fpstate_32 __user *) sp;
+	if (copy_fpstate_to_sigframe(*fpstate, (void __user *)fx_aligned,
+				     math_size) < 0)
+		return (void __user *) -1L;
 
 	sp -= frame_size;
 	/* Align the stack pointer according to the i386 ABI,
diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 70ecb7c032cb4..fd95f1411eb5c 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -494,11 +494,14 @@ static inline void fpregs_activate(struct fpu *fpu)
  *
  *  - switch_fpu_finish() restores the new state as
  *    necessary.
+ *
+ * The FPU context is only stored/restore for user task and ->mm is used to
+ * distinguish between kernel and user threads.
  */
 static inline void
 switch_fpu_prepare(struct fpu *old_fpu, int cpu)
 {
-	if (static_cpu_has(X86_FEATURE_FPU) && old_fpu->initialized) {
+	if (static_cpu_has(X86_FEATURE_FPU) && current->mm) {
 		if (!copy_fpregs_to_fpstate(old_fpu))
 			old_fpu->last_cpu = -1;
 		else
@@ -506,8 +509,7 @@ switch_fpu_prepare(struct fpu *old_fpu, int cpu)
 
 		/* But leave fpu_fpregs_owner_ctx! */
 		trace_x86_fpu_regs_deactivated(old_fpu);
-	} else
-		old_fpu->last_cpu = -1;
+	}
 }
 
 /*
@@ -520,12 +522,12 @@ switch_fpu_prepare(struct fpu *old_fpu, int cpu)
  */
 static inline void switch_fpu_finish(struct fpu *new_fpu, int cpu)
 {
-	bool preload = static_cpu_has(X86_FEATURE_FPU) &&
-		       new_fpu->initialized;
+	if (static_cpu_has(X86_FEATURE_FPU)) {
+		if (!fpregs_state_valid(new_fpu, cpu)) {
+			if (current->mm)
+				copy_kernel_to_fpregs(&new_fpu->state);
+		}
 
-	if (preload) {
-		if (!fpregs_state_valid(new_fpu, cpu))
-			copy_kernel_to_fpregs(&new_fpu->state);
 		fpregs_activate(new_fpu);
 	}
 }
diff --git a/arch/x86/include/asm/fpu/types.h b/arch/x86/include/asm/fpu/types.h
index 2e32e178e0645..f098f6cab94bf 100644
--- a/arch/x86/include/asm/fpu/types.h
+++ b/arch/x86/include/asm/fpu/types.h
@@ -293,15 +293,6 @@ struct fpu {
 	 */
 	unsigned int			last_cpu;
 
-	/*
-	 * @initialized:
-	 *
-	 * This flag indicates whether this context is initialized: if the task
-	 * is not running then we can restore from this context, if the task
-	 * is running then we should save into this context.
-	 */
-	unsigned char			initialized;
-
 	/*
 	 * @avx512_timestamp:
 	 *
diff --git a/arch/x86/include/asm/trace/fpu.h b/arch/x86/include/asm/trace/fpu.h
index 069c04be15076..bd65f6ba950f8 100644
--- a/arch/x86/include/asm/trace/fpu.h
+++ b/arch/x86/include/asm/trace/fpu.h
@@ -13,22 +13,19 @@ DECLARE_EVENT_CLASS(x86_fpu,
 
 	TP_STRUCT__entry(
 		__field(struct fpu *, fpu)
-		__field(bool, initialized)
 		__field(u64, xfeatures)
 		__field(u64, xcomp_bv)
 		),
 
 	TP_fast_assign(
 		__entry->fpu		= fpu;
-		__entry->initialized	= fpu->initialized;
 		if (boot_cpu_has(X86_FEATURE_OSXSAVE)) {
 			__entry->xfeatures = fpu->state.xsave.header.xfeatures;
 			__entry->xcomp_bv  = fpu->state.xsave.header.xcomp_bv;
 		}
 	),
-	TP_printk("x86/fpu: %p initialized: %d xfeatures: %llx xcomp_bv: %llx",
+	TP_printk("x86/fpu: %p xfeatures: %llx xcomp_bv: %llx",
 			__entry->fpu,
-			__entry->initialized,
 			__entry->xfeatures,
 			__entry->xcomp_bv
 	)
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index e43296854e379..97e27de2b7c05 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -101,7 +101,7 @@ static void __kernel_fpu_begin(void)
 
 	kernel_fpu_disable();
 
-	if (fpu->initialized) {
+	if (current->mm) {
 		/*
 		 * Ignore return value -- we don't care if reg state
 		 * is clobbered.
@@ -116,7 +116,7 @@ static void __kernel_fpu_end(void)
 {
 	struct fpu *fpu = &current->thread.fpu;
 
-	if (fpu->initialized)
+	if (current->mm)
 		copy_kernel_to_fpregs(&fpu->state);
 
 	kernel_fpu_enable();
@@ -147,11 +147,10 @@ void fpu__save(struct fpu *fpu)
 
 	preempt_disable();
 	trace_x86_fpu_before_save(fpu);
-	if (fpu->initialized) {
-		if (!copy_fpregs_to_fpstate(fpu)) {
-			copy_kernel_to_fpregs(&fpu->state);
-		}
-	}
+
+	if (!copy_fpregs_to_fpstate(fpu))
+		copy_kernel_to_fpregs(&fpu->state);
+
 	trace_x86_fpu_after_save(fpu);
 	preempt_enable();
 }
@@ -190,7 +189,7 @@ int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu)
 {
 	dst_fpu->last_cpu = -1;
 
-	if (!src_fpu->initialized || !static_cpu_has(X86_FEATURE_FPU))
+	if (!static_cpu_has(X86_FEATURE_FPU))
 		return 0;
 
 	WARN_ON_FPU(src_fpu != &current->thread.fpu);
@@ -227,14 +226,10 @@ static void fpu__initialize(struct fpu *fpu)
 {
 	WARN_ON_FPU(fpu != &current->thread.fpu);
 
-	if (!fpu->initialized) {
-		fpstate_init(&fpu->state);
-		trace_x86_fpu_init_state(fpu);
+	fpstate_init(&fpu->state);
+	trace_x86_fpu_init_state(fpu);
 
-		trace_x86_fpu_activate_state(fpu);
-		/* Safe to do for the current task: */
-		fpu->initialized = 1;
-	}
+	trace_x86_fpu_activate_state(fpu);
 }
 
 /*
@@ -247,32 +242,20 @@ static void fpu__initialize(struct fpu *fpu)
  *
  * - or it's called for stopped tasks (ptrace), in which case the
  *   registers were already saved by the context-switch code when
- *   the task scheduled out - we only have to initialize the registers
- *   if they've never been initialized.
+ *   the task scheduled out.
  *
  * If the task has used the FPU before then save it.
  */
 void fpu__prepare_read(struct fpu *fpu)
 {
-	if (fpu == &current->thread.fpu) {
+	if (fpu == &current->thread.fpu)
 		fpu__save(fpu);
-	} else {
-		if (!fpu->initialized) {
-			fpstate_init(&fpu->state);
-			trace_x86_fpu_init_state(fpu);
-
-			trace_x86_fpu_activate_state(fpu);
-			/* Safe to do for current and for stopped child tasks: */
-			fpu->initialized = 1;
-		}
-	}
 }
 
 /*
  * This function must be called before we write a task's fpstate.
  *
- * If the task has used the FPU before then invalidate any cached FPU registers.
- * If the task has not used the FPU before then initialize its fpstate.
+ * Invalidate any cached FPU registers.
  *
  * After this function call, after registers in the fpstate are
  * modified and the child task has woken up, the child task will
@@ -289,17 +272,8 @@ void fpu__prepare_write(struct fpu *fpu)
 	 */
 	WARN_ON_FPU(fpu == &current->thread.fpu);
 
-	if (fpu->initialized) {
-		/* Invalidate any cached state: */
-		__fpu_invalidate_fpregs_state(fpu);
-	} else {
-		fpstate_init(&fpu->state);
-		trace_x86_fpu_init_state(fpu);
-
-		trace_x86_fpu_activate_state(fpu);
-		/* Safe to do for stopped child tasks: */
-		fpu->initialized = 1;
-	}
+	/* Invalidate any cached state: */
+	__fpu_invalidate_fpregs_state(fpu);
 }
 
 /*
@@ -316,17 +290,13 @@ void fpu__drop(struct fpu *fpu)
 	preempt_disable();
 
 	if (fpu == &current->thread.fpu) {
-		if (fpu->initialized) {
-			/* Ignore delayed exceptions from user space */
-			asm volatile("1: fwait\n"
-				     "2:\n"
-				     _ASM_EXTABLE(1b, 2b));
-			fpregs_deactivate(fpu);
-		}
+		/* Ignore delayed exceptions from user space */
+		asm volatile("1: fwait\n"
+			     "2:\n"
+			     _ASM_EXTABLE(1b, 2b));
+		fpregs_deactivate(fpu);
 	}
 
-	fpu->initialized = 0;
-
 	trace_x86_fpu_dropped(fpu);
 
 	preempt_enable();
diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index 6abd83572b016..20d8fa7124c77 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -239,8 +239,6 @@ static void __init fpu__init_system_ctx_switch(void)
 
 	WARN_ON_FPU(!on_boot_cpu);
 	on_boot_cpu = 0;
-
-	WARN_ON_FPU(current->thread.fpu.initialized);
 }
 
 /*
diff --git a/arch/x86/kernel/fpu/regset.c b/arch/x86/kernel/fpu/regset.c
index 5dbc099178a88..d652b939ccfb5 100644
--- a/arch/x86/kernel/fpu/regset.c
+++ b/arch/x86/kernel/fpu/regset.c
@@ -15,16 +15,12 @@
  */
 int regset_fpregs_active(struct task_struct *target, const struct user_regset *regset)
 {
-	struct fpu *target_fpu = &target->thread.fpu;
-
-	return target_fpu->initialized ? regset->n : 0;
+	return regset->n;
 }
 
 int regset_xregset_fpregs_active(struct task_struct *target, const struct user_regset *regset)
 {
-	struct fpu *target_fpu = &target->thread.fpu;
-
-	if (boot_cpu_has(X86_FEATURE_FXSR) && target_fpu->initialized)
+	if (boot_cpu_has(X86_FEATURE_FXSR))
 		return regset->n;
 	else
 		return 0;
@@ -370,16 +366,9 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 int dump_fpu(struct pt_regs *regs, struct user_i387_struct *ufpu)
 {
 	struct task_struct *tsk = current;
-	struct fpu *fpu = &tsk->thread.fpu;
-	int fpvalid;
 
-	fpvalid = fpu->initialized;
-	if (fpvalid)
-		fpvalid = !fpregs_get(tsk, NULL,
-				      0, sizeof(struct user_i387_ia32_struct),
-				      ufpu, NULL);
-
-	return fpvalid;
+	return !fpregs_get(tsk, NULL, 0, sizeof(struct user_i387_ia32_struct),
+			   ufpu, NULL);
 }
 EXPORT_SYMBOL(dump_fpu);
 
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index d7432c2b10514..8bfcc5b9e04b7 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -892,8 +892,6 @@ const void *get_xsave_field_ptr(int xsave_state)
 {
 	struct fpu *fpu = &current->thread.fpu;
 
-	if (!fpu->initialized)
-		return NULL;
 	/*
 	 * fpu__save() takes the CPU's xstate registers
 	 * and saves them off to the 'fpu memory buffer.
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 7888a41a03cdb..77d9eb43ccac8 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -288,10 +288,10 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	if (prev->gs | next->gs)
 		lazy_load_gs(next->gs);
 
-	switch_fpu_finish(next_fpu, cpu);
-
 	this_cpu_write(current_task, next_p);
 
+	switch_fpu_finish(next_fpu, cpu);
+
 	/* Load the Intel cache allocation PQR MSR. */
 	resctrl_sched_in();
 
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e1983b3a16c43..ffea7c557963a 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -566,14 +566,14 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	x86_fsgsbase_load(prev, next);
 
-	switch_fpu_finish(next_fpu, cpu);
-
 	/*
 	 * Switch the PDA and FPU contexts.
 	 */
 	this_cpu_write(current_task, next_p);
 	this_cpu_write(cpu_current_top_of_stack, task_top_of_stack(next_p));
 
+	switch_fpu_finish(next_fpu, cpu);
+
 	/* Reload sp0. */
 	update_task_stack(next_p);
 
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 08dfd4c1a4f95..6f45f795690f6 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -246,7 +246,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 	unsigned long sp = regs->sp;
 	unsigned long buf_fx = 0;
 	int onsigstack = on_sig_stack(sp);
-	struct fpu *fpu = &current->thread.fpu;
+	int ret;
 
 	/* redzone */
 	if (IS_ENABLED(CONFIG_X86_64))
@@ -265,11 +265,9 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 		sp = (unsigned long) ka->sa.sa_restorer;
 	}
 
-	if (fpu->initialized) {
-		sp = fpu__alloc_mathframe(sp, IS_ENABLED(CONFIG_X86_32),
-					  &buf_fx, &math_size);
-		*fpstate = (void __user *)sp;
-	}
+	sp = fpu__alloc_mathframe(sp, IS_ENABLED(CONFIG_X86_32),
+				  &buf_fx, &math_size);
+	*fpstate = (void __user *)sp;
 
 	sp = align_sigframe(sp - frame_size);
 
@@ -281,8 +279,8 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 		return (void __user *)-1L;
 
 	/* save i387 and extended state */
-	if (fpu->initialized &&
-	    copy_fpstate_to_sigframe(*fpstate, (void __user *)buf_fx, math_size) < 0)
+	ret = copy_fpstate_to_sigframe(*fpstate, (void __user *)buf_fx, math_size);
+	if (ret < 0)
 		return (void __user *)-1L;
 
 	return (void __user *)sp;
@@ -763,8 +761,7 @@ handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 		/*
 		 * Ensure the signal handler starts with the new fpu state.
 		 */
-		if (fpu->initialized)
-			fpu__clear(fpu);
+		fpu__clear(fpu);
 	}
 	signal_setup_done(failed, ksig, stepping);
 }
diff --git a/arch/x86/mm/pkeys.c b/arch/x86/mm/pkeys.c
index 047a77f6a10cb..05bb9a44eb1c3 100644
--- a/arch/x86/mm/pkeys.c
+++ b/arch/x86/mm/pkeys.c
@@ -39,17 +39,12 @@ int __execute_only_pkey(struct mm_struct *mm)
 	 * dance to set PKRU if we do not need to.  Check it
 	 * first and assume that if the execute-only pkey is
 	 * write-disabled that we do not have to set it
-	 * ourselves.  We need preempt off so that nobody
-	 * can make fpregs inactive.
+	 * ourselves.
 	 */
-	preempt_disable();
 	if (!need_to_set_mm_pkey &&
-	    current->thread.fpu.initialized &&
 	    !__pkru_allows_read(read_pkru(), execute_only_pkey)) {
-		preempt_enable();
 		return execute_only_pkey;
 	}
-	preempt_enable();
 
 	/*
 	 * Set up PKRU so that it denies access for everything
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 08/24] x86/fpu: Remove user_fpu_begin()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (6 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 07/24] x86/fpu: Remove fpu->initialized Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 09/24] x86/fpu: Add (__)make_fpregs_active helpers Sebastian Andrzej Siewior
                   ` (15 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior, Borislav Petkov

user_fpu_begin() sets fpu_fpregs_owner_ctx to task's fpu struct. This is
always the case since there is no lazy FPU anymore.

fpu_fpregs_owner_ctx is used during context switch to decide if it needs
to load the saved registers or if the currently loaded registers are
valid. It could be skipped during
	taskA -> kernel thread -> taskA

because the switch to kernel thread would not alter the CPU's FPU state.

Since this field is always updated during context switch and never
invalidated, setting it manually (in user context) makes no difference.
A kernel thread with kernel_fpu_begin() block could set
fpu_fpregs_owner_ctx to NULL but a kernel thread does not use
user_fpu_begin().
This is a leftover from the lazy-FPU time.

Remove user_fpu_begin(), it does not change fpu_fpregs_owner_ctx's
content.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
---
 arch/x86/include/asm/fpu/internal.h | 17 -----------------
 arch/x86/kernel/fpu/core.c          |  4 +---
 arch/x86/kernel/fpu/signal.c        |  1 -
 3 files changed, 1 insertion(+), 21 deletions(-)

diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index fd95f1411eb5c..df98bc7f1c8d8 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -532,23 +532,6 @@ static inline void switch_fpu_finish(struct fpu *new_fpu, int cpu)
 	}
 }
 
-/*
- * Needs to be preemption-safe.
- *
- * NOTE! user_fpu_begin() must be used only immediately before restoring
- * the save state. It does not do any saving/restoring on its own. In
- * lazy FPU mode, it is just an optimization to avoid a #NM exception,
- * the task can lose the FPU right after preempt_enable().
- */
-static inline void user_fpu_begin(void)
-{
-	struct fpu *fpu = &current->thread.fpu;
-
-	preempt_disable();
-	fpregs_activate(fpu);
-	preempt_enable();
-}
-
 /*
  * MXCSR and XCR definitions:
  */
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 97e27de2b7c05..739ca3ae2bdcd 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -335,10 +335,8 @@ void fpu__clear(struct fpu *fpu)
 	 * Make sure fpstate is cleared and initialized.
 	 */
 	fpu__initialize(fpu);
-	if (static_cpu_has(X86_FEATURE_FPU)) {
-		user_fpu_begin();
+	if (static_cpu_has(X86_FEATURE_FPU))
 		copy_init_fpstate_to_fpregs();
-	}
 }
 
 /*
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 2f044021fde2b..6475320939ce3 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -322,7 +322,6 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		 * For 64-bit frames and 32-bit fsave frames, restore the user
 		 * state to the registers directly (with exceptions handled).
 		 */
-		user_fpu_begin();
 		if (copy_user_to_fpregs_zeroing(buf_fx, xfeatures, fx_only)) {
 			fpu__clear(fpu);
 			return -1;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 09/24] x86/fpu: Add (__)make_fpregs_active helpers
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (7 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 08/24] x86/fpu: Remove user_fpu_begin() Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 10/24] x86/fpu: Make __raw_xsave_addr() use feature number instead of mask Sebastian Andrzej Siewior
                   ` (14 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

From: Rik van Riel <riel@surriel.com>

Add helper function that ensures the floating point registers for
the current task are active. Use with preemption disabled.

Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/include/asm/fpu/api.h      | 11 +++++++++++
 arch/x86/include/asm/fpu/internal.h | 19 +++++++++++--------
 2 files changed, 22 insertions(+), 8 deletions(-)

diff --git a/arch/x86/include/asm/fpu/api.h b/arch/x86/include/asm/fpu/api.h
index b56d504af6545..73e684160f354 100644
--- a/arch/x86/include/asm/fpu/api.h
+++ b/arch/x86/include/asm/fpu/api.h
@@ -10,6 +10,7 @@
 
 #ifndef _ASM_X86_FPU_API_H
 #define _ASM_X86_FPU_API_H
+#include <linux/preempt.h>
 
 /*
  * Use kernel_fpu_begin/end() if you intend to use FPU in kernel context. It
@@ -22,6 +23,16 @@ extern void kernel_fpu_begin(void);
 extern void kernel_fpu_end(void);
 extern bool irq_fpu_usable(void);
 
+static inline void fpregs_lock(void)
+{
+	preempt_disable();
+}
+
+static inline void fpregs_unlock(void)
+{
+	preempt_enable();
+}
+
 /*
  * Query the presence of one or more xfeatures. Works on any legacy CPU as well.
  *
diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index df98bc7f1c8d8..237ff8dc8559b 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -484,6 +484,15 @@ static inline void fpregs_activate(struct fpu *fpu)
 	trace_x86_fpu_regs_activated(fpu);
 }
 
+static inline void __fpregs_load_activate(struct fpu *fpu, int cpu)
+{
+	if (!fpregs_state_valid(fpu, cpu)) {
+		if (current->mm)
+			copy_kernel_to_fpregs(&fpu->state);
+		fpregs_activate(fpu);
+	}
+}
+
 /*
  * FPU state switching for scheduling.
  *
@@ -522,14 +531,8 @@ switch_fpu_prepare(struct fpu *old_fpu, int cpu)
  */
 static inline void switch_fpu_finish(struct fpu *new_fpu, int cpu)
 {
-	if (static_cpu_has(X86_FEATURE_FPU)) {
-		if (!fpregs_state_valid(new_fpu, cpu)) {
-			if (current->mm)
-				copy_kernel_to_fpregs(&new_fpu->state);
-		}
-
-		fpregs_activate(new_fpu);
-	}
+	if (static_cpu_has(X86_FEATURE_FPU))
+		__fpregs_load_activate(new_fpu, cpu);
 }
 
 /*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 10/24] x86/fpu: Make __raw_xsave_addr() use feature number instead of mask
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (8 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 09/24] x86/fpu: Add (__)make_fpregs_active helpers Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 11/24] x86/fpu: Make get_xsave_field_ptr() and get_xsave_addr() " Sebastian Andrzej Siewior
                   ` (13 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior, Borislav Petkov

Most users of __raw_xsave_addr() use a feature number, shift it to a
mask and then __raw_xsave_addr() shifts it back to the feature number.

Make __raw_xsave_addr() use the feature number as an argument.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
---
 arch/x86/kernel/fpu/xstate.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 8bfcc5b9e04b7..4f7f3c5d0d0cf 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -805,20 +805,18 @@ void fpu__resume_cpu(void)
 }
 
 /*
- * Given an xstate feature mask, calculate where in the xsave
+ * Given an xstate feature nr, calculate where in the xsave
  * buffer the state is.  Callers should ensure that the buffer
  * is valid.
  */
-static void *__raw_xsave_addr(struct xregs_state *xsave, int xstate_feature_mask)
+static void *__raw_xsave_addr(struct xregs_state *xsave, int xfeature_nr)
 {
-	int feature_nr = fls64(xstate_feature_mask) - 1;
-
-	if (!xfeature_enabled(feature_nr)) {
+	if (!xfeature_enabled(xfeature_nr)) {
 		WARN_ON_FPU(1);
 		return NULL;
 	}
 
-	return (void *)xsave + xstate_comp_offsets[feature_nr];
+	return (void *)xsave + xstate_comp_offsets[xfeature_nr];
 }
 /*
  * Given the xsave area and a state inside, this function returns the
@@ -840,6 +838,7 @@ static void *__raw_xsave_addr(struct xregs_state *xsave, int xstate_feature_mask
  */
 void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
 {
+	int xfeature_nr;
 	/*
 	 * Do we even *have* xsave state?
 	 */
@@ -867,7 +866,8 @@ void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
 	if (!(xsave->header.xfeatures & xstate_feature))
 		return NULL;
 
-	return __raw_xsave_addr(xsave, xstate_feature);
+	xfeature_nr = fls64(xstate_feature) - 1;
+	return __raw_xsave_addr(xsave, xfeature_nr);
 }
 EXPORT_SYMBOL_GPL(get_xsave_addr);
 
@@ -1014,7 +1014,7 @@ int copy_xstate_to_kernel(void *kbuf, struct xregs_state *xsave, unsigned int of
 		 * Copy only in-use xstates:
 		 */
 		if ((header.xfeatures >> i) & 1) {
-			void *src = __raw_xsave_addr(xsave, 1 << i);
+			void *src = __raw_xsave_addr(xsave, i);
 
 			offset = xstate_offsets[i];
 			size = xstate_sizes[i];
@@ -1100,7 +1100,7 @@ int copy_xstate_to_user(void __user *ubuf, struct xregs_state *xsave, unsigned i
 		 * Copy only in-use xstates:
 		 */
 		if ((header.xfeatures >> i) & 1) {
-			void *src = __raw_xsave_addr(xsave, 1 << i);
+			void *src = __raw_xsave_addr(xsave, i);
 
 			offset = xstate_offsets[i];
 			size = xstate_sizes[i];
@@ -1157,7 +1157,7 @@ int copy_kernel_to_xstate(struct xregs_state *xsave, const void *kbuf)
 		u64 mask = ((u64)1 << i);
 
 		if (hdr.xfeatures & mask) {
-			void *dst = __raw_xsave_addr(xsave, 1 << i);
+			void *dst = __raw_xsave_addr(xsave, i);
 
 			offset = xstate_offsets[i];
 			size = xstate_sizes[i];
@@ -1211,7 +1211,7 @@ int copy_user_to_xstate(struct xregs_state *xsave, const void __user *ubuf)
 		u64 mask = ((u64)1 << i);
 
 		if (hdr.xfeatures & mask) {
-			void *dst = __raw_xsave_addr(xsave, 1 << i);
+			void *dst = __raw_xsave_addr(xsave, i);
 
 			offset = xstate_offsets[i];
 			size = xstate_sizes[i];
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 11/24] x86/fpu: Make get_xsave_field_ptr() and get_xsave_addr() use feature number instead of mask
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (9 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 10/24] x86/fpu: Make __raw_xsave_addr() use feature number instead of mask Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 12/24] x86/pkru: Provide .*_pkru_ins() functions Sebastian Andrzej Siewior
                   ` (12 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

After changing the argument of __raw_xsave_addr() from a mask to number
Dave suggested to check if it makes sense to do the same for
get_xsave_addr(). As it turns out it does. Only get_xsave_addr() needs
the mask to check if the requested feature is part of what is
support/saved and then uses the number again. The shift operation is
cheaper compared to "find last bit set". Also, the feature number uses
less opcode space compared to the mask :)

Make get_xsave_addr() argument a xfeature number instead of mask and fix
up its callers.
As part of this use xfeature_nr and xfeature_mask consistently.
This results in changes to the kvm code as:
	feature -> xfeature_mask
	index -> xfeature_nr

Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/include/asm/fpu/xstate.h |  4 ++--
 arch/x86/kernel/fpu/xstate.c      | 22 ++++++++++------------
 arch/x86/kernel/traps.c           |  2 +-
 arch/x86/kvm/x86.c                | 28 ++++++++++++++--------------
 arch/x86/mm/mpx.c                 |  6 +++---
 5 files changed, 30 insertions(+), 32 deletions(-)

diff --git a/arch/x86/include/asm/fpu/xstate.h b/arch/x86/include/asm/fpu/xstate.h
index 48581988d78c7..fbe41f808e5d8 100644
--- a/arch/x86/include/asm/fpu/xstate.h
+++ b/arch/x86/include/asm/fpu/xstate.h
@@ -46,8 +46,8 @@ extern void __init update_regset_xstate_info(unsigned int size,
 					     u64 xstate_mask);
 
 void fpu__xstate_clear_all_cpu_caps(void);
-void *get_xsave_addr(struct xregs_state *xsave, int xstate);
-const void *get_xsave_field_ptr(int xstate_field);
+void *get_xsave_addr(struct xregs_state *xsave, int xfeature_nr);
+const void *get_xsave_field_ptr(int xfeature_nr);
 int using_compacted_format(void);
 int copy_xstate_to_kernel(void *kbuf, struct xregs_state *xsave, unsigned int offset, unsigned int size);
 int copy_xstate_to_user(void __user *ubuf, struct xregs_state *xsave, unsigned int offset, unsigned int size);
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 4f7f3c5d0d0cf..9c459fd1d38e6 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -830,15 +830,14 @@ static void *__raw_xsave_addr(struct xregs_state *xsave, int xfeature_nr)
  *
  * Inputs:
  *	xstate: the thread's storage area for all FPU data
- *	xstate_feature: state which is defined in xsave.h (e.g.
- *	XFEATURE_MASK_FP, XFEATURE_MASK_SSE, etc...)
+ *	xfeature_nr: state which is defined in xsave.h (e.g. XFEATURE_FP,
+ *	XFEATURE_SSE, etc...)
  * Output:
  *	address of the state in the xsave area, or NULL if the
  *	field is not present in the xsave buffer.
  */
-void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
+void *get_xsave_addr(struct xregs_state *xsave, int xfeature_nr)
 {
-	int xfeature_nr;
 	/*
 	 * Do we even *have* xsave state?
 	 */
@@ -850,11 +849,11 @@ void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
 	 * have not enabled.  Remember that pcntxt_mask is
 	 * what we write to the XCR0 register.
 	 */
-	WARN_ONCE(!(xfeatures_mask & xstate_feature),
+	WARN_ONCE(!(xfeatures_mask & BIT_ULL(xfeature_nr)),
 		  "get of unsupported state");
 	/*
 	 * This assumes the last 'xsave*' instruction to
-	 * have requested that 'xstate_feature' be saved.
+	 * have requested that 'xfeature_nr' be saved.
 	 * If it did not, we might be seeing and old value
 	 * of the field in the buffer.
 	 *
@@ -863,10 +862,9 @@ void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
 	 * or because the "init optimization" caused it
 	 * to not be saved.
 	 */
-	if (!(xsave->header.xfeatures & xstate_feature))
+	if (!(xsave->header.xfeatures & BIT_ULL(xfeature_nr)))
 		return NULL;
 
-	xfeature_nr = fls64(xstate_feature) - 1;
 	return __raw_xsave_addr(xsave, xfeature_nr);
 }
 EXPORT_SYMBOL_GPL(get_xsave_addr);
@@ -882,13 +880,13 @@ EXPORT_SYMBOL_GPL(get_xsave_addr);
  * Note that this only works on the current task.
  *
  * Inputs:
- *	@xsave_state: state which is defined in xsave.h (e.g. XFEATURE_MASK_FP,
- *	XFEATURE_MASK_SSE, etc...)
+ *	@xfeature_nr: state which is defined in xsave.h (e.g. XFEATURE_FP,
+ *	XFEATURE_SSE, etc...)
  * Output:
  *	address of the state in the xsave area or NULL if the state
  *	is not present or is in its 'init state'.
  */
-const void *get_xsave_field_ptr(int xsave_state)
+const void *get_xsave_field_ptr(int xfeature_nr)
 {
 	struct fpu *fpu = &current->thread.fpu;
 
@@ -898,7 +896,7 @@ const void *get_xsave_field_ptr(int xsave_state)
 	 */
 	fpu__save(fpu);
 
-	return get_xsave_addr(&fpu->state.xsave, xsave_state);
+	return get_xsave_addr(&fpu->state.xsave, xfeature_nr);
 }
 
 #ifdef CONFIG_ARCH_HAS_PKEYS
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index d26f9e9c3d830..8b6d03e55d2f7 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -456,7 +456,7 @@ dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
 	 * which is all zeros which indicates MPX was not
 	 * responsible for the exception.
 	 */
-	bndcsr = get_xsave_field_ptr(XFEATURE_MASK_BNDCSR);
+	bndcsr = get_xsave_field_ptr(XFEATURE_BNDCSR);
 	if (!bndcsr)
 		goto exit_trap;
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 65e4559eef2fc..aa5fe360df50b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3662,15 +3662,15 @@ static void fill_xsave(u8 *dest, struct kvm_vcpu *vcpu)
 	 */
 	valid = xstate_bv & ~XFEATURE_MASK_FPSSE;
 	while (valid) {
-		u64 feature = valid & -valid;
-		int index = fls64(feature) - 1;
-		void *src = get_xsave_addr(xsave, feature);
+		u64 xfeature_mask = valid & -valid;
+		int xfeature_nr = fls64(xfeature_mask) - 1;
+		void *src = get_xsave_addr(xsave, xfeature_nr);
 
 		if (src) {
 			u32 size, offset, ecx, edx;
-			cpuid_count(XSTATE_CPUID, index,
+			cpuid_count(XSTATE_CPUID, xfeature_nr,
 				    &size, &offset, &ecx, &edx);
-			if (feature == XFEATURE_MASK_PKRU)
+			if (xfeature_nr == XFEATURE_PKRU)
 				memcpy(dest + offset, &vcpu->arch.pkru,
 				       sizeof(vcpu->arch.pkru));
 			else
@@ -3678,7 +3678,7 @@ static void fill_xsave(u8 *dest, struct kvm_vcpu *vcpu)
 
 		}
 
-		valid -= feature;
+		valid -= xfeature_mask;
 	}
 }
 
@@ -3705,22 +3705,22 @@ static void load_xsave(struct kvm_vcpu *vcpu, u8 *src)
 	 */
 	valid = xstate_bv & ~XFEATURE_MASK_FPSSE;
 	while (valid) {
-		u64 feature = valid & -valid;
-		int index = fls64(feature) - 1;
-		void *dest = get_xsave_addr(xsave, feature);
+		u64 xfeature_mask = valid & -valid;
+		int xfeature_nr = fls64(xfeature_mask) - 1;
+		void *dest = get_xsave_addr(xsave, xfeature_nr);
 
 		if (dest) {
 			u32 size, offset, ecx, edx;
-			cpuid_count(XSTATE_CPUID, index,
+			cpuid_count(XSTATE_CPUID, xfeature_nr,
 				    &size, &offset, &ecx, &edx);
-			if (feature == XFEATURE_MASK_PKRU)
+			if (xfeature_nr == XFEATURE_PKRU)
 				memcpy(&vcpu->arch.pkru, src + offset,
 				       sizeof(vcpu->arch.pkru));
 			else
 				memcpy(dest, src + offset, size);
 		}
 
-		valid -= feature;
+		valid -= xfeature_mask;
 	}
 }
 
@@ -8821,11 +8821,11 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 		if (init_event)
 			kvm_put_guest_fpu(vcpu);
 		mpx_state_buffer = get_xsave_addr(&vcpu->arch.guest_fpu->state.xsave,
-					XFEATURE_MASK_BNDREGS);
+					XFEATURE_BNDREGS);
 		if (mpx_state_buffer)
 			memset(mpx_state_buffer, 0, sizeof(struct mpx_bndreg_state));
 		mpx_state_buffer = get_xsave_addr(&vcpu->arch.guest_fpu->state.xsave,
-					XFEATURE_MASK_BNDCSR);
+					XFEATURE_BNDCSR);
 		if (mpx_state_buffer)
 			memset(mpx_state_buffer, 0, sizeof(struct mpx_bndcsr));
 		if (init_event)
diff --git a/arch/x86/mm/mpx.c b/arch/x86/mm/mpx.c
index c805db6236b47..59726aaf46713 100644
--- a/arch/x86/mm/mpx.c
+++ b/arch/x86/mm/mpx.c
@@ -142,7 +142,7 @@ int mpx_fault_info(struct mpx_fault_info *info, struct pt_regs *regs)
 		goto err_out;
 	}
 	/* get bndregs field from current task's xsave area */
-	bndregs = get_xsave_field_ptr(XFEATURE_MASK_BNDREGS);
+	bndregs = get_xsave_field_ptr(XFEATURE_BNDREGS);
 	if (!bndregs) {
 		err = -EINVAL;
 		goto err_out;
@@ -190,7 +190,7 @@ static __user void *mpx_get_bounds_dir(void)
 	 * The bounds directory pointer is stored in a register
 	 * only accessible if we first do an xsave.
 	 */
-	bndcsr = get_xsave_field_ptr(XFEATURE_MASK_BNDCSR);
+	bndcsr = get_xsave_field_ptr(XFEATURE_BNDCSR);
 	if (!bndcsr)
 		return MPX_INVALID_BOUNDS_DIR;
 
@@ -376,7 +376,7 @@ static int do_mpx_bt_fault(void)
 	const struct mpx_bndcsr *bndcsr;
 	struct mm_struct *mm = current->mm;
 
-	bndcsr = get_xsave_field_ptr(XFEATURE_MASK_BNDCSR);
+	bndcsr = get_xsave_field_ptr(XFEATURE_BNDCSR);
 	if (!bndcsr)
 		return -EINVAL;
 	/*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 12/24] x86/pkru: Provide .*_pkru_ins() functions
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (10 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 11/24] x86/fpu: Make get_xsave_field_ptr() and get_xsave_addr() " Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 13/24] x86/fpu: Only write PKRU if it is different from current Sebastian Andrzej Siewior
                   ` (11 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior, Dave Hansen

Dave Hansen has asked for __read_pkru() and __write_pkru() to be symmetrical.
As part of the series __write_pkru() will read back the value and only write it
if it is different.
In order to make both functions symmetrical move the function containing only
the opcode into a function with _isn() suffix. __write_pkru() will just invoke
__write_pkru_isn() but in a flowup patch will also read back the value.

Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/include/asm/pgtable.h       |  2 +-
 arch/x86/include/asm/special_insns.h | 12 +++++++++---
 arch/x86/kvm/vmx/vmx.c               |  2 +-
 3 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 2779ace16d23f..64333e5222cd9 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -127,7 +127,7 @@ static inline int pte_dirty(pte_t pte)
 static inline u32 read_pkru(void)
 {
 	if (boot_cpu_has(X86_FEATURE_OSPKE))
-		return __read_pkru();
+		return __read_pkru_ins();
 	return 0;
 }
 
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index 43c029cdc3fe8..27328606ff687 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -92,7 +92,7 @@ static inline void native_write_cr8(unsigned long val)
 #endif
 
 #ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
-static inline u32 __read_pkru(void)
+static inline u32 __read_pkru_ins(void)
 {
 	u32 ecx = 0;
 	u32 edx, pkru;
@@ -107,7 +107,7 @@ static inline u32 __read_pkru(void)
 	return pkru;
 }
 
-static inline void __write_pkru(u32 pkru)
+static inline void __write_pkru_ins(u32 pkru)
 {
 	u32 ecx = 0, edx = 0;
 
@@ -118,8 +118,14 @@ static inline void __write_pkru(u32 pkru)
 	asm volatile(".byte 0x0f,0x01,0xef\n\t"
 		     : : "a" (pkru), "c"(ecx), "d"(edx));
 }
+
+static inline void __write_pkru(u32 pkru)
+{
+	__write_pkru_ins(pkru);
+}
+
 #else
-static inline u32 __read_pkru(void)
+static inline u32 __read_pkru_ins(void)
 {
 	return 0;
 }
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index c73375e01ab8c..0753b3967423a 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -6514,7 +6514,7 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	 */
 	if (static_cpu_has(X86_FEATURE_PKU) &&
 	    kvm_read_cr4_bits(vcpu, X86_CR4_PKE)) {
-		vcpu->arch.pkru = __read_pkru();
+		vcpu->arch.pkru = __read_pkru_ins();
 		if (vcpu->arch.pkru != vmx->host_pkru)
 			__write_pkru(vmx->host_pkru);
 	}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 13/24] x86/fpu: Only write PKRU if it is different from current
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (11 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 12/24] x86/pkru: Provide .*_pkru_ins() functions Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 14/24] x86/pkeys: Don't check if PKRU is zero before writting it Sebastian Andrzej Siewior
                   ` (10 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

Dave Hansen says that the `wrpkru' is more expensive than `rdpkru'. It
has a higher cycle cost and it's also practically a (light) speculation
barrier.

As an optimisation read the current PKRU value and only write the new
one if it is different.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/include/asm/special_insns.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index 27328606ff687..28ffdf0c1add4 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -121,6 +121,12 @@ static inline void __write_pkru_ins(u32 pkru)
 
 static inline void __write_pkru(u32 pkru)
 {
+	/*
+	 * WRPKRU is relatively expensive compared to RDPKRU.
+	 * Avoid WRPKRU when it would not change the value.
+	 */
+	if (pkru == __read_pkru_ins())
+		return;
 	__write_pkru_ins(pkru);
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 14/24] x86/pkeys: Don't check if PKRU is zero before writting it
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (12 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 13/24] x86/fpu: Only write PKRU if it is different from current Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 15/24] x86/fpu: Eager switch PKRU state Sebastian Andrzej Siewior
                   ` (9 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

write_pkru() checks if the current value is the same as the expected
value. So instead just checking if the current and new value is zero
(and skip the write in such a case) we can benefit from that.

Remove the zero check of PKRU, write_pkru() provides a similar check.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/mm/pkeys.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/x86/mm/pkeys.c b/arch/x86/mm/pkeys.c
index 05bb9a44eb1c3..50f65fc1b9a3f 100644
--- a/arch/x86/mm/pkeys.c
+++ b/arch/x86/mm/pkeys.c
@@ -142,13 +142,6 @@ u32 init_pkru_value = PKRU_AD_KEY( 1) | PKRU_AD_KEY( 2) | PKRU_AD_KEY( 3) |
 void copy_init_pkru_to_fpregs(void)
 {
 	u32 init_pkru_value_snapshot = READ_ONCE(init_pkru_value);
-	/*
-	 * Any write to PKRU takes it out of the XSAVE 'init
-	 * state' which increases context switch cost.  Avoid
-	 * writing 0 when PKRU was already 0.
-	 */
-	if (!init_pkru_value_snapshot && !read_pkru())
-		return;
 	/*
 	 * Override the PKRU state that came from 'init_fpstate'
 	 * with the baseline from the process.
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 15/24] x86/fpu: Eager switch PKRU state
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (13 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 14/24] x86/pkeys: Don't check if PKRU is zero before writting it Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 16/24] x86/entry: Add TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
                   ` (8 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

From: Rik van Riel <riel@surriel.com>

While most of a task's FPU state is only needed in user space, the
protection keys need to be in place immediately after a context switch.

The reason is that any access to userspace memory while running in
kernel mode also need to abide by the memory permissions specified in
the protection keys.

The "eager switch" is a preparation for loading the FPU state on return
to userland. Instead of decoupling PKRU state from xstate I update PKRU
within xstate on write operations by the kernel.

The read/write_pkru() is moved to another header file so it can easily
accessed from pgtable.h and fpu/internal.h.

For user tasks we should always get the PKRU from the xsave area and it
should not change anything because the PKRU value was loaded as part of
FPU restore.
For kernel threads we now will have the default "init_pkru_value"
written. Before this commit the kernel thread would end up with a
random value which it inherited from the previous user task.

Signed-off-by: Rik van Riel <riel@surriel.com>
[bigeasy: save pkru to xstate, no cache, don't use __raw_xsave_addr()]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/include/asm/fpu/internal.h | 24 ++++++++++++++++++++++--
 arch/x86/include/asm/fpu/xstate.h   |  1 +
 arch/x86/include/asm/pgtable.h      |  6 ++++++
 arch/x86/mm/pkeys.c                 |  1 -
 4 files changed, 29 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 237ff8dc8559b..82ff84a4c4ab7 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -14,6 +14,7 @@
 #include <linux/compat.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/mm.h>
 
 #include <asm/user.h>
 #include <asm/fpu/api.h>
@@ -531,8 +532,27 @@ switch_fpu_prepare(struct fpu *old_fpu, int cpu)
  */
 static inline void switch_fpu_finish(struct fpu *new_fpu, int cpu)
 {
-	if (static_cpu_has(X86_FEATURE_FPU))
-		__fpregs_load_activate(new_fpu, cpu);
+	struct pkru_state *pk;
+	u32 pkru_val = init_pkru_value;
+
+	if (!static_cpu_has(X86_FEATURE_FPU))
+		return;
+
+	__fpregs_load_activate(new_fpu, cpu);
+
+	if (!cpu_feature_enabled(X86_FEATURE_OSPKE))
+		return;
+
+	/*
+	 * PKRU state is switched eagerly because it needs to be valid before we
+	 * return to userland e.g. for a copy_to_user() operation.
+	 */
+	if (current->mm) {
+		pk = get_xsave_addr(&new_fpu->state.xsave, XFEATURE_PKRU);
+		if (pk)
+			pkru_val = pk->pkru;
+	}
+	__write_pkru(pkru_val);
 }
 
 /*
diff --git a/arch/x86/include/asm/fpu/xstate.h b/arch/x86/include/asm/fpu/xstate.h
index fbe41f808e5d8..4e18a837223ff 100644
--- a/arch/x86/include/asm/fpu/xstate.h
+++ b/arch/x86/include/asm/fpu/xstate.h
@@ -5,6 +5,7 @@
 #include <linux/types.h>
 #include <asm/processor.h>
 #include <linux/uaccess.h>
+#include <asm/user.h>
 
 /* Bit 63 of XCR0 is reserved for future expansion */
 #define XFEATURE_MASK_EXTEND	(~(XFEATURE_MASK_FPSSE | (1ULL << 63)))
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 64333e5222cd9..1df90feeea5c6 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -1355,6 +1355,12 @@ static inline pmd_t pmd_swp_clear_soft_dirty(pmd_t pmd)
 #define PKRU_WD_BIT 0x2
 #define PKRU_BITS_PER_PKEY 2
 
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+extern u32 init_pkru_value;
+#else
+#define init_pkru_value	0
+#endif
+
 static inline bool __pkru_allows_read(u32 pkru, u16 pkey)
 {
 	int pkru_pkey_bits = pkey * PKRU_BITS_PER_PKEY;
diff --git a/arch/x86/mm/pkeys.c b/arch/x86/mm/pkeys.c
index 50f65fc1b9a3f..2ecbf4155f98f 100644
--- a/arch/x86/mm/pkeys.c
+++ b/arch/x86/mm/pkeys.c
@@ -126,7 +126,6 @@ int __arch_override_mprotect_pkey(struct vm_area_struct *vma, int prot, int pkey
  * in the process's lifetime will not accidentally get access
  * to data which is pkey-protected later on.
  */
-static
 u32 init_pkru_value = PKRU_AD_KEY( 1) | PKRU_AD_KEY( 2) | PKRU_AD_KEY( 3) |
 		      PKRU_AD_KEY( 4) | PKRU_AD_KEY( 5) | PKRU_AD_KEY( 6) |
 		      PKRU_AD_KEY( 7) | PKRU_AD_KEY( 8) | PKRU_AD_KEY( 9) |
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 16/24] x86/entry: Add TIF_NEED_FPU_LOAD
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (14 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 15/24] x86/fpu: Eager switch PKRU state Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 17/24] x86/fpu: Always store the registers in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
                   ` (7 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

Add TIF_NEED_FPU_LOAD. This is reserved for loading the FPU registers
before returning to userland. This flag must not be set for systems
without a FPU.
If this flag is cleared, the CPU's FPU register hold the current content
of current()'s FPU register. The in-memory copy (union fpregs_state) is
not valid.
If this flag is set, then all of CPU's FPU register may hold a random
value (except for PKRU) and it is required to load the content of the
FPU register on return to userland.

It is introduced now, so we can add code handling it now before adding
the main feature.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/include/asm/fpu/internal.h | 6 ++++++
 arch/x86/include/asm/thread_info.h  | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 82ff84a4c4ab7..b12874b7cf0cf 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -507,6 +507,12 @@ static inline void __fpregs_load_activate(struct fpu *fpu, int cpu)
  *
  * The FPU context is only stored/restore for user task and ->mm is used to
  * distinguish between kernel and user threads.
+ *
+ * If TIF_NEED_FPU_LOAD is cleared then the CPU's FPU registers are saved in
+ * the current thread's FPU registers state.
+ * If TIF_NEED_FPU_LOAD is set then CPU's FPU registers may not hold current()'s
+ * FPU registers. It is required to load the registers before returning to
+ * userland or using the content otherwise.
  */
 static inline void
 switch_fpu_prepare(struct fpu *old_fpu, int cpu)
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index e0eccbcb8447d..f9453536f9bbc 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -88,6 +88,7 @@ struct thread_info {
 #define TIF_USER_RETURN_NOTIFY	11	/* notify kernel of userspace return */
 #define TIF_UPROBE		12	/* breakpointed or singlestepping */
 #define TIF_PATCH_PENDING	13	/* pending live patching update */
+#define TIF_NEED_FPU_LOAD	14	/* load FPU on return to userspace */
 #define TIF_NOCPUID		15	/* CPUID is not accessible in userland */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_IA32		17	/* IA32 compatibility process */
@@ -117,6 +118,7 @@ struct thread_info {
 #define _TIF_USER_RETURN_NOTIFY	(1 << TIF_USER_RETURN_NOTIFY)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_PATCH_PENDING	(1 << TIF_PATCH_PENDING)
+#define _TIF_NEED_FPU_LOAD	(1 << TIF_NEED_FPU_LOAD)
 #define _TIF_NOCPUID		(1 << TIF_NOCPUID)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_IA32		(1 << TIF_IA32)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 17/24] x86/fpu: Always store the registers in copy_fpstate_to_sigframe()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (15 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 16/24] x86/entry: Add TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-31 16:54   ` Thomas Gleixner
  2019-03-21 20:26 ` [PATCH 18/24] x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
                   ` (6 subsequent siblings)
  23 siblings, 1 reply; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

From: Rik van Riel <riel@surriel.com>

copy_fpstate_to_sigframe() stores the registers directly to user space.
This is okay because the FPU register are valid and saving it directly
avoids saving it into kernel memory and making a copy.
However… We can't keep doing this if we are going to restore the FPU
registers on the return to userland. It is possible that the FPU
registers will be invalidated in the middle of the save operation and
this should be done with disabled preemption / BH.

Save the FPU registers to task's FPU struct and copy them to the user
memory later on.

This code is extracted from an earlier version of the patchset while
there still was lazy-FPU on x86.

Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/include/asm/fpu/internal.h | 43 -----------------------------
 arch/x86/kernel/fpu/signal.c        | 34 +++++++++--------------
 2 files changed, 13 insertions(+), 64 deletions(-)

diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index b12874b7cf0cf..18f78be133f3a 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -127,20 +127,6 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);
 		     _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_fprestore)	\
 		     : output : input)
 
-static inline int copy_fregs_to_user(struct fregs_state __user *fx)
-{
-	return user_insn(fnsave %[fx]; fwait,  [fx] "=m" (*fx), "m" (*fx));
-}
-
-static inline int copy_fxregs_to_user(struct fxregs_state __user *fx)
-{
-	if (IS_ENABLED(CONFIG_X86_32))
-		return user_insn(fxsave %[fx], [fx] "=m" (*fx), "m" (*fx));
-	else
-		return user_insn(fxsaveq %[fx], [fx] "=m" (*fx), "m" (*fx));
-
-}
-
 static inline void copy_kernel_to_fxregs(struct fxregs_state *fx)
 {
 	if (IS_ENABLED(CONFIG_X86_32))
@@ -315,35 +301,6 @@ static inline void copy_kernel_to_xregs(struct xregs_state *xstate, u64 mask)
 	XSTATE_XRESTORE(xstate, lmask, hmask);
 }
 
-/*
- * Save xstate to user space xsave area.
- *
- * We don't use modified optimization because xrstor/xrstors might track
- * a different application.
- *
- * We don't use compacted format xsave area for
- * backward compatibility for old applications which don't understand
- * compacted format of xsave area.
- */
-static inline int copy_xregs_to_user(struct xregs_state __user *buf)
-{
-	int err;
-
-	/*
-	 * Clear the xsave header first, so that reserved fields are
-	 * initialized to zero.
-	 */
-	err = __clear_user(&buf->header, sizeof(buf->header));
-	if (unlikely(err))
-		return -EFAULT;
-
-	stac();
-	XSTATE_OP(XSAVE, buf, -1, -1, err);
-	clac();
-
-	return err;
-}
-
 /*
  * Restore xstate from user space xsave area.
  */
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 6475320939ce3..f55f16d9e7e4e 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -118,22 +118,6 @@ static inline int save_xstate_epilog(void __user *buf, int ia32_frame)
 	return err;
 }
 
-static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf)
-{
-	int err;
-
-	if (use_xsave())
-		err = copy_xregs_to_user(buf);
-	else if (use_fxsr())
-		err = copy_fxregs_to_user((struct fxregs_state __user *) buf);
-	else
-		err = copy_fregs_to_user((struct fregs_state __user *) buf);
-
-	if (unlikely(err) && __clear_user(buf, fpu_user_xstate_size))
-		err = -EFAULT;
-	return err;
-}
-
 /*
  * Save the fpu, extended register state to the user signal frame.
  *
@@ -144,8 +128,8 @@ static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf)
  *	buf == buf_fx for 64-bit frames and 32-bit fsave frame.
  *	buf != buf_fx for 32-bit frames with fxstate.
  *
- * Save the state directly to the user frame pointed by the aligned pointer
- * 'buf_fx'.
+ * Save the state to task's fpu->state and then copy it to the user frame
+ * pointed by the aligned pointer 'buf_fx'.
  *
  * If this is a 32-bit frame with fxstate, put a fsave header before
  * the aligned state at 'buf_fx'.
@@ -155,6 +139,8 @@ static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf)
  */
 int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 {
+	struct fpu *fpu = &current->thread.fpu;
+	struct xregs_state *xsave = &fpu->state.xsave;
 	struct task_struct *tsk = current;
 	int ia32_fxstate = (buf != buf_fx);
 
@@ -169,9 +155,15 @@ int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 			sizeof(struct user_i387_ia32_struct), NULL,
 			(struct _fpstate_32 __user *) buf) ? -1 : 1;
 
-	/* Save the live register state to the user directly. */
-	if (copy_fpregs_to_sigframe(buf_fx))
-		return -1;
+	copy_fpregs_to_fpstate(fpu);
+
+	if (using_compacted_format()) {
+		copy_xstate_to_user(buf_fx, xsave, 0, size);
+	} else {
+		fpstate_sanitize_xstate(fpu);
+		if (__copy_to_user(buf_fx, xsave, fpu_user_xstate_size))
+			return -1;
+	}
 
 	/* Save the fsave header for the 32-bit frames. */
 	if ((ia32_fxstate || !use_fxsr()) && save_fsave_header(tsk, buf))
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 18/24] x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (16 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 17/24] x86/fpu: Always store the registers in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-31 18:20   ` Thomas Gleixner
  2019-03-21 20:26 ` [PATCH 19/24] x86/fpu: Update xstate's PKRU value on write_pkru() Sebastian Andrzej Siewior
                   ` (5 subsequent siblings)
  23 siblings, 1 reply; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

From: Rik van Riel <riel@surriel.com>

The FPU registers need only to be saved if TIF_NEED_FPU_LOAD is not set.
Otherwise this has been already done and can be skipped.

Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/kernel/fpu/signal.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index f55f16d9e7e4e..97ea6909ede1f 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -155,7 +155,16 @@ int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 			sizeof(struct user_i387_ia32_struct), NULL,
 			(struct _fpstate_32 __user *) buf) ? -1 : 1;
 
-	copy_fpregs_to_fpstate(fpu);
+	fpregs_lock();
+	/*
+	 * If we do not need to load the FPU registers at return to userspace
+	 * then the CPU has the current state and we need to save it. Otherwise
+	 * it is already done and we can skip it.
+	 */
+	if (!test_thread_flag(TIF_NEED_FPU_LOAD))
+		copy_fpregs_to_fpstate(fpu);
+
+	fpregs_unlock();
 
 	if (using_compacted_format()) {
 		copy_xstate_to_user(buf_fx, xsave, 0, size);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 19/24] x86/fpu: Update xstate's PKRU value on write_pkru()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (17 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 18/24] x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 20/24] x86/fpu: Inline copy_user_to_fpregs_zeroing() Sebastian Andrzej Siewior
                   ` (4 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

During the context switch the xstate is loaded which also includes the
PKRU value.
If xstate is restored on return to userland it is required that the
PKRU value in xstate is the same as the one in the CPU.

Save the PKRU in xstate during modification.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/include/asm/pgtable.h | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 1df90feeea5c6..58a3a68e1f114 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -23,6 +23,8 @@
 
 #ifndef __ASSEMBLY__
 #include <asm/x86_init.h>
+#include <asm/fpu/xstate.h>
+#include <asm/fpu/api.h>
 
 extern pgd_t early_top_pgt[PTRS_PER_PGD];
 int __init __early_make_pgtable(unsigned long address, pmdval_t pmd);
@@ -133,8 +135,22 @@ static inline u32 read_pkru(void)
 
 static inline void write_pkru(u32 pkru)
 {
-	if (boot_cpu_has(X86_FEATURE_OSPKE))
-		__write_pkru(pkru);
+	struct pkru_state *pk;
+
+	if (!boot_cpu_has(X86_FEATURE_OSPKE))
+		return;
+
+	pk = get_xsave_addr(&current->thread.fpu.state.xsave, XFEATURE_PKRU);
+	/*
+	 * The PKRU value in xstate needs to be in sync with the value that is
+	 * written to the CPU. The FPU restore on return to userland would
+	 * otherwise load the previous value again.
+	 */
+	fpregs_lock();
+	if (pk)
+		pk->pkru = pkru;
+	__write_pkru(pkru);
+	fpregs_unlock();
 }
 
 static inline int pte_young(pte_t pte)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 20/24] x86/fpu: Inline copy_user_to_fpregs_zeroing()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (18 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 19/24] x86/fpu: Update xstate's PKRU value on write_pkru() Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 21/24] x86/fpu: Let __fpu__restore_sig() restore the !32bit+fxsr frame from kernel memory Sebastian Andrzej Siewior
                   ` (3 subsequent siblings)
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

Start refactoring __fpu__restore_sig() by inlining
copy_user_to_fpregs_zeroing().

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/kernel/fpu/signal.c | 42 ++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 23 deletions(-)

diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 97ea6909ede1f..5a467a381245c 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -220,28 +220,6 @@ sanitize_restored_xstate(union fpregs_state *state,
 	}
 }
 
-/*
- * Restore the extended state if present. Otherwise, restore the FP/SSE state.
- */
-static inline int copy_user_to_fpregs_zeroing(void __user *buf, u64 xbv, int fx_only)
-{
-	if (use_xsave()) {
-		if ((unsigned long)buf % 64 || fx_only) {
-			u64 init_bv = xfeatures_mask & ~XFEATURE_MASK_FPSSE;
-			copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
-			return copy_user_to_fxregs(buf);
-		} else {
-			u64 init_bv = xfeatures_mask & ~xbv;
-			if (unlikely(init_bv))
-				copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
-			return copy_user_to_xregs(buf, xbv);
-		}
-	} else if (use_fxsr()) {
-		return copy_user_to_fxregs(buf);
-	} else
-		return copy_user_to_fregs(buf);
-}
-
 static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 {
 	int ia32_fxstate = (buf != buf_fx);
@@ -319,11 +297,29 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		kfree(tmp);
 		return err;
 	} else {
+		int ret;
+
 		/*
 		 * For 64-bit frames and 32-bit fsave frames, restore the user
 		 * state to the registers directly (with exceptions handled).
 		 */
-		if (copy_user_to_fpregs_zeroing(buf_fx, xfeatures, fx_only)) {
+		if (use_xsave()) {
+			if ((unsigned long)buf_fx % 64 || fx_only) {
+				u64 init_bv = xfeatures_mask & ~XFEATURE_MASK_FPSSE;
+				copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
+				ret = copy_user_to_fxregs(buf_fx);
+			} else {
+				u64 init_bv = xfeatures_mask & ~xfeatures;
+				if (unlikely(init_bv))
+					copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
+				ret = copy_user_to_xregs(buf_fx, xfeatures);
+			}
+		} else if (use_fxsr()) {
+			ret = copy_user_to_fxregs(buf_fx);
+		} else
+			ret = copy_user_to_fregs(buf_fx);
+
+		if (ret) {
 			fpu__clear(fpu);
 			return -1;
 		}
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 21/24] x86/fpu: Let __fpu__restore_sig() restore the !32bit+fxsr frame from kernel memory
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (19 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 20/24] x86/fpu: Inline copy_user_to_fpregs_zeroing() Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-22 14:55   ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 22/24] x86/fpu: Merge the two code paths in __fpu__restore_sig() Sebastian Andrzej Siewior
                   ` (2 subsequent siblings)
  23 siblings, 1 reply; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

The !32bit+fxsr case loads the new state from user memory. In case we
restore the FPU state on return to userland we can't do this. It would
be required to disable preemption in order to avoid a context switch
which would set TIF_NEED_FPU_LOAD. If this happens before the "restore"
operation then the loaded registers would become volatile.

Disabling preemption while accessing user memory requires to disable the
pagefault handler. An error during XRSTOR would then mean that either a
page fault occured (and we have to retry with enabled page fault
handler) or a #GP occured because the xstate is bogus (after all the
sig-handler can modify it).

In order to avoid that mess, copy the FPU state from userland, validate
it and then load it. The copy_users_…() helper are basically the old
helper except that they operate on kernel memory and the fault handler
just sets the error value and the caller handles it.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/include/asm/fpu/internal.h | 33 ++++++++++-----
 arch/x86/kernel/fpu/signal.c        | 62 +++++++++++++++++++++++------
 2 files changed, 72 insertions(+), 23 deletions(-)

diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 18f78be133f3a..1d0e59c8f920e 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -121,6 +121,21 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);
 	err;								\
 })
 
+#define kernel_insn_norestore(insn, output, input...)			\
+({									\
+	int err;							\
+	asm volatile("1:" #insn "\n\t"					\
+		     "2:\n"						\
+		     ".section .fixup,\"ax\"\n"				\
+		     "3:  movl $-1,%[err]\n"				\
+		     "    jmp  2b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE(1b, 3b)				\
+		     : [err] "=r" (err), output				\
+		     : "0"(0), input);					\
+	err;								\
+})
+
 #define kernel_insn(insn, output, input...)				\
 	asm volatile("1:" #insn "\n\t"					\
 		     "2:\n"						\
@@ -135,12 +150,12 @@ static inline void copy_kernel_to_fxregs(struct fxregs_state *fx)
 		kernel_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
 }
 
-static inline int copy_user_to_fxregs(struct fxregs_state __user *fx)
+static inline int copy_users_to_fxregs(struct fxregs_state *fx)
 {
 	if (IS_ENABLED(CONFIG_X86_32))
-		return user_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
+		return kernel_insn_norestore(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 	else
-		return user_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
+		return kernel_insn_norestore(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
 }
 
 static inline void copy_kernel_to_fregs(struct fregs_state *fx)
@@ -148,9 +163,9 @@ static inline void copy_kernel_to_fregs(struct fregs_state *fx)
 	kernel_insn(frstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 }
 
-static inline int copy_user_to_fregs(struct fregs_state __user *fx)
+static inline int copy_users_to_fregs(struct fregs_state *fx)
 {
-	return user_insn(frstor %[fx], "=m" (*fx), [fx] "m" (*fx));
+	return kernel_insn_norestore(frstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 }
 
 static inline void copy_fxregs_to_kernel(struct fpu *fpu)
@@ -302,18 +317,16 @@ static inline void copy_kernel_to_xregs(struct xregs_state *xstate, u64 mask)
 }
 
 /*
- * Restore xstate from user space xsave area.
+ * Restore xstate from kernel space xsave area, return an error code instead an
+ * exception.
  */
-static inline int copy_user_to_xregs(struct xregs_state __user *buf, u64 mask)
+static inline int copy_users_to_xregs(struct xregs_state *xstate, u64 mask)
 {
-	struct xregs_state *xstate = ((__force struct xregs_state *)buf);
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
 	int err;
 
-	stac();
 	XSTATE_OP(XRSTOR, xstate, lmask, hmask, err);
-	clac();
 
 	return err;
 }
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 5a467a381245c..052a16c96218f 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -216,7 +216,8 @@ sanitize_restored_xstate(union fpregs_state *state,
 		 */
 		xsave->i387.mxcsr &= mxcsr_feature_mask;
 
-		convert_to_fxsr(&state->fxsave, ia32_env);
+		if (ia32_env)
+			convert_to_fxsr(&state->fxsave, ia32_env);
 	}
 }
 
@@ -297,28 +298,63 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		kfree(tmp);
 		return err;
 	} else {
+		union fpregs_state *state;
+		void *tmp;
 		int ret;
 
+		tmp = kzalloc(sizeof(*state) + fpu_kernel_xstate_size + 64, GFP_KERNEL);
+		if (!tmp)
+			return -ENOMEM;
+		state = PTR_ALIGN(tmp, 64);
+
 		/*
 		 * For 64-bit frames and 32-bit fsave frames, restore the user
 		 * state to the registers directly (with exceptions handled).
 		 */
-		if (use_xsave()) {
-			if ((unsigned long)buf_fx % 64 || fx_only) {
+		if ((unsigned long)buf_fx % 64)
+			fx_only = 1;
+
+		if (use_xsave() && !fx_only) {
+			u64 init_bv = xfeatures_mask & ~xfeatures;
+
+			if (using_compacted_format()) {
+				ret = copy_user_to_xstate(&state->xsave, buf_fx);
+			} else {
+				ret = __copy_from_user(&state->xsave, buf_fx, state_size);
+
+				if (!ret && state_size > offsetof(struct xregs_state, header))
+					ret = validate_xstate_header(&state->xsave.header);
+			}
+			if (ret)
+				goto err_out;
+			sanitize_restored_xstate(state, NULL, xfeatures,
+						 fx_only);
+
+			if (unlikely(init_bv))
+				copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
+			ret = copy_users_to_xregs(&state->xsave, xfeatures);
+
+		} else if (use_fxsr()) {
+			ret = __copy_from_user(&state->fxsave, buf_fx, state_size);
+			if (ret)
+				goto err_out;
+
+			if (use_xsave()) {
 				u64 init_bv = xfeatures_mask & ~XFEATURE_MASK_FPSSE;
 				copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
-				ret = copy_user_to_fxregs(buf_fx);
-			} else {
-				u64 init_bv = xfeatures_mask & ~xfeatures;
-				if (unlikely(init_bv))
-					copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
-				ret = copy_user_to_xregs(buf_fx, xfeatures);
 			}
-		} else if (use_fxsr()) {
-			ret = copy_user_to_fxregs(buf_fx);
-		} else
-			ret = copy_user_to_fregs(buf_fx);
+			state->fxsave.mxcsr &= mxcsr_feature_mask;
 
+			ret = copy_users_to_fxregs(&state->fxsave);
+		} else {
+			ret = __copy_from_user(&state->fsave, buf_fx, state_size);
+			if (ret)
+				goto err_out;
+			ret = copy_users_to_fregs(buf_fx);
+		}
+
+err_out:
+		kfree(tmp);
 		if (ret) {
 			fpu__clear(fpu);
 			return -1;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 22/24] x86/fpu: Merge the two code paths in __fpu__restore_sig()
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (20 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 21/24] x86/fpu: Let __fpu__restore_sig() restore the !32bit+fxsr frame from kernel memory Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 23/24] x86/fpu: Defer FPU state load until return to userspace Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 24/24] x86/pkeys: add PKRU value to init_fpstate Sebastian Andrzej Siewior
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

The ia32_fxstate case (32bit with fxsr) and the other (64bit, 32bit
without fxsr) restore both from kernel memory and sanitize the content.
The !ia32_fxstate version restores missing xstates from "init state"
while the ia32_fxstate doesn't and skips it.

Merge the two code paths and keep the !ia32_fxstate version. Copy only
the user_i387_ia32_struct data structure in the ia32_fxstate.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/kernel/fpu/signal.c | 146 ++++++++++++++---------------------
 1 file changed, 57 insertions(+), 89 deletions(-)

diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 052a16c96218f..5f8ce0285f641 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -223,12 +223,17 @@ sanitize_restored_xstate(union fpregs_state *state,
 
 static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 {
+	struct user_i387_ia32_struct *envp = NULL;
 	int ia32_fxstate = (buf != buf_fx);
 	struct task_struct *tsk = current;
 	struct fpu *fpu = &tsk->thread.fpu;
 	int state_size = fpu_kernel_xstate_size;
+	struct user_i387_ia32_struct env;
+	union fpregs_state *state;
 	u64 xfeatures = 0;
 	int fx_only = 0;
+	int ret = 0;
+	void *tmp;
 
 	ia32_fxstate &= (IS_ENABLED(CONFIG_X86_32) ||
 			 IS_ENABLED(CONFIG_IA32_EMULATION));
@@ -263,105 +268,68 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		}
 	}
 
-	if (ia32_fxstate) {
-		/*
-		 * For 32-bit frames with fxstate, copy the user state to the
-		 * thread's fpu state, reconstruct fxstate from the fsave
-		 * header. Validate and sanitize the copied state.
-		 */
-		struct user_i387_ia32_struct env;
-		union fpregs_state *state;
-		int err = 0;
-		void *tmp;
+	tmp = kzalloc(sizeof(*state) + fpu_kernel_xstate_size + 64, GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+	state = PTR_ALIGN(tmp, 64);
 
-		tmp = kzalloc(sizeof(*state) + fpu_kernel_xstate_size + 64, GFP_KERNEL);
-		if (!tmp)
-			return -ENOMEM;
-		state = PTR_ALIGN(tmp, 64);
+	if ((unsigned long)buf_fx % 64)
+		fx_only = 1;
+
+	/*
+	 * For 32-bit frames with fxstate, copy the fxstate so it can be
+	 * reconstructed later.
+	 */
+	if (ia32_fxstate) {
+		ret = __copy_from_user(&env, buf, sizeof(env));
+		if (ret)
+			goto err_out;
+		envp = &env;
+	}
+	if (use_xsave() && !fx_only) {
+		u64 init_bv = xfeatures_mask & ~xfeatures;
 
 		if (using_compacted_format()) {
-			err = copy_user_to_xstate(&state->xsave, buf_fx);
+			ret = copy_user_to_xstate(&state->xsave, buf_fx);
 		} else {
-			err = __copy_from_user(&state->xsave, buf_fx, state_size);
+			ret = __copy_from_user(&state->xsave, buf_fx, state_size);
 
-			if (!err && state_size > offsetof(struct xregs_state, header))
-				err = validate_xstate_header(&state->xsave.header);
+			if (!ret && state_size > offsetof(struct xregs_state, header))
+				ret = validate_xstate_header(&state->xsave.header);
+		}
+		if (ret)
+			goto err_out;
+
+		sanitize_restored_xstate(state, envp, xfeatures, fx_only);
+
+		if (unlikely(init_bv))
+			copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
+		ret = copy_users_to_xregs(&state->xsave, xfeatures);
+
+	} else if (use_fxsr()) {
+		ret = __copy_from_user(&state->fxsave, buf_fx, state_size);
+		if (ret)
+			goto err_out;
+
+		sanitize_restored_xstate(state, envp, xfeatures, fx_only);
+		if (use_xsave()) {
+			u64 init_bv = xfeatures_mask & ~XFEATURE_MASK_FPSSE;
+			copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
 		}
 
-		if (err || __copy_from_user(&env, buf, sizeof(env))) {
-			err = -1;
-		} else {
-			sanitize_restored_xstate(state, &env, xfeatures, fx_only);
-			copy_kernel_to_fpregs(state);
-		}
-
-		kfree(tmp);
-		return err;
+		ret = copy_users_to_fxregs(&state->fxsave);
 	} else {
-		union fpregs_state *state;
-		void *tmp;
-		int ret;
-
-		tmp = kzalloc(sizeof(*state) + fpu_kernel_xstate_size + 64, GFP_KERNEL);
-		if (!tmp)
-			return -ENOMEM;
-		state = PTR_ALIGN(tmp, 64);
-
-		/*
-		 * For 64-bit frames and 32-bit fsave frames, restore the user
-		 * state to the registers directly (with exceptions handled).
-		 */
-		if ((unsigned long)buf_fx % 64)
-			fx_only = 1;
-
-		if (use_xsave() && !fx_only) {
-			u64 init_bv = xfeatures_mask & ~xfeatures;
-
-			if (using_compacted_format()) {
-				ret = copy_user_to_xstate(&state->xsave, buf_fx);
-			} else {
-				ret = __copy_from_user(&state->xsave, buf_fx, state_size);
-
-				if (!ret && state_size > offsetof(struct xregs_state, header))
-					ret = validate_xstate_header(&state->xsave.header);
-			}
-			if (ret)
-				goto err_out;
-			sanitize_restored_xstate(state, NULL, xfeatures,
-						 fx_only);
-
-			if (unlikely(init_bv))
-				copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
-			ret = copy_users_to_xregs(&state->xsave, xfeatures);
-
-		} else if (use_fxsr()) {
-			ret = __copy_from_user(&state->fxsave, buf_fx, state_size);
-			if (ret)
-				goto err_out;
-
-			if (use_xsave()) {
-				u64 init_bv = xfeatures_mask & ~XFEATURE_MASK_FPSSE;
-				copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
-			}
-			state->fxsave.mxcsr &= mxcsr_feature_mask;
-
-			ret = copy_users_to_fxregs(&state->fxsave);
-		} else {
-			ret = __copy_from_user(&state->fsave, buf_fx, state_size);
-			if (ret)
-				goto err_out;
-			ret = copy_users_to_fregs(buf_fx);
-		}
-
-err_out:
-		kfree(tmp);
-		if (ret) {
-			fpu__clear(fpu);
-			return -1;
-		}
+		ret = __copy_from_user(&state->fsave, buf_fx, state_size);
+		if (ret)
+			goto err_out;
+		ret = copy_users_to_fregs(buf_fx);
 	}
 
-	return 0;
+err_out:
+	kfree(tmp);
+	if (ret)
+		fpu__clear(fpu);
+	return ret;
 }
 
 static inline int xstate_sigframe_size(void)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 23/24] x86/fpu: Defer FPU state load until return to userspace
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (21 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 22/24] x86/fpu: Merge the two code paths in __fpu__restore_sig() Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  2019-03-21 20:26 ` [PATCH 24/24] x86/pkeys: add PKRU value to init_fpstate Sebastian Andrzej Siewior
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

From: Rik van Riel <riel@surriel.com>

Defer loading of FPU state until return to userspace. This gives
the kernel the potential to skip loading FPU state for tasks that
stay in kernel mode, or for tasks that end up with repeated
invocations of kernel_fpu_begin() & kernel_fpu_end().

The __fpregs_changes_{begin|end}() section ensures that the register
remain unchanged. Otherwise a context switch or a BH could save the
registers to its FPU context and processor's FPU register would became
random if beeing modified at the same time.

KVM swaps the host/guest register on entry/exit path. I kept the flow as
is. First it ensures that the registers are loaded and then saves the
current (host) state before it loads the guest's register. The swap is
done at the very end with disabled interrupts so it should not change
anymore before theg guest is entered. The read/save version seems to be
cheaper compared to memcpy() in a micro benchmark.

Each thread gets TIF_NEED_FPU_LOAD set as part of fork() / fpu__copy().
For kernel threads, this flag gets never cleared which avoids saving /
restoring the FPU state for kernel threads and during in-kernel usage of
the FPU register.

Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/entry/common.c             |   8 +++
 arch/x86/include/asm/fpu/api.h      |  22 +++++-
 arch/x86/include/asm/fpu/internal.h |  27 ++++---
 arch/x86/include/asm/trace/fpu.h    |   5 +-
 arch/x86/kernel/fpu/core.c          | 105 +++++++++++++++++++++-------
 arch/x86/kernel/fpu/signal.c        |  46 +++++++-----
 arch/x86/kernel/process.c           |   2 +-
 arch/x86/kernel/process_32.c        |   5 +-
 arch/x86/kernel/process_64.c        |   5 +-
 arch/x86/kvm/x86.c                  |  20 ++++--
 10 files changed, 180 insertions(+), 65 deletions(-)

diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index 7bc105f47d21a..13e8e29af6ab7 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -31,6 +31,7 @@
 #include <asm/vdso.h>
 #include <linux/uaccess.h>
 #include <asm/cpufeature.h>
+#include <asm/fpu/api.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
@@ -196,6 +197,13 @@ __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
 	if (unlikely(cached_flags & EXIT_TO_USERMODE_LOOP_FLAGS))
 		exit_to_usermode_loop(regs, cached_flags);
 
+	/* Reload ti->flags; we may have rescheduled above. */
+	cached_flags = READ_ONCE(ti->flags);
+
+	fpregs_assert_state_consistent();
+	if (unlikely(cached_flags & _TIF_NEED_FPU_LOAD))
+		switch_fpu_return();
+
 #ifdef CONFIG_COMPAT
 	/*
 	 * Compat syscalls set TS_COMPAT.  Make sure we clear it before
diff --git a/arch/x86/include/asm/fpu/api.h b/arch/x86/include/asm/fpu/api.h
index 73e684160f354..fc3dd044e16dd 100644
--- a/arch/x86/include/asm/fpu/api.h
+++ b/arch/x86/include/asm/fpu/api.h
@@ -10,7 +10,7 @@
 
 #ifndef _ASM_X86_FPU_API_H
 #define _ASM_X86_FPU_API_H
-#include <linux/preempt.h>
+#include <linux/bottom_half.h>
 
 /*
  * Use kernel_fpu_begin/end() if you intend to use FPU in kernel context. It
@@ -22,17 +22,37 @@
 extern void kernel_fpu_begin(void);
 extern void kernel_fpu_end(void);
 extern bool irq_fpu_usable(void);
+extern void fpregs_mark_activate(void);
 
+/*
+ * Use fpregs_lock() while editing CPU's FPU registers or fpu->state.
+ * A context switch will (and softirq might) save CPU's FPU register to
+ * fpu->state and set TIF_NEED_FPU_LOAD leaving CPU's FPU registers in a random
+ * state.
+ */
 static inline void fpregs_lock(void)
 {
 	preempt_disable();
+	local_bh_disable();
 }
 
 static inline void fpregs_unlock(void)
 {
+	local_bh_enable();
 	preempt_enable();
 }
 
+#ifdef CONFIG_X86_DEBUG_FPU
+extern void fpregs_assert_state_consistent(void);
+#else
+static inline void fpregs_assert_state_consistent(void) { }
+#endif
+
+/*
+ * Load the task FPU state before returning to userspace.
+ */
+extern void switch_fpu_return(void);
+
 /*
  * Query the presence of one or more xfeatures. Works on any legacy CPU as well.
  *
diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 1d0e59c8f920e..43465eea4dc54 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -30,7 +30,7 @@ extern void fpu__prepare_write(struct fpu *fpu);
 extern void fpu__save(struct fpu *fpu);
 extern int  fpu__restore_sig(void __user *buf, int ia32_frame);
 extern void fpu__drop(struct fpu *fpu);
-extern int  fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu);
+extern int  fpu__copy(struct task_struct *dst, struct task_struct *src);
 extern void fpu__clear(struct fpu *fpu);
 extern int  fpu__exception_code(struct fpu *fpu, int trap_nr);
 extern int  dump_fpu(struct pt_regs *ptregs, struct user_i387_struct *fpstate);
@@ -455,13 +455,20 @@ static inline void fpregs_activate(struct fpu *fpu)
 	trace_x86_fpu_regs_activated(fpu);
 }
 
-static inline void __fpregs_load_activate(struct fpu *fpu, int cpu)
+static inline void __fpregs_load_activate(void)
 {
+	struct fpu *fpu = &current->thread.fpu;
+	int cpu = smp_processor_id();
+
+	if (WARN_ON_ONCE(current->mm == NULL))
+		return;
+
 	if (!fpregs_state_valid(fpu, cpu)) {
-		if (current->mm)
-			copy_kernel_to_fpregs(&fpu->state);
+		copy_kernel_to_fpregs(&fpu->state);
 		fpregs_activate(fpu);
+		fpu->last_cpu = cpu;
 	}
+	clear_thread_flag(TIF_NEED_FPU_LOAD);
 }
 
 /*
@@ -472,8 +479,8 @@ static inline void __fpregs_load_activate(struct fpu *fpu, int cpu)
  *  - switch_fpu_prepare() saves the old state.
  *    This is done within the context of the old process.
  *
- *  - switch_fpu_finish() restores the new state as
- *    necessary.
+ *  - switch_fpu_finish() sets TIF_NEED_FPU_LOAD; the floating point state
+ *    will get loaded on return to userspace, or when the kernel needs it.
  *
  * The FPU context is only stored/restore for user task and ->mm is used to
  * distinguish between kernel and user threads.
@@ -503,10 +510,10 @@ switch_fpu_prepare(struct fpu *old_fpu, int cpu)
  */
 
 /*
- * Set up the userspace FPU context for the new task, if the task
- * has used the FPU.
+ * Load PKRU from the FPU context if available. Delay loading the loading of the
+ * complete FPU state until the return to userland.
  */
-static inline void switch_fpu_finish(struct fpu *new_fpu, int cpu)
+static inline void switch_fpu_finish(struct fpu *new_fpu)
 {
 	struct pkru_state *pk;
 	u32 pkru_val = init_pkru_value;
@@ -514,7 +521,7 @@ static inline void switch_fpu_finish(struct fpu *new_fpu, int cpu)
 	if (!static_cpu_has(X86_FEATURE_FPU))
 		return;
 
-	__fpregs_load_activate(new_fpu, cpu);
+	set_thread_flag(TIF_NEED_FPU_LOAD);
 
 	if (!cpu_feature_enabled(X86_FEATURE_OSPKE))
 		return;
diff --git a/arch/x86/include/asm/trace/fpu.h b/arch/x86/include/asm/trace/fpu.h
index bd65f6ba950f8..91a1422091ceb 100644
--- a/arch/x86/include/asm/trace/fpu.h
+++ b/arch/x86/include/asm/trace/fpu.h
@@ -13,19 +13,22 @@ DECLARE_EVENT_CLASS(x86_fpu,
 
 	TP_STRUCT__entry(
 		__field(struct fpu *, fpu)
+		__field(bool, load_fpu)
 		__field(u64, xfeatures)
 		__field(u64, xcomp_bv)
 		),
 
 	TP_fast_assign(
 		__entry->fpu		= fpu;
+		__entry->load_fpu	= test_thread_flag(TIF_NEED_FPU_LOAD);
 		if (boot_cpu_has(X86_FEATURE_OSXSAVE)) {
 			__entry->xfeatures = fpu->state.xsave.header.xfeatures;
 			__entry->xcomp_bv  = fpu->state.xsave.header.xcomp_bv;
 		}
 	),
-	TP_printk("x86/fpu: %p xfeatures: %llx xcomp_bv: %llx",
+	TP_printk("x86/fpu: %p load: %d xfeatures: %llx xcomp_bv: %llx",
 			__entry->fpu,
+			__entry->load_fpu,
 			__entry->xfeatures,
 			__entry->xcomp_bv
 	)
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 739ca3ae2bdcd..7d68404a88d52 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -102,23 +102,20 @@ static void __kernel_fpu_begin(void)
 	kernel_fpu_disable();
 
 	if (current->mm) {
-		/*
-		 * Ignore return value -- we don't care if reg state
-		 * is clobbered.
-		 */
-		copy_fpregs_to_fpstate(fpu);
-	} else {
-		__cpu_invalidate_fpregs_state();
+		if (!test_thread_flag(TIF_NEED_FPU_LOAD)) {
+			set_thread_flag(TIF_NEED_FPU_LOAD);
+			/*
+			 * Ignore return value -- we don't care if reg state
+			 * is clobbered.
+			 */
+			copy_fpregs_to_fpstate(fpu);
+		}
 	}
+	__cpu_invalidate_fpregs_state();
 }
 
 static void __kernel_fpu_end(void)
 {
-	struct fpu *fpu = &current->thread.fpu;
-
-	if (current->mm)
-		copy_kernel_to_fpregs(&fpu->state);
-
 	kernel_fpu_enable();
 }
 
@@ -145,14 +142,17 @@ void fpu__save(struct fpu *fpu)
 {
 	WARN_ON_FPU(fpu != &current->thread.fpu);
 
-	preempt_disable();
+	fpregs_lock();
 	trace_x86_fpu_before_save(fpu);
 
-	if (!copy_fpregs_to_fpstate(fpu))
-		copy_kernel_to_fpregs(&fpu->state);
+	if (!test_thread_flag(TIF_NEED_FPU_LOAD)) {
+		if (!copy_fpregs_to_fpstate(fpu)) {
+			copy_kernel_to_fpregs(&fpu->state);
+		}
+	}
 
 	trace_x86_fpu_after_save(fpu);
-	preempt_enable();
+	fpregs_unlock();
 }
 EXPORT_SYMBOL_GPL(fpu__save);
 
@@ -185,8 +185,11 @@ void fpstate_init(union fpregs_state *state)
 }
 EXPORT_SYMBOL_GPL(fpstate_init);
 
-int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu)
+int fpu__copy(struct task_struct *dst, struct task_struct *src)
 {
+	struct fpu *dst_fpu = &dst->thread.fpu;
+	struct fpu *src_fpu = &src->thread.fpu;
+
 	dst_fpu->last_cpu = -1;
 
 	if (!static_cpu_has(X86_FEATURE_FPU))
@@ -201,16 +204,23 @@ int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu)
 	memset(&dst_fpu->state.xsave, 0, fpu_kernel_xstate_size);
 
 	/*
-	 * Save current FPU registers directly into the child
-	 * FPU context, without any memory-to-memory copying.
+	 * If the FPU registers are not current just memcpy() the state.
+	 * Otherwise save current FPU registers directly into the child's FPU
+	 * context, without any memory-to-memory copying.
 	 *
 	 * ( The function 'fails' in the FNSAVE case, which destroys
-	 *   register contents so we have to copy them back. )
+	 *   register contents so we have to load them back. )
 	 */
-	if (!copy_fpregs_to_fpstate(dst_fpu)) {
-		memcpy(&src_fpu->state, &dst_fpu->state, fpu_kernel_xstate_size);
-		copy_kernel_to_fpregs(&src_fpu->state);
-	}
+	fpregs_lock();
+	if (test_thread_flag(TIF_NEED_FPU_LOAD))
+		memcpy(&dst_fpu->state, &src_fpu->state, fpu_kernel_xstate_size);
+
+	else if (!copy_fpregs_to_fpstate(dst_fpu))
+		copy_kernel_to_fpregs(&dst_fpu->state);
+
+	fpregs_unlock();
+
+	set_tsk_thread_flag(dst, TIF_NEED_FPU_LOAD);
 
 	trace_x86_fpu_copy_src(src_fpu);
 	trace_x86_fpu_copy_dst(dst_fpu);
@@ -226,10 +236,9 @@ static void fpu__initialize(struct fpu *fpu)
 {
 	WARN_ON_FPU(fpu != &current->thread.fpu);
 
+	set_thread_flag(TIF_NEED_FPU_LOAD);
 	fpstate_init(&fpu->state);
 	trace_x86_fpu_init_state(fpu);
-
-	trace_x86_fpu_activate_state(fpu);
 }
 
 /*
@@ -308,6 +317,8 @@ void fpu__drop(struct fpu *fpu)
  */
 static inline void copy_init_fpstate_to_fpregs(void)
 {
+	fpregs_lock();
+
 	if (use_xsave())
 		copy_kernel_to_xregs(&init_fpstate.xsave, -1);
 	else if (static_cpu_has(X86_FEATURE_FXSR))
@@ -317,6 +328,9 @@ static inline void copy_init_fpstate_to_fpregs(void)
 
 	if (boot_cpu_has(X86_FEATURE_OSPKE))
 		copy_init_pkru_to_fpregs();
+
+	fpregs_mark_activate();
+	fpregs_unlock();
 }
 
 /*
@@ -339,6 +353,45 @@ void fpu__clear(struct fpu *fpu)
 		copy_init_fpstate_to_fpregs();
 }
 
+/*
+ * Load FPU context before returning to userspace.
+ */
+void switch_fpu_return(void)
+{
+	if (!static_cpu_has(X86_FEATURE_FPU))
+		return;
+
+	__fpregs_load_activate();
+}
+EXPORT_SYMBOL_GPL(switch_fpu_return);
+
+#ifdef CONFIG_X86_DEBUG_FPU
+/*
+ * If current FPU state according to its tracking (loaded FPU ctx on this CPU)
+ * is not valid then we must have TIF_NEED_FPU_LOAD set so the context is loaded on
+ * return to userland.
+ */
+void fpregs_assert_state_consistent(void)
+{
+       struct fpu *fpu = &current->thread.fpu;
+
+       if (test_thread_flag(TIF_NEED_FPU_LOAD))
+               return;
+       WARN_ON_FPU(!fpregs_state_valid(fpu, smp_processor_id()));
+}
+EXPORT_SYMBOL_GPL(fpregs_assert_state_consistent);
+#endif
+
+void fpregs_mark_activate(void)
+{
+	struct fpu *fpu = &current->thread.fpu;
+
+	fpregs_activate(fpu);
+	fpu->last_cpu = smp_processor_id();
+	clear_thread_flag(TIF_NEED_FPU_LOAD);
+}
+EXPORT_SYMBOL_GPL(fpregs_mark_activate);
+
 /*
  * x87 math exception handling:
  */
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 5f8ce0285f641..589fb27515e08 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -229,11 +229,9 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 	struct fpu *fpu = &tsk->thread.fpu;
 	int state_size = fpu_kernel_xstate_size;
 	struct user_i387_ia32_struct env;
-	union fpregs_state *state;
 	u64 xfeatures = 0;
 	int fx_only = 0;
 	int ret = 0;
-	void *tmp;
 
 	ia32_fxstate &= (IS_ENABLED(CONFIG_X86_32) ||
 			 IS_ENABLED(CONFIG_IA32_EMULATION));
@@ -268,14 +266,18 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		}
 	}
 
-	tmp = kzalloc(sizeof(*state) + fpu_kernel_xstate_size + 64, GFP_KERNEL);
-	if (!tmp)
-		return -ENOMEM;
-	state = PTR_ALIGN(tmp, 64);
+	/*
+	 * The current state of the FPU registers does not matter. By setting
+	 * TIF_NEED_FPU_LOAD unconditionally it is ensured that the our xstate
+	 * is not modified on context switch and that the xstate is considered
+	 * to loaded again on return to userland (overriding last_cpu avoids the
+	 * optimisation).
+	 */
+	set_thread_flag(TIF_NEED_FPU_LOAD);
+	__fpu_invalidate_fpregs_state(fpu);
 
 	if ((unsigned long)buf_fx % 64)
 		fx_only = 1;
-
 	/*
 	 * For 32-bit frames with fxstate, copy the fxstate so it can be
 	 * reconstructed later.
@@ -290,43 +292,51 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		u64 init_bv = xfeatures_mask & ~xfeatures;
 
 		if (using_compacted_format()) {
-			ret = copy_user_to_xstate(&state->xsave, buf_fx);
+			ret = copy_user_to_xstate(&fpu->state.xsave, buf_fx);
 		} else {
-			ret = __copy_from_user(&state->xsave, buf_fx, state_size);
+			ret = __copy_from_user(&fpu->state.xsave, buf_fx, state_size);
 
 			if (!ret && state_size > offsetof(struct xregs_state, header))
-				ret = validate_xstate_header(&state->xsave.header);
+				ret = validate_xstate_header(&fpu->state.xsave.header);
 		}
 		if (ret)
 			goto err_out;
 
-		sanitize_restored_xstate(state, envp, xfeatures, fx_only);
+		sanitize_restored_xstate(&fpu->state, envp, xfeatures, fx_only);
 
+		fpregs_lock();
 		if (unlikely(init_bv))
 			copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
-		ret = copy_users_to_xregs(&state->xsave, xfeatures);
+		ret = copy_users_to_xregs(&fpu->state.xsave, xfeatures);
 
 	} else if (use_fxsr()) {
-		ret = __copy_from_user(&state->fxsave, buf_fx, state_size);
-		if (ret)
+		ret = __copy_from_user(&fpu->state.fxsave, buf_fx, state_size);
+		if (ret) {
+			ret = -EFAULT;
 			goto err_out;
+		}
 
-		sanitize_restored_xstate(state, envp, xfeatures, fx_only);
+		sanitize_restored_xstate(&fpu->state, envp, xfeatures, fx_only);
+
+		fpregs_lock();
 		if (use_xsave()) {
 			u64 init_bv = xfeatures_mask & ~XFEATURE_MASK_FPSSE;
 			copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
 		}
 
-		ret = copy_users_to_fxregs(&state->fxsave);
+		ret = copy_users_to_fxregs(&fpu->state.fxsave);
 	} else {
-		ret = __copy_from_user(&state->fsave, buf_fx, state_size);
+		ret = __copy_from_user(&fpu->state.fsave, buf_fx, state_size);
 		if (ret)
 			goto err_out;
+		fpregs_lock();
 		ret = copy_users_to_fregs(buf_fx);
 	}
+	if (!ret)
+		fpregs_mark_activate();
+	fpregs_unlock();
 
 err_out:
-	kfree(tmp);
 	if (ret)
 		fpu__clear(fpu);
 	return ret;
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 58ac7be52c7a6..b9b8e6eb74f27 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -101,7 +101,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	dst->thread.vm86 = NULL;
 #endif
 
-	return fpu__copy(&dst->thread.fpu, &src->thread.fpu);
+	return fpu__copy(dst, src);
 }
 
 /*
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 77d9eb43ccac8..1bc47f3a48854 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -234,7 +234,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
 
-	switch_fpu_prepare(prev_fpu, cpu);
+	if (!test_thread_flag(TIF_NEED_FPU_LOAD))
+		switch_fpu_prepare(prev_fpu, cpu);
 
 	/*
 	 * Save away %gs. No need to save %fs, as it was saved on the
@@ -290,7 +291,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	this_cpu_write(current_task, next_p);
 
-	switch_fpu_finish(next_fpu, cpu);
+	switch_fpu_finish(next_fpu);
 
 	/* Load the Intel cache allocation PQR MSR. */
 	resctrl_sched_in();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ffea7c557963a..37b2ecef041e6 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -520,7 +520,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_DEBUG_ENTRY) &&
 		     this_cpu_read(irq_count) != -1);
 
-	switch_fpu_prepare(prev_fpu, cpu);
+	if (!test_thread_flag(TIF_NEED_FPU_LOAD))
+		switch_fpu_prepare(prev_fpu, cpu);
 
 	/* We must save %fs and %gs before load_TLS() because
 	 * %fs and %gs may be cleared by load_TLS().
@@ -572,7 +573,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	this_cpu_write(current_task, next_p);
 	this_cpu_write(cpu_current_top_of_stack, task_top_of_stack(next_p));
 
-	switch_fpu_finish(next_fpu, cpu);
+	switch_fpu_finish(next_fpu);
 
 	/* Reload sp0. */
 	update_task_stack(next_p);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index aa5fe360df50b..a8cc817882788 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7849,6 +7849,10 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		wait_lapic_expire(vcpu);
 	guest_enter_irqoff();
 
+	fpregs_assert_state_consistent();
+	if (test_thread_flag(TIF_NEED_FPU_LOAD))
+		switch_fpu_return();
+
 	if (unlikely(vcpu->arch.switch_db_regs)) {
 		set_debugreg(0, 7);
 		set_debugreg(vcpu->arch.eff_db[0], 0);
@@ -8109,22 +8113,30 @@ static int complete_emulated_mmio(struct kvm_vcpu *vcpu)
 /* Swap (qemu) user FPU context for the guest FPU context. */
 static void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 {
-	preempt_disable();
+	fpregs_lock();
+
 	copy_fpregs_to_fpstate(&current->thread.fpu);
 	/* PKRU is separately restored in kvm_x86_ops->run.  */
 	__copy_kernel_to_fpregs(&vcpu->arch.guest_fpu->state,
 				~XFEATURE_MASK_PKRU);
-	preempt_enable();
+
+	fpregs_mark_activate();
+	fpregs_unlock();
+
 	trace_kvm_fpu(1);
 }
 
 /* When vcpu_run ends, restore user space FPU context. */
 static void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 {
-	preempt_disable();
+	fpregs_lock();
+
 	copy_fpregs_to_fpstate(vcpu->arch.guest_fpu);
 	copy_kernel_to_fpregs(&current->thread.fpu.state);
-	preempt_enable();
+
+	fpregs_mark_activate();
+	fpregs_unlock();
+
 	++vcpu->stat.fpu_reload;
 	trace_kvm_fpu(0);
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 24/24] x86/pkeys: add PKRU value to init_fpstate
  2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
                   ` (22 preceding siblings ...)
  2019-03-21 20:26 ` [PATCH 23/24] x86/fpu: Defer FPU state load until return to userspace Sebastian Andrzej Siewior
@ 2019-03-21 20:26 ` Sebastian Andrzej Siewior
  23 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-21 20:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen,
	Sebastian Andrzej Siewior

The task's initiall PKRU value is set part for fpu__clear()/
copy_init_pkru_to_fpregs(). It is not part of init_fpstate.xsave and
instead it is set explictly.
If the user removes the PKRU state from XSAVE in the signal handler then
__fpu__restore_sig() will restore the missing bits from `init_fpstate'
and initialize the PKRU value to 0.

Add the `init_pkru_value' to `init_fpstate' so it is set to the init
value in such a case.

In theory we could drop copy_init_pkru_to_fpregs() because restoring the
PKRU at return-to-userland should be enough.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/kernel/cpu/common.c | 5 +++++
 arch/x86/mm/pkeys.c          | 6 ++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index cb28e98a0659a..352fa19e63110 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -372,6 +372,8 @@ static bool pku_disabled;
 
 static __always_inline void setup_pku(struct cpuinfo_x86 *c)
 {
+	struct pkru_state *pk;
+
 	/* check the boot processor, plus compile options for PKU: */
 	if (!cpu_feature_enabled(X86_FEATURE_PKU))
 		return;
@@ -382,6 +384,9 @@ static __always_inline void setup_pku(struct cpuinfo_x86 *c)
 		return;
 
 	cr4_set_bits(X86_CR4_PKE);
+	pk = get_xsave_addr(&init_fpstate.xsave, XFEATURE_PKRU);
+	if (pk)
+		pk->pkru = init_pkru_value;
 	/*
 	 * Seting X86_CR4_PKE will cause the X86_FEATURE_OSPKE
 	 * cpuid bit to be set.  We need to ensure that we
diff --git a/arch/x86/mm/pkeys.c b/arch/x86/mm/pkeys.c
index 2ecbf4155f98f..1dcfc91c8f0c3 100644
--- a/arch/x86/mm/pkeys.c
+++ b/arch/x86/mm/pkeys.c
@@ -18,6 +18,7 @@
 
 #include <asm/cpufeature.h>             /* boot_cpu_has, ...            */
 #include <asm/mmu_context.h>            /* vma_pkey()                   */
+#include <asm/fpu/internal.h>		/* init_fpstate			*/
 
 int __execute_only_pkey(struct mm_struct *mm)
 {
@@ -161,6 +162,7 @@ static ssize_t init_pkru_read_file(struct file *file, char __user *user_buf,
 static ssize_t init_pkru_write_file(struct file *file,
 		 const char __user *user_buf, size_t count, loff_t *ppos)
 {
+	struct pkru_state *pk;
 	char buf[32];
 	ssize_t len;
 	u32 new_init_pkru;
@@ -183,6 +185,10 @@ static ssize_t init_pkru_write_file(struct file *file,
 		return -EINVAL;
 
 	WRITE_ONCE(init_pkru_value, new_init_pkru);
+	pk = get_xsave_addr(&init_fpstate.xsave, XFEATURE_PKRU);
+	if (!pk)
+		return -EINVAL;
+	pk->pkru = new_init_pkru;
 	return count;
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* Re: [PATCH 21/24] x86/fpu: Let __fpu__restore_sig() restore the !32bit+fxsr frame from kernel memory
  2019-03-21 20:26 ` [PATCH 21/24] x86/fpu: Let __fpu__restore_sig() restore the !32bit+fxsr frame from kernel memory Sebastian Andrzej Siewior
@ 2019-03-22 14:55   ` Sebastian Andrzej Siewior
  0 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-03-22 14:55 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Andy Lutomirski, Paolo Bonzini, Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen

On 2019-03-21 21:26:29 [+0100], To linux-kernel@vger.kernel.org wrote:
> diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
> index 5a467a381245c..052a16c96218f 100644
> --- a/arch/x86/kernel/fpu/signal.c
> +++ b/arch/x86/kernel/fpu/signal.c
> @@ -297,28 +298,63 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
> +		} else {
> +			ret = __copy_from_user(&state->fsave, buf_fx, state_size);
> +			if (ret)
> +				goto err_out;
> +			ret = copy_users_to_fregs(buf_fx);

This needs to become 
	ret = copy_users_to_fregs(&fpu->state.fsave);

here and in the follow up patch (fixing locally)

> +		}

Sebastian

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 17/24] x86/fpu: Always store the registers in copy_fpstate_to_sigframe()
  2019-03-21 20:26 ` [PATCH 17/24] x86/fpu: Always store the registers in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
@ 2019-03-31 16:54   ` Thomas Gleixner
  0 siblings, 0 replies; 29+ messages in thread
From: Thomas Gleixner @ 2019-03-31 16:54 UTC (permalink / raw)
  To: Sebastian Andrzej Siewior
  Cc: linux-kernel, x86, Andy Lutomirski, Paolo Bonzini,
	Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen

On Thu, 21 Mar 2019, Sebastian Andrzej Siewior wrote:
> @@ -169,9 +155,15 @@ int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
>  			sizeof(struct user_i387_ia32_struct), NULL,
>  			(struct _fpstate_32 __user *) buf) ? -1 : 1;
>  
> -	/* Save the live register state to the user directly. */
> -	if (copy_fpregs_to_sigframe(buf_fx))
> -		return -1;
> +	copy_fpregs_to_fpstate(fpu);
> +
> +	if (using_compacted_format()) {
> +		copy_xstate_to_user(buf_fx, xsave, 0, size);

This needs to check the return value. 

> +	} else {
> +		fpstate_sanitize_xstate(fpu);
> +		if (__copy_to_user(buf_fx, xsave, fpu_user_xstate_size))
> +			return -1;
> +	}

Thanks,

	tglx

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 18/24] x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD
  2019-03-21 20:26 ` [PATCH 18/24] x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
@ 2019-03-31 18:20   ` Thomas Gleixner
  2019-04-01  8:24     ` Sebastian Andrzej Siewior
  0 siblings, 1 reply; 29+ messages in thread
From: Thomas Gleixner @ 2019-03-31 18:20 UTC (permalink / raw)
  To: Sebastian Andrzej Siewior
  Cc: linux-kernel, x86, Andy Lutomirski, Paolo Bonzini,
	Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen

On Thu, 21 Mar 2019, Sebastian Andrzej Siewior wrote:

> From: Rik van Riel <riel@surriel.com>
> 
> The FPU registers need only to be saved if TIF_NEED_FPU_LOAD is not set.
> Otherwise this has been already done and can be skipped.
> 
> Signed-off-by: Rik van Riel <riel@surriel.com>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
>  arch/x86/kernel/fpu/signal.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
> index f55f16d9e7e4e..97ea6909ede1f 100644
> --- a/arch/x86/kernel/fpu/signal.c
> +++ b/arch/x86/kernel/fpu/signal.c
> @@ -155,7 +155,16 @@ int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
>  			sizeof(struct user_i387_ia32_struct), NULL,
>  			(struct _fpstate_32 __user *) buf) ? -1 : 1;
>  
> -	copy_fpregs_to_fpstate(fpu);
> +	fpregs_lock();
> +	/*
> +	 * If we do not need to load the FPU registers at return to userspace
> +	 * then the CPU has the current state and we need to save it. Otherwise
> +	 * it is already done and we can skip it.
> +	 */
> +	if (!test_thread_flag(TIF_NEED_FPU_LOAD))
> +		copy_fpregs_to_fpstate(fpu);

I think this should do the following:

	fpregs_lock();
	if (!test_thread_flag(TIF_NEED_FPU_LOAD)) {
		pagefault_disable();
		ret = copy_fpu_to_user(...);
		pagefault_enable();
		if (!res)
			return 0;
		copy_fpregs_to_fpstate(fpu); 
	}
	fpregs_unlock();

The point is that in most cases the direct store from the FPU registers to
user space will succeed simply because the stack is accessible and you only
do the store in kernel memory and copy when that fails.

Thanks,

	tglx



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 18/24] x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD
  2019-03-31 18:20   ` Thomas Gleixner
@ 2019-04-01  8:24     ` Sebastian Andrzej Siewior
  0 siblings, 0 replies; 29+ messages in thread
From: Sebastian Andrzej Siewior @ 2019-04-01  8:24 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: linux-kernel, x86, Andy Lutomirski, Paolo Bonzini,
	Radim Krčmář,
	kvm, Jason A. Donenfeld, Rik van Riel, Dave Hansen

On 2019-03-31 20:20:25 [+0200], Thomas Gleixner wrote:
> 
> I think this should do the following:
> 
> 	fpregs_lock();
> 	if (!test_thread_flag(TIF_NEED_FPU_LOAD)) {
> 		pagefault_disable();
> 		ret = copy_fpu_to_user(...);
> 		pagefault_enable();
> 		if (!res)
> 			return 0;
> 		copy_fpregs_to_fpstate(fpu); 
> 	}
> 	fpregs_unlock();
> 
> The point is that in most cases the direct store from the FPU registers to
> user space will succeed simply because the stack is accessible and you only
> do the store in kernel memory and copy when that fails.

let me try that.

> Thanks,
> 
> 	tglx
> 

Sebastian

^ permalink raw reply	[flat|nested] 29+ messages in thread

end of thread, other threads:[~2019-04-01  8:24 UTC | newest]

Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-21 20:26 [PATCH v8] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 01/24] x86/fpu: Remove fpu->initialized usage in __fpu__restore_sig() Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 02/24] x86/fpu: Remove fpu__restore() Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 03/24] x86/fpu: Remove preempt_disable() in fpu__clear() Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 04/24] x86/fpu: Always init the `state' " Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 05/24] x86/fpu: Remove fpu->initialized usage in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 06/24] x86/fpu: Don't save fxregs for ia32 frames " Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 07/24] x86/fpu: Remove fpu->initialized Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 08/24] x86/fpu: Remove user_fpu_begin() Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 09/24] x86/fpu: Add (__)make_fpregs_active helpers Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 10/24] x86/fpu: Make __raw_xsave_addr() use feature number instead of mask Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 11/24] x86/fpu: Make get_xsave_field_ptr() and get_xsave_addr() " Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 12/24] x86/pkru: Provide .*_pkru_ins() functions Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 13/24] x86/fpu: Only write PKRU if it is different from current Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 14/24] x86/pkeys: Don't check if PKRU is zero before writting it Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 15/24] x86/fpu: Eager switch PKRU state Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 16/24] x86/entry: Add TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 17/24] x86/fpu: Always store the registers in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
2019-03-31 16:54   ` Thomas Gleixner
2019-03-21 20:26 ` [PATCH 18/24] x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
2019-03-31 18:20   ` Thomas Gleixner
2019-04-01  8:24     ` Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 19/24] x86/fpu: Update xstate's PKRU value on write_pkru() Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 20/24] x86/fpu: Inline copy_user_to_fpregs_zeroing() Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 21/24] x86/fpu: Let __fpu__restore_sig() restore the !32bit+fxsr frame from kernel memory Sebastian Andrzej Siewior
2019-03-22 14:55   ` Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 22/24] x86/fpu: Merge the two code paths in __fpu__restore_sig() Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 23/24] x86/fpu: Defer FPU state load until return to userspace Sebastian Andrzej Siewior
2019-03-21 20:26 ` [PATCH 24/24] x86/pkeys: add PKRU value to init_fpstate Sebastian Andrzej Siewior

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.