From: Yu Chen <chenyu56@huawei.com>
To: <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <john.stultz@linaro.org>, <suzhuangluan@hisilicon.com>,
<kongfei@hisilicon.com>, <liuyu712@hisilicon.com>,
<wanghu17@hisilicon.com>, <butao@hisilicon.com>,
<chenyao11@huawei.com>, <fangshengzhou@hisilicon.com>,
<lipengcheng8@huawei.com>, <songxiaowei@hisilicon.com>,
<xuyiping@hisilicon.com>, <xuyoujun4@huawei.com>,
<yudongbin@hisilicon.com>, <zangleigang@hisilicon.com>,
Yu Chen <chenyu56@huawei.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Felipe Balbi <balbi@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
Binghui Wang <wangbinghui@hisilicon.com>
Subject: [PATCH v5 04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
Date: Fri, 29 Mar 2019 12:14:00 +0800 [thread overview]
Message-ID: <20190329041409.70138-5-chenyu56@huawei.com> (raw)
In-Reply-To: <20190329041409.70138-1-chenyu56@huawei.com>
SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core
of Hisilicon Kirin Soc when dwc3 core act as host.
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v4:
* Add dwc3_complete definition while CONFIG_PM_SLEEP does not defined.
* Add description for 'dis_split_quirk'.
---
---
drivers/usb/dwc3/core.c | 26 ++++++++++++++++++++++++++
drivers/usb/dwc3/core.h | 7 +++++++
2 files changed, 33 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a1b126f90261..c3ef6bd2b0d4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -117,6 +117,7 @@ static void __dwc3_set_mode(struct work_struct *work)
struct dwc3 *dwc = work_to_dwc(work);
unsigned long flags;
int ret;
+ u32 reg;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return;
@@ -169,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work)
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
phy_calibrate(dwc->usb2_generic_phy);
+ if (dwc->dis_split_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1306,6 +1312,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->dis_metastability_quirk = device_property_read_bool(dev,
"snps,dis_metastability_quirk");
+ dwc->dis_split_quirk = device_property_read_bool(dev,
+ "snps,dis-split-quirk");
+
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1825,10 +1834,27 @@ static int dwc3_resume(struct device *dev)
return 0;
}
+
+static void dwc3_complete(struct device *dev)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ u32 reg;
+
+ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+ dwc->dis_split_quirk) {
+ dev_dbg(dwc->dev, "set DWC3_GUCTL3_SPLITDISABLE\n");
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
+}
+#else
+#define dwc3_complete NULL
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops dwc3_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+ .complete = dwc3_complete,
SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
dwc3_runtime_idle)
};
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1528d395b156..28475e301ad9 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -136,6 +136,7 @@
#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10))
#define DWC3_GHWPARAMS8 0xc600
+#define DWC3_GUCTL3 0xc60c
#define DWC3_GFLADJ 0xc630
/* Device Registers */
@@ -370,6 +371,9 @@
/* Global User Control Register 2 */
#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE BIT(14)
+
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
@@ -1030,6 +1034,7 @@ struct dwc3_scratchpad_array {
* 2 - No de-emphasis
* 3 - Reserved
* @dis_metastability_quirk: set to disable metastability quirk.
+ * @dis_split_quirk: set to disable split boundary.
* @imod_interval: set the interrupt moderation interval in 250ns
* increments or 0 to disable.
*/
@@ -1216,6 +1221,8 @@ struct dwc3 {
unsigned dis_metastability_quirk:1;
+ unsigned dis_split_quirk:1;
+
u16 imod_interval;
};
--
2.15.0-rc2
WARNING: multiple messages have this Message-ID (diff)
From: Yu Chen <chenyu56@huawei.com>
To: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: john.stultz@linaro.org, suzhuangluan@hisilicon.com,
kongfei@hisilicon.com, liuyu712@hisilicon.com,
wanghu17@hisilicon.com, butao@hisilicon.com,
chenyao11@huawei.com, fangshengzhou@hisilicon.com,
lipengcheng8@huawei.com, songxiaowei@hisilicon.com,
xuyiping@hisilicon.com, xuyoujun4@huawei.com,
yudongbin@hisilicon.com, zangleigang@hisilicon.com,
Yu Chen <chenyu56@huawei.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Binghui Wang <wangbinghui@hisilicon.com>
Subject: [PATCH v5 04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
Date: Fri, 29 Mar 2019 12:14:00 +0800 [thread overview]
Message-ID: <20190329041409.70138-5-chenyu56@huawei.com> (raw)
In-Reply-To: <20190329041409.70138-1-chenyu56@huawei.com>
SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core
of Hisilicon Kirin Soc when dwc3 core act as host.
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v4:
* Add dwc3_complete definition while CONFIG_PM_SLEEP does not defined.
* Add description for 'dis_split_quirk'.
---
---
drivers/usb/dwc3/core.c | 26 ++++++++++++++++++++++++++
drivers/usb/dwc3/core.h | 7 +++++++
2 files changed, 33 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a1b126f90261..c3ef6bd2b0d4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -117,6 +117,7 @@ static void __dwc3_set_mode(struct work_struct *work)
struct dwc3 *dwc = work_to_dwc(work);
unsigned long flags;
int ret;
+ u32 reg;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return;
@@ -169,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work)
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
phy_calibrate(dwc->usb2_generic_phy);
+ if (dwc->dis_split_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1306,6 +1312,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->dis_metastability_quirk = device_property_read_bool(dev,
"snps,dis_metastability_quirk");
+ dwc->dis_split_quirk = device_property_read_bool(dev,
+ "snps,dis-split-quirk");
+
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1825,10 +1834,27 @@ static int dwc3_resume(struct device *dev)
return 0;
}
+
+static void dwc3_complete(struct device *dev)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ u32 reg;
+
+ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+ dwc->dis_split_quirk) {
+ dev_dbg(dwc->dev, "set DWC3_GUCTL3_SPLITDISABLE\n");
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
+}
+#else
+#define dwc3_complete NULL
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops dwc3_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+ .complete = dwc3_complete,
SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
dwc3_runtime_idle)
};
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1528d395b156..28475e301ad9 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -136,6 +136,7 @@
#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10))
#define DWC3_GHWPARAMS8 0xc600
+#define DWC3_GUCTL3 0xc60c
#define DWC3_GFLADJ 0xc630
/* Device Registers */
@@ -370,6 +371,9 @@
/* Global User Control Register 2 */
#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE BIT(14)
+
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
@@ -1030,6 +1034,7 @@ struct dwc3_scratchpad_array {
* 2 - No de-emphasis
* 3 - Reserved
* @dis_metastability_quirk: set to disable metastability quirk.
+ * @dis_split_quirk: set to disable split boundary.
* @imod_interval: set the interrupt moderation interval in 250ns
* increments or 0 to disable.
*/
@@ -1216,6 +1221,8 @@ struct dwc3 {
unsigned dis_metastability_quirk:1;
+ unsigned dis_split_quirk:1;
+
u16 imod_interval;
};
--
2.15.0-rc2
WARNING: multiple messages have this Message-ID (diff)
From: Yu Chen <chenyu56@huawei.com>
To: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: john.stultz@linaro.org, suzhuangluan@hisilicon.com,
kongfei@hisilicon.com, liuyu712@hisilicon.com,
wanghu17@hisilicon.com, butao@hisilicon.com,
chenyao11@huawei.com, fangshengzhou@hisilicon.com,
lipengcheng8@huawei.com, songxiaowei@hisilicon.com,
xuyiping@hisilicon.com, xuyoujun4@huawei.com,
yudongbin@hisilicon.com, zangleigang@hisilicon.com,
Yu Chen <chenyu56@huawei.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Binghui Wang <wangbinghui@hisilicon.com>
Subject: [v5,04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
Date: Fri, 29 Mar 2019 12:14:00 +0800 [thread overview]
Message-ID: <20190329041409.70138-5-chenyu56@huawei.com> (raw)
SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core
of Hisilicon Kirin Soc when dwc3 core act as host.
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v4:
* Add dwc3_complete definition while CONFIG_PM_SLEEP does not defined.
* Add description for 'dis_split_quirk'.
---
---
drivers/usb/dwc3/core.c | 26 ++++++++++++++++++++++++++
drivers/usb/dwc3/core.h | 7 +++++++
2 files changed, 33 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a1b126f90261..c3ef6bd2b0d4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -117,6 +117,7 @@ static void __dwc3_set_mode(struct work_struct *work)
struct dwc3 *dwc = work_to_dwc(work);
unsigned long flags;
int ret;
+ u32 reg;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return;
@@ -169,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work)
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
phy_calibrate(dwc->usb2_generic_phy);
+ if (dwc->dis_split_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1306,6 +1312,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->dis_metastability_quirk = device_property_read_bool(dev,
"snps,dis_metastability_quirk");
+ dwc->dis_split_quirk = device_property_read_bool(dev,
+ "snps,dis-split-quirk");
+
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1825,10 +1834,27 @@ static int dwc3_resume(struct device *dev)
return 0;
}
+
+static void dwc3_complete(struct device *dev)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ u32 reg;
+
+ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+ dwc->dis_split_quirk) {
+ dev_dbg(dwc->dev, "set DWC3_GUCTL3_SPLITDISABLE\n");
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
+}
+#else
+#define dwc3_complete NULL
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops dwc3_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+ .complete = dwc3_complete,
SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
dwc3_runtime_idle)
};
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1528d395b156..28475e301ad9 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -136,6 +136,7 @@
#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10))
#define DWC3_GHWPARAMS8 0xc600
+#define DWC3_GUCTL3 0xc60c
#define DWC3_GFLADJ 0xc630
/* Device Registers */
@@ -370,6 +371,9 @@
/* Global User Control Register 2 */
#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE BIT(14)
+
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
@@ -1030,6 +1034,7 @@ struct dwc3_scratchpad_array {
* 2 - No de-emphasis
* 3 - Reserved
* @dis_metastability_quirk: set to disable metastability quirk.
+ * @dis_split_quirk: set to disable split boundary.
* @imod_interval: set the interrupt moderation interval in 250ns
* increments or 0 to disable.
*/
@@ -1216,6 +1221,8 @@ struct dwc3 {
unsigned dis_metastability_quirk:1;
+ unsigned dis_split_quirk:1;
+
u16 imod_interval;
};
next prev parent reply other threads:[~2019-03-29 4:15 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-29 4:13 [PATCH v5 00/13] Add support for usb on Hikey960 Yu Chen
2019-03-29 4:13 ` Yu Chen
2019-03-29 4:13 ` [PATCH v5 01/13] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY Yu Chen
2019-03-29 4:13 ` [v5,01/13] " Yu Chen
2019-03-29 4:13 ` [PATCH v5 01/13] " Yu Chen
2019-03-29 4:13 ` [PATCH v5 02/13] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960 Yu Chen
2019-03-29 4:13 ` [v5,02/13] " Yu Chen
2019-03-29 4:13 ` [PATCH v5 02/13] " Yu Chen
2019-03-29 4:13 ` [PATCH v5 03/13] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform Yu Chen
2019-03-29 4:13 ` [v5,03/13] " Yu Chen
2019-03-29 4:13 ` [PATCH v5 03/13] " Yu Chen
2019-03-29 4:14 ` Yu Chen [this message]
2019-03-29 4:14 ` [v5,04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc Yu Chen
2019-03-29 4:14 ` [PATCH v5 04/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 05/13] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe " Yu Chen
2019-03-29 4:14 ` [v5,05/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 05/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 06/13] usb: dwc3: Increase timeout for CmdAct cleared by device controller Yu Chen
2019-03-29 4:14 ` [v5,06/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 06/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon Yu Chen
2019-03-29 4:14 ` [v5,07/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 07/13] " Yu Chen
2019-04-17 6:42 ` Kishon Vijay Abraham I
2019-04-17 6:42 ` [v5,07/13] " Kishon Vijay Abraham I
2019-04-17 6:42 ` [PATCH v5 07/13] " Kishon Vijay Abraham I
2019-04-17 7:19 ` Chen Yu
2019-04-17 7:19 ` [v5,07/13] " Yu Chen
2019-04-17 7:19 ` [PATCH v5 07/13] " Chen Yu
2019-03-29 4:14 ` [PATCH v5 08/13] usb: roles: Introduce stubs for the exiting functions in role.h Yu Chen
2019-03-29 4:14 ` [v5,08/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 08/13] " Yu Chen
2019-04-04 13:25 ` Heikki Krogerus
2019-04-04 13:25 ` [v5,08/13] " Heikki Krogerus
2019-03-29 4:14 ` [PATCH v5 09/13] usb: roles: Add usb role switch notifier Yu Chen
2019-03-29 4:14 ` [v5,09/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 09/13] " Yu Chen
2019-04-04 13:26 ` Heikki Krogerus
2019-04-04 13:26 ` [v5,09/13] " Heikki Krogerus
2019-04-12 1:12 ` [PATCH v5 09/13] " John Stultz
2019-04-12 1:12 ` [v5,09/13] " John Stultz
2019-04-12 1:12 ` [PATCH v5 09/13] " John Stultz
2019-04-12 3:59 ` John Stultz
2019-04-12 3:59 ` [v5,09/13] " John Stultz
2019-04-12 3:59 ` [PATCH v5 09/13] " John Stultz
2019-03-29 4:14 ` [PATCH v5 10/13] usb: dwc3: Registering a role switch in the DRD code Yu Chen
2019-03-29 4:14 ` [v5,10/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 10/13] " Yu Chen
2019-04-12 0:48 ` John Stultz
2019-04-12 0:48 ` [v5,10/13] " John Stultz
2019-04-12 0:48 ` [PATCH v5 10/13] " John Stultz
2019-04-12 1:23 ` Chen Yu
2019-04-12 1:23 ` [v5,10/13] " Yu Chen
2019-04-12 1:23 ` [PATCH v5 10/13] " Chen Yu
2019-03-29 4:14 ` [PATCH v5 11/13] hikey960: Support usb functionality of Hikey960 Yu Chen
2019-03-29 4:14 ` [v5,11/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 11/13] " Yu Chen
2019-04-12 0:55 ` John Stultz
2019-04-12 0:55 ` [v5,11/13] " John Stultz
2019-04-12 0:55 ` [PATCH v5 11/13] " John Stultz
2019-03-29 4:14 ` [PATCH v5 12/13] usb: gadget: Add configfs attribuite for controling match_existing_only Yu Chen
2019-03-29 4:14 ` [v5,12/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 12/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 13/13] dts: hi3660: Add support for usb on Hikey960 Yu Chen
2019-03-29 4:14 ` Yu Chen
2019-03-29 4:14 ` [v5,13/13] " Yu Chen
2019-03-29 4:14 ` [PATCH v5 13/13] " Yu Chen
2019-04-01 14:57 ` [PATCH v5 00/13] " Valentin Schneider
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190329041409.70138-5-chenyu56@huawei.com \
--to=chenyu56@huawei.com \
--cc=andy.shevchenko@gmail.com \
--cc=balbi@kernel.org \
--cc=butao@hisilicon.com \
--cc=chenyao11@huawei.com \
--cc=devicetree@vger.kernel.org \
--cc=fangshengzhou@hisilicon.com \
--cc=gregkh@linuxfoundation.org \
--cc=john.stultz@linaro.org \
--cc=kongfei@hisilicon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=lipengcheng8@huawei.com \
--cc=liuyu712@hisilicon.com \
--cc=songxiaowei@hisilicon.com \
--cc=suzhuangluan@hisilicon.com \
--cc=wangbinghui@hisilicon.com \
--cc=wanghu17@hisilicon.com \
--cc=xuyiping@hisilicon.com \
--cc=xuyoujun4@huawei.com \
--cc=yudongbin@hisilicon.com \
--cc=zangleigang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.