[PATCH v2 2/3] staging: mt7621-pci-phy: update bindings documentation

[Sergio Paracuellos <sergio.paracuellos@gmail.com>]

Device tree has been simplified to use phy-cells instead of
using child nodes. Update documentation accordly.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
---
 .../mediatek,mt7621-pci-phy.txt               | 44 ++++---------------
 1 file changed, 9 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.txt b/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.txt
index 33a8a698bdd0..a369d715378b 100644
--- a/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.txt
+++ b/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.txt
@@ -3,45 +3,19 @@ Mediatek Mt7621 PCIe PHY
 Required properties:
 - compatible: must be "mediatek,mt7621-pci-phy"
 - reg: base address and length of the PCIe PHY block
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Each PCIe PHY should be represented by a child node
-
-Required properties For the child node:
-- reg: the PHY ID
-0 - PCIe RC 0
-1 - PCIe RC 1
-- #phy-cells: must be 0
+- #phy-cells: must be <1> for pcie0_phy and for pcie1_phy.
 
 Example:
-	pcie0_phy: pcie-phy@1a149000 {
+	pcie0_phy: pcie-phy@1e149000 {
 		compatible = "mediatek,mt7621-pci-phy";
-		reg = <0x1a149000 0x0700>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pcie0_port: pcie-phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-		};
-
-		pcie1_port: pcie-phy@1 {
-			reg = <1>;
-			#phy-cells = <0>;
-		};
+		reg = <0x1e149000 0x0700>;
+		#phy-cells = <1>;
 	};
 
-	pcie1_phy: pcie-phy@1a14a000 {
+	pcie1_phy: pcie-phy@1e14a000 {
 		compatible = "mediatek,mt7621-pci-phy";
-		reg = <0x1a14a000 0x0700>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pcie2_port: pcie-phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-		};
+		reg = <0x1e14a000 0x0700>;
+		#phy-cells = <1>;
 	};
 
 	/* users of the PCIe phy */
@@ -49,6 +23,6 @@ Example:
 	pcie: pcie@1e140000 {
 		...
 		...
-		phys = <&pcie0_port>, <&pcie1_port>, <&pcie2_port>;
+		phys = <&pcie0_phy 0>, <&pcie0_phy 1>, <&pcie1_phy 0>;
 		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
-	};
\ No newline at end of file
+	};
-- 
2.19.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel