[PATCH 11/12] pci doc: convert PCI/endpoint/pci-test-function.txt to rst format

[Changbin Du <changbin.du@gmail.com>]

This converts the plain text documentation to reStructuredText format and
add it to Sphinx TOC tree. No essential content change.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
---
 Documentation/PCI/endpoint/index.rst          |  1 +
 ...est-function.txt => pci-test-function.rst} | 32 +++++++++++--------
 2 files changed, 20 insertions(+), 13 deletions(-)
 rename Documentation/PCI/endpoint/{pci-test-function.txt => pci-test-function.rst} (84%)

diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst
index 3951de9f923c..b680a3fc4fec 100644
--- a/Documentation/PCI/endpoint/index.rst
+++ b/Documentation/PCI/endpoint/index.rst
@@ -9,3 +9,4 @@ PCI Endpoint Framework
 
    pci-endpoint
    pci-endpoint-cfs
+   pci-test-function
diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.rst
similarity index 84%
rename from Documentation/PCI/endpoint/pci-test-function.txt
rename to Documentation/PCI/endpoint/pci-test-function.rst
index 5916f1f592bb..be18ec3d1da0 100644
--- a/Documentation/PCI/endpoint/pci-test-function.txt
+++ b/Documentation/PCI/endpoint/pci-test-function.rst
@@ -1,5 +1,10 @@
-				PCI TEST
-		    Kishon Vijay Abraham I <kishon@ti.com>
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+PCI TEST FUNCTION
+=================
+
+:Author: Kishon Vijay Abraham I <kishon@ti.com>
 
 Traditionally PCI RC has always been validated by using standard
 PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards.
@@ -23,30 +28,31 @@ The PCI endpoint test device has the following registers:
 	8) PCI_ENDPOINT_TEST_IRQ_TYPE
 	9) PCI_ENDPOINT_TEST_IRQ_NUMBER
 
-*) PCI_ENDPOINT_TEST_MAGIC
+* PCI_ENDPOINT_TEST_MAGIC
 
 This register will be used to test BAR0. A known pattern will be written
 and read back from MAGIC register to verify BAR0.
 
-*) PCI_ENDPOINT_TEST_COMMAND:
+* PCI_ENDPOINT_TEST_COMMAND:
 
 This register will be used by the host driver to indicate the function
 that the endpoint device must perform.
 
-Bitfield Description:
+Bitfield Description::
+
   Bit 0		: raise legacy IRQ
   Bit 1		: raise MSI IRQ
   Bit 2		: raise MSI-X IRQ
   Bit 3		: read command (read data from RC buffer)
   Bit 4		: write command (write data to RC buffer)
-  Bit 5		: copy command (copy data from one RC buffer to another
-		  RC buffer)
+  Bit 5		: copy command (copy data from one RC buffer to another RC buffer)
 
-*) PCI_ENDPOINT_TEST_STATUS
+* PCI_ENDPOINT_TEST_STATUS
 
 This register reflects the status of the PCI endpoint device.
 
-Bitfield Description:
+Bitfield Description::
+
   Bit 0		: read success
   Bit 1		: read fail
   Bit 2		: write success
@@ -57,17 +63,17 @@ Bitfield Description:
   Bit 7		: source address is invalid
   Bit 8		: destination address is invalid
 
-*) PCI_ENDPOINT_TEST_SRC_ADDR
+* PCI_ENDPOINT_TEST_SRC_ADDR
 
 This register contains the source address (RC buffer address) for the
 COPY/READ command.
 
-*) PCI_ENDPOINT_TEST_DST_ADDR
+* PCI_ENDPOINT_TEST_DST_ADDR
 
 This register contains the destination address (RC buffer address) for
 the COPY/WRITE command.
 
-*) PCI_ENDPOINT_TEST_IRQ_TYPE
+* PCI_ENDPOINT_TEST_IRQ_TYPE
 
 This register contains the interrupt type (Legacy/MSI) triggered
 for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands.
@@ -77,7 +83,7 @@ Possible types:
  - MSI		: 1
  - MSI-X	: 2
 
-*) PCI_ENDPOINT_TEST_IRQ_NUMBER
+* PCI_ENDPOINT_TEST_IRQ_NUMBER
 
 This register contains the triggered ID interrupt.
 
-- 
2.20.1