All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vincenzo Frascino <vincenzo.frascino@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>
Subject: [PATCH v3 4/4] arm64: compat: Add KUSER_HELPERS config option
Date: Tue,  2 Apr 2019 17:27:57 +0100	[thread overview]
Message-ID: <20190402162757.13491-5-vincenzo.frascino@arm.com> (raw)
In-Reply-To: <20190402162757.13491-1-vincenzo.frascino@arm.com>

When kuser helpers are enabled the kernel maps the relative code at
a fixed address (0xffff0000). Making configurable the option to disable
them means that the kernel can remove this mapping and any access to
this memory area results in a sigfault.

Add a KUSER_HELPERS config option that can be used to disable the
mapping when it is turned off.

This option can be turned off if and only if the applications are
designed specifically for the platform and they do not make use of the
kuser helpers code.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm64/Kconfig          | 28 ++++++++++++++++++++++++++++
 arch/arm64/kernel/Makefile  |  3 ++-
 arch/arm64/kernel/kuser32.S |  7 +++----
 arch/arm64/kernel/vdso.c    | 15 +++++++++++++++
 4 files changed, 48 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 7e34b9eba5de..aa28884a2376 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1494,6 +1494,34 @@ config COMPAT
 
 	  If you want to execute 32-bit userspace applications, say Y.
 
+config KUSER_HELPERS
+	bool "Enable kuser helpers page for 32 bit applications."
+	depends on COMPAT
+	default y
+	help
+	  Warning: disabling this option may break 32-bit user programs.
+
+	  Provide kuser helpers to compat tasks. The kernel provides
+	  helper code to userspace in read only form at a fixed location
+	  to allow userspace to be independent of the CPU type fitted to
+	  the system. This permits binaries to be run on ARMv4 through
+	  to ARMv8 without modification.
+
+	  See Documentation/arm/kernel_user_helpers.txt for details.
+
+	  However, the fixed address nature of these helpers can be used
+	  by ROP (return orientated programming) authors when creating
+	  exploits.
+
+	  If all of the binaries and libraries which run on your platform
+	  are built specifically for your platform, and make no use of
+	  these helpers, then you can turn this option off to hinder
+	  such exploits. However, in that case, if a binary or library
+	  relying on those helpers is run, it will not function correctly.
+
+	  Say N here only if you are absolutely certain that you do not
+	  need these helpers; otherwise, the safe option is to say Y.
+
 config SYSVIPC_COMPAT
 	def_bool y
 	depends on COMPAT && SYSVIPC
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 50f76b88a967..c7bd0794855a 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -27,8 +27,9 @@ OBJCOPYFLAGS := --prefix-symbols=__efistub_
 $(obj)/%.stub.o: $(obj)/%.o FORCE
 	$(call if_changed,objcopy)
 
-obj-$(CONFIG_COMPAT)			+= sys32.o kuser32.o signal32.o 	\
+obj-$(CONFIG_COMPAT)			+= sys32.o signal32.o			\
 					   sigreturn32.o sys_compat.o
+obj-$(CONFIG_KUSER_HELPERS)		+= kuser32.o
 obj-$(CONFIG_FUNCTION_TRACER)		+= ftrace.o entry-ftrace.o
 obj-$(CONFIG_MODULES)			+= module.o
 obj-$(CONFIG_ARM64_MODULE_PLTS)		+= module-plts.o
diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S
index c5f2bbafd723..49825e9e421e 100644
--- a/arch/arm64/kernel/kuser32.S
+++ b/arch/arm64/kernel/kuser32.S
@@ -6,10 +6,9 @@
  * Copyright (C) 2005-2011 Nicolas Pitre <nico@fluxnic.net>
  * Copyright (C) 2012-2018 ARM Ltd.
  *
- * Each segment is 32-byte aligned and will be moved to the top of the high
- * vector page.  New segments (if ever needed) must be added in front of
- * existing ones.  This mechanism should be used only for things that are
- * really small and justified, and not be abused freely.
+ * The kuser helpers below are mapped at a fixed address by
+ * aarch32_setup_additional_pages() and are provided for compatibility
+ * reasons with 32 bit (aarch32) applications that need them.
  *
  * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
  */
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 7ee676c345ed..f012f90000bd 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -77,6 +77,7 @@ static const struct vm_special_mapping aarch32_vdso_spec[C_PAGES] = {
 	},
 };
 
+#ifdef CONFIG_KUSER_HELPERS
 static int aarch32_alloc_kuser_vdso_page(void)
 {
 	extern char __kuser_helper_start[], __kuser_helper_end[];
@@ -98,6 +99,12 @@ static int aarch32_alloc_kuser_vdso_page(void)
 
 	return 0;
 }
+#else
+static int aarch32_alloc_kuser_vdso_page(void)
+{
+	return 0;
+}
+#endif /* CONFIG_KUSER_HELPER */
 
 static int aarch32_alloc_sigreturn_vdso_page(void)
 {
@@ -137,6 +144,7 @@ static int __init aarch32_alloc_vdso_pages(void)
 }
 arch_initcall(aarch32_alloc_vdso_pages);
 
+#ifdef CONFIG_KUSER_HELPERS
 static int aarch32_kuser_helpers_setup(struct mm_struct *mm)
 {
 	void *ret;
@@ -149,6 +157,13 @@ static int aarch32_kuser_helpers_setup(struct mm_struct *mm)
 
 	return PTR_ERR_OR_ZERO(ret);
 }
+#else
+static int aarch32_kuser_helpers_setup(struct mm_struct *mm)
+{
+	/* kuser helpers not enabled */
+	return 0;
+}
+#endif /* CONFIG_KUSER_HELPERS */
 
 static int aarch32_sigreturn_setup(struct mm_struct *mm)
 {
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-04-02 16:29 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-02 16:27 [PATCH v3 0/4] arm64: compat: Add kuser helpers config option Vincenzo Frascino
2019-04-02 16:27 ` [PATCH v3 1/4] arm64: compat: Alloc separate pages for vectors and sigpage Vincenzo Frascino
2019-04-10 18:10   ` Will Deacon
2019-04-12 11:08     ` Vincenzo Frascino
2019-04-12 11:55       ` Will Deacon
2019-04-12 13:28         ` Vincenzo Frascino
2019-04-12 13:30         ` Russell King - ARM Linux admin
2019-04-02 16:27 ` [PATCH v3 2/4] arm64: compat: Split kuser32 Vincenzo Frascino
2019-04-02 16:27 ` [PATCH v3 3/4] arm64: compat: Refactor aarch32_alloc_vdso_pages() Vincenzo Frascino
2019-04-02 16:36   ` Catalin Marinas
2019-04-02 16:27 ` Vincenzo Frascino [this message]
2019-04-04 10:08   ` [PATCH v3 4/4] arm64: compat: Add KUSER_HELPERS config option Catalin Marinas
2019-04-04 14:07     ` Vincenzo Frascino
2019-04-04 14:51       ` Catalin Marinas
2019-04-04 15:01         ` Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190402162757.13491-5-vincenzo.frascino@arm.com \
    --to=vincenzo.frascino@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.