All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, "Andy Lutomirski" <luto@kernel.org>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>,
	kvm@vger.kernel.org, "Jason A. Donenfeld" <Jason@zx2c4.com>,
	"Rik van Riel" <riel@surriel.com>,
	"Dave Hansen" <dave.hansen@linux.intel.com>,
	"Sebastian Andrzej Siewior" <bigeasy@linutronix.de>
Subject: [PATCH 23/27] x86/fpu: Defer FPU state load until return to userspace
Date: Wed,  3 Apr 2019 18:41:52 +0200	[thread overview]
Message-ID: <20190403164156.19645-24-bigeasy@linutronix.de> (raw)
In-Reply-To: <20190403164156.19645-1-bigeasy@linutronix.de>

From: Rik van Riel <riel@surriel.com>

Defer loading of FPU state until return to userspace. This gives
the kernel the potential to skip loading FPU state for tasks that
stay in kernel mode, or for tasks that end up with repeated
invocations of kernel_fpu_begin() & kernel_fpu_end().

The __fpregs_changes_{begin|end}() section ensures that the register
remain unchanged. Otherwise a context switch or a BH could save the
registers to its FPU context and processor's FPU register would became
random if beeing modified at the same time.

KVM swaps the host/guest register on entry/exit path. I kept the flow as
is. First it ensures that the registers are loaded and then saves the
current (host) state before it loads the guest's register. The swap is
done at the very end with disabled interrupts so it should not change
anymore before theg guest is entered. The read/save version seems to be
cheaper compared to memcpy() in a micro benchmark.

Each thread gets TIF_NEED_FPU_LOAD set as part of fork() / fpu__copy().
For kernel threads, this flag gets never cleared which avoids saving /
restoring the FPU state for kernel threads and during in-kernel usage of
the FPU register.

Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/entry/common.c             |   8 +++
 arch/x86/include/asm/fpu/api.h      |  22 +++++-
 arch/x86/include/asm/fpu/internal.h |  27 ++++---
 arch/x86/include/asm/trace/fpu.h    |   5 +-
 arch/x86/kernel/fpu/core.c          | 105 +++++++++++++++++++++-------
 arch/x86/kernel/fpu/signal.c        |  48 ++++++++-----
 arch/x86/kernel/process.c           |   2 +-
 arch/x86/kernel/process_32.c        |   5 +-
 arch/x86/kernel/process_64.c        |   5 +-
 arch/x86/kvm/x86.c                  |  20 ++++--
 10 files changed, 181 insertions(+), 66 deletions(-)

diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index 7bc105f47d21a..13e8e29af6ab7 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -31,6 +31,7 @@
 #include <asm/vdso.h>
 #include <linux/uaccess.h>
 #include <asm/cpufeature.h>
+#include <asm/fpu/api.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
@@ -196,6 +197,13 @@ __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
 	if (unlikely(cached_flags & EXIT_TO_USERMODE_LOOP_FLAGS))
 		exit_to_usermode_loop(regs, cached_flags);
 
+	/* Reload ti->flags; we may have rescheduled above. */
+	cached_flags = READ_ONCE(ti->flags);
+
+	fpregs_assert_state_consistent();
+	if (unlikely(cached_flags & _TIF_NEED_FPU_LOAD))
+		switch_fpu_return();
+
 #ifdef CONFIG_COMPAT
 	/*
 	 * Compat syscalls set TS_COMPAT.  Make sure we clear it before
diff --git a/arch/x86/include/asm/fpu/api.h b/arch/x86/include/asm/fpu/api.h
index 73e684160f354..fc3dd044e16dd 100644
--- a/arch/x86/include/asm/fpu/api.h
+++ b/arch/x86/include/asm/fpu/api.h
@@ -10,7 +10,7 @@
 
 #ifndef _ASM_X86_FPU_API_H
 #define _ASM_X86_FPU_API_H
-#include <linux/preempt.h>
+#include <linux/bottom_half.h>
 
 /*
  * Use kernel_fpu_begin/end() if you intend to use FPU in kernel context. It
@@ -22,17 +22,37 @@
 extern void kernel_fpu_begin(void);
 extern void kernel_fpu_end(void);
 extern bool irq_fpu_usable(void);
+extern void fpregs_mark_activate(void);
 
+/*
+ * Use fpregs_lock() while editing CPU's FPU registers or fpu->state.
+ * A context switch will (and softirq might) save CPU's FPU register to
+ * fpu->state and set TIF_NEED_FPU_LOAD leaving CPU's FPU registers in a random
+ * state.
+ */
 static inline void fpregs_lock(void)
 {
 	preempt_disable();
+	local_bh_disable();
 }
 
 static inline void fpregs_unlock(void)
 {
+	local_bh_enable();
 	preempt_enable();
 }
 
+#ifdef CONFIG_X86_DEBUG_FPU
+extern void fpregs_assert_state_consistent(void);
+#else
+static inline void fpregs_assert_state_consistent(void) { }
+#endif
+
+/*
+ * Load the task FPU state before returning to userspace.
+ */
+extern void switch_fpu_return(void);
+
 /*
  * Query the presence of one or more xfeatures. Works on any legacy CPU as well.
  *
diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 037472d0be140..7a143b86d3a65 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -30,7 +30,7 @@ extern void fpu__prepare_write(struct fpu *fpu);
 extern void fpu__save(struct fpu *fpu);
 extern int  fpu__restore_sig(void __user *buf, int ia32_frame);
 extern void fpu__drop(struct fpu *fpu);
-extern int  fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu);
+extern int  fpu__copy(struct task_struct *dst, struct task_struct *src);
 extern void fpu__clear(struct fpu *fpu);
 extern int  fpu__exception_code(struct fpu *fpu, int trap_nr);
 extern int  dump_fpu(struct pt_regs *ptregs, struct user_i387_struct *fpstate);
@@ -528,13 +528,20 @@ static inline void fpregs_activate(struct fpu *fpu)
 	trace_x86_fpu_regs_activated(fpu);
 }
 
-static inline void __fpregs_load_activate(struct fpu *fpu, int cpu)
+static inline void __fpregs_load_activate(void)
 {
+	struct fpu *fpu = &current->thread.fpu;
+	int cpu = smp_processor_id();
+
+	if (WARN_ON_ONCE(current->mm == NULL))
+		return;
+
 	if (!fpregs_state_valid(fpu, cpu)) {
-		if (current->mm)
-			copy_kernel_to_fpregs(&fpu->state);
+		copy_kernel_to_fpregs(&fpu->state);
 		fpregs_activate(fpu);
+		fpu->last_cpu = cpu;
 	}
+	clear_thread_flag(TIF_NEED_FPU_LOAD);
 }
 
 /*
@@ -545,8 +552,8 @@ static inline void __fpregs_load_activate(struct fpu *fpu, int cpu)
  *  - switch_fpu_prepare() saves the old state.
  *    This is done within the context of the old process.
  *
- *  - switch_fpu_finish() restores the new state as
- *    necessary.
+ *  - switch_fpu_finish() sets TIF_NEED_FPU_LOAD; the floating point state
+ *    will get loaded on return to userspace, or when the kernel needs it.
  *
  * The FPU context is only stored/restore for user task and ->mm is used to
  * distinguish between kernel and user threads.
@@ -576,10 +583,10 @@ switch_fpu_prepare(struct fpu *old_fpu, int cpu)
  */
 
 /*
- * Set up the userspace FPU context for the new task, if the task
- * has used the FPU.
+ * Load PKRU from the FPU context if available. Delay loading the loading of the
+ * complete FPU state until the return to userland.
  */
-static inline void switch_fpu_finish(struct fpu *new_fpu, int cpu)
+static inline void switch_fpu_finish(struct fpu *new_fpu)
 {
 	struct pkru_state *pk;
 	u32 pkru_val = init_pkru_value;
@@ -587,7 +594,7 @@ static inline void switch_fpu_finish(struct fpu *new_fpu, int cpu)
 	if (!static_cpu_has(X86_FEATURE_FPU))
 		return;
 
-	__fpregs_load_activate(new_fpu, cpu);
+	set_thread_flag(TIF_NEED_FPU_LOAD);
 
 	if (!cpu_feature_enabled(X86_FEATURE_OSPKE))
 		return;
diff --git a/arch/x86/include/asm/trace/fpu.h b/arch/x86/include/asm/trace/fpu.h
index bd65f6ba950f8..91a1422091ceb 100644
--- a/arch/x86/include/asm/trace/fpu.h
+++ b/arch/x86/include/asm/trace/fpu.h
@@ -13,19 +13,22 @@ DECLARE_EVENT_CLASS(x86_fpu,
 
 	TP_STRUCT__entry(
 		__field(struct fpu *, fpu)
+		__field(bool, load_fpu)
 		__field(u64, xfeatures)
 		__field(u64, xcomp_bv)
 		),
 
 	TP_fast_assign(
 		__entry->fpu		= fpu;
+		__entry->load_fpu	= test_thread_flag(TIF_NEED_FPU_LOAD);
 		if (boot_cpu_has(X86_FEATURE_OSXSAVE)) {
 			__entry->xfeatures = fpu->state.xsave.header.xfeatures;
 			__entry->xcomp_bv  = fpu->state.xsave.header.xcomp_bv;
 		}
 	),
-	TP_printk("x86/fpu: %p xfeatures: %llx xcomp_bv: %llx",
+	TP_printk("x86/fpu: %p load: %d xfeatures: %llx xcomp_bv: %llx",
 			__entry->fpu,
+			__entry->load_fpu,
 			__entry->xfeatures,
 			__entry->xcomp_bv
 	)
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 739ca3ae2bdcd..7d68404a88d52 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -102,23 +102,20 @@ static void __kernel_fpu_begin(void)
 	kernel_fpu_disable();
 
 	if (current->mm) {
-		/*
-		 * Ignore return value -- we don't care if reg state
-		 * is clobbered.
-		 */
-		copy_fpregs_to_fpstate(fpu);
-	} else {
-		__cpu_invalidate_fpregs_state();
+		if (!test_thread_flag(TIF_NEED_FPU_LOAD)) {
+			set_thread_flag(TIF_NEED_FPU_LOAD);
+			/*
+			 * Ignore return value -- we don't care if reg state
+			 * is clobbered.
+			 */
+			copy_fpregs_to_fpstate(fpu);
+		}
 	}
+	__cpu_invalidate_fpregs_state();
 }
 
 static void __kernel_fpu_end(void)
 {
-	struct fpu *fpu = &current->thread.fpu;
-
-	if (current->mm)
-		copy_kernel_to_fpregs(&fpu->state);
-
 	kernel_fpu_enable();
 }
 
@@ -145,14 +142,17 @@ void fpu__save(struct fpu *fpu)
 {
 	WARN_ON_FPU(fpu != &current->thread.fpu);
 
-	preempt_disable();
+	fpregs_lock();
 	trace_x86_fpu_before_save(fpu);
 
-	if (!copy_fpregs_to_fpstate(fpu))
-		copy_kernel_to_fpregs(&fpu->state);
+	if (!test_thread_flag(TIF_NEED_FPU_LOAD)) {
+		if (!copy_fpregs_to_fpstate(fpu)) {
+			copy_kernel_to_fpregs(&fpu->state);
+		}
+	}
 
 	trace_x86_fpu_after_save(fpu);
-	preempt_enable();
+	fpregs_unlock();
 }
 EXPORT_SYMBOL_GPL(fpu__save);
 
@@ -185,8 +185,11 @@ void fpstate_init(union fpregs_state *state)
 }
 EXPORT_SYMBOL_GPL(fpstate_init);
 
-int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu)
+int fpu__copy(struct task_struct *dst, struct task_struct *src)
 {
+	struct fpu *dst_fpu = &dst->thread.fpu;
+	struct fpu *src_fpu = &src->thread.fpu;
+
 	dst_fpu->last_cpu = -1;
 
 	if (!static_cpu_has(X86_FEATURE_FPU))
@@ -201,16 +204,23 @@ int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu)
 	memset(&dst_fpu->state.xsave, 0, fpu_kernel_xstate_size);
 
 	/*
-	 * Save current FPU registers directly into the child
-	 * FPU context, without any memory-to-memory copying.
+	 * If the FPU registers are not current just memcpy() the state.
+	 * Otherwise save current FPU registers directly into the child's FPU
+	 * context, without any memory-to-memory copying.
 	 *
 	 * ( The function 'fails' in the FNSAVE case, which destroys
-	 *   register contents so we have to copy them back. )
+	 *   register contents so we have to load them back. )
 	 */
-	if (!copy_fpregs_to_fpstate(dst_fpu)) {
-		memcpy(&src_fpu->state, &dst_fpu->state, fpu_kernel_xstate_size);
-		copy_kernel_to_fpregs(&src_fpu->state);
-	}
+	fpregs_lock();
+	if (test_thread_flag(TIF_NEED_FPU_LOAD))
+		memcpy(&dst_fpu->state, &src_fpu->state, fpu_kernel_xstate_size);
+
+	else if (!copy_fpregs_to_fpstate(dst_fpu))
+		copy_kernel_to_fpregs(&dst_fpu->state);
+
+	fpregs_unlock();
+
+	set_tsk_thread_flag(dst, TIF_NEED_FPU_LOAD);
 
 	trace_x86_fpu_copy_src(src_fpu);
 	trace_x86_fpu_copy_dst(dst_fpu);
@@ -226,10 +236,9 @@ static void fpu__initialize(struct fpu *fpu)
 {
 	WARN_ON_FPU(fpu != &current->thread.fpu);
 
+	set_thread_flag(TIF_NEED_FPU_LOAD);
 	fpstate_init(&fpu->state);
 	trace_x86_fpu_init_state(fpu);
-
-	trace_x86_fpu_activate_state(fpu);
 }
 
 /*
@@ -308,6 +317,8 @@ void fpu__drop(struct fpu *fpu)
  */
 static inline void copy_init_fpstate_to_fpregs(void)
 {
+	fpregs_lock();
+
 	if (use_xsave())
 		copy_kernel_to_xregs(&init_fpstate.xsave, -1);
 	else if (static_cpu_has(X86_FEATURE_FXSR))
@@ -317,6 +328,9 @@ static inline void copy_init_fpstate_to_fpregs(void)
 
 	if (boot_cpu_has(X86_FEATURE_OSPKE))
 		copy_init_pkru_to_fpregs();
+
+	fpregs_mark_activate();
+	fpregs_unlock();
 }
 
 /*
@@ -339,6 +353,45 @@ void fpu__clear(struct fpu *fpu)
 		copy_init_fpstate_to_fpregs();
 }
 
+/*
+ * Load FPU context before returning to userspace.
+ */
+void switch_fpu_return(void)
+{
+	if (!static_cpu_has(X86_FEATURE_FPU))
+		return;
+
+	__fpregs_load_activate();
+}
+EXPORT_SYMBOL_GPL(switch_fpu_return);
+
+#ifdef CONFIG_X86_DEBUG_FPU
+/*
+ * If current FPU state according to its tracking (loaded FPU ctx on this CPU)
+ * is not valid then we must have TIF_NEED_FPU_LOAD set so the context is loaded on
+ * return to userland.
+ */
+void fpregs_assert_state_consistent(void)
+{
+       struct fpu *fpu = &current->thread.fpu;
+
+       if (test_thread_flag(TIF_NEED_FPU_LOAD))
+               return;
+       WARN_ON_FPU(!fpregs_state_valid(fpu, smp_processor_id()));
+}
+EXPORT_SYMBOL_GPL(fpregs_assert_state_consistent);
+#endif
+
+void fpregs_mark_activate(void)
+{
+	struct fpu *fpu = &current->thread.fpu;
+
+	fpregs_activate(fpu);
+	fpu->last_cpu = smp_processor_id();
+	clear_thread_flag(TIF_NEED_FPU_LOAD);
+}
+EXPORT_SYMBOL_GPL(fpregs_mark_activate);
+
 /*
  * x87 math exception handling:
  */
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 2421fb17f643d..a5b086ec426a5 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -269,11 +269,9 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 	struct fpu *fpu = &tsk->thread.fpu;
 	int state_size = fpu_kernel_xstate_size;
 	struct user_i387_ia32_struct env;
-	union fpregs_state *state;
 	u64 xfeatures = 0;
 	int fx_only = 0;
 	int ret = 0;
-	void *tmp;
 
 	ia32_fxstate &= (IS_ENABLED(CONFIG_X86_32) ||
 			 IS_ENABLED(CONFIG_IA32_EMULATION));
@@ -308,14 +306,18 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		}
 	}
 
-	tmp = kzalloc(sizeof(*state) + fpu_kernel_xstate_size + 64, GFP_KERNEL);
-	if (!tmp)
-		return -ENOMEM;
-	state = PTR_ALIGN(tmp, 64);
+	/*
+	 * The current state of the FPU registers does not matter. By setting
+	 * TIF_NEED_FPU_LOAD unconditionally it is ensured that the our xstate
+	 * is not modified on context switch and that the xstate is considered
+	 * to loaded again on return to userland (overriding last_cpu avoids the
+	 * optimisation).
+	 */
+	set_thread_flag(TIF_NEED_FPU_LOAD);
+	__fpu_invalidate_fpregs_state(fpu);
 
 	if ((unsigned long)buf_fx % 64)
 		fx_only = 1;
-
 	/*
 	 * For 32-bit frames with fxstate, copy the fxstate so it can be
 	 * reconstructed later.
@@ -330,43 +332,51 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		u64 init_bv = xfeatures_mask & ~xfeatures;
 
 		if (using_compacted_format()) {
-			ret = copy_user_to_xstate(&state->xsave, buf_fx);
+			ret = copy_user_to_xstate(&fpu->state.xsave, buf_fx);
 		} else {
-			ret = __copy_from_user(&state->xsave, buf_fx, state_size);
+			ret = __copy_from_user(&fpu->state.xsave, buf_fx, state_size);
 
 			if (!ret && state_size > offsetof(struct xregs_state, header))
-				ret = validate_xstate_header(&state->xsave.header);
+				ret = validate_xstate_header(&fpu->state.xsave.header);
 		}
 		if (ret)
 			goto err_out;
 
-		sanitize_restored_xstate(state, envp, xfeatures, fx_only);
+		sanitize_restored_xstate(&fpu->state, envp, xfeatures, fx_only);
 
+		fpregs_lock();
 		if (unlikely(init_bv))
 			copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
-		ret = copy_kernel_to_xregs_err(&state->xsave, xfeatures);
+		ret = copy_kernel_to_xregs_err(&fpu->state.xsave, xfeatures);
 
 	} else if (use_fxsr()) {
-		ret = __copy_from_user(&state->fxsave, buf_fx, state_size);
-		if (ret)
+		ret = __copy_from_user(&fpu->state.fxsave, buf_fx, state_size);
+		if (ret) {
+			ret = -EFAULT;
 			goto err_out;
+		}
 
-		sanitize_restored_xstate(state, envp, xfeatures, fx_only);
+		sanitize_restored_xstate(&fpu->state, envp, xfeatures, fx_only);
+
+		fpregs_lock();
 		if (use_xsave()) {
 			u64 init_bv = xfeatures_mask & ~XFEATURE_MASK_FPSSE;
 			copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
 		}
 
-		ret = copy_kernel_to_fxregs_err(&state->fxsave);
+		ret = copy_kernel_to_fxregs_err(&fpu->state.fxsave);
 	} else {
-		ret = __copy_from_user(&state->fsave, buf_fx, state_size);
+		ret = __copy_from_user(&fpu->state.fsave, buf_fx, state_size);
 		if (ret)
 			goto err_out;
-		ret = copy_kernel_to_fregs_err(&state->fsave);
+		fpregs_lock();
+		ret = copy_kernel_to_fregs_err(&fpu->state.fsave);
 	}
+	if (!ret)
+		fpregs_mark_activate();
+	fpregs_unlock();
 
 err_out:
-	kfree(tmp);
 	if (ret)
 		fpu__clear(fpu);
 	return ret;
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 58ac7be52c7a6..b9b8e6eb74f27 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -101,7 +101,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	dst->thread.vm86 = NULL;
 #endif
 
-	return fpu__copy(&dst->thread.fpu, &src->thread.fpu);
+	return fpu__copy(dst, src);
 }
 
 /*
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 77d9eb43ccac8..1bc47f3a48854 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -234,7 +234,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
 
-	switch_fpu_prepare(prev_fpu, cpu);
+	if (!test_thread_flag(TIF_NEED_FPU_LOAD))
+		switch_fpu_prepare(prev_fpu, cpu);
 
 	/*
 	 * Save away %gs. No need to save %fs, as it was saved on the
@@ -290,7 +291,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	this_cpu_write(current_task, next_p);
 
-	switch_fpu_finish(next_fpu, cpu);
+	switch_fpu_finish(next_fpu);
 
 	/* Load the Intel cache allocation PQR MSR. */
 	resctrl_sched_in();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ffea7c557963a..37b2ecef041e6 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -520,7 +520,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_DEBUG_ENTRY) &&
 		     this_cpu_read(irq_count) != -1);
 
-	switch_fpu_prepare(prev_fpu, cpu);
+	if (!test_thread_flag(TIF_NEED_FPU_LOAD))
+		switch_fpu_prepare(prev_fpu, cpu);
 
 	/* We must save %fs and %gs before load_TLS() because
 	 * %fs and %gs may be cleared by load_TLS().
@@ -572,7 +573,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	this_cpu_write(current_task, next_p);
 	this_cpu_write(cpu_current_top_of_stack, task_top_of_stack(next_p));
 
-	switch_fpu_finish(next_fpu, cpu);
+	switch_fpu_finish(next_fpu);
 
 	/* Reload sp0. */
 	update_task_stack(next_p);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8022e7769b3a1..e340c3c0cba32 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7877,6 +7877,10 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		wait_lapic_expire(vcpu);
 	guest_enter_irqoff();
 
+	fpregs_assert_state_consistent();
+	if (test_thread_flag(TIF_NEED_FPU_LOAD))
+		switch_fpu_return();
+
 	if (unlikely(vcpu->arch.switch_db_regs)) {
 		set_debugreg(0, 7);
 		set_debugreg(vcpu->arch.eff_db[0], 0);
@@ -8137,22 +8141,30 @@ static int complete_emulated_mmio(struct kvm_vcpu *vcpu)
 /* Swap (qemu) user FPU context for the guest FPU context. */
 static void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 {
-	preempt_disable();
+	fpregs_lock();
+
 	copy_fpregs_to_fpstate(&current->thread.fpu);
 	/* PKRU is separately restored in kvm_x86_ops->run.  */
 	__copy_kernel_to_fpregs(&vcpu->arch.guest_fpu->state,
 				~XFEATURE_MASK_PKRU);
-	preempt_enable();
+
+	fpregs_mark_activate();
+	fpregs_unlock();
+
 	trace_kvm_fpu(1);
 }
 
 /* When vcpu_run ends, restore user space FPU context. */
 static void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 {
-	preempt_disable();
+	fpregs_lock();
+
 	copy_fpregs_to_fpstate(vcpu->arch.guest_fpu);
 	copy_kernel_to_fpregs(&current->thread.fpu.state);
-	preempt_enable();
+
+	fpregs_mark_activate();
+	fpregs_unlock();
+
 	++vcpu->stat.fpu_reload;
 	trace_kvm_fpu(0);
 }
-- 
2.20.1


  parent reply	other threads:[~2019-04-03 16:43 UTC|newest]

Thread overview: 83+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-03 16:41 [PATCH v9 00/27] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 01/27] x86/fpu: Remove fpu->initialized usage in __fpu__restore_sig() Sebastian Andrzej Siewior
2019-04-13 20:46   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 02/27] x86/fpu: Remove fpu__restore() Sebastian Andrzej Siewior
2019-04-13 20:47   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 03/27] x86/fpu: Remove preempt_disable() in fpu__clear() Sebastian Andrzej Siewior
2019-04-13 20:48   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 04/27] x86/fpu: Always init the `state' " Sebastian Andrzej Siewior
2019-04-13 20:48   ` [tip:x86/fpu] x86/fpu: Always init the state " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 05/27] x86/fpu: Remove fpu->initialized usage in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
2019-04-13 20:49   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 06/27] x86/fpu: Don't save fxregs for ia32 frames " Sebastian Andrzej Siewior
2019-04-13 20:50   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 07/27] x86/fpu: Remove fpu->initialized Sebastian Andrzej Siewior
2019-04-13 20:50   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 08/27] x86/fpu: Remove user_fpu_begin() Sebastian Andrzej Siewior
2019-04-13 20:51   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 09/27] x86/fpu: Add (__)make_fpregs_active helpers Sebastian Andrzej Siewior
2019-04-13 20:52   ` [tip:x86/fpu] x86/fpu: Add an __fpregs_load_activate() internal helper tip-bot for Rik van Riel
2019-04-03 16:41 ` [PATCH 10/27] x86/fpu: Make __raw_xsave_addr() use feature number instead of mask Sebastian Andrzej Siewior
2019-04-13 20:52   ` [tip:x86/fpu] x86/fpu: Make __raw_xsave_addr() use a " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 11/27] x86/fpu: Make get_xsave_field_ptr() and get_xsave_addr() use " Sebastian Andrzej Siewior
2019-04-13 20:53   ` [tip:x86/fpu] x86/fpu: Use a feature number instead of mask in two more helpers tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 12/27] x86/pkru: Provide .*_pkru_ins() functions Sebastian Andrzej Siewior
2019-04-10 16:36   ` Borislav Petkov
2019-04-10 16:52     ` Borislav Petkov
2019-04-10 21:25       ` Sebastian Andrzej Siewior
2019-04-10 21:29         ` Dave Hansen
2019-04-11 13:24           ` Borislav Petkov
2019-04-13 20:54   ` [tip:x86/fpu] x86/pkeys: Provide *pkru() helpers tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 13/27] x86/fpu: Only write PKRU if it is different from current Sebastian Andrzej Siewior
2019-04-13 20:55   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 14/27] x86/pkeys: Don't check if PKRU is zero before writting it Sebastian Andrzej Siewior
2019-04-13 20:55   ` [tip:x86/fpu] x86/pkeys: Don't check if PKRU is zero before writing it tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 15/27] x86/fpu: Eager switch PKRU state Sebastian Andrzej Siewior
2019-04-13 20:56   ` [tip:x86/fpu] " tip-bot for Rik van Riel
2019-04-03 16:41 ` [PATCH 16/27] x86/entry: Add TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
2019-04-13 20:57   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 17/27] x86/fpu: Always store the registers in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
2019-04-13 20:57   ` [tip:x86/fpu] " tip-bot for Rik van Riel
2019-04-03 16:41 ` [PATCH 18/27] x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
2019-04-13 20:58   ` [tip:x86/fpu] " tip-bot for Rik van Riel
2019-04-03 16:41 ` [PATCH 19/27] x86/fpu: Update xstate's PKRU value on write_pkru() Sebastian Andrzej Siewior
2019-04-08 18:14   ` Dave Hansen
2019-04-08 20:03     ` Sebastian Andrzej Siewior
2019-04-13 20:59   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 20/27] x86/fpu: Inline copy_user_to_fpregs_zeroing() Sebastian Andrzej Siewior
2019-04-13 21:00   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 21/27] x86/fpu: Let __fpu__restore_sig() restore the !32bit+fxsr frame from kernel memory Sebastian Andrzej Siewior
2019-04-13 21:00   ` [tip:x86/fpu] x86/fpu: Restore from kernel memory on the 64-bit path too tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 22/27] x86/fpu: Merge the two code paths in __fpu__restore_sig() Sebastian Andrzej Siewior
2019-04-13 21:01   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` Sebastian Andrzej Siewior [this message]
2019-04-12 14:36   ` [PATCH 23/27] x86/fpu: Defer FPU state load until return to userspace Borislav Petkov
2019-04-12 15:24     ` Sebastian Andrzej Siewior
2019-04-12 16:22       ` Borislav Petkov
2019-04-12 16:37         ` Sebastian Andrzej Siewior
2019-04-12 16:48           ` Borislav Petkov
2019-04-12 17:19             ` Sebastian Andrzej Siewior
2019-04-12 17:29               ` Borislav Petkov
2019-04-15  9:14                 ` Sebastian Andrzej Siewior
2019-04-13 21:02   ` [tip:x86/fpu] " tip-bot for Rik van Riel
2019-04-03 16:41 ` [PATCH 24/27] x86/fpu: Add a fastpath to __fpu__restore_sig() Sebastian Andrzej Siewior
2019-04-08 17:05   ` Thomas Gleixner
2019-04-08 20:02     ` Sebastian Andrzej Siewior
2019-04-09  7:27       ` Thomas Gleixner
2019-04-12 17:17   ` Borislav Petkov
2019-04-12 17:27     ` Sebastian Andrzej Siewior
2019-04-13 21:02   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 25/27] x86/fpu: Add a fastpath to copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
2019-04-13 21:03   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 26/27] x86/fpu: Restore FPU register in copy_fpstate_to_sigframe() in order to use the fastpath Sebastian Andrzej Siewior
2019-04-13 21:04   ` [tip:x86/fpu] x86/fpu: Restore regs " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 27/27] x86/pkeys: add PKRU value to init_fpstate Sebastian Andrzej Siewior
2019-04-13 21:05   ` [tip:x86/fpu] x86/pkeys: Add " tip-bot for Sebastian Andrzej Siewior
2019-04-04 14:01 ` [PATCH v9 00/27] x86: load FPU registers on return to userland David Laight
2019-04-04 14:14   ` 'Sebastian Andrzej Siewior'
2019-04-04 14:26     ` Andy Lutomirski
2019-04-04 14:31       ` Sebastian Andrzej Siewior
2019-04-04 15:10       ` David Laight
2019-04-08 17:08 ` Thomas Gleixner
2019-04-12 18:30 ` Borislav Petkov
2019-04-15  8:58   ` Sebastian Andrzej Siewior

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190403164156.19645-24-bigeasy@linutronix.de \
    --to=bigeasy@linutronix.de \
    --cc=Jason@zx2c4.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=riel@surriel.com \
    --cc=rkrcmar@redhat.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.