All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
To: Igor Mitsyanko <imitsyanko@quantenna.com>,
	Avinash Patil <avinashp@quantenna.com>,
	Sergey Matyukevich <smatyukevich@quantenna.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Gustavo A. R. Silva" <gustavo@embeddedor.com>
Subject: [PATCH][next] qtnfmac: replace qtnf_cmd_acl_data_size() with struct_size()
Date: Wed, 3 Apr 2019 12:02:36 -0500	[thread overview]
Message-ID: <20190403170236.GA31637@embeddedor> (raw)

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kzalloc(size, GFP_KERNEL)

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

size = struct_size(instance, entry, count);

or

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL)

Based on the above, replace qtnf_cmd_acl_data_size() with the
new struct_size() helper.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
 drivers/net/wireless/quantenna/qtnfmac/commands.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/quantenna/qtnfmac/commands.c b/drivers/net/wireless/quantenna/qtnfmac/commands.c
index 85a2a58f4c16..534d5a4d06fb 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/commands.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/commands.c
@@ -177,14 +177,6 @@ static void qtnf_cmd_tlv_ie_set_add(struct sk_buff *cmd_skb, u8 frame_type,
 		memcpy(tlv->ie_data, buf, len);
 }
 
-static inline size_t qtnf_cmd_acl_data_size(const struct cfg80211_acl_data *acl)
-{
-	size_t size = sizeof(struct qlink_acl_data) +
-		      acl->n_acl_entries * sizeof(struct qlink_mac_address);
-
-	return size;
-}
-
 static bool qtnf_cmd_start_ap_can_fit(const struct qtnf_vif *vif,
 				      const struct cfg80211_ap_settings *s)
 {
@@ -203,7 +195,7 @@ static bool qtnf_cmd_start_ap_can_fit(const struct qtnf_vif *vif,
 
 	if (s->acl)
 		len += sizeof(struct qlink_tlv_hdr) +
-		       qtnf_cmd_acl_data_size(s->acl);
+		       struct_size(s->acl, mac_addrs, s->acl->n_acl_entries);
 
 	if (len > (sizeof(struct qlink_cmd) + QTNF_MAX_CMD_BUF_SIZE)) {
 		pr_err("VIF%u.%u: can not fit AP settings: %u\n",
@@ -310,7 +302,8 @@ int qtnf_cmd_send_start_ap(struct qtnf_vif *vif,
 	}
 
 	if (s->acl) {
-		size_t acl_size = qtnf_cmd_acl_data_size(s->acl);
+		size_t acl_size = struct_size(s->acl, mac_addrs,
+					      s->acl->n_acl_entries);
 		struct qlink_tlv_hdr *tlv =
 			skb_put(cmd_skb, sizeof(*tlv) + acl_size);
 
@@ -2592,7 +2585,7 @@ int qtnf_cmd_set_mac_acl(const struct qtnf_vif *vif,
 	struct qtnf_bus *bus = vif->mac->bus;
 	struct sk_buff *cmd_skb;
 	struct qlink_tlv_hdr *tlv;
-	size_t acl_size = qtnf_cmd_acl_data_size(params);
+	size_t acl_size = struct_size(params, mac_addrs, params->n_acl_entries);
 	int ret;
 
 	cmd_skb = qtnf_cmd_alloc_new_cmdskb(vif->mac->macid, vif->vifid,
-- 
2.21.0


             reply	other threads:[~2019-04-03 17:47 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-03 17:02 Gustavo A. R. Silva [this message]
2019-04-04 13:32 ` [PATCH][next] qtnfmac: replace qtnf_cmd_acl_data_size() with struct_size() Sergey Matyukevich
2019-04-04 16:01   ` Gustavo A. R. Silva
2019-04-04 16:33     ` Gustavo A. R. Silva
2019-04-04 16:40       ` Kalle Valo
2019-04-04 16:45         ` Gustavo A. R. Silva
2019-04-04 16:38 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190403170236.GA31637@embeddedor \
    --to=gustavo@embeddedor.com \
    --cc=avinashp@quantenna.com \
    --cc=davem@davemloft.net \
    --cc=imitsyanko@quantenna.com \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=smatyukevich@quantenna.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.