All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/2] dt-bindings: phy-imx8mq-usb: add optional vbus supply regulator
@ 2019-04-04 16:41 ` Lucas Stach
  0 siblings, 0 replies; 4+ messages in thread
From: Lucas Stach @ 2019-04-04 16:41 UTC (permalink / raw)
  To: Kishon Vijay Abraham I, Rob Herring
  Cc: devicetree, patchwork-lst, NXP Linux Team, kernel,
	linux-arm-kernel, Li Jun

Add a vbus supply regulator phandle, so the PHY can enable the VBUS
voltage rail when powering up.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
index a22e853d710c..ed47e5cd067e 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
@@ -7,6 +7,9 @@ Required properties:
 - clocks:	phandles to the clocks for each clock listed in clock-names
 - clock-names:	must contain "phy"
 
+Optional properties:
+- vbus-supply: A phandle to the regulator for USB VBUS.
+
 Example:
 	usb3_phy0: phy@381f0040 {
 		compatible = "fsl,imx8mq-usb-phy";
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH 1/2] dt-bindings: phy-imx8mq-usb: add optional vbus supply regulator
@ 2019-04-04 16:41 ` Lucas Stach
  0 siblings, 0 replies; 4+ messages in thread
From: Lucas Stach @ 2019-04-04 16:41 UTC (permalink / raw)
  To: Kishon Vijay Abraham I, Rob Herring
  Cc: devicetree, patchwork-lst, NXP Linux Team, kernel,
	linux-arm-kernel, Li Jun

Add a vbus supply regulator phandle, so the PHY can enable the VBUS
voltage rail when powering up.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
index a22e853d710c..ed47e5cd067e 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
@@ -7,6 +7,9 @@ Required properties:
 - clocks:	phandles to the clocks for each clock listed in clock-names
 - clock-names:	must contain "phy"
 
+Optional properties:
+- vbus-supply: A phandle to the regulator for USB VBUS.
+
 Example:
 	usb3_phy0: phy@381f0040 {
 		compatible = "fsl,imx8mq-usb-phy";
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH 2/2] phy: fsl-imx8mq-usb: add support for VBUS power control
  2019-04-04 16:41 ` Lucas Stach
@ 2019-04-04 16:41   ` Lucas Stach
  -1 siblings, 0 replies; 4+ messages in thread
From: Lucas Stach @ 2019-04-04 16:41 UTC (permalink / raw)
  To: Kishon Vijay Abraham I, Rob Herring
  Cc: devicetree, patchwork-lst, NXP Linux Team, kernel,
	linux-arm-kernel, Li Jun

This adds support to the PHY driver to power up/down the VBUS
voltage rail at the appropriate times.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
index d6ea5ce8afa5..0a3e88e37ab5 100644
--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -6,6 +6,7 @@
 #include <linux/module.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #define PHY_CTRL0			0x0
 #define PHY_CTRL0_REF_SSP_EN		BIT(2)
@@ -24,6 +25,7 @@ struct imx8mq_usb_phy {
 	struct phy *phy;
 	struct clk *clk;
 	void __iomem *base;
+	struct regulator *vbus;
 };
 
 static int imx8mq_usb_phy_init(struct phy *phy)
@@ -55,6 +57,11 @@ static int imx8mq_usb_phy_init(struct phy *phy)
 static int imx8mq_phy_power_on(struct phy *phy)
 {
 	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = regulator_enable(imx_phy->vbus);
+	if (ret)
+		return ret;
 
 	return clk_prepare_enable(imx_phy->clk);
 }
@@ -64,6 +71,7 @@ static int imx8mq_phy_power_off(struct phy *phy)
 	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
 
 	clk_disable_unprepare(imx_phy->clk);
+	regulator_disable(imx_phy->vbus);
 
 	return 0;
 }
@@ -101,6 +109,11 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(imx_phy->phy))
 		return PTR_ERR(imx_phy->phy);
 
+	imx_phy->vbus = devm_regulator_get(dev, "vbus");
+	if (IS_ERR(imx_phy->vbus))
+		return PTR_ERR(imx_phy->vbus);
+
+
 	phy_set_drvdata(imx_phy->phy, imx_phy);
 
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH 2/2] phy: fsl-imx8mq-usb: add support for VBUS power control
@ 2019-04-04 16:41   ` Lucas Stach
  0 siblings, 0 replies; 4+ messages in thread
From: Lucas Stach @ 2019-04-04 16:41 UTC (permalink / raw)
  To: Kishon Vijay Abraham I, Rob Herring
  Cc: devicetree, patchwork-lst, NXP Linux Team, kernel,
	linux-arm-kernel, Li Jun

This adds support to the PHY driver to power up/down the VBUS
voltage rail at the appropriate times.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
index d6ea5ce8afa5..0a3e88e37ab5 100644
--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -6,6 +6,7 @@
 #include <linux/module.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #define PHY_CTRL0			0x0
 #define PHY_CTRL0_REF_SSP_EN		BIT(2)
@@ -24,6 +25,7 @@ struct imx8mq_usb_phy {
 	struct phy *phy;
 	struct clk *clk;
 	void __iomem *base;
+	struct regulator *vbus;
 };
 
 static int imx8mq_usb_phy_init(struct phy *phy)
@@ -55,6 +57,11 @@ static int imx8mq_usb_phy_init(struct phy *phy)
 static int imx8mq_phy_power_on(struct phy *phy)
 {
 	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = regulator_enable(imx_phy->vbus);
+	if (ret)
+		return ret;
 
 	return clk_prepare_enable(imx_phy->clk);
 }
@@ -64,6 +71,7 @@ static int imx8mq_phy_power_off(struct phy *phy)
 	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
 
 	clk_disable_unprepare(imx_phy->clk);
+	regulator_disable(imx_phy->vbus);
 
 	return 0;
 }
@@ -101,6 +109,11 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(imx_phy->phy))
 		return PTR_ERR(imx_phy->phy);
 
+	imx_phy->vbus = devm_regulator_get(dev, "vbus");
+	if (IS_ERR(imx_phy->vbus))
+		return PTR_ERR(imx_phy->vbus);
+
+
 	phy_set_drvdata(imx_phy->phy, imx_phy);
 
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-04-04 16:42 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-04 16:41 [PATCH 1/2] dt-bindings: phy-imx8mq-usb: add optional vbus supply regulator Lucas Stach
2019-04-04 16:41 ` Lucas Stach
2019-04-04 16:41 ` [PATCH 2/2] phy: fsl-imx8mq-usb: add support for VBUS power control Lucas Stach
2019-04-04 16:41   ` Lucas Stach

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.