All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: hverkuil@xs4all.nl, niklas.soderlund@ragnatech.se,
	laurent.pinchart@ideasonboard.com
Subject: [PATCH 9/9] ipu3-cio2: Parse information from firmware without using callbacks
Date: Fri,  5 Apr 2019 12:41:27 +0300	[thread overview]
Message-ID: <20190405094127.18975-11-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20190405094127.18975-1-sakari.ailus@linux.intel.com>

Instead of using the convenience function
v4l2_async_notifier_parse_fwnode_endpoints(), parse the endpoints and set
up the async sub-devices without using callbacks. While this adds a little
bit of code, it makes parsing the endpoints quite a bit more simple and
gives more control to the driver over the process. The parsing assumes
D-PHY instead of letting the V4L2 fwnode framework guess it.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/pci/intel/ipu3/ipu3-cio2.c | 92 +++++++++++++++++---------------
 1 file changed, 49 insertions(+), 43 deletions(-)

diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
index 6fa995687314..510b7769e5aa 100644
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
@@ -1475,36 +1475,51 @@ static const struct v4l2_async_notifier_operations cio2_async_ops = {
 	.complete = cio2_notifier_complete,
 };
 
-static int cio2_fwnode_parse(struct device *dev,
-			     struct v4l2_fwnode_endpoint *vep,
-			     struct v4l2_async_subdev *asd)
+static int cio2_parse_firmware(struct cio2_device *cio2)
 {
-	struct sensor_async_subdev *s_asd =
-			container_of(asd, struct sensor_async_subdev, asd);
+	unsigned int i;
+	int ret;
 
-	if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
-		dev_err(dev, "Only CSI2 bus type is currently supported\n");
-		return -EINVAL;
-	}
+	for (i = 0; i < CIO2_NUM_PORTS; i++) {
+		struct v4l2_fwnode_endpoint vep = {
+			.bus_type = V4L2_MBUS_CSI2_DPHY
+		};
+		struct sensor_async_subdev *s_asd = NULL;
+		struct fwnode_handle *ep;
 
-	s_asd->csi2.port = vep->base.port;
-	s_asd->csi2.lanes = vep->bus.mipi_csi2.num_data_lanes;
+		ep = fwnode_graph_get_endpoint_by_id(
+			dev_fwnode(&cio2->pci_dev->dev), i, 0,
+			FWNODE_GRAPH_ENDPOINT_NEXT);
 
-	return 0;
-}
+		if (!ep)
+			continue;
 
-static int cio2_notifier_init(struct cio2_device *cio2)
-{
-	int ret;
+		ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+		if (ret)
+			goto err_parse;
 
-	v4l2_async_notifier_init(&cio2->notifier);
+		s_asd = kzalloc(sizeof(*s_asd), GFP_KERNEL);
+		if (!s_asd) {
+			ret = -ENOMEM;
+			goto err_parse;
+		}
 
-	ret = v4l2_async_notifier_parse_fwnode_endpoints(
-		&cio2->pci_dev->dev, &cio2->notifier,
-		sizeof(struct sensor_async_subdev),
-		cio2_fwnode_parse);
-	if (ret < 0)
-		goto out;
+		s_asd->csi2.port = vep.base.port;
+		s_asd->csi2.lanes = vep.bus.mipi_csi2.num_data_lanes;
+
+		ret = v4l2_async_notifier_add_fwnode_remote_subdev(
+			&cio2->notifier, ep, &s_asd->asd);
+		fwnode_handle_put(ep);
+		if (ret)
+			goto err_parse;
+
+		continue;
+
+err_parse:
+		fwnode_handle_put(ep);
+		kfree(s_asd);
+		return ret;
+	}
 
 	/*
 	 * Proceed even without sensors connected to allow the device to
@@ -1512,25 +1527,13 @@ static int cio2_notifier_init(struct cio2_device *cio2)
 	 */
 	cio2->notifier.ops = &cio2_async_ops;
 	ret = v4l2_async_notifier_register(&cio2->v4l2_dev, &cio2->notifier);
-	if (ret) {
+	if (ret)
 		dev_err(&cio2->pci_dev->dev,
 			"failed to register async notifier : %d\n", ret);
-		goto out;
-	}
-
-out:
-	if (ret)
-		v4l2_async_notifier_cleanup(&cio2->notifier);
 
 	return ret;
 }
 
-static void cio2_notifier_exit(struct cio2_device *cio2)
-{
-	v4l2_async_notifier_unregister(&cio2->notifier);
-	v4l2_async_notifier_cleanup(&cio2->notifier);
-}
-
 /**************** Queue initialization ****************/
 static const struct media_entity_operations cio2_media_ops = {
 	.link_validate = v4l2_subdev_link_validate,
@@ -1814,16 +1817,18 @@ static int cio2_pci_probe(struct pci_dev *pci_dev,
 	if (r)
 		goto fail_v4l2_device_unregister;
 
+	v4l2_async_notifier_init(&cio2->notifier);
+
 	/* Register notifier for subdevices we care */
-	r = cio2_notifier_init(cio2);
+	r = cio2_parse_firmware(cio2);
 	if (r)
-		goto fail_cio2_queue_exit;
+		goto fail_clean_notifier;
 
 	r = devm_request_irq(&pci_dev->dev, pci_dev->irq, cio2_irq,
 			     IRQF_SHARED, CIO2_NAME, cio2);
 	if (r) {
 		dev_err(&pci_dev->dev, "failed to request IRQ (%d)\n", r);
-		goto fail;
+		goto fail_clean_notifier;
 	}
 
 	pm_runtime_put_noidle(&pci_dev->dev);
@@ -1831,9 +1836,9 @@ static int cio2_pci_probe(struct pci_dev *pci_dev,
 
 	return 0;
 
-fail:
-	cio2_notifier_exit(cio2);
-fail_cio2_queue_exit:
+fail_clean_notifier:
+	v4l2_async_notifier_unregister(&cio2->notifier);
+	v4l2_async_notifier_cleanup(&cio2->notifier);
 	cio2_queues_exit(cio2);
 fail_v4l2_device_unregister:
 	v4l2_device_unregister(&cio2->v4l2_dev);
@@ -1852,7 +1857,8 @@ static void cio2_pci_remove(struct pci_dev *pci_dev)
 	struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
 
 	media_device_unregister(&cio2->media_dev);
-	cio2_notifier_exit(cio2);
+	v4l2_async_notifier_unregister(&cio2->notifier);
+	v4l2_async_notifier_cleanup(&cio2->notifier);
 	cio2_queues_exit(cio2);
 	cio2_fbpt_exit_dummy(cio2);
 	v4l2_device_unregister(&cio2->v4l2_dev);
-- 
2.11.0


  parent reply	other threads:[~2019-04-05  9:41 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-05  9:41 [PATCH 0/9] Rework V4L2 fwnode parsing; add defaults and avoid iteration Sakari Ailus
2019-04-05  9:41 ` [PATCH 1/9] davinci-vpif: Don't dereference endpoint after putting it, fix refcounting Sakari Ailus
2019-04-05  9:41 ` [PATCH 1/9] davinci-vpif: Fix endpoint refcounting Sakari Ailus
2019-04-05 11:30   ` Ian Arkver
2019-04-05 11:34     ` Sakari Ailus
2019-04-05  9:41 ` [PATCH 2/9] v4l2-async: Use endpoint node, not device node, for fwnode match Sakari Ailus
2019-06-13  0:52   ` Niklas Söderlund
2019-04-05  9:41 ` [PATCH 3/9] v4l2-async: Get fwnode reference when putting it to the notifier's list Sakari Ailus
2019-04-05  9:41 ` [PATCH 4/9] v4l2-async: Add v4l2_async_notifier_add_fwnode_remote_subdev Sakari Ailus
2019-04-05  9:41 ` [PATCH 5/9] omap3isp: Rework OF endpoint parsing Sakari Ailus
2019-04-05  9:41 ` [PATCH 6/9] v4l2-async: Safely clean up an uninitialised notifier Sakari Ailus
2019-04-05  9:41 ` [PATCH 7/9] ipu3-cio2: Clean up notifier's subdev list if parsing endpoints fails Sakari Ailus
2019-04-05  9:41 ` [PATCH 8/9] ipu3-cio2: Proceed with notifier init even if there are no subdevs Sakari Ailus
2019-04-05  9:41 ` Sakari Ailus [this message]
2019-04-05 11:16 ` [PATCH 0/9] Rework V4L2 fwnode parsing; add defaults and avoid iteration Sakari Ailus
2019-04-12 15:33 ` Jacopo Mondi
2019-04-12 20:27   ` Sakari Ailus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190405094127.18975-11-sakari.ailus@linux.intel.com \
    --to=sakari.ailus@linux.intel.com \
    --cc=hverkuil@xs4all.nl \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=niklas.soderlund@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.