From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.1 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, MENTIONS_GIT_HOSTING,SIGNED_OFF_BY,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id D04CCC10F14 for ; Thu, 11 Apr 2019 10:20:23 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9AF7C21871 for ; Thu, 11 Apr 2019 10:20:23 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=megous.com header.i=@megous.com header.b="pKnQJw63" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726905AbfDKKUR (ORCPT ); Thu, 11 Apr 2019 06:20:17 -0400 Received: from vps.xff.cz ([195.181.215.36]:48774 "EHLO vps.xff.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726813AbfDKKUF (ORCPT ); Thu, 11 Apr 2019 06:20:05 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=megous.com; s=mail; t=1554977999; bh=RlyawPV8DdQgLhoOmv75silSjjlBNuFMgDCcJui9Css=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=pKnQJw63o7G2MAK5Wdr3kFoE1R27AJTayB4b5VEHCvXQc3sQ4AqiilAwA2u++oOXL p2YvKUyRna5cIpqZwxeWpYsTaRxJyO0fb8xiPJMI+3HSTZVbw72/OWefciQULQdG4H knB2eQn1fqabs3I2aSVVmNVNQQVNy2dfECEQQbh8= From: megous@megous.com To: linux-sunxi@googlegroups.com, Maxime Ripard , Chen-Yu Tsai , Rob Herring , Linus Walleij Cc: Ondrej Jirman , David Airlie , Daniel Vetter , Mark Rutland , Giuseppe Cavallaro , Alexandre Torgue , Jose Abreu , "David S. Miller" , Maxime Coquelin , Arend van Spriel , Franky Lin , Hante Meuleman , Chi-Hsien Lin , Wright Feng , Kalle Valo , Naveen Gupta , dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-wireless@vger.kernel.org, brcm80211-dev-list.pdl@broadcom.com, brcm80211-dev-list@cypress.com, linux-gpio@vger.kernel.org Subject: [PATCH v3 11/11] [DO NOT MERGE] arm64: dts: allwinner: orange-pi-3: Enable WiFi Date: Thu, 11 Apr 2019 12:19:51 +0200 Message-Id: <20190411101951.30223-12-megous@megous.com> In-Reply-To: <20190411101951.30223-1-megous@megous.com> References: <20190411101951.30223-1-megous@megous.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org From: Ondrej Jirman Orange Pi 3 has AP6256 WiFi/BT module. WiFi part of the module is called bcm43356 and can be used with the brcmfmac driver. The module is powered by the two always on regulators (not AXP805). WiFi uses a PG port with 1.8V voltage level signals. SoC needs to be configured so that it sets up an 1.8V input bias on this port. This is done by the pio driver by reading the vcc-pg-supply voltage. You'll need a fw_bcm43456c5_ag.bin firmware file and nvram.txt configuration that can be found in the Xulongs's repository for H6: https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256 Mainline brcmfmac driver expects the firmware and nvram at the following paths relative to the firmware directory: brcm/brcmfmac43456-sdio.bin brcm/brcmfmac43456-sdio.txt Signed-off-by: Ondrej Jirman --- .../dts/allwinner/sun50i-h6-orangepi-3.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 58a6635c909e..f795362f5b77 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -67,6 +67,26 @@ regulator-always-on; }; + reg_vcc33_wifi: vcc33-wifi { + /* Always on 3.3V regulator for WiFi and BT */ + compatible = "regulator-fixed"; + regulator-name = "vcc33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; + }; + + reg_vcc_wifi_io: vcc-wifi-io { + /* Always on 1.8V/300mA regulator for WiFi and BT IO */ + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_vcc33_wifi>; + }; + /* * The board uses 2.5V RGMII signalling. Power sequence to enable * the phy is to enable GMAC-2V5 and GMAC-3V3 (aldo2) power rails @@ -87,6 +107,14 @@ */ vin-supply = <®_aldo2>; /* GMAC-3V3 */ }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ + post-power-on-delay-ms = <200>; + }; }; &cpu0 { @@ -144,6 +172,25 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vcc33_wifi>; + vqmmc-supply = <®_vcc_wifi_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcm: sdio-wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + &ohci0 { status = "okay"; }; @@ -155,6 +202,7 @@ &pio { vcc-pc-supply = <®_bldo2>; vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_vcc_wifi_io>; }; &r_i2c { -- 2.21.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: megous via linux-sunxi Subject: [PATCH v3 11/11] [DO NOT MERGE] arm64: dts: allwinner: orange-pi-3: Enable WiFi Date: Thu, 11 Apr 2019 12:19:51 +0200 Message-ID: <20190411101951.30223-12-megous@megous.com> References: <20190411101951.30223-1-megous@megous.com> Reply-To: megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <20190411101951.30223-1-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Maxime Ripard , Chen-Yu Tsai , Rob Herring , Linus Walleij Cc: Ondrej Jirman , David Airlie , Daniel Vetter , Mark Rutland , Giuseppe Cavallaro , Alexandre Torgue , Jose Abreu , "David S. Miller" , Maxime Coquelin , Arend van Spriel , Franky Lin , Hante Meuleman , Chi-Hsien Lin , Wright Feng , Kalle Valo , Naveen Gupta , dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-stm32-XDFAJ8BFU24N7RejjzZ/Li2xQDfSxrLKVpNB7YpNyf8@public.gmane.org, linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, brcm802 List-Id: linux-gpio@vger.kernel.org From: Ondrej Jirman Orange Pi 3 has AP6256 WiFi/BT module. WiFi part of the module is called bcm43356 and can be used with the brcmfmac driver. The module is powered by the two always on regulators (not AXP805). WiFi uses a PG port with 1.8V voltage level signals. SoC needs to be configured so that it sets up an 1.8V input bias on this port. This is done by the pio driver by reading the vcc-pg-supply voltage. You'll need a fw_bcm43456c5_ag.bin firmware file and nvram.txt configuration that can be found in the Xulongs's repository for H6: https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256 Mainline brcmfmac driver expects the firmware and nvram at the following paths relative to the firmware directory: brcm/brcmfmac43456-sdio.bin brcm/brcmfmac43456-sdio.txt Signed-off-by: Ondrej Jirman --- .../dts/allwinner/sun50i-h6-orangepi-3.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 58a6635c909e..f795362f5b77 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -67,6 +67,26 @@ regulator-always-on; }; + reg_vcc33_wifi: vcc33-wifi { + /* Always on 3.3V regulator for WiFi and BT */ + compatible = "regulator-fixed"; + regulator-name = "vcc33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; + }; + + reg_vcc_wifi_io: vcc-wifi-io { + /* Always on 1.8V/300mA regulator for WiFi and BT IO */ + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_vcc33_wifi>; + }; + /* * The board uses 2.5V RGMII signalling. Power sequence to enable * the phy is to enable GMAC-2V5 and GMAC-3V3 (aldo2) power rails @@ -87,6 +107,14 @@ */ vin-supply = <®_aldo2>; /* GMAC-3V3 */ }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ + post-power-on-delay-ms = <200>; + }; }; &cpu0 { @@ -144,6 +172,25 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vcc33_wifi>; + vqmmc-supply = <®_vcc_wifi_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcm: sdio-wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + &ohci0 { status = "okay"; }; @@ -155,6 +202,7 @@ &pio { vcc-pc-supply = <®_bldo2>; vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_vcc_wifi_io>; }; &r_i2c { -- 2.21.0 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-10.2 required=3.0 tests=DKIMWL_WL_HIGH, DKIM_ADSP_DISCARD,DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,MENTIONS_GIT_HOSTING,SIGNED_OFF_BY,SPF_PASS, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 74ACEC10F13 for ; Thu, 11 Apr 2019 10:22:37 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 43C7320818 for ; Thu, 11 Apr 2019 10:22:37 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="dDtNKXoz"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=megous.com header.i=@megous.com header.b="pKnQJw63" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 43C7320818 Authentication-Results: mail.kernel.org; dmarc=fail (p=reject dis=none) header.from=megous.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=Er4x+h3yyWGs3ugm522ZT2Yg5pBNbqhrhXr8VTkBdHg=; b=dDtNKXoz2Sb2Zg iN6/AWG01NLharpO5oTalHC5fJ88uKu7lBs9OlJvPWUsl7fZaxArtyJ4fVMdy8dTJ1UFIsv3I1mU7 9RQvfPoDwaWNCAEiUjv49vVPf9pyHWGjwAYLVHwTMbsleUZp8XGpz0Zc5RkBZaxBDXzvweeEl4k4s +3dVkN/Q6ud7GLhZSXkgxgPziBbSanbW0KUfiOb77IW09NpMov8Cdtr3dOVlvhvUMDtmBU9SC8WKg Dfwcha9fKYKXBqd8W9m0j+ePLMUAb4fNQK/uMHibU05k75t862sQzlYnkDWNO9Z1iTVTeAZuSz5Uc S1RvCTJ4iXIQUi6gvT4A==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1hEWqp-0001tG-Ah; Thu, 11 Apr 2019 10:22:35 +0000 Received: from vps.xff.cz ([195.181.215.36]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1hEWoP-0006Qy-2r for linux-arm-kernel@lists.infradead.org; Thu, 11 Apr 2019 10:20:08 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=megous.com; s=mail; t=1554977999; bh=RlyawPV8DdQgLhoOmv75silSjjlBNuFMgDCcJui9Css=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=pKnQJw63o7G2MAK5Wdr3kFoE1R27AJTayB4b5VEHCvXQc3sQ4AqiilAwA2u++oOXL p2YvKUyRna5cIpqZwxeWpYsTaRxJyO0fb8xiPJMI+3HSTZVbw72/OWefciQULQdG4H knB2eQn1fqabs3I2aSVVmNVNQQVNy2dfECEQQbh8= From: megous@megous.com To: linux-sunxi@googlegroups.com, Maxime Ripard , Chen-Yu Tsai , Rob Herring , Linus Walleij Subject: [PATCH v3 11/11] [DO NOT MERGE] arm64: dts: allwinner: orange-pi-3: Enable WiFi Date: Thu, 11 Apr 2019 12:19:51 +0200 Message-Id: <20190411101951.30223-12-megous@megous.com> In-Reply-To: <20190411101951.30223-1-megous@megous.com> References: <20190411101951.30223-1-megous@megous.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190411_032005_956400_2BD7658A X-CRM114-Status: GOOD ( 12.18 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Ondrej Jirman , Mark Rutland , David Airlie , Chi-Hsien Lin , dri-devel@lists.freedesktop.org, linux-stm32@st-md-mailman.stormreply.com, brcm80211-dev-list@cypress.com, Jose Abreu , Naveen Gupta , devicetree@vger.kernel.org, Arend van Spriel , Alexandre Torgue , Hante Meuleman , linux-gpio@vger.kernel.org, Wright Feng , Giuseppe Cavallaro , linux-arm-kernel@lists.infradead.org, Franky Lin , Maxime Coquelin , brcm80211-dev-list.pdl@broadcom.com, netdev@vger.kernel.org, linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org, Kalle Valo , Daniel Vetter , "David S. Miller" Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org From: Ondrej Jirman Orange Pi 3 has AP6256 WiFi/BT module. WiFi part of the module is called bcm43356 and can be used with the brcmfmac driver. The module is powered by the two always on regulators (not AXP805). WiFi uses a PG port with 1.8V voltage level signals. SoC needs to be configured so that it sets up an 1.8V input bias on this port. This is done by the pio driver by reading the vcc-pg-supply voltage. You'll need a fw_bcm43456c5_ag.bin firmware file and nvram.txt configuration that can be found in the Xulongs's repository for H6: https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256 Mainline brcmfmac driver expects the firmware and nvram at the following paths relative to the firmware directory: brcm/brcmfmac43456-sdio.bin brcm/brcmfmac43456-sdio.txt Signed-off-by: Ondrej Jirman --- .../dts/allwinner/sun50i-h6-orangepi-3.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 58a6635c909e..f795362f5b77 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -67,6 +67,26 @@ regulator-always-on; }; + reg_vcc33_wifi: vcc33-wifi { + /* Always on 3.3V regulator for WiFi and BT */ + compatible = "regulator-fixed"; + regulator-name = "vcc33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; + }; + + reg_vcc_wifi_io: vcc-wifi-io { + /* Always on 1.8V/300mA regulator for WiFi and BT IO */ + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_vcc33_wifi>; + }; + /* * The board uses 2.5V RGMII signalling. Power sequence to enable * the phy is to enable GMAC-2V5 and GMAC-3V3 (aldo2) power rails @@ -87,6 +107,14 @@ */ vin-supply = <®_aldo2>; /* GMAC-3V3 */ }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ + post-power-on-delay-ms = <200>; + }; }; &cpu0 { @@ -144,6 +172,25 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vcc33_wifi>; + vqmmc-supply = <®_vcc_wifi_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcm: sdio-wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + &ohci0 { status = "okay"; }; @@ -155,6 +202,7 @@ &pio { vcc-pc-supply = <®_bldo2>; vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_vcc_wifi_io>; }; &r_i2c { -- 2.21.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel