* [v2 PATCH] thermal: rcar_gen3_thermal: Add Standby/Reset Mode support
@ 2018-11-06 6:08 Nguyen An Hoan
2019-04-11 19:45 ` Niklas Söderlund
0 siblings, 1 reply; 3+ messages in thread
From: Nguyen An Hoan @ 2018-11-06 6:08 UTC (permalink / raw)
To: linux-renesas-soc, geert+renesas, wsa
Cc: niklas.soderlund, kuninori.morimoto.gx, yoshihiro.shimoda.uh,
h-inayoshi, nv-dung, na-hoan, cv-dong
From: Hoan Nguyen An <na-hoan@jinso.co.jp>
According to the hardware manual, Gen3 supports Standby/Reset mode.
Add this function, and we should use this function while suspend
to reduce the energy consumption.
Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
---
drivers/thermal/rcar_gen3_thermal.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 7aed533..e654519 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -447,11 +447,32 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
return ret;
}
+static int rcar_gen3_thermal_reset(struct rcar_gen3_thermal_priv* priv)
+{
+ unsigned int i;
+ u32 reg_val;
+
+ for (i = 0; i < priv->num_tscs; i++) {
+ struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+ rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, 0);
+ rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
+
+ reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
+ rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val & ~THCTR_THSST);
+ }
+
+ usleep_range(1000, 2000);
+
+ return 0;
+}
+
static int __maybe_unused rcar_gen3_thermal_suspend(struct device *dev)
{
struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
- rcar_thermal_irq_set(priv, false);
+ /* Reset to enter standby mode */
+ rcar_gen3_thermal_reset(priv);
return 0;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [v2 PATCH] thermal: rcar_gen3_thermal: Add Standby/Reset Mode support
2018-11-06 6:08 [v2 PATCH] thermal: rcar_gen3_thermal: Add Standby/Reset Mode support Nguyen An Hoan
@ 2019-04-11 19:45 ` Niklas Söderlund
2019-04-16 3:16 ` Hoan
0 siblings, 1 reply; 3+ messages in thread
From: Niklas Söderlund @ 2019-04-11 19:45 UTC (permalink / raw)
To: Nguyen An Hoan
Cc: linux-renesas-soc, geert+renesas, wsa, kuninori.morimoto.gx,
yoshihiro.shimoda.uh, h-inayoshi, nv-dung, cv-dong
Hi Hoan,
Thanks for your work.
Sorry for very late review, somehow this got lost in my inbox.
On 2018-11-06 15:08:26 +0900, Nguyen An Hoan wrote:
> From: Hoan Nguyen An <na-hoan@jinso.co.jp>
>
> According to the hardware manual, Gen3 supports Standby/Reset mode.
> Add this function, and we should use this function while suspend
> to reduce the energy consumption.
>
> Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Nice clean commit and matches the datasheet,
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Interrupts fire both before and after suspending as expected,
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/thermal/rcar_gen3_thermal.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
> index 7aed533..e654519 100644
> --- a/drivers/thermal/rcar_gen3_thermal.c
> +++ b/drivers/thermal/rcar_gen3_thermal.c
> @@ -447,11 +447,32 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
> return ret;
> }
>
> +static int rcar_gen3_thermal_reset(struct rcar_gen3_thermal_priv* priv)
> +{
> + unsigned int i;
> + u32 reg_val;
> +
> + for (i = 0; i < priv->num_tscs; i++) {
> + struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
> +
> + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, 0);
> + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
> +
> + reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
> + rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val & ~THCTR_THSST);
> + }
> +
> + usleep_range(1000, 2000);
> +
> + return 0;
> +}
> +
> static int __maybe_unused rcar_gen3_thermal_suspend(struct device *dev)
> {
> struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
>
> - rcar_thermal_irq_set(priv, false);
> + /* Reset to enter standby mode */
> + rcar_gen3_thermal_reset(priv);
>
> return 0;
> }
> --
> 2.7.4
>
--
Regards,
Niklas Söderlund
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [v2 PATCH] thermal: rcar_gen3_thermal: Add Standby/Reset Mode support
2019-04-11 19:45 ` Niklas Söderlund
@ 2019-04-16 3:16 ` Hoan
0 siblings, 0 replies; 3+ messages in thread
From: Hoan @ 2019-04-16 3:16 UTC (permalink / raw)
To: Niklas Söderlund, Zhang Rui, edubezval, Daniel Lezcano
Cc: linux-renesas-soc, geert+renesas, wsa, kuninori.morimoto.gx,
yoshihiro.shimoda.uh, h-inayoshi, nv-dung, cv-dong
Dear Niklas-san
Always thanks for your helps!
Sorry for forgetting CC maintainer. CC Maintainers!
On 2019/04/12 4:45, Niklas Söderlund wrote:
> Hi Hoan,
>
> Thanks for your work.
>
> Sorry for very late review, somehow this got lost in my inbox.
>
> On 2018-11-06 15:08:26 +0900, Nguyen An Hoan wrote:
>> From: Hoan Nguyen An <na-hoan@jinso.co.jp>
>>
>> According to the hardware manual, Gen3 supports Standby/Reset mode.
>> Add this function, and we should use this function while suspend
>> to reduce the energy consumption.
>>
>> Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
> Nice clean commit and matches the datasheet,
>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>
> Interrupts fire both before and after suspending as expected,
>
> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>
>> ---
>> drivers/thermal/rcar_gen3_thermal.c | 23 ++++++++++++++++++++++-
>> 1 file changed, 22 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
>> index 7aed533..e654519 100644
>> --- a/drivers/thermal/rcar_gen3_thermal.c
>> +++ b/drivers/thermal/rcar_gen3_thermal.c
>> @@ -447,11 +447,32 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
>> return ret;
>> }
>>
>> +static int rcar_gen3_thermal_reset(struct rcar_gen3_thermal_priv* priv)
>> +{
>> + unsigned int i;
>> + u32 reg_val;
>> +
>> + for (i = 0; i < priv->num_tscs; i++) {
>> + struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
>> +
>> + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, 0);
>> + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
>> +
>> + reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
>> + rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val & ~THCTR_THSST);
>> + }
>> +
>> + usleep_range(1000, 2000);
>> +
>> + return 0;
>> +}
>> +
>> static int __maybe_unused rcar_gen3_thermal_suspend(struct device *dev)
>> {
>> struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
>>
>> - rcar_thermal_irq_set(priv, false);
>> + /* Reset to enter standby mode */
>> + rcar_gen3_thermal_reset(priv);
>>
>> return 0;
>> }
>> --
>> 2.7.4
>>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-04-16 3:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-06 6:08 [v2 PATCH] thermal: rcar_gen3_thermal: Add Standby/Reset Mode support Nguyen An Hoan
2019-04-11 19:45 ` Niklas Söderlund
2019-04-16 3:16 ` Hoan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.