From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Date: Fri, 12 Apr 2019 14:40:43 +0800 Subject: [U-Boot] [RESEND-2 PATCH 4/4] sunxi: Enable EMAC on the Bananapi M3 In-Reply-To: <20190412064043.29017-1-wens@kernel.org> References: <20190412064043.29017-1-wens@kernel.org> Message-ID: <20190412064043.29017-5-wens@kernel.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Chen-Yu Tsai The Bananapi M3 has an RTL8211E PHY connected to the EMAC using RGMII. The PHY is powered by DCDC1 through SW @ 3.3V. This patch enables the EMAC and Realtek PHY drivers in the defconfig. The device tree file already has the EMAC enabled. Signed-off-by: Chen-Yu Tsai --- configs/Sinovoip_BPI_M3_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig index 79743a9c9a51..bb2dbb5dd5c2 100644 --- a/configs/Sinovoip_BPI_M3_defconfig +++ b/configs/Sinovoip_BPI_M3_defconfig @@ -21,6 +21,8 @@ CONFIG_CONSOLE_MUX=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3" +CONFIG_PHY_REALTEK=y +CONFIG_SUN8I_EMAC=y CONFIG_AXP_DCDC5_VOLT=1200 CONFIG_AXP_DLDO3_VOLT=2500 CONFIG_AXP_SW_ON=y -- 2.20.1