From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Fri, 12 Apr 2019 12:30:43 -0400 Subject: [U-Boot] [U-Boot, v2, 1/4] board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM In-Reply-To: <20190227075938.7180-2-faiz_abbas@ti.com> References: <20190227075938.7180-2-faiz_abbas@ti.com> Message-ID: <20190412163043.GD4664@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Feb 27, 2019 at 01:29:35PM +0530, Faiz Abbas wrote: > From: Franklin S Cooper Jr > > By default VOUT3 occupies the pins required for NAND. Therefore, create > a seperate entry that can be use to reconfigure these pins to work for > NAND. > > On the EVM SWITCH 8 pins 0 and 1 will be used to determine if NAND is > enabled or not. For NAND to be selected pin 0 should be on and pin 1 > should be off. Any other combination will assume NAND shouldn't be > enabled. > > Signed-off-by: Franklin S Cooper Jr > Signed-off-by: Faiz Abbas Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: