Hi,

On Thu, Apr 11, 2019 at 11:44:19PM +0200, Clément Péron wrote:
> Allwinner H6 has a SPDIF controller with an increase of the fifo
> size and the possibility to output the master clock.
> However it's still compatible with the already existing driver for
> Allwiner H3.
>
> Add this compatible in the device-tree bindings documentation.

How was this tested?

After looking at the datasheet, it looks like it's still significantly
different. In particular:

  - The MCLK divider isn't at the same offset
  - The bits to flush the FIFO aren't at the same offset
  - The FIFO trigger levels aren't at the same offset
  - The FIFO status register layout is almost entirely different

So it doesn't really look compatible to me

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com