From mboxrd@z Thu Jan  1 00:00:00 1970
From: AKASHI Takahiro <takahiro.akashi@linaro.org>
Date: Wed, 17 Apr 2019 16:43:51 +0900
Subject: [U-Boot] [RFC v3 08/10] cmd: bootefi: carve out do_boot_efi()
 from do_bootefi()
In-Reply-To: <88282321-e621-b2c0-5e57-c54761c54e8c@gmx.de>
References: <20190416042428.5007-1-takahiro.akashi@linaro.org>
 <20190416042428.5007-9-takahiro.akashi@linaro.org>
 <88282321-e621-b2c0-5e57-c54761c54e8c@gmx.de>
Message-ID: <20190417074350.GS7158@linaro.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Tue, Apr 16, 2019 at 07:31:28AM +0200, Heinrich Schuchardt wrote:
> On 4/16/19 6:24 AM, AKASHI Takahiro wrote:
> >This is a preparatory patch for reworking do_bootefi() in later patch.
> >All the non-boot-manager-based (that is, bootefi <addr>) code is put
> >into one function, do_boot_efi().
> >
> >Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> >---
> >  cmd/bootefi.c | 126 ++++++++++++++++++++++++++++----------------------
> >  1 file changed, 70 insertions(+), 56 deletions(-)
> >
> >diff --git a/cmd/bootefi.c b/cmd/bootefi.c
> >index 7cc6f0ee5ac8..f14966961b23 100644
> >--- a/cmd/bootefi.c
> >+++ b/cmd/bootefi.c
> >@@ -355,6 +355,75 @@ static int do_efibootmgr(const char *fdt_opt)
> >  	return 0;
> >  }
> >
> >+/*
> >+ * do_boot_efi() - execute EFI binary from command line
> 
> Having a function do_boot_efi() and a function do_bootefi() is a bit
> confusing. Please, use something different, like efi_do_boot().

Okay, but I don't like that any function in this file starts with
"efi_".
So do_bootefi_image(). This will reflect more precise functionality.

-Takahiro Akashi

> Otherwise
> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
> 
> >+ *
> >+ * @image_opt:	string of image start address
> >+ * @fdt_opt:	string of fdt start address
> >+ * Return:	status code
> >+ *
> >+ * Set up memory image for the binary to be loaded, prepare
> >+ * device path and then call do_bootefi_exec() to execute it.
> >+ */
> >+static int do_boot_efi(const char *image_opt, const char *fdt_opt)
> >+{
> >+	unsigned long addr;
> >+	char *saddr;
> >+	efi_status_t ret;
> >+	unsigned long fdt_addr;
> >+
> >+	/* Allow unaligned memory access */
> >+	allow_unaligned();
> >+
> >+	switch_to_non_secure_mode();
> >+
> >+	/* Initialize EFI drivers */
> >+	ret = efi_init_obj_list();
> >+	if (ret != EFI_SUCCESS) {
> >+		printf("Error: Cannot initialize UEFI sub-system, r = %lu\n",
> >+		       ret & ~EFI_ERROR_MASK);
> >+		return CMD_RET_FAILURE;
> >+	}
> >+
> >+	ret = efi_install_fdt(fdt_opt);
> >+	if (ret == EFI_INVALID_PARAMETER)
> >+		return CMD_RET_USAGE;
> >+	else if (ret != EFI_SUCCESS)
> >+		return CMD_RET_FAILURE;
> >+
> >+#ifdef CONFIG_CMD_BOOTEFI_HELLO
> >+	if (!strcmp(argv[1], "hello")) {
> >+		ulong size = __efi_helloworld_end - __efi_helloworld_begin;
> >+
> >+		saddr = env_get("loadaddr");
> >+		if (saddr)
> >+			addr = simple_strtoul(saddr, NULL, 16);
> >+		else
> >+			addr = CONFIG_SYS_LOAD_ADDR;
> >+		memcpy(map_sysmem(addr, size), __efi_helloworld_begin, size);
> >+	} else
> >+#endif
> >+	{
> >+		saddr = argv[1];
> >+
> >+		addr = simple_strtoul(saddr, NULL, 16);
> >+		/* Check that a numeric value was passed */
> >+		if (!addr && *saddr != '0')
> >+			return CMD_RET_USAGE;
> >+	}
> >+
> >+	printf("## Starting EFI application at %08lx ...\n", addr);
> >+	ret = do_bootefi_exec(map_sysmem(addr, 0), bootefi_device_path,
> >+			      bootefi_image_path);
> >+	printf("## Application terminated, r = %lu\n",
> >+	       ret & ~EFI_ERROR_MASK);
> >+
> >+	if (ret != EFI_SUCCESS)
> >+		return CMD_RET_FAILURE;
> >+	else
> >+		return CMD_RET_SUCCESS;
> >+}
> >+
> >  #ifdef CONFIG_CMD_BOOTEFI_SELFTEST
> >  static efi_status_t bootefi_run_prepare(const char *load_options_path,
> >  		struct efi_device_path *device_path,
> >@@ -483,11 +552,6 @@ static int do_efi_selftest(const char *fdt_opt)
> >  /* Interpreter command to boot an arbitrary EFI image from memory */
> >  static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> >  {
> >-	unsigned long addr;
> >-	char *saddr;
> >-	efi_status_t r;
> >-	unsigned long fdt_addr;
> >-
> >  	if (argc < 2)
> >  		return CMD_RET_USAGE;
> >
> >@@ -498,57 +562,7 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> >  		return do_efi_selftest(argc > 2 ? argv[2] : NULL);
> >  #endif
> >
> >-	/* Allow unaligned memory access */
> >-	allow_unaligned();
> >-
> >-	switch_to_non_secure_mode();
> >-
> >-	/* Initialize EFI drivers */
> >-	r = efi_init_obj_list();
> >-	if (r != EFI_SUCCESS) {
> >-		printf("Error: Cannot set up EFI drivers, r = %lu\n",
> >-		       r & ~EFI_ERROR_MASK);
> >-		return CMD_RET_FAILURE;
> >-	}
> >-
> >-	r = fdt_install_fdt(argc > 2 ? argv[2] : NULL);
> >-	if (r == EFI_INVALID_PARAMETER)
> >-		return CMD_RET_USAGE;
> >-	else if (r != EFI_SUCCESS)
> >-		return CMD_RET_FAILURE;
> >-
> >-#ifdef CONFIG_CMD_BOOTEFI_HELLO
> >-	if (!strcmp(argv[1], "hello")) {
> >-		ulong size = __efi_helloworld_end - __efi_helloworld_begin;
> >-
> >-		saddr = env_get("loadaddr");
> >-		if (saddr)
> >-			addr = simple_strtoul(saddr, NULL, 16);
> >-		else
> >-			addr = CONFIG_SYS_LOAD_ADDR;
> >-		memcpy(map_sysmem(addr, size), __efi_helloworld_begin, size);
> >-	} else
> >-#endif
> >-	{
> >-		saddr = argv[1];
> >-
> >-		addr = simple_strtoul(saddr, NULL, 16);
> >-		/* Check that a numeric value was passed */
> >-		if (!addr && *saddr != '0')
> >-			return CMD_RET_USAGE;
> >-
> >-	}
> >-
> >-	printf("## Starting EFI application at %08lx ...\n", addr);
> >-	r = do_bootefi_exec(map_sysmem(addr, 0), bootefi_device_path,
> >-			    bootefi_image_path);
> >-	printf("## Application terminated, r = %lu\n",
> >-	       r & ~EFI_ERROR_MASK);
> >-
> >-	if (r != EFI_SUCCESS)
> >-		return 1;
> >-	else
> >-		return 0;
> >+	return do_boot_efi(argv[1], argc > 2 ? argv[2] : NULL);
> >  }
> >
> >  #ifdef CONFIG_SYS_LONGHELP
> >
>